Skip to contentSkip to conversation

2.6.34 -> 3.0.23 regression?

DISCUSSION Arnd Hannemann 1 participant 1 message Mar 6, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

I upgraded a router box from kernel 2.6.34 to 3.0.23. After the upgrade my proxy redirect was not working anymore until I manually put the LAN interface (br0) in promisc mode.

Is it expected behavior that I need to set the interface into PROMISC mode in order to get DNAT in PREROUTING to work?
With kernel 2.6.34 this was not needed...

Details:
192.168.1.1 is a router box and default gateway for clients
connected to 192.168.1.0/24 via br0,
connected to internet via wlan0,
192.168.1.2 is a proxy server running squid on port 3128

Iptables rules -t nat (simplified)
Chain PREROUTING (policy ACCEPT)

target     prot opt source               destination
DNAT       tcp  -- !192.168.1.2          0.0.0.0/0           tcp dpt:80 to:192.168.1.2:3128

Chain POSTROUTING (policy ACCEPT)

target     prot opt source               destination
SNAT       tcp  --  192.168.1.0/24       0.0.0.0/0           tcp dpt:3128 to:192.168.1.1

Best regards
Arnd