Pull request: u-boot-imx

Hi Albert,

please pull from u-boot-imx. Note: I rebased on u-boot mainline, because I needed some patches for testing that were merged by Wolfgang, and I could not find in u-boot-arm. Let me know if this is a problem for you ;-)

The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257:

Merge branch 'marek.vasut at gmail.com' of
git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)

are available in the git repository at:

git://www.denx.de/git/u-boot-imx.git master

Anatolij Gustschin (1):
ARM1136: add cache flush and invalidate operations

Eric Nelson (3):
i.MX6: define CACHELINE_SIZE
i.MX6: implement enable_caches()
i.MX6: mx6qsabrelite: add cache commands if cache is enabled

Fabio Estevam (4):
mx28: Split the README into a common part and a m28 specific part
mx28evk: Add a README file
mx6qsabrelite: Add boot switch setting information into the README
mx6qsabrelite: Fix the serial console port

Marek Vasut (4):
i.MX28: Fix initial stack pointer position i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
DMA: Split the APBH DMA init into block and channel init
M28: Pull out CONFIG_APBH_DMA so it's always enabled

Stefano Babic (7):
ARM: 926ejs: use debug() for misaligned addresses
mx35: flea3: fix when cache functions are linked
mx35: mx35pdk: fix when cache functions are linked
MX31: mx31pdk: drop enable_caches from board file
ARM: add u-boot.imx as target for i.MX SOCs
ARM1136: MX35: Make asm routines volatile in cache ops
MX35: mx35pdk: wrong board revision

Troy Kisky (1):
MX53: DDR: Fix ZQHWCTRL field TZQ_CS

Vikram Narayanan (4):
imx: Remove unneeded/repititive definitions from imx headers
imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
imx: Return gpio_set_value in gpio_direction_output

 arch/arm/cpu/arm1136/cpu.c                 |  103 ++++++++++++-
 arch/arm/cpu/arm926ejs/cache.c             |    2 +-
 arch/arm/cpu/arm926ejs/mx28/mx28.c         |    6 +
 arch/arm/cpu/armv7/config.mk               |    3 +
 arch/arm/cpu/armv7/mx6/soc.c               |    8 +
 arch/arm/include/asm/arch-mx28/dma.h       |    4 +-
 arch/arm/include/asm/arch-mx35/mx35_pins.h |    2 -
 arch/arm/include/asm/arch-mx5/mx5x_pins.h  |    2 -
 arch/arm/include/asm/arch-mx6/imx-regs.h   |    4 +-
 board/freescale/mx31pdk/mx31pdk.c          |    8 -
 board/freescale/mx35pdk/mx35pdk.c          |   11 --
 board/freescale/mx53ard/imximage_dd3.cfg   |    2 +-
 board/freescale/mx53evk/imximage.cfg       |    2 +-
 board/freescale/mx53loco/imximage.cfg      |    2 +-
 board/freescale/mx53smd/imximage.cfg       |    2 +-
 doc/README.m28                             |  219
+--------------------------
 doc/README.mx28_common                     |  226
++++++++++++++++++++++++++++
 doc/README.mx28evk                         |   29 ++++
 doc/README.mx6qsabrelite                   |    3 +-
 drivers/dma/apbh_dma.c                     |   38 ++---
 drivers/gpio/mxc_gpio.c                    |   12 +-
 drivers/mmc/mxsmmc.c                       |   53 +++++++-
 drivers/mtd/nand/mxs_nand.c                |   11 +-
 include/configs/flea3.h                    |    2 +
 include/configs/m28evk.h                   |    8 +-
 include/configs/mx28evk.h                  |    2 +-
 include/configs/mx35pdk.h                  |    3 +-
 include/configs/mx6qarm2.h                 |    2 +
 include/configs/mx6qsabrelite.h            |    8 +-
 29 files changed, 492 insertions(+), 285 deletions(-)
 create mode 100644 doc/README.mx28_common
 create mode 100644 doc/README.mx28evk

Stefano

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Hi Stefano,

Le 11/04/2012 16:22, Stefano Babic a ?crit :

Applied to u-boot-arm/master, thanks!

Amicalement,

Albert.