Skip to contentSkip to conversation

EXYNOS: display 32bpp bitmap TIZEN logo

PATCH Superseded Donghwa Lee 1 participant 1 message Apr 30, 2012

Subsystems (2)
Framebuffer layer Arm Samsung Exynos

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Donghwa Lee

author
#0 lore raw

PATCH 3/3 EXYNOS: display 32bpp bitmap TIZEN logo

This patches support drawing 32bpp bitmap TIZEN logo in exynos fb. trats_logo.h data is compressed from trats_logo.bmp to trats_logo.bmp.gz by gzip and converted to trats_logo.h header file format by some application. And then it is decomressed at the exynos fb driver by gunzip_bmp().

Signed-off-by Donghwa Lee <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>

---
Changes for v1:
- set CONFIG_SYS_VIDEO_LOGO_MAX_SIZE bigger than BMP header file size.
- drawing logo when boot_logo_on variable sets in board file.
- move trats_logo* header file to another patch.
- set RGB order depending on file format in board file.
- and so on.

Changes for v2:
- move fb_rgb_mode_t variable to include/lcd.h
- some bug fixes.
- define CONFIG_TIZEN
- use bmp_display() common display function

 board/samsung/trats/trats.c |    2 ++
 drivers/video/exynos_fb.c   |   36 ++++++++++++++++++++++++++++++++++++
 drivers/video/exynos_fb.h   |    7 -------
 drivers/video/exynos_fimd.c |    2 +-
 include/configs/trats.h     |    6 +++++-
 include/lcd.h               |    9 +++++++++
 6 files changed, 53 insertions(+), 9 deletions(-)
board/samsung/trats/trats.c +2 -0
index 084b67a..6ae15b7 100644
@@ -489,6 +489,8 @@ vidinfo_t panel_info = {
 	.reset_delay	= 0,
 	.interface_mode = FIMD_RGB_INTERFACE,
 	.mipi_enabled	= 1,
+	.logo_on	= 1,
+	.rgb_mode	= MODE_BGR_P,
 };
 
 void init_panel_info(vidinfo_t *vid)
drivers/video/exynos_fb.c +36 -0
index 96a8ec1..009533e 100644
@@ -32,6 +32,9 @@
 
 #include "exynos_fb.h"
 
+#ifdef CONFIG_TIZEN
+#include <libtizen.h>
+#endif
 int lcd_line_length;
 int lcd_color_fg;
 int lcd_color_bg;

@@ -64,6 +67,31 @@ static void exynos_lcd_init(vidinfo_t *vid)
 	exynos_fimd_lcd_init(vid);
 }
 
+#ifdef CONFIG_TIZEN
+static void draw_tizen_logo(void)
+{
+	int x, y;
+	bmp_image_t *bmp;
+	ulong addr, len;
+	unsigned int logo_width, logo_height;
+
+	logo_width = panel_info.logo_width;
+	logo_height = panel_info.logo_height;
+	x = ((panel_width - get_tizen_logo_width()) >> 1);
+	y = ((panel_height - get_tizen_logo_height()) >> 1) - 4;
+
+	addr = (ulong)get_tizen_logo_data();
+	bmp = (bmp_image_t *)addr;
+
+	if (!((bmp->header.signature[0]=='B') &&
+		      (bmp->header.signature[1]=='M'))) {
+			addr = (ulong)gunzip_bmp(addr, &len);
+	}
+
+	bmp_display((ulong)addr,  x, y);
+}
+#endif
+
 static void lcd_panel_on(vidinfo_t *vid)
 {
 	udelay(vid->init_delay);

@@ -115,6 +143,14 @@ void lcd_ctrl_init(void *lcdbase)
 
 void lcd_enable(void)
 {
+	if (panel_info.logo_on) {
+		memset(lcd_base, 0, panel_width * panel_height *
+				(NBITS(panel_info.vl_bpix) >> 3));
+#ifdef CONFIG_TIZEN
+		draw_tizen_logo();
+#endif
+	}
+
 	lcd_panel_on(&panel_info);
 }
drivers/video/exynos_fb.h +0 -7
index 66f5da6..4ff2efd 100644
@@ -27,13 +27,6 @@
 
 #define MAX_CLOCK	(86 * 1000000)
 
-enum exynos_fb_rgb_mode_t {
-	MODE_RGB_P = 0,
-	MODE_BGR_P = 1,
-	MODE_RGB_S = 2,
-	MODE_BGR_S = 3,
-};
-
 enum exynos_cpu_auto_cmd_rate {
 	DISABLE_AUTO_FRM,
 	PER_TWO_FRM,
drivers/video/exynos_fimd.c +1 -1
index 6416b90..f07568a 100644
@@ -273,7 +273,7 @@ void exynos_fimd_lcd_init(vidinfo_t *vid)
 	/* store panel info to global variable */
 	pvid = vid;
 
-	rgb_mode = MODE_RGB_P;
+	rgb_mode = vid->rgb_mode;
 
 	if (vid->interface_mode == FIMD_RGB_INTERFACE) {
 		cfg |= EXYNOS_VIDCON0_VIDOUT_RGB;
include/configs/trats.h +5 -1
index 5f913ca..2f96a18 100644
@@ -34,6 +34,7 @@
 #define CONFIG_S5P		/* which is in a S5P Family */
 #define CONFIG_EXYNOS4210	/* which is in a EXYNOS4210 */
 #define CONFIG_TRATS		/* working with TRATS */
+#define CONFIG_TIZEN		/* TIZEN lib */
 
 #include <asm/arch/cpu.h>	/* get chip and board defs */
 

@@ -216,9 +217,12 @@
 /* LCD */
 #define CONFIG_EXYNOS_FB
 #define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_32BPP
 #define CONFIG_FB_ADDR		0x52504000
 #define CONFIG_S6E8AX0
 #define CONFIG_EXYNOS_MIPI_DSIM
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(1280 * 720 * 4)
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12))
 
 #endif	/* __CONFIG_H */
include/lcd.h +9 -0
index 3d9ef16..075ebad 100644
@@ -190,6 +190,13 @@ enum {
 	FIMD_CPU_INTERFACE = 2,
 };
 
+enum exynos_fb_rgb_mode_t {
+	MODE_RGB_P = 0,
+	MODE_BGR_P = 1,
+	MODE_RGB_S = 2,
+	MODE_BGR_S = 3,
+};
+
 typedef struct vidinfo {
 	ushort vl_col;		/* Number of columns (i.e. 640) */
 	ushort vl_row;		/* Number of rows (i.e. 480) */

@@ -235,6 +242,8 @@ typedef struct vidinfo {
 	unsigned int wr_setup;
 	unsigned int wr_act;
 	unsigned int wr_hold;
+	unsigned int logo_on;
+	unsigned int rgb_mode;
 
 	/* parent clock name(MPLL, EPLL or VPLL) */
 	unsigned int pclk_name;
Signature · 1 line
1.7.4.1