DMA timeouts & errors when using Sandisk CF for root.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · Ben Greear
I have a small VIA based system with a 512MB CF disk for the 'hard drive'. It seems to work OK, but I am getting some DMA timeouts and errors upon boot.
kernel is 2.6.11. I saw the same problem with FC2's 2.6.5 default kernel.
Quoted 8 lines
From dmesg:
hda: max request size: 128KiB
hda: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63, DMA
hda: cache flushes not supported
hda:<4>hda:dma_timer_expiry: dma status ==0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
What kind of CF-IDE adapter are you using? This looks like a CF card which supports DMA in an adapter which doesn't hook up the DMA lines properly, therefore the DMA times out when the kernel tries to use it. You can use a "nodma" option on the kernel command line to disable DMA, I think..
I've seen some newer adapters that have jumper settings for "DMA" or "non-DMA" on them..
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/