Skip to contentSkip to conversation

lots of "bridge window ... (disabled)" messages

DISCUSSION Luck, Tony 2 participants 2 messages Mar 29, 2010

lore
Share & tools
lore

Luck, Tony

author
#0 lore raw

Hi Bjorn,

I just booted Linus latest git tree on my Tukwila system. I'm seeing a lot of bridge windows marked as disabled. Here's the start of a diff of dmesg output comparing a kernel from last week to today's kernel (git 01e7770 vs. b72c409):

< pci 0000:00:01.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
---

Quoted 1 line

pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

222,224c222,224

< pci 0000:00:03.0:   bridge window [io  f000 - 0000] reg reading
< pci 0000:00:03.0:   bridge window [mem 0xfff00000 - 0x000fffff] reg reading
< pci 0000:00:03.0:   bridge window [mem 0xfff00000 - 000fffff pref] reg reading

---

Quoted 3 lines
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

233c233
< pci 0000:00:05.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
---

Quoted 1 line

pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

... many more such diffs.

This is the same system that you helped out with a couple of months ago that had some issues in _CRS tables with ranges marked as "consumer". The BIOS team fixed the one range that was needed to allow access to my EHCI - but they didn't touch anything else.

Are these new checks related to the same sort of issues in _CRS? Or is this some other stuff? I don't appear to have lost access to any devices in today's kernel.

-Tony

#1 lore raw
Quoted 10 lines · Tony

Hi Bjorn,

I just booted Linus latest git tree on my Tukwila system. I'm seeing a lot of bridge windows marked as disabled. Here's the start of a diff of dmesg output comparing a kernel from last week to today's kernel (git 01e7770 vs. b72c409):

< pci 0000:00:01.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
---

Quoted 1 line

pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

Nothing changed here except the message. The bridge windows are disabled in both cases (same values in base & limit, with base > limit); I just changed the message from "reg reading" to "(disabled)" because I thought that would be easier to interpret.

Bjorn