build error on core-image-sato-sdk

DISCUSSION jfabernathy 4 participants 7 messages Apr 9, 2012 – Apr 10, 2012

Share & tools

jfabernathy

author

2012-04-09 20:33 UTC #0 lore raw

at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.

Any ideas?

ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in: /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810
Log data follows:

| mkdosfs: seek failed
| mkdosfs 2.10 (22 Sep 2003)
| ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)

NOTE: package core-image-sato-sdk-1.0-r0: task do_bootimg: Failed
ERROR: Task 9 (/home/jim/poky/meta/recipes-sato/images/core-image-sato-sdk.bb, do_bootimg) failed with exit code '1'
ERROR: '/home/jim/poky/meta/recipes-sato/images/core-image-sato-sdk.bb' failed jim@ubuntu-x64:/build/cdv-edison$

Darren Hart

2012-04-09 22:15 UTC #1 lore raw

Quoted 7 lines · jfabernathy

at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.
Any ideas?

Quoted 7 lines

ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 Log data follows:
| mkdosfs: seek failed

Interesting.

Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.

Also, please include the HEAD of your poky edison tree.

Thanks,

Signature · 3 lines

Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel

James Abernathy

author

2012-04-10 00:01 UTC #2 lore raw

Quoted 20 lines · Darren Hart

Quoted 9 lines · jfabernathy
at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.
Any ideas?
ERROR: Function 'build_boot_bin' failed (see
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810
Quoted 3 lines
for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810
Quoted 2 lines
Log data follows:
| mkdosfs: seek failed

Quoted 8 lines

Interesting.
Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.
Also, please include the HEAD of your poky edison tree.
Is there a way to retreive the OE-Build Configuration blob after it rolls

off the screen? Or should I just rerun and capture it then?

Quoted 7 lines

Thanks,
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel

Christopher Larson

2012-04-10 00:15 UTC #3 lore raw

See the cooker.log.* files in the tmp (or build) directory.

Signature · 1 line

Christopher Larson

Quoted 43 lines · James Abernathy

Quoted 18 lines · Darren Hart
Quoted 7 lines · jfabernathy
at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.
Any ideas?
Quoted 7 lines
ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 Log data follows:
| mkdosfs: seek failed
Quoted 7 lines
Interesting.
Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.
Also, please include the HEAD of your poky edison tree.
Is there a way to retreive the OE-Build Configuration blob after it rolls off the screen? Or should I just rerun and capture it then?
Quoted 6 lines
Thanks,
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
_______________________________________________
yocto mailing list
[email protected] (mailto:[email protected])
https://lists.yoctoproject.org/listinfo/yocto

Joshua Immanuel

2012-04-10 07:00 UTC #4 lore raw

In reply to Darren Hart

Hello Darren,

Quoted 8 lines · Darren Hart

Quoted 7 lines
ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 Log data follows:
| mkdosfs: seek failed

Quoted 4 lines

Interesting.
Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.

I am familiar with this error ;) I have mentioned this in the comments section of bug #2138.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=2138#c26

Regards

Signature · 3 lines

Joshua Immanuel
HiPro IT Solutions Private Limited
http://hipro.co.in

jfabernathy

author

2012-04-10 12:44 UTC #5 lore raw

In reply to Darren Hart

Quoted 16 lines · Darren Hart

Quoted 7 lines · jfabernathy
at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.
Any ideas?
Quoted 7 lines
ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 Log data follows:
| mkdosfs: seek failed

Quoted 4 lines

Interesting.
Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.

OE Build Configuration:

BB_VERSION        = "1.13.3"
TARGET_ARCH       = "i586"
TARGET_OS         = "linux"
MACHINE           = "cedartrail"
DISTRO            = "poky"
DISTRO_VERSION    = "1.1.1"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
meta
meta-yocto        = "edison:0fbd6a161576b2cafa8583adde0ffb15347c884a"
meta-cedartrail   = "edison:072c6e99616c25c31521e05560433c67fb2a0292"
meta-jfa          = "<unknown>:<unknown>"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks

Quoted 1 line

Also, please include the HEAD of your poky edison tree.

Not sure what git command you want, but here is the git show:

jim@ubuntu-x64:~/poky$ git show edison
commit 0fbd6a161576b2cafa8583adde0ffb15347c884a
Author: Elizabeth Flanagan <[email protected]>
Date:   Wed Mar 14 15:49:33 2012 -0700

poky.conf: Bumping SKD_VERSION

SDK_VERSION needs a bump for 1.1.1 release

Signed-off-by Elizabeth Flanagan <[email protected]>

meta-yocto/conf/distro/poky.conf +1 -1

index b7c167d..accbb26 100644
@@ -2,7 +2,7 @@ DISTRO = "poky"
 DISTRO_NAME = "Yocto (Built by Poky 6.0.1)"
 DISTRO_VERSION = "1.1.1"
 SDK_VENDOR = "-pokysdk"
-SDK_VERSION := "${@'${DISTRO_VERSION}'.replace('snapshot-${DATE}','snapshot')}"
+SDK_VERSION := "${DISTRO_VERSION}"
 
 MAINTAINER = "Poky <[email protected]>"

Quoted 2 lines

Thanks,

Darren Hart

2012-04-10 14:14 UTC #6 lore raw

Quoted 40 lines · jfabernathy

Quoted 16 lines · Darren Hart
Quoted 7 lines · jfabernathy
at the end of the build of core-image-sato-sdk I got the following error. I'm using the edison branch with the latest changes and also building the meta-cedartrail. I had previously built core-image-sato successfully with this setup.
Any ideas?
Quoted 7 lines
ERROR: Function 'build_boot_bin' failed (see /build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 for further information)
ERROR: Logfile of failure stored in:
/build/cdv-edison/tmp/work/cedartrail-poky-linux/core-image-sato-sdk-1.0-r0/temp/log.do_bootimg.25810 Log data follows:
| mkdosfs: seek failed
Quoted 4 lines
Interesting.
Can you provide the "OE Build Configuration" blob that prints at the start of the build - I'm mostly interested in your commit IDs for.
OE Build Configuration:
BB_VERSION        = "1.13.3"
TARGET_ARCH       = "i586"
TARGET_OS         = "linux"
MACHINE           = "cedartrail"
DISTRO            = "poky"
DISTRO_VERSION    = "1.1.1"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
meta
meta-yocto        = "edison:0fbd6a161576b2cafa8583adde0ffb15347c884a"
meta-cedartrail   = "edison:072c6e99616c25c31521e05560433c67fb2a0292"
meta-jfa          = "<unknown>:<unknown>"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks

Quoted 5 lines

Quoted 1 line
Also, please include the HEAD of your poky edison tree.
Not sure what git command you want, but here is the git show:
jim@ubuntu-x64:~/poky$ git show edison
commit 0fbd6a161576b2cafa8583adde0ffb15347c884a

Thanks Jim and Joshua,

It appears there is still something lacking in the edison bootimg.bbclass. I'll investigate. Please watch bug 2138 for updates.

--
Darren
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel