Skip to contentSkip to conversation

: intel8x0m module causes "codec semaphore" errors when alsa is started

ALSA - driver 0001280 [email protected] 1 participant 1 message Jul 25, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1280>
======================================================================

Reported By:                fjpop
Assigned To:                sashak
======================================================================
Project:                    ALSA - driver
Issue ID:                   1280
Category:                   PCI - intel8x0m
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     assigned
Distribution:               Debian (unstable)
Kernel Version:             2.6.12
======================================================================
Date Submitted:             07-24-2005 17:52 CEST
Last Modified:              07-25-2005 21:01 CEST

======================================================================
Summary: intel8x0m module causes "codec semaphore" errors
when alsa is started
Description:
On my Toshiba Satellite A40, the intel8x0m module somehow conflicts with running alsa-utils.
The kern.log shows repeated errors on boot and shutdown (when /etc/init.d/alsa start/stop is run):
kernel: codec_semaphore: semaphore is not ready [0x1][0x701300]
kernel: codec_write 1: semaphore is not ready for register 0x54

If I do not load the intel8x0m module, the errors disappear. The same problem occurrs with earlier kernels.

======================================================================

----------------------------------------------------------------------
sashak - 07-24-05 19:52
----------------------------------------------------------------------
Should be fixed in CVS. Could you check?

----------------------------------------------------------------------
fjpop - 07-25-05 21:01
----------------------------------------------------------------------
Hi,
Thanks for the quick response.

I grabbed the following files from CVS:
intel8x0.c (1.204)
intel8x0m.c (1.33)

Was that what you intended?

I had to rip out all the .vendor => .subvendor and .device => .subdevice changes out of intel8x0.c, but after that it compiled fine with my Debian 2.6.12 kernel.

After booting the kernel I noticed this message in the boot log when /etc/init.d/alsa was started:
Setting up ALSA.../etc/init.d/alsa: Warning: 'alsactl restore' failed with error message 'alsactl: set_control:873: failed to obtain info for control
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1 (No such file or directory)'. done.
However, on '/etc/init.d/alsa restart' that message was gone. I guess just due to a change in the driver?

The original error message about codec_semaphore was gone. Nice :-) I played a few sound files without problems.
I have not tried to use the modem device.

Hope this helps.

Issue History
Date Modified Username Field Change
======================================================================

07-24-05 17:52 fjpop          New Issue                                    
07-24-05 17:52 fjpop          Distribution              => Debian (unstable)
07-24-05 17:52 fjpop          Kernel Version            => 2.6.12          
07-24-05 19:52 sashak         Note Added: 0005559                          
07-25-05 21:01 fjpop          Note Added: 0005565                          

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click