Toolchain for Microblaze
Hello all,
I just found on the gcc web site (
http://gcc.gnu.org/gcc-4.6/changes.html ) the following message:
Quoted 8 lines
MicroBlaze
* Support has been added for the Xilinx MicroBlaze softcore processor (microblaze-elf) embedded target. This configurable processor is supported on several Xilinx Spartan and Virtex FPGAs.
This sounds like good news. Maybe we can get rid of the prebuild Xilinx Toolchain.
Unfortunatelly, I don't have any experience in building toolchains. A first try building it as internal toolchain with almost standard settings ended with an aclocal error;-(
Can anyone try building it?
Kind regards
Stephan
Signature · 9 lines
reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120311/b7a633ca/attachment.html>
Quoted 31 lines · Stephan Hoffmann
Hello all,
I just found on the gcc web site ( http://gcc.gnu.org/gcc-4.6/changes.html ) the following message:
MicroBlaze
Support has been added for the Xilinx MicroBlaze softcore processor (microblaze-elf) embedded target. This configurable processor is supported on several Xilinx Spartan and Virtex FPGAs.
This sounds like good news. Maybe we can get rid of the prebuild Xilinx Toolchain.
Unfortunatelly, I don't have any experience in building toolchains. A first try building it as internal toolchain with almost standard settings ended with an aclocal error;-(
Can anyone try building it?
Kind regards
Stephan
--
reLinux ? ? - ? ?Stephan Hoffmann
Am Schmidtgrund 124 ? ?50765 K?ln
Tel. +49.221.95595-19 ? ?Fax: -64
www.reLinux.de ? ? sho at reLinux.de
Quoted 4 lines
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
I agree it would be nice. Although, I have tried to get this to work with no success. The following repos may be of some help (have not had time to test them.)
Spenser
--
Spenser Gilliland
Computer Engineer
Doctoral Candidate
Am 12.03.2012 02:37, schrieb Spenser Gilliland:
Quoted 7 lines
I agree it would be nice. Although, I have tried to get this to work with no success. The following repos may be of some help (have not had time to test them.)
Spenser
I just thought about trying this old 4.1.2 version when I found out that gnu now supports Microblaze in 4.6. I hope someone familiar in building toolchains can help building it.
Stephan
Quoted 38 lines · Stephan Hoffmann
Quoted 35 lines
Hello all,
I just found on the gcc web site ( http://gcc.gnu.org/gcc-4.6/changes.html ) the following message:
MicroBlaze
Support has been added for the Xilinx MicroBlaze softcore processor (microblaze-elf) embedded target. This configurable processor is supported on several Xilinx Spartan and Virtex FPGAs.
This sounds like good news. Maybe we can get rid of the prebuild Xilinx Toolchain.
Unfortunatelly, I don't have any experience in building toolchains. A first try building it as internal toolchain with almost standard settings ended with an aclocal error;-(
Can anyone try building it?
Kind regards
Stephan
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 4 lines
reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de