Patch Broken driver cx23885 mygica x8507
Hi all
I found that this is the patch that makes no sound and deformation image on mygica x8507:
I will try to find that lines are responsible.
Please refer to the patch mentioned above.
lines that leave without sound to the card are these:
@@ -1086,6 +1232,23 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
cx25840_write4(client, 0x8d0, 0x1f063870);
}+ if (is_cx2388x(state)) {
+ /* HVR1850 */ + /* AUD_IO_CTRL - I2S Input, Parallel1*/ + /* - Channel 1 src - Parallel1 (Merlin out) */ + /* - Channel 2 src - Parallel2 (Merlin out) */ + /* - Channel 3 src - Parallel3 (Merlin AC97 out) */ + /* - I2S source and dir - Merlin, output */ + cx25840_write4(client, 0x124, 0x100);
+
->+ if (!is_dif) {
->+ /* Stop microcontroller if we don't need it
->+ * to avoid audio popping on svideo/compositeuse.
->+ */
->+ cx25840_and_or(client, 0x803, ~0x10, 0x00);
->+ }
+ }
+
return 0;
}
Without these lines, have sound.
And the following line produces a vertical green bar on the right and the image is a bit narrow (maybe taken as an image of 702 pixel). If I cancel that line, the image is colored with alternating bars and color distorted.
@@ -631,6 +654,37 @@ static void cx23885_initialize(struct i2c_client *client)
/* Disable and clear audio interrupts - we don't use them */
cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff);
cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff);
+
+ /* CC raw enable */
+ /* - VIP 1.1 control codes - 10bit, blue field enable.
+ * - enable raw data during vertical blanking.
+ * - enable ancillary Data insertion for 656 or VIP.+ */
->+ cx25840_write4(client, 0x404, 0x0010253e);
With kernel 3.0, 3.1 and 3.2 the card worked fine.
Thanks,
Alfredo
Signature · 7 lines
Dona tu voz http://www.voxforge.org/es -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html