Skip to contentSkip to conversation

Error when building libdbi-sqlite-perl

DISCUSSION Patrick 1 participant 2 messages May 22, 2012

lore
Share & tools
lore

Patrick

author
#0 lore raw

Dear all,

I am using Yocto/Poky to build my own ARM based embedded system. In this system we use Perl and SQLite and DBI is used to interface Perl to SQLite. I was using poky 6.0.1 and everything was building nicely.

Now I have moved my own layer to poky 7.0 and I have a strange error when building libdbi-sqlite-perl:

Quoted 5 lines

NOTE: Running task 500 of 721 (ID: 6, poky-denzil-7.0/meta-s/recipes-devtools/libdbi-sqlite-perl/libdbi-sqlite-perl_1.36.bb, do_configure)
NOTE: package libdbi-sqlite-perl-1.36-r1: task do_configure: Started
ERROR: Function failed: do_configure (see build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922 for further information)
ERROR: Logfile of failure stored in: build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922 Log data follows:

Quoted 8 lines
| ERROR: Function failed: do_configure (see build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922 for further information)
| *** Module name IN: build-sb-dev-7.0/tmp/sysroots/sb/usr/lib/perl/5.14.2/Cwd.pm
| *** p1: build-sb-dev-7.0/tmp/sysroots/sb/usr/lib/  p3: perl/5.14.2/  p5: Cwd.pm
| *** Module name OUT: build-sb-dev-7.0/tmp/sysroots/i686-linux/usr/lib/perl-native/perl/5.14.2/Cwd.pm
| build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/run.do_configure.27922: line 85: 27924 Broken pipe             yes ''
|      27925 Segmentation fault      | perl Makefile.PL

NOTE: package libdbi-sqlite-perl-1.36-r1: task do_configure: Failed
ERROR: Task 6 (poky-denzil-7.0/meta-s/recipes-devtools/libdbi-sqlite-perl/libdbi-sqlite-perl_1.36.bb, do_configure) failed with exit code '1'

The recipes is from OE and is attached to this mail.

Any help/idea is welcome !

Patrick

author
#1 lore raw
Quoted 43 lines · Patrick

Dear all,

I am using Yocto/Poky to build my own ARM based embedded system. In this system we use Perl and SQLite and DBI is used to interface Perl to SQLite. I was using poky 6.0.1 and everything was building nicely.

Now I have moved my own layer to poky 7.0 and I have a strange error when building libdbi-sqlite-perl:

Quoted 21 lines

NOTE: Running task 500 of 721 (ID: 6, poky-denzil-7.0/meta-s/recipes-devtools/libdbi-sqlite-perl/libdbi-sqlite-perl_1.36.bb, do_configure)
NOTE: package libdbi-sqlite-perl-1.36-r1: task do_configure: Started
ERROR: Function failed: do_configure (see build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922 for further information)
ERROR: Logfile of failure stored in:
build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922

Log data follows:
| ERROR: Function failed: do_configure (see build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/log.do_configure.27922 for further information)
| *** Module name IN:
build-sb-dev-7.0/tmp/sysroots/sb/usr/lib/perl/5.14.2/Cwd.pm
| *** p1: build-sb-dev-7.0/tmp/sysroots/sb/usr/lib/ p3: perl/5.14.2/
p5: Cwd.pm
| *** Module name OUT:
build-sb-dev-7.0/tmp/sysroots/i686-linux/usr/lib/perl-native/perl/5.14.2/Cwd.pm

Quoted 8 lines

| build-sb-dev-7.0/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libdbi-sqlite-perl-1.36-r1/temp/run.do_configure.27922:
line 85: 27924 Broken pipe yes ''
| 27925 Segmentation fault | perl Makefile.PL
NOTE: package libdbi-sqlite-perl-1.36-r1: task do_configure: Failed
ERROR: Task 6 (poky-denzil-7.0/meta-s/recipes-devtools/libdbi-sqlite-perl/libdbi-sqlite-perl_1.36.bb, do_configure) failed with exit code '1'

The recipes is from OE and is attached to this mail.

Any help/idea is welcome !

Quoted 7 lines

Patrick

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

I reply myself If I use Perl 5.12.3 from Poky 6.0.1 in Poky 7.0 it work nicely. I will try to contact the author of libdbi-sqlite-perl...

Patrick