AF9035/AF9033 development

Here is TODO list I took from mail I wrote 31.3.2012:

* fix af9033 IF freq control (now Zero-IF only)
DONE

* change firmware download to use new firmware syntax DONE

* dual tuner support

* check if IT9035 is enough similar (My personal suspicion is that integrated tuner is only main difference, whilst USB-interface and demod are same. But someone has told that it is quite different design though.) DONE. It is similar. AF9035 code changes are done. New tuner driver still needed.

* implement SNR, BER and USB counters
partly DONE!

* implement remote controller

Remote controller and dual tuner support are main missing features. I will try implement remote controller next, maybe later tonight.

regards
Antti

http://palosaari.fi/

I failed that. After many hours of hacking I did not succeed to disable HID. It is very weird since HID outputs some random letters even there is no keytable loaded to device and some other than device own NEC remote used. I can read raw key codes from the firmware, but as the HID is still there it is useless. I even tried to load some garbage key tables to kill HID - but no success. So I will give up as now. I think it is possible to edit eeprom to kill HID, but that kind of eeprom modification is no way to go.

regards
Antti

http://palosaari.fi/