Skip to contentSkip to conversation

mini2440 MTD partitions uncorrectable error

DISCUSSION Andrei Ehrlich 1 participant 1 message May 21, 2012 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hello,

I have the following problem:
with buildroot-2011.11 I have generated file system, kernel (3.1.4) and u-boot. The board starts and everything works fine except for one small flaw that bothers me. When starting the kernel providesthe following output:

...
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns s3c24xx-nand s3c2440-nand: NAND soft ECC
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit) Creating 4 MTD partitions on "nand":
0x000000000000-0x000000040000 : "u-boot"
*uncorrectable error : *
0x000000040000-0x000000060000 : "u-boot-env"
*ftl_cs: FTL header not found.*
0x000000060000-0x000000560000 : "kernel"
*ftl_cs: FTL header not found.*
0x000000560000-0x000040000000 : "root"
*ftl_cs: FTL header not found.*
dm9000 Ethernet Driver, V1.31
...

Has anyone an idea how I can remove the bold warnings? These warnings seem to be generated by the file linux-3.1.4/drivers/mtd/ftl.c (line 180).
Unfortunately I have no idea how I can fix this problem and hope for your expert help.