linux-v3.5-rc1: start of a user mode linux produces a core file
Whenever I start an UML image, I get a core file (nevertheless the UML starts up fine).
The gdb back trace is :
Core was generated by `/usr/local/bin/linux-v3.5-rc1 earlyprintk ubda=/home/tfoerste/virtual/uml/gento'.
Program terminated with signal 11, Segmentation fault.
#0 0x0808e1c4 in sigsuspend (set=0x21b16f48) at kernel/signal.c:3258
3258 current->saved_sigmask = current->blocked;
(gdb) bt
#0 0x0808e1c4 in sigsuspend (set=0x21b16f48) at kernel/signal.c:3258 #1 0x08063a30 in winch_thread (arg=0x219c3c58) at arch/um/drivers/chan_user.c:210
#2 0xb77303ee in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:133
v3.4 works fine, output of
$> /usr/local/bin/linux-v3.5-rc1 --showconfig > uml.config is attached.
Signature · 3 lines
MfG/Sincerely Toralf Förster pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
#
# Automatically generated file; DO NOT EDIT.
# User Mode Linux/i386 3.4.0 Kernel Configuration
#CONFIG_DEFCONFIG_LIST="arch/$ARCH/defconfig"CONFIG_UML=yCONFIG_MMU=yCONFIG_NO_IOMEM=y
# CONFIG_TRACE_IRQFLAGS_SUPPORT is not setCONFIG_LOCKDEP_SUPPORT=y
# CONFIG_STACKTRACE_SUPPORT is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_BUG=yCONFIG_HZ=100
#
# UML-specific options
#
#
# Host processor type and features
#
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not setCONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=5CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_TRANSMETA_32=yCONFIG_UML_X86=y
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not setCONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_3_LEVEL_PGTABLES is not setCONFIG_ARCH_HAS_SC_SIGNALS=yCONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_STATIC_LINK is not setCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=yCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_COMPACTION=yCONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_CROSS_MEMORY_ATTACH=yCONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not setCONFIG_LD_SCRIPT_DYN=yCONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_HOSTFS=y
# CONFIG_HPPFS is not setCONFIG_MCONSOLE=yCONFIG_MAGIC_SYSRQ=yCONFIG_KERNEL_STACK_ORDER=0
# CONFIG_MMAPPER is not setCONFIG_NO_DMA=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=128CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=16CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not setCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not setCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EXPERT is not setCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
# CONFIG_EMBEDDED is not set
#
# Kernel Performance Events And Counters
#CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_PROFILING is not set
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# UML Character Devices
#CONFIG_STDERR_CONSOLE=yCONFIG_STDIO_CONSOLE=yCONFIG_SSL=yCONFIG_NULL_CHAN=yCONFIG_PORT_CHAN=yCONFIG_PTY_CHAN=yCONFIG_TTY_CHAN=yCONFIG_XTERM_CHAN=y
# CONFIG_NOCONFIG_CHAN is not setCONFIG_CON_ZERO_CHAN="fd:0,fd:1"CONFIG_CON_CHAN="xterm"CONFIG_SSL_CHAN="pts"CONFIG_UML_SOUND=yCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_HOSTAUDIO=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_GENERIC_CPU_DEVICES=y
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_UBD=y
# CONFIG_BLK_DEV_UBD_SYNC is not setCONFIG_BLK_DEV_COW_COMMON=y
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline #
#
# Altera FPGA firmware download module
#
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not setCONFIG_NETDEVICES=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_MII is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not setCONFIG_TUN=y
# CONFIG_VETH is not set
#
# CAIF transport drivers
#
# CONFIG_ETHERNET is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not set
#
# Character devices
#CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not setCONFIG_DEVKMEM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_UML_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options. #
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
# CONFIG_REGULATOR is not set CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
#
# Hardware Spinlock drivers
#CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not setCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not setCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not setCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_NETPRIO_CGROUP is not setCONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# UML Network Devices
#CONFIG_UML_NET=yCONFIG_UML_NET_ETHERTAP=yCONFIG_UML_NET_TUNTAP=yCONFIG_UML_NET_SLIP=yCONFIG_UML_NET_DAEMON=y
# CONFIG_UML_NET_VDE is not setCONFIG_UML_NET_MCAST=y
# CONFIG_UML_NET_PCAP is not setCONFIG_UML_NET_SLIRP=y
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not setCONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not setCONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V2=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=yCONFIG_NFS_V4_1=yCONFIG_PNFS_FILE_LAYOUT=y CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not setCONFIG_CIFS=yCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=y
#
# Security options
#CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not setCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not setCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not setCONFIG_AUDIT_GENERIC=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not setCONFIG_DQL=yCONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not setCONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not setCONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not setCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not setCONFIG_SPARSE_RCU_POINTER=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not setCONFIG_TEST_LIST_SORT=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not setCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_GPROF is not set
# CONFIG_GCOV is not setCONFIG_EARLY_PRINTK=y
Quoted 6 lines · Toralf Förster
Whenever I start an UML image, I get a core file (nevertheless the UML starts up fine).
The gdb back trace is :
Quoted 10 lines
Core was generated by `/usr/local/bin/linux-v3.5-rc1 earlyprintk ubda=/home/tfoerste/virtual/uml/gento'.
Program terminated with signal 11, Segmentation fault.
#0 0x0808e1c4 in sigsuspend (set=0x21b16f48) atkernel/signal.c:32583258 current->saved_sigmask =current->blocked; (gdb) bt
#0 0x0808e1c4 in sigsuspend (set=0x21b16f48) atkernel/signal.c:3258#1 0x08063a30 inwinch_thread(arg=0x219c3c58) atarch/um/drivers/chan_user.c:210
#2 0xb77303ee in clone () at../sysdeps/unix/sysv/linux/i386/clone.S:133
Al and I currently working on -rc1.
There are TTY and signal issues.
Stay tuned.
Signature · 2 lines
Thanks, //richard
Quoted 5 lines · richard -rw- weinberger
Al and I currently working on -rc1.
There are TTY and signal issues.Stay tuned.
Yep - there's something wired. The current git version cannot be started in background, meaning that something like
$>./linux ... con=pts con0=fd:0,fd:1 con1=pts con12=pts ... &
creates 3 processes called "linux" - and the output doesn't continue after :
...
NET: Registered protocol family 17
Key type dns_resolver registered
initlevel:7=late, 21 registered initcalls
Initialized stdio console driver
Signature · 3 lines
MfG/Sincerely Toralf Förster pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3