OMAP4 TWL6030 uv_to_vsel warning

Dear mailing-list,

I am working with the 3.3 kernel on an OMAP4430 with a TWL6030. I have many warning like the following:

twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660

I would like to clarify this and eventually "remove" this warning.
I have checked omap_twl.c file. It seems that twl6030_uv_to_vsel() function have a special branch when uv is equal to 1350000 uV and when bigger than 1350000 uV it print the error message.

On the same file I could see that on_volt (and the onlp_volt) are set by default to 1375000 uV for the OMAP4.

On the datasheet of the TWL6030 I could see that the level is 1367400 uV. 1350000 nor than 1375000 are invalid level.

Don't you thin that 1375000 and 1350000 should be the same value ?
If we could change the default on_volt (and the onlp_volt) for the OMAP4 to 1350000 the Warning message will then be removed, and the effective level on the TWL6030 will still stay to 1367400 uV.

Any comment are welcome !

Patrick