mvsas: fixed wrong destination when hiting NAK for command frame

PATCH New [email protected] 1 participant 1 message Sep 28, 2011 SCSI

lore

Share & tools

lore

[email protected]

author

2011-09-28 16:34 UTC #0 lore raw

PATCH 4/8 mvsas: fixed wrong destination when hiting NAK for command frame

From: Xiangliang Yu <[email protected]>

-- disable non data frame retry

Signed-off-by Xiangliang Yu <[email protected]>

---
 drivers/scsi/mvsas/mv_94xx.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

drivers/scsi/mvsas/mv_94xx.c +11 -0

index 8f32c7c..ca2b9d9 100644
@@ -398,6 +398,17 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi)
 	/* init phys */
 	mvs_phy_hacks(mvi);
 
+	/* disable non data frame retry */
+	tmp = mvs_cr32(mvi, CMD_SAS_CTL1);
+	if((revision == VANIR_A0_REV) ||
+		(revision == VANIR_B0_REV) ||
+		(revision == VANIR_C0_REV))
+	{
+		tmp &= ~0xffff;
+		tmp |= 0x007f;
+		mvs_cw32(mvi, CMD_SAS_CTL1, tmp);
+	}
+
 	/* set LED blink when IO*/
 	mw32(MVS_PA_VSR_ADDR, VSR_PHY_ACT_LED);
 	tmp = mr32(MVS_PA_VSR_PORT);

Signature · 1 line

1.7.4.4