Skip to contentSkip to conversation

Compex WLE600VX firmware crash

DISCUSSION svp 4 participants 10 messages Aug 4, 2017 – Aug 7, 2017 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

svp

author
#0 lore raw

Hi!

Have a firware crash at system start.

uname -a
Linux I5-4670 4.12.4-1-ARCH #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 x86_64 GNU/Linux

journalctl -r
авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-b авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0 авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000

авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware register dump:
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-b авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0 авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000 авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware crashed! (uuid b57b425a-1a8d-4d14-847d-41f611473cdf)

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Quoted 63 lines · svp

Hi!

Have a firware crash at system start.

uname -a
Linux I5-4670 4.12.4-1-ARCH #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 x86_64 GNU/Linux

journalctl -r
авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-b авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
авг 04 14:01:48 I5-4670 kernel: ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000

авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware register dump:
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-b авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
авг 04 14:01:49 I5-4670 kernel: ath10k_pci 0000:06:00.0: firmware crashed! (uuid b57b425a-1a8d-4d14-847d-41f611473cdf)

Quoted 6 lines

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#2 lore raw
Quoted 9 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#3 lore raw
Quoted 8 lines · svp
Quoted 7 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

Quoted 8 lines
Quoted 2 lines

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

I'd be curious how my firmware works on this system if you want to try it...send me the crash if it does crash:

The 988X version should work with this NIC.

http://www.candelatech.com/ath10k-10.1.php

Thanks,
Ben

Quoted 67 lines
[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

Signature · 7 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#4 lore raw
In reply to svp

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 77 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started
Quoted 7 lines

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#5 lore raw

Hi,

If you can point to some older version working and newer version not.. oh wait, hm, let me see if they changed the calibration data format between those two firmware revisions. Sigh.

-adrian

Quoted 5 lines · Richard Toy

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

Quoted 89 lines

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 84 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#6 lore raw

Hi Adrian,

Sorry, I'm not sure I understand the reason for the sarcasm.

In my original bug report post that I made in July I was totally ignored.

In that post I note that with firmware-5.bin_10.2.4.70.59-2 boot is ok and router works but upgrading to latest released firmware-5.bin_10.2.4.70.63-2 causes crash at boot.

What I noticed from Sergey's post was that the firmware register dumps were identical between his crash at startup and my crash at startup on different hardware platforms and thought this might prove useful to somebody with more knowledge.

If there is some useful test that I could perform to help the community further then please just ask.

Kindest regards,
Richard

Quoted 8 lines · Adrian Chadd

Hi,

If you can point to some older version working and newer version not.. oh wait, hm, let me see if they changed the calibration data format between those two firmware revisions. Sigh.

Quoted 98 lines

-adrian

Quoted 94 lines · Richard Toy

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 84 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#7 lore raw

oh I didn't mean for anything to come across as sarcastic. Well, maybe to QCA, but not users. :-)

At least we have two version strings to get a diff against. I unfortunately don't have full history of anything so I can't check for myself. I'll go see if I can find anyone who can fill in what the diffs are between those two 10.2 firmware releases to see if there's some obvious smoking bullet.

The one thing I do remember changing recently-ish is a calibration data layout change that's small and subtle and causes issues. I don't know if it falls within the above window though.

So please do keep testing and providing more info!

-adrian

Quoted 15 lines · Richard Toy

Hi Adrian,

Sorry, I'm not sure I understand the reason for the sarcasm.

In my original bug report post that I made in July I was totally ignored.

In that post I note that with firmware-5.bin_10.2.4.70.59-2 boot is ok and router works but upgrading to latest released firmware-5.bin_10.2.4.70.63-2 causes crash at boot.

What I noticed from Sergey's post was that the firmware register dumps were identical between his crash at startup and my crash at startup on different hardware platforms and thought this might prove useful to somebody with more knowledge.

Quoted 113 lines

If there is some useful test that I could perform to help the community further then please just ask.

Kindest regards,
Richard

Quoted 106 lines · Adrian Chadd

Hi,

If you can point to some older version working and newer version not.. oh wait, hm, let me see if they changed the calibration data format between those two firmware revisions. Sigh.

-adrian

Quoted 94 lines · Richard Toy

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 84 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#8 lore raw

I have just noticed that firmware-5.bin_10.2.4.70.61-2 exists and that also appears to work so the delta of interest is between releases firmware-5.bin_10.2.4.70.61-2 and firmware-5.bin_10.2.4.70.63-2.

    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.2, r3435-65eec8bd5f)
    \________\/    -----------------------------------------------------------
root@OpenWrt:~# dmesg | grep ath
[   10.755618] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[   10.977711] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   10.988596] ath10k_pci 0000:01:00.0: Falling back to user helper
[   11.121748] firmware ath10k!pre-cal-pci-0000:01:00.0.bin:
firmware_loading_store: map pages failed
[   11.643858] ath10k_pci 0000:01:00.0: qca988x hw2.0 target
0x4100016c chip_id 0x043202ff sub 0000:0000
[   11.653215] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[   11.666355] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.61-2
api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 af2517b8
[   11.678553] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   11.689152] ath10k_pci 0000:01:00.0: Falling back to user helper
[   11.783440] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[   11.805158] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A
crc32 bebc7c08
[   13.080494] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2
cal file max-sta 128 raw 0 hwcrypto 1
[   13.484387] ath: EEPROM regdomain: 0x0
[   13.484402] ath: EEPROM indicates default country code should be used
[   13.484410] ath: doing EEPROM country->regdmn map search
[   13.484426] ath: country maps to regdmn code: 0x3a
[   13.484435] ath: Country alpha2 being used: US
[   13.484442] ath: Regpair used: 0x3a
[   13.769649] ath: EEPROM regdomain: 0x0
[   13.769666] ath: EEPROM indicates default country code should be used
[   13.769674] ath: doing EEPROM country->regdmn map search
[   13.769691] ath: country maps to regdmn code: 0x3a
[   13.769700] ath: Country alpha2 being used: US
[   13.769707] ath: Regpair used: 0x3a
[   20.483064] ath: EEPROM regdomain: 0x8210
[   20.487175] ath: EEPROM indicates we should expect a country code
[   20.493353] ath: doing EEPROM country->regdmn map search
[   20.498755] ath: country maps to regdmn code: 0x37
[   20.503623] ath: Country alpha2 being used: NL
[   20.508126] ath: Regpair used: 0x37
[   20.511666] ath: regdomain 0x8210 dynamically updated by user
[   20.517580] ath: EEPROM regdomain: 0x8210
[   20.521642] ath: EEPROM indicates we should expect a country code
[   20.527830] ath: doing EEPROM country->regdmn map search
[   20.533216] ath: country maps to regdmn code: 0x37
[   20.538083] ath: Country alpha2 being used: NL
[   20.542587] ath: Regpair used: 0x37
[   20.546136] ath: regdomain 0x8210 dynamically updated by user

Richard

Quoted 13 lines · Adrian Chadd

oh I didn't mean for anything to come across as sarcastic. Well, maybe to QCA, but not users. :-)

At least we have two version strings to get a diff against. I unfortunately don't have full history of anything so I can't check for myself. I'll go see if I can find anyone who can fill in what the diffs are between those two 10.2 firmware releases to see if there's some obvious smoking bullet.

The one thing I do remember changing recently-ish is a calibration data layout change that's small and subtle and causes issues. I don't know if it falls within the above window though.

Quoted 135 lines

So please do keep testing and providing more info!

-adrian

Quoted 128 lines · Richard Toy

Hi Adrian,

Sorry, I'm not sure I understand the reason for the sarcasm.

In my original bug report post that I made in July I was totally ignored.

In that post I note that with firmware-5.bin_10.2.4.70.59-2 boot is ok and router works but upgrading to latest released firmware-5.bin_10.2.4.70.63-2 causes crash at boot.

What I noticed from Sergey's post was that the firmware register dumps were identical between his crash at startup and my crash at startup on different hardware platforms and thought this might prove useful to somebody with more knowledge.

If there is some useful test that I could perform to help the community further then please just ask.

Kindest regards,
Richard

Quoted 106 lines · Adrian Chadd

Hi,

If you can point to some older version working and newer version not.. oh wait, hm, let me see if they changed the calibration data format between those two firmware revisions. Sigh.

-adrian

Quoted 94 lines · Richard Toy

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 84 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#9 lore raw

Woo good catch!

Ok, I'll go ask.

-adrian

Quoted 63 lines · Richard Toy

I have just noticed that firmware-5.bin_10.2.4.70.61-2 exists and that also appears to work so the delta of interest is between releases firmware-5.bin_10.2.4.70.61-2 and firmware-5.bin_10.2.4.70.63-2.

    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.2, r3435-65eec8bd5f)
    \________\/    -----------------------------------------------------------
root@OpenWrt:~# dmesg | grep ath
[   10.755618] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[   10.977711] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   10.988596] ath10k_pci 0000:01:00.0: Falling back to user helper
[   11.121748] firmware ath10k!pre-cal-pci-0000:01:00.0.bin:
firmware_loading_store: map pages failed
[   11.643858] ath10k_pci 0000:01:00.0: qca988x hw2.0 target
0x4100016c chip_id 0x043202ff sub 0000:0000
[   11.653215] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[   11.666355] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.61-2
api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 af2517b8
[   11.678553] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   11.689152] ath10k_pci 0000:01:00.0: Falling back to user helper
[   11.783440] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[   11.805158] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A
crc32 bebc7c08
[   13.080494] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2
cal file max-sta 128 raw 0 hwcrypto 1
[   13.484387] ath: EEPROM regdomain: 0x0
[   13.484402] ath: EEPROM indicates default country code should be used
[   13.484410] ath: doing EEPROM country->regdmn map search
[   13.484426] ath: country maps to regdmn code: 0x3a
[   13.484435] ath: Country alpha2 being used: US
[   13.484442] ath: Regpair used: 0x3a
[   13.769649] ath: EEPROM regdomain: 0x0
[   13.769666] ath: EEPROM indicates default country code should be used
[   13.769674] ath: doing EEPROM country->regdmn map search
[   13.769691] ath: country maps to regdmn code: 0x3a
[   13.769700] ath: Country alpha2 being used: US
[   13.769707] ath: Regpair used: 0x3a
[   20.483064] ath: EEPROM regdomain: 0x8210
[   20.487175] ath: EEPROM indicates we should expect a country code
[   20.493353] ath: doing EEPROM country->regdmn map search
[   20.498755] ath: country maps to regdmn code: 0x37
[   20.503623] ath: Country alpha2 being used: NL
[   20.508126] ath: Regpair used: 0x37
[   20.511666] ath: regdomain 0x8210 dynamically updated by user
[   20.517580] ath: EEPROM regdomain: 0x8210
[   20.521642] ath: EEPROM indicates we should expect a country code
[   20.527830] ath: doing EEPROM country->regdmn map search
[   20.533216] ath: country maps to regdmn code: 0x37
[   20.538083] ath: Country alpha2 being used: NL
[   20.542587] ath: Regpair used: 0x37
[   20.546136] ath: regdomain 0x8210 dynamically updated by user
Quoted 151 lines

Richard

Quoted 148 lines · Adrian Chadd

oh I didn't mean for anything to come across as sarcastic. Well, maybe to QCA, but not users. :-)

At least we have two version strings to get a diff against. I unfortunately don't have full history of anything so I can't check for myself. I'll go see if I can find anyone who can fill in what the diffs are between those two 10.2 firmware releases to see if there's some obvious smoking bullet.

The one thing I do remember changing recently-ish is a calibration data layout change that's small and subtle and causes issues. I don't know if it falls within the above window though.

So please do keep testing and providing more info!

-adrian

Quoted 128 lines · Richard Toy

Hi Adrian,

Sorry, I'm not sure I understand the reason for the sarcasm.

In my original bug report post that I made in July I was totally ignored.

In that post I note that with firmware-5.bin_10.2.4.70.59-2 boot is ok and router works but upgrading to latest released firmware-5.bin_10.2.4.70.63-2 causes crash at boot.

What I noticed from Sergey's post was that the firmware register dumps were identical between his crash at startup and my crash at startup on different hardware platforms and thought this might prove useful to somebody with more knowledge.

If there is some useful test that I could perform to help the community further then please just ask.

Kindest regards,
Richard

Quoted 106 lines · Adrian Chadd

Hi,

If you can point to some older version working and newer version not.. oh wait, hm, let me see if they changed the calibration data format between those two firmware revisions. Sigh.

-adrian

Quoted 94 lines · Richard Toy

As I already said to Sergey, that dump looks identical to the one I posted last month for exactly the same version of firmware running on a TP AC1750. I never found a solution but the previous version (54?) works fine.

http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html

Richard

Quoted 84 lines · svp
Quoted 10 lines · Adrian Chadd

Hi,

Is this being used as a STA? AP? What's it associating to? what channel, mode, etc

-adrian

Hi!
The device was not initialized. Driver failed to set up network interface. If then I try to start driver as modprobe ath10k_pci - result is the same - firware crash.
More accurate dmesg log here:

[    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.688848] random: crng init done
[    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.719901] fbcon: inteldrmfb (fb0) is primary device
[    2.763642] Console: switching to colour frame buffer device 240x75
[    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.120930] nct6775: Enabling hardware monitor logical device mappings.
[    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
[    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
[    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
[    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
[    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
[    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
[    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
[    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
[    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
[    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
[    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
[    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
[    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
[    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
[    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
[    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
[    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
[    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
[    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
[    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
[    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
[    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
[    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
[    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
[    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
[    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
[    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
[    5.501878] r8168: enp3s0: link up
[    7.630654] usb 3-13: device descriptor read/64, error -110
[    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
[    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
[    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started

Sergey

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k