Skip to contentSkip to conversation

M-audio fasttrack pro, input device index

DISCUSSION David Henningsson 2 participants 2 messages Mar 27, 2012

lore
Share & tools
lore
#0 lore raw

Hi,

M-Audio fasttrack pro has two stereo outputs and one stereo input. It looks like the input sometimes shows up at device 0 and sometimes at device 1. I e, a device string would sometimes be hw:1,0,0 and sometimes hw:1,1,0. (Assuming the card index is 1)

Do we know if there is a reason behind this behaviour, or should we just try both device strings?

I don't have this device myself, so I don't know if it's consistent given a specific physical device, if it differs between kernel versions, or anything else. I've just seen both.

Example alsa-info:
https://launchpadlibrarian.net/45386782/alsa-info.txt.5TIcWGnRjL

Signature · 2 lines
David Henningsson, Canonical Ltd.
http://launchpad.net/~diwic
#1 lore raw
Quoted 1 line · David Henningsson

M-Audio fasttrack pro has two stereo outputs and one stereo input.

It has two stereo inputs, analog and digital, one of which is disabled depending on the device_setup module parameter.

Quoted 2 lines

It looks like the input sometimes shows up at device 0 and sometimes at device 1.

This looks like a side effect of that hack.

Regards,
Clemens