Skip to contentSkip to conversation

Anybody know about nforce4 SATA II hot swapping + linux raid?

DISCUSSION Robert Hancock 2 participants 3 messages Oct 8, 2005 – Oct 18, 2005 5 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 3 lines · Molle Bestefich

IDE hotswap has never worked (OOTB at least) in Linux, and based on my experience it never will. Seems the IDE folks doesn't care a bit about it. (No offence meant. Just keeping it real.)

If you mean IDE as in PATA, it's not supported in the kernel because PATA hardware does not generally support hotswap, the controllers and drives are not designed for it.

SATA is very different in regards to hardware capabilities and kernel support for hotswap..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw
Quoted 5 lines · Lajber Zoltan

We have about 7 serverraid card from 4L to 5i. All of them is sitting on shelf. They are pain to manage, ipssend tool is weak, serverdirector complicated. And they are slow, the Fusion MPT SCSI with sw raid significant faster, as we measured with bonnie++. Even the old aic7892 is faster (these built-in scsi controllers on xseries motherboards).

The 6i and 7 series of cards seem to have quite a bit better relative speeds. Certainly the 4Lx cards can be outperformed in simple "hdparm" tests by a 3ware SATA controller/disks of half the price..

Plus, software RAID can't provide good performance on many server/DB applications without risking data loss in certain cases - for such things one really wants something with a battery-backed cache on it..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
#7 lore raw
Quoted 9 lines · Robert Hancock
Quoted 5 lines · Lajber Zoltan

We have about 7 serverraid card from 4L to 5i. All of them is sitting on shelf. They are pain to manage, ipssend tool is weak, serverdirector complicated. And they are slow, the Fusion MPT SCSI with sw raid significant faster, as we measured with bonnie++. Even the old aic7892 is faster (these built-in scsi controllers on xseries motherboards).

Quoted 4 lines

The 6i and 7 series of cards seem to have quite a bit better relative speeds. Certainly the 4Lx cards can be outperformed in simple "hdparm" tests by a 3ware SATA controller/disks of half the price..

Plus, software RAID can't provide good performance on many server/DB applications without risking data loss in certain cases - for such things one really wants something with a battery-backed cache on it..

I just have a better feeling about hardware when there are dozens of multi-TB servers from NY to CA. If it goes down IBM fixes it instead of someone trying to get it back up at the console.

Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me