Sandy Bridge Desktop - 1920x1080i interlace not working
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
thank you,
alfonso
Quoted 10,600 lines · Angela Schmid
Hello****
** **
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.** **
Nvidia noveau with GTX275 (using yellow
DVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.****** **
xorg.conf is empty and use the following command:****
** **
xrandr --newmode "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync****
xrandr --addmode HDMI3 "1920x1080i"****
xrandr --output HDMI3 --mode "1920x1080i"****
** **
The desktop is half and moved to the left. The television is flickering.** **
I tried several other modelines, which work for the noveau driver, but not for the intel driver.****
The highest resolution possible is "1280x720@50hz" 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync****** **
When using only HDMI grub2 will start in 1080i but xorg is not visible afterwards. ****
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr –output VGA1 –off****
** **
Is interlace working with the intel driver ? Any help appreciated.****
Will there be soon support (otherwise I have to buy a NV adapter) ?****
** **
Cheers****
Angela****
** **
System environment:
-- chipset: Sandy Bridge (2600k)
-- system architecture: 64-bit
-- xf86-video-intel: ppa/xorg-edgers: xserver-xorg-video-intel 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric****-- xserver: 1.11.2.902 (1.11.3 RC2)(10 December 2011...) -- mesa: 3.0 Mesa 8.0-devel****
libegl1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libegl1-mesa-drivers/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-dri/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-glx/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglapi-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglu1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libopenvg1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
mesa-utils/oneiric uptodate 8.0.1+git20110129+d8f7d6b-0ubuntu2 -- libdrm:****
libdrm-intel1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-nouveau1a/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-radeon1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm2/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric -- kernel: 3.0.0-14-generic
-- Linux distribution: Ubuntu
-- Machine or mobo model: Asus P8Z68-V PRO -- Display connector: HDMIReproducing steps:
Additional info:****
Intel****
Xrandr****
dmesg****
Xorg.0.log****
Noveau****
Xrandr****
Xorg.0.log****
** **
** **
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192****
VGA1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x41**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: ****HDMI1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x42**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x43**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off auto on ****HDMI2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x44**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
HDMI3 connected 1920x1080+0+0 (
0xb8) normal (normal left inverted right x axis y axis) 640mm x 360mm****Identifier: 0x45**** Timestamp: 102654**** Subpixel: unknown**** Gamma: 1.0:1.0:1.0**** Brightness: 1.0**** Clones: **** CRTC: 0**** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** EDID:**** 00ffffffffffff00410c000001010101**** 00000103804024780ae692a3544a9926**** 0f4a4c21080001010101010101010101**** 010101010101011d80d0721c1620102c**** 258080682100009e011d8018711c1620**** 582c250080682100009e000000fc0050**** 68696c697073204654560a20000000fd**** 00303e0f3209000a20202020202001e3**** 020324f04b0103040506071213141516**** 29091f07150750190786830100006503**** 0c002000011d00bc52d01e20b8285540**** 80682100001e011d007251d01e206e28**** 550080682100001e8c0ad09020403120**** 0c4055008068210000188c0ad08a20e0**** 2d10103e960080682100001800000000**** 0000000000000000000000000000002a**** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
1024x768 (
0x48) 65.0MHz -HSync -VSync****h: width 1024 start 1048 end 1184 total 1344 skew 0 clock48.4KHz****
v: height 768 start 771 end 777 total 806 clock
60.0Hz****800x600 (
0x49) 40.0MHz +HSync +VSync****h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz****v: height 600 start 601 end 605 total 628 clock
60.3Hz****640x480 (
0x4a) 25.2MHz -HSync -VSync****h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz****v: height 480 start 490 end 492 total 525 clock
60.0Hz****194144_1920x1080ix0.0 (
0xb8) 74.2MHz +HSync +VSync Interlace *current*
***h: width 1920 start 2448 end 2492 total 2640 skew 0 clock28.1KHz****
v: height 1080 start 1084 end 1094 total 1125 clock25.0Hz****
DP2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x46**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP3 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x47**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
** **
** **
[ 0.000000] Initializing cgroup subsys cpuset****[ 0.000000] Initializing cgroup subsys cpu****[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gccversion 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)****
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] KERNEL supported cpus:****[ 0.000000] Intel GenuineIntel****[ 0.000000] AMD AuthenticAMD****[ 0.000000] Centaur CentaurHauls****[ 0.000000] BIOS-provided physical RAM map:****[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)****
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)****
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)****
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)****
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)****
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000be5cc000 (usable)****
[ 0.000000] BIOS-e820: 00000000be5cc000 - 00000000be628000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000be628000 - 00000000beb36000 (reserved)****
[ 0.000000] BIOS-e820: 00000000beb36000 - 00000000beb39000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beb39000 - 00000000bed9f000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bed9f000 - 00000000bedb0000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedb0000 - 00000000bedc7000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedc7000 - 00000000bedc9000 (usable)****
[ 0.000000] BIOS-e820: 00000000bedc9000 - 00000000bedca000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedca000 - 00000000bedd2000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedd2000 - 00000000beddc000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beddc000 - 00000000bee38000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bee38000 - 00000000bee7b000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bee7b000 - 00000000bf000000 (usable)****
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved)****
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)****
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)****
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)****
[ 0.000000] NX (Execute Disable) protection: active****[ 0.000000] DMI 2.6 present.****[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO,BIOS 1101 11/23/2011****
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000(usable) ==> (reserved)****
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000(usable)****
[ 0.000000] No AGP bridge found****[ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000****[ 0.000000] MTRR default type: uncachable****[ 0.000000] MTRR fixed ranges enabled:****[ 0.000000] 00000-9FFFF write-back****[ 0.000000] A0000-BFFFF uncachable****[ 0.000000] C0000-D3FFF write-protect****[ 0.000000] D4000-E7FFF uncachable****[ 0.000000] E8000-FFFFF write-protect****[ 0.000000] MTRR variable ranges enabled:****[ 0.000000] 0 base 000000000 mask E00000000 write-back****[ 0.000000] 1 base 200000000 mask FC0000000 write-back****[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable****[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable****[ 0.000000] 4 base 22FE00000 mask FFFE00000 uncachable****[ 0.000000] 5 base 230000000 mask FF0000000 uncachable****[ 0.000000] 6 disabled****[ 0.000000] 7 disabled****[ 0.000000] 8 disabled****[ 0.000000] 9 disabled****[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new0x7010600070106****
[ 0.000000] original variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB****[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 3GB, range: 1GB, type UC****[ 0.000000] reg 4, base: 8958MB, range: 2MB, type UC****[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC****[ 0.000000] total RAM covered: 7926M****[ 0.000000] Found optimal setting for mtrr clean up****[ 0.000000] gran_size: 64K chunk_size: 16M
num_reg: 7 lose cover RAM: 0G****[ 0.000000] New variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB****[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB****[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB****[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB****[ 0.000000] reg 6, base: 8958MB, range: 2MB, type UC****[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000(usable) ==> (reserved)****
[ 0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000****[ 0.000000] found SMP MP-table at [ffff8800000fcf10] fcf10****[ 0.000000] initial memory mapped : 0 - 20000000****[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size20480****
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf000000****[ 0.000000] 0000000000 - 00bf000000 page 2M****[ 0.000000] kernel direct mapping tables up to bf000000 @1fffc000-20000000****
[ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000****[ 0.000000] 0100000000 - 022fe00000 page 2M****[ 0.000000] kernel direct mapping tables up to 22fe00000 @beff6000-bf000000****
[ 0.000000] RAMDISK: 358ee000 - 36c6f000****[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)****[ 0.000000] ACPI: XSDT 00000000be61d068 0004C (v01 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: FACP 00000000be627250 000F4 (v04 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: DSDT 00000000be61d140 0A10B (v02 ALASKA A M I00000000 INTL 20051117)****
[ 0.000000] ACPI: FACS 00000000bedd3f80 00040****[ 0.000000] ACPI: APIC 00000000be627348 00092 (v03 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: SSDT 00000000be6273e0 001D6 (v01 AMICPU PROC00000001 MSFT 03000001)****
[ 0.000000] ACPI: MCFG 00000000be6275b8 0003C (v01 ALASKA A M I01072009 MSFT 00000097)****
[ 0.000000] ACPI: HPET 00000000be6275f8 00038 (v01 ALASKA A M I01072009 AMI. 00000004)****
[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] No NUMA configuration found****[ 0.000000] Faking a node at 0000000000000000-000000022fe00000****[ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000****[ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff]****[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->[ffff880227800000-ffff88022e5fffff] on node 0****
[ 0.000000] Zone PFN ranges:****[ 0.000000] DMA 0x00000010 -> 0x00001000****[ 0.000000] DMA32 0x00001000 -> 0x00100000****[ 0.000000] Normal 0x00100000 -> 0x0022fe00****[ 0.000000] Movable zone start PFN for each node****[ 0.000000] early_node_map[7] active PFN ranges****[ 0.000000] 0: 0x00000010 -> 0x0000009b****[ 0.000000] 0: 0x00000100 -> 0x00020000****[ 0.000000] 0: 0x00020200 -> 0x00040000****[ 0.000000] 0: 0x00040200 -> 0x000be5cc****[ 0.000000] 0: 0x000bedc7 -> 0x000bedc9****[ 0.000000] 0: 0x000bee7b -> 0x000bf000****[ 0.000000] 0: 0x00100000 -> 0x0022fe00****[ 0.000000] On node 0 totalpages: 2023646****[ 0.000000] DMA zone: 56 pages used for memmap****[ 0.000000] DMA zone: 5 pages reserved****[ 0.000000] DMA zone: 3918 pages, LIFO batch:0****[ 0.000000] DMA32 zone: 14280 pages used for memmap****[ 0.000000] DMA32 zone: 760715 pages, LIFO batch:31****[ 0.000000] Normal zone: 17017 pages used for memmap****[ 0.000000] Normal zone: 1227655 pages, LIFO batch:31****[ 0.000000] ACPI: PM-Timer IO Port: 0x408****[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)****[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])****[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])****[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI0-23****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)****
[ 0.000000] ACPI: IRQ0 used by override.****[ 0.000000] ACPI: IRQ2 used by override.****[ 0.000000] ACPI: IRQ9 used by override.****[ 0.000000] Using ACPI (MADT) for SMP configuration information****[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000****[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs****[ 0.000000] nr_irqs_gsi: 40****[ 0.000000] PM: Registered nosave memory: 000000000009b000 -000000000009c000****
[ 0.000000] PM: Registered nosave memory: 000000000009c000 -00000000000a0000****
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -00000000000e0000****
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -0000000000100000****
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -0000000020200000****
[ 0.000000] PM: Registered nosave memory: 0000000040000000 -0000000040200000****
[ 0.000000] PM: Registered nosave memory: 00000000be5cc000 -00000000be628000****
[ 0.000000] PM: Registered nosave memory: 00000000be628000 -00000000beb36000****
[ 0.000000] PM: Registered nosave memory: 00000000beb36000 -00000000beb39000****
[ 0.000000] PM: Registered nosave memory: 00000000beb39000 -00000000bed9f000****
[ 0.000000] PM: Registered nosave memory: 00000000bed9f000 -00000000bedb0000****
[ 0.000000] PM: Registered nosave memory: 00000000bedb0000 -00000000bedc7000****
[ 0.000000] PM: Registered nosave memory: 00000000bedc9000 -00000000bedca000****
[ 0.000000] PM: Registered nosave memory: 00000000bedca000 -00000000bedd2000****
[ 0.000000] PM: Registered nosave memory: 00000000bedd2000 -00000000beddc000****
[ 0.000000] PM: Registered nosave memory: 00000000beddc000 -00000000bee38000****
[ 0.000000] PM: Registered nosave memory: 00000000bee38000 -00000000bee7b000****
[ 0.000000] PM: Registered nosave memory: 00000000bf000000 -00000000bf800000****
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 -00000000cfa00000****
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 -00000000fed1c000****
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -00000000fed20000****
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -00000000ff000000****
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -0000000100000000****
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap:cfa00000:2f31c000)****
[ 0.000000] Booting paravirtualized kernel on bare hardware****[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8nr_node_ids:1****
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79616r8192 d22784 u262144****
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152****[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 ****[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 1992288****
[ 0.000000] Policy zone: Normal****[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)****[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340****[ 0.000000] Checking aperture...****[ 0.000000] No AGP bridge found****[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area****[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -bailing!****
[ 0.000000] Memory: 7881468k/9172992k available (6109k kernel code,1078408k absent, 213116k reserved, 4876k data, 984k init)****
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,CPUs=8, Nodes=1****
[ 0.000000] Hierarchical RCU implementation.****[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.****
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16****[ 0.000000] Extended CMOS year: 2000****[ 0.000000] Console: colour dummy device 80x25****[ 0.000000] console [tty0] enabled****[ 0.000000] allocated 65011712 bytes of page_cgroup****[ 0.000000] please try 'cgroup_disable=memory' option if you don't wantmemory cgroups****
[ 0.000000] hpet clockevent registered****[ 0.000000] Fast TSC calibration using PIT****[ 0.004000] Detected 3410.641 MHz processor.****[ 0.000002] Calibrating delay loop (skipped), value calculated usingtimer frequency.. 6821.28 BogoMIPS (lpj=13642564)****
[ 0.000006] pid_max: default: 32768 minimum: 301****[ 0.000023] Security Framework initialized****[ 0.000032] AppArmor: AppArmor initialized****[ 0.000034] Yama: becoming mindful.****[ 0.000562] Dentry cache hash table entries: 1048576 (order: 11,8388608 bytes)****
[ 0.001795] Inode-cache hash table entries: 524288 (order: 10, 4194304bytes)****
[ 0.002278] Mount-cache hash table entries: 256****[ 0.002349] Initializing cgroup subsys cpuacct****[ 0.002353] Initializing cgroup subsys memory****[ 0.002358] Initializing cgroup subsys devices****[ 0.002360] Initializing cgroup subsys freezer****[ 0.002362] Initializing cgroup subsys net_cls****[ 0.002364] Initializing cgroup subsys blkio****[ 0.002369] Initializing cgroup subsys perf_event****[ 0.002387] CPU: Physical Processor ID: 0****[ 0.002389] CPU: Processor Core ID: 0****[ 0.002394] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'****[ 0.002394] ENERGY_PERF_BIAS: View and update withx86_energy_perf_policy(8)****
[ 0.002399] mce: CPU supports 9 MCE banks****[ 0.002409] CPU0: Thermal monitoring enabled (TM1)****[ 0.002417] using mwait in idle threads.****[ 0.004052] ACPI: Core revision 20110413****[ 0.219039] ftrace: allocating 25647 entries in 101 pages****[ 0.225855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1****[ 0.265509] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07****
[ 0.372139] Performance Events: PEBS fmt1+, SandyBridge events, IntelPMU driver.****
[ 0.372145] ... version: 3****[ 0.372146] ... bit width: 48****[ 0.372148] ... generic registers: 4****[ 0.372149] ... value mask: 0000ffffffffffff****[ 0.372151] ... max period: 000000007fffffff****[ 0.372153] ... fixed-purpose events: 3****[ 0.372154] ... event mask: 000000070000000f****[ 0.372410] Booting Node 0, Processors #1****[ 0.372412] smpboot cpu 1: start_ip = 96000****[ 0.480208] #2****[ 0.480211] smpboot cpu 2: start_ip = 96000****[ 0.588103] #3****[ 0.588106] smpboot cpu 3: start_ip = 96000****[ 0.696095] #4****[ 0.696098] smpboot cpu 4: start_ip = 96000****[ 0.803954] #5****[ 0.803957] smpboot cpu 5: start_ip = 96000****[ 0.911949] #6****[ 0.911951] smpboot cpu 6: start_ip = 96000****[ 1.019844] #7 Ok.****[ 1.019848] smpboot cpu 7: start_ip = 96000****[ 1.127692] Brought up 8 CPUs****[ 1.127696] Total of 8 processors activated (54575.83 BogoMIPS).****[ 1.132439] devtmpfs: initialized****[ 1.132522] PM: Registering ACPI NVS region at be5cc000 (376832 bytes)****
[ 1.132528] PM: Registering ACPI NVS region at beb36000 (12288 bytes)****
[ 1.132531] PM: Registering ACPI NVS region at bed9f000 (69632 bytes)****
[ 1.132533] PM: Registering ACPI NVS region at bedc9000 (4096 bytes)****
[ 1.132535] PM: Registering ACPI NVS region at bedd2000 (40960 bytes)****
[ 1.132538] PM: Registering ACPI NVS region at bee38000 (274432 bytes)****
[ 1.133403] print_constraints: dummy: ****[ 1.133428] Time: 18:40:04 Date: 01/17/12****[ 1.133450] NET: Registered protocol family 16****[ 1.133513] Trying to unpack rootfs image as initramfs...****[ 1.133517] ACPI: bus type pci registered****[ 1.133553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.133557] PCI: not using MMCONFIG****[ 1.133558] PCI: Using configuration type 1 for base access****[ 1.133982] bio: create slab <bio-0> at 0****[ 1.134828] ACPI: EC: Look up EC in DSDT****[ 1.135589] ACPI: Executed 1 blocks of module-level executable AML code****
[ 1.137110] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND(20110413/psargs-359)****
[ 1.137116] ACPI Exception: AE_NOT_FOUND, Could not execute argumentsfor [RAMW] (Region) (20110413/nsinit-349)****
[ 1.137292] ACPI: SSDT 00000000bedd2818 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137570] ACPI: Dynamic OEM Table Load:****[ 1.137573] ACPI: SSDT (null) 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137601] ACPI: SSDT 00000000bedd9a18 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.137820] ACPI: Dynamic OEM Table Load:****[ 1.137822] ACPI: SSDT (null) 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.138317] ACPI: Interpreter enabled****[ 1.138320] ACPI: (supports S0 S1 S3 S4 S5)****[ 1.138333] ACPI: Using IOAPIC for interrupt routing****[ 1.138348] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.138384] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved inACPI motherboard resources****
[ 1.149715] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored****[ 1.152841] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =0x62****
[ 1.152951] ACPI: No dock devices found.****[ 1.152954] HEST: Table not found.****[ 1.152956] PCI: Using host bridge windows from ACPI; if necessary, use"pci=nocrs" and report a bug****
[ 1.153066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])****[ 1.153184] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]****
[ 1.153187] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]****
[ 1.153189] pci_root PNP0A08:00: host bridge window [mem0x000a0000-0x000bffff]****
[ 1.153192] pci_root PNP0A08:00: host bridge window [mem0x000c8000-0x000dffff]****
[ 1.153195] pci_root PNP0A08:00: host bridge window [mem0xcfa00000-0xffffffff]****
[ 1.153199] pci_root PNP0A08:00: address space collision: host bridgewindow [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]****
[ 1.153208] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600****[ 1.153232] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604****[ 1.153249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold****[ 1.153251] pci 0000:00:01.0: PME# disabled****[ 1.153265] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300****[ 1.153272] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]****
[ 1.153276] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bitpref]****
[ 1.153280] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]****[ 1.153320] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780****[ 1.153341] pci 0000:00:16.0: reg 10: [mem 0xfbd29000-0xfbd2900f 64bit]****
[ 1.153398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold****[ 1.153401] pci 0000:00:16.0: PME# disabled****[ 1.153428] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200****[ 1.153444] pci 0000:00:19.0: reg 10: [mem 0xfbd00000-0xfbd1ffff]****[ 1.153452] pci 0000:00:19.0: reg 14: [mem 0xfbd28000-0xfbd28fff]****[ 1.153460] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]****[ 1.153505] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold****[ 1.153508] pci 0000:00:19.0: PME# disabled****[ 1.153530] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03****[ 1.153549] pci 0000:00:1a.0: reg 10: [mem 0xfbd27000-0xfbd273ff]****[ 1.153617] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold****[ 1.153621] pci 0000:00:1a.0: PME# disabled****[ 1.153641] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403****[ 1.153655] pci 0000:00:1b.0: reg 10: [mem 0xfbd20000-0xfbd23fff 64bit]****
[ 1.153704] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold****[ 1.153707] pci 0000:00:1b.0: PME# disabled****[ 1.153726] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604****[ 1.153784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold****[ 1.153787] pci 0000:00:1c.0: PME# disabled****[ 1.153807] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604****[ 1.153865] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold****[ 1.153869] pci 0000:00:1c.1: PME# disabled****[ 1.153889] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604****[ 1.153946] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold****[ 1.153950] pci 0000:00:1c.2: PME# disabled****[ 1.153970] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604****[ 1.154027] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold****[ 1.154031] pci 0000:00:1c.3: PME# disabled****[ 1.154051] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604****[ 1.154108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold****[ 1.154111] pci 0000:00:1c.4: PME# disabled****[ 1.154132] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604****[ 1.154189] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold****[ 1.154193] pci 0000:00:1c.6: PME# disabled****[ 1.154213] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604****[ 1.154270] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold****[ 1.154274] pci 0000:00:1c.7: PME# disabled****[ 1.154298] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03****[ 1.154318] pci 0000:00:1d.0: reg 10: [mem 0xfbd26000-0xfbd263ff]****[ 1.154385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold****[ 1.154389] pci 0000:00:1d.0: PME# disabled****[ 1.154412] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601****[ 1.154519] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106****[ 1.154535] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]****[ 1.154542] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]****[ 1.154549] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]****[ 1.154556] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]****[ 1.154563] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]****[ 1.154570] pci 0000:00:1f.2: reg 24: [mem 0xfbd25000-0xfbd257ff]****[ 1.154600] pci 0000:00:1f.2: PME# supported from D3hot****[ 1.154603] pci 0000:00:1f.2: PME# disabled****[ 1.154618] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05****[ 1.154631] pci 0000:00:1f.3: reg 10: [mem 0xfbd24000-0xfbd240ff 64bit]****
[ 1.154651] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]****[ 1.154687] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.154690] pci 0000:00:01.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154693] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154695] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154736] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.154740] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154744] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154750] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154816] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.154844] pci 0000:03:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]****
[ 1.154964] pci 0000:03:00.0: PME# supported from D3hot D3cold****[ 1.154970] pci 0000:03:00.0: PME# disabled****[ 1.159621] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.159625] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159629] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.159635] pci 0000:00:1c.1: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159676] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.159680] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159684] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.159690] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159750] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101****[ 1.159783] pci 0000:05:00.0: reg 10: [io 0xe040-0xe047]****[ 1.159799] pci 0000:05:00.0: reg 14: [io 0xe030-0xe033]****[ 1.159815] pci 0000:05:00.0: reg 18: [io 0xe020-0xe027]****[ 1.159830] pci 0000:05:00.0: reg 1c: [io 0xe010-0xe013]****[ 1.159846] pci 0000:05:00.0: reg 20: [io 0xe000-0xe00f]****[ 1.159861] pci 0000:05:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]****[ 1.159877] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]****
[ 1.159914] pci 0000:05:00.0: PME# supported from D3hot****[ 1.159919] pci 0000:05:00.0: PME# disabled****[ 1.167614] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.167618] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.167622] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.167627] pci 0000:00:1c.3: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.167695] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.167723] pci 0000:06:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]****
[ 1.167844] pci 0000:06:00.0: PME# supported from D3hot D3cold****[ 1.167850] pci 0000:06:00.0: PME# disabled****[ 1.175609] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.175615] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000](disabled)****
[ 1.175619] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.175625] pci 0000:00:1c.4: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175682] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604****[ 1.175785] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractivedecode)****
[ 1.175790] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.175794] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.175799] pci 0000:00:1c.6: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175801] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.175802] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.175804] pci 0000:00:1c.6: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.175805] pci 0000:00:1c.6: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.175864] pci 0000:08:01.0: [10ec:8139] type 0 class 0x000200****[ 1.175895] pci 0000:08:01.0: reg 10: [io 0xd000-0xd0ff]****[ 1.175912] pci 0000:08:01.0: reg 14: [mem 0xfb901000-0xfb9010ff]****[ 1.176022] pci 0000:08:01.0: supports D1 D2****[ 1.176023] pci 0000:08:01.0: PME# supported from D1 D2 D3hot D3cold****
[ 1.176029] pci 0000:08:01.0: PME# disabled****[ 1.176058] pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00****[ 1.176089] pci 0000:08:02.0: reg 10: [mem 0xfb900000-0xfb9007ff]****[ 1.176106] pci 0000:08:02.0: reg 14: [io 0xd100-0xd17f]****[ 1.176218] pci 0000:08:02.0: supports D2****[ 1.176219] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold****[ 1.176225] pci 0000:08:02.0: PME# disabled****[ 1.176300] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractivedecode)****
[ 1.176311] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.176316] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.176326] pci 0000:07:00.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.176327] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff](subtractive decode)****
[ 1.176328] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff] (subtractive decode)****
[ 1.176330] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176331] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176333] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.176334] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.176336] pci 0000:07:00.0: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.176337] pci 0000:07:00.0: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.176408] pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106****[ 1.176425] pci 0000:09:00.0: reg 10: [io 0xc040-0xc047]****[ 1.176437] pci 0000:09:00.0: reg 14: [io 0xc030-0xc033]****[ 1.176450] pci 0000:09:00.0: reg 18: [io 0xc020-0xc027]****[ 1.176462] pci 0000:09:00.0: reg 1c: [io 0xc010-0xc013]****[ 1.176474] pci 0000:09:00.0: reg 20: [io 0xc000-0xc00f]****[ 1.176486] pci 0000:09:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]****[ 1.176499] pci 0000:09:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]****
[ 1.176533] pci 0000:09:00.0: PME# supported from D3hot****[ 1.176538] pci 0000:09:00.0: PME# disabled****[ 1.183602] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.183607] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.183611] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.183616] pci 0000:00:1c.7: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.183652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]****[ 1.183726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]****
[ 1.183744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]****
[ 1.183759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]****
[ 1.183774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]****
[ 1.183788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]****
[ 1.183814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]****
[ 1.183829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]****
[ 1.183845] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX6.BR24._PRT]****
[ 1.183873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]****
[ 1.183948] pci0000:00: Requesting ACPI _OSC control (0x1d)****[ 1.184064] pci0000:00: ACPI _OSC control (0x1c) granted****[ 1.186647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 1214 15)****
[ 1.186678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 1214 15)****
[ 1.186707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 1415)****
[ 1.186735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 1415)****
[ 1.186762] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 1415)****
[ 1.186789] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 1214 15)****
[ 1.186817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 1214 15)****
[ 1.186845] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 1214 15)****
[ 1.186901] vgaarb: device added:PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none****
[ 1.186908] vgaarb: loaded****[ 1.186909] vgaarb: bridge control possible 0000:00:02.0****[ 1.187004] SCSI subsystem initialized****[ 1.187042] libata version 3.00 loaded.****[ 1.187066] usbcore: registered new interface driver usbfs****[ 1.187073] usbcore: registered new interface driver hub****[ 1.187088] usbcore: registered new device driver usb****[ 1.187132] PCI: Using ACPI for IRQ routing****[ 1.188450] PCI: pci_cache_line_size set to 64 bytes****[ 1.188541] reserve RAM buffer: 000000000009b400 - 000000000009ffff ****
[ 1.188543] reserve RAM buffer: 00000000be5cc000 - 00000000bfffffff ****
[ 1.188545] reserve RAM buffer: 00000000bedc9000 - 00000000bfffffff ****
[ 1.188547] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff ****
[ 1.188548] reserve RAM buffer: 000000022fe00000 - 000000022fffffff ****
[ 1.188604] NetLabel: Initializing****[ 1.188606] NetLabel: domain hash size = 128****[ 1.188607] NetLabel: protocols = UNLABELED CIPSOv4****[ 1.188614] NetLabel: unlabeled traffic allowed by default****[ 1.188641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0****[ 1.188646] hpet0: 8 comparators, 64-bit 14.318180 MHz counter****[ 1.190658] Switching to clocksource hpet****[ 1.191590] Switched to NOHz mode on CPU #0****[ 1.191647] Switched to NOHz mode on CPU #4****[ 1.191650] Switched to NOHz mode on CPU #7****[ 1.191652] Switched to NOHz mode on CPU #2****[ 1.191679] Switched to NOHz mode on CPU #1****[ 1.191682] Switched to NOHz mode on CPU #6****[ 1.191714] Switched to NOHz mode on CPU #5****[ 1.191717] Switched to NOHz mode on CPU #3****[ 1.193951] AppArmor: AppArmor Filesystem Enabled****[ 1.193965] pnp: PnP ACPI init****[ 1.193973] ACPI: bus type pnp registered****[ 1.194061] pnp 00:00: [bus 00-ff]****[ 1.194063] pnp 00:00: [io 0x0cf8-0x0cff]****[ 1.194064] pnp 00:00: [io 0x0000-0x0cf7 window]****[ 1.194065] pnp 00:00: [io 0x0d00-0xffff window]****[ 1.194066] pnp 00:00: [mem 0x000a0000-0x000bffff window]****[ 1.194068] pnp 00:00: [mem 0x000c8000-0x000dffff window]****[ 1.194069] pnp 00:00: [mem 0xcfa00000-0xffffffff window]****[ 1.194070] pnp 00:00: [mem 0x00000000 window]****[ 1.194109] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03(active)****
[ 1.194141] pnp 00:01: [mem 0xfed10000-0xfed19fff]****[ 1.194142] pnp 00:01: [mem 0xe0000000-0xe3ffffff]****[ 1.194143] pnp 00:01: [mem 0xfed90000-0xfed93fff]****[ 1.194144] pnp 00:01: [mem 0xfed20000-0xfed3ffff]****[ 1.194145] pnp 00:01: [mem 0xfee00000-0xfee0ffff]****[ 1.194170] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved****
[ 1.194173] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved****
[ 1.194176] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved****
[ 1.194178] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved****
[ 1.194181] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved****
[ 1.194184] system 00:01: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194220] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194221] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194222] pnp 00:02: [io 0x0290-0x029f]****[ 1.194223] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194244] system 00:02: [io 0x0290-0x029f] has been reserved****[ 1.194247] system 00:02: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194254] pnp 00:03: [dma 4]****[ 1.194255] pnp 00:03: [io 0x0000-0x000f]****[ 1.194256] pnp 00:03: [io 0x0081-0x0083]****[ 1.194257] pnp 00:03: [io 0x0087]****[ 1.194258] pnp 00:03: [io 0x0089-0x008b]****[ 1.194259] pnp 00:03: [io 0x008f]****[ 1.194260] pnp 00:03: [io 0x00c0-0x00df]****[ 1.194273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)****
[ 1.194278] pnp 00:04: [io 0x0070-0x0071]****[ 1.194286] pnp 00:04: [irq 8]****[ 1.194298] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)****
[ 1.194302] pnp 00:05: [io 0x0061]****[ 1.194314] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)****
[ 1.194323] pnp 00:06: [io 0x0010-0x001f]****[ 1.194324] pnp 00:06: [io 0x0022-0x003f]****[ 1.194325] pnp 00:06: [io 0x0044-0x005f]****[ 1.194326] pnp 00:06: [io 0x0063]****[ 1.194327] pnp 00:06: [io 0x0065]****[ 1.194328] pnp 00:06: [io 0x0067-0x006f]****[ 1.194328] pnp 00:06: [io 0x0072-0x007f]****[ 1.194329] pnp 00:06: [io 0x0080]****[ 1.194331] pnp 00:06: [io 0x0084-0x0086]****[ 1.194332] pnp 00:06: [io 0x0088]****[ 1.194333] pnp 00:06: [io 0x008c-0x008e]****[ 1.194334] pnp 00:06: [io 0x0090-0x009f]****[ 1.194335] pnp 00:06: [io 0x00a2-0x00bf]****[ 1.194336] pnp 00:06: [io 0x00e0-0x00ef]****[ 1.194337] pnp 00:06: [io 0x04d0-0x04d1]****[ 1.194362] system 00:06: [io 0x04d0-0x04d1] has been reserved****[ 1.194365] system 00:06: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194369] pnp 00:07: [io 0x00f0-0x00ff]****[ 1.194373] pnp 00:07: [irq 13]****[ 1.194384] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)****
[ 1.194544] pnp 00:08: [io 0x0400-0x0453]****[ 1.194545] pnp 00:08: [io 0x0458-0x047f]****[ 1.194546] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194547] pnp 00:08: [io 0x0500-0x057f]****[ 1.194548] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]****[ 1.194549] pnp 00:08: [mem 0xfec00000-0xfecfffff]****[ 1.194550] pnp 00:08: [mem 0xfed08000-0xfed08fff]****[ 1.194552] pnp 00:08: [mem 0xff000000-0xffffffff]****[ 1.194575] system 00:08: [io 0x0400-0x0453] has been reserved****[ 1.194577] system 00:08: [io 0x0458-0x047f] has been reserved****[ 1.194580] system 00:08: [io 0x0500-0x057f] has been reserved****[ 1.194582] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved****
[ 1.194585] system 00:08: [mem 0xfec00000-0xfecfffff] could not bereserved****
[ 1.194587] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved****
[ 1.194590] system 00:08: [mem 0xff000000-0xffffffff] has been reserved****
[ 1.194593] system 00:08: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194612] pnp 00:09: [io 0x0454-0x0457]****[ 1.194633] system 00:09: [io 0x0454-0x0457] has been reserved****[ 1.194636] system 00:09: Plug and Play ACPI device, IDs INT3f0dPNP0c02 (active)****
[ 1.194707] pnp 00:0a: [mem 0xfed00000-0xfed003ff]****[ 1.194749] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)****
[ 1.194840] pnp: PnP ACPI: found 11 devices****[ 1.194842] ACPI: ACPI bus type pnp unregistered****[ 1.200033] PCI: max bus depth: 2 pci_try_num: 3****[ 1.200099] pci 0000:00:1c.3: BAR 15: assigned [mem0xcfa00000-0xcfafffff pref]****
[ 1.200102] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.200104] pci 0000:00:01.0: bridge window [io disabled]****[ 1.200107] pci 0000:00:01.0: bridge window [mem disabled]****[ 1.200110] pci 0000:00:01.0: bridge window [mem pref disabled]****[ 1.200113] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.200115] pci 0000:00:1c.0: bridge window [io disabled]****[ 1.200120] pci 0000:00:1c.0: bridge window [mem disabled]****[ 1.200124] pci 0000:00:1c.0: bridge window [mem pref disabled]****[ 1.200131] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.200133] pci 0000:00:1c.1: bridge window [io disabled]****[ 1.200138] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.200143] pci 0000:00:1c.1: bridge window [mem pref disabled]****[ 1.200149] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.200151] pci 0000:00:1c.2: bridge window [io disabled]****[ 1.200156] pci 0000:00:1c.2: bridge window [mem disabled]****[ 1.200160] pci 0000:00:1c.2: bridge window [mem pref disabled]****[ 1.200167] pci 0000:05:00.0: BAR 6: assigned [mem0xcfa00000-0xcfa0ffff pref]****
[ 1.200170] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.200173] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.200179] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.200184] pci 0000:00:1c.3: bridge window [mem0xcfa00000-0xcfafffff pref]****
[ 1.200190] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.200192] pci 0000:00:1c.4: bridge window [io disabled]****[ 1.200198] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.200202] pci 0000:00:1c.4: bridge window [mem pref disabled]****[ 1.200208] pci 0000:07:00.0: PCI bridge to [bus 08-08]****[ 1.200213] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.200221] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200227] pci 0000:07:00.0: bridge window [mem pref disabled]****[ 1.200238] pci 0000:00:1c.6: PCI bridge to [bus 07-08]****[ 1.200241] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.200246] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200251] pci 0000:00:1c.6: bridge window [mem pref disabled]****[ 1.200258] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.200261] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.200266] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.200271] pci 0000:00:1c.7: bridge window [mem pref disabled]****[ 1.200284] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16****
[ 1.200288] pci 0000:00:01.0: setting latency timer to 64****[ 1.200295] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200299] pci 0000:00:1c.0: setting latency timer to 64****[ 1.200305] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16****
[ 1.200309] pci 0000:00:1c.1: setting latency timer to 64****[ 1.200317] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200321] pci 0000:00:1c.2: setting latency timer to 64****[ 1.200329] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200333] pci 0000:00:1c.3: setting latency timer to 64****[ 1.200339] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200344] pci 0000:00:1c.4: setting latency timer to 64****[ 1.200349] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200354] pci 0000:00:1c.6: setting latency timer to 64****[ 1.200360] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18****
[ 1.200366] pci 0000:07:00.0: setting latency timer to 64****[ 1.200373] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200378] pci 0000:00:1c.7: setting latency timer to 64****[ 1.200381] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]****[ 1.200382] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]****[ 1.200383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200385] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200386] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]****[ 1.200388] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]****[ 1.200389] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]****[ 1.200390] pci_bus 0000:05: resource 2 [mem 0xcfa00000-0xcfafffff pref]****
[ 1.200392] pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]****[ 1.200393] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]****[ 1.200394] pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200395] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]****[ 1.200396] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]****[ 1.200398] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200399] pci_bus 0000:07: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200400] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]****[ 1.200401] pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200403] pci_bus 0000:08: resource 4 [io 0xd000-0xdfff]****[ 1.200404] pci_bus 0000:08: resource 5 [mem 0xfb900000-0xfb9fffff]****[ 1.200405] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]****[ 1.200406] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]****[ 1.200408] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]****
[ 1.200409] pci_bus 0000:08: resource 11 [mem 0xcfa00000-0xffffffff]****
[ 1.200410] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]****[ 1.200412] pci_bus 0000:09: resource 1 [mem 0xfb800000-0xfb8fffff]****[ 1.200429] NET: Registered protocol family 2****[ 1.200581] IP route cache hash table entries: 262144 (order: 9,2097152 bytes)****
[ 1.201217] TCP established hash table entries: 524288 (order: 11,8388608 bytes)****
[ 1.202168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)****
[ 1.202287] TCP: Hash tables configured (established 524288 bind 65536)****
[ 1.202290] TCP reno registered****[ 1.202300] UDP hash table entries: 4096 (order: 5, 131072 bytes)****[ 1.202327] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)****
[ 1.202401] NET: Registered protocol family 1****[ 1.202413] pci 0000:00:02.0: Boot video device****[ 1.458661] PCI: CLS 64 bytes, default 64****[ 1.458664] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)****
[ 1.458668] Placing 64MB software IO TLB between ffff8800ba5cc000 -ffff8800be5cc000****
[ 1.458670] software IO TLB at phys 0xba5cc000 - 0xbe5cc000****[ 1.459046] audit: initializing netlink socket (disabled)****[ 1.459053] type=2000 audit(1326825604.028:1): initialized****[ 1.479199] HugeTLB registered 2 MB page size, pre-allocated 0 pages****
[ 1.493833] VFS: Disk quotas dquot_6.5.2****[ 1.493867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)****
[ 1.494192] fuse init (API version 7.16)****[ 1.494238] msgmni has been set to 15393****[ 1.494464] Block layer SCSI generic (bsg) driver version 0.4 loaded(major 253)****
[ 1.494485] io scheduler noop registered****[ 1.494487] io scheduler deadline registered****[ 1.494508] io scheduler cfq registered (default)****[ 1.494590] pcieport 0000:00:01.0: setting latency timer to 64****[ 1.494609] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X****[ 1.494646] pcieport 0000:00:1c.0: setting latency timer to 64****[ 1.494683] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X****[ 1.494738] pcieport 0000:00:1c.1: setting latency timer to 64****[ 1.494774] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X****[ 1.494829] pcieport 0000:00:1c.2: setting latency timer to 64****[ 1.494866] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X****[ 1.494920] pcieport 0000:00:1c.3: setting latency timer to 64****[ 1.494957] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X****[ 1.495011] pcieport 0000:00:1c.4: setting latency timer to 64****[ 1.495047] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X****[ 1.495101] pcieport 0000:00:1c.7: setting latency timer to 64****[ 1.495138] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X****[ 1.495200] pcieport 0000:00:01.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495203] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded****
[ 1.495217] pcieport 0000:00:1c.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495222] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded****
[ 1.495235] pcieport 0000:00:1c.1: Signaling PME through PCIe PMEinterrupt****
[ 1.495238] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495242] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded****
[ 1.495255] pcieport 0000:00:1c.2: Signaling PME through PCIe PMEinterrupt****
[ 1.495260] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded****
[ 1.495272] pcieport 0000:00:1c.3: Signaling PME through PCIe PMEinterrupt****
[ 1.495274] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495279] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded****
[ 1.495292] pcieport 0000:00:1c.4: Signaling PME through PCIe PMEinterrupt****
[ 1.495295] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495299] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded****
[ 1.495312] pcieport 0000:00:1c.7: Signaling PME through PCIe PMEinterrupt****
[ 1.495314] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495319] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded****
[ 1.495327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5****[ 1.495341] pciehp: PCI Express Hot Plug Controller Driver version: 0.4****
[ 1.495365] intel_idle: MWAIT substates: 0x1120****[ 1.495366] intel_idle: v0.4 model 0x2A****[ 1.495366] intel_idle: lapic_timer_reliable_states 0xffffffff****[ 1.495437] input: Power Button as/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0****
[ 1.495443] ACPI: Power Button [PWRB]****[ 1.495465] input: Power Button as/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1****
[ 1.495468] ACPI: Power Button [PWRF]****[ 1.495484] ACPI: acpi_idle yielding to intel_idle****[ 1.507996] ERST: Table is not found!****[ 1.508038] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled****
[ 1.598963] Freeing initrd memory: 19972k freed****[ 1.734643] Linux agpgart interface v0.103****[ 1.734703] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset****[ 1.734811] agpgart-intel 0000:00:00.0: detected gtt size: 2097152Ktotal, 262144K mappable****
[ 1.736156] agpgart-intel 0000:00:00.0: detected 262144K stolen memory****
[ 1.736242] agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000****
[ 1.736783] brd: module loaded****[ 1.737031] loop: module loaded****[ 1.737249] Fixed MDIO Bus: probed****[ 1.737262] PPP generic driver version 2.4.2****[ 1.737279] tun: Universal TUN/TAP device driver, 1.6****[ 1.737281] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>****[ 1.737319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver****
[ 1.737339] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.737353] ehci_hcd 0000:00:1a.0: setting latency timer to 64****[ 1.737356] ehci_hcd 0000:00:1a.0: EHCI Host Controller****[ 1.737375] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned busnumber 1****
[ 1.737398] ehci_hcd 0000:00:1a.0: debug port 2****[ 1.741275] ehci_hcd 0000:00:1a.0: cache line size of 64 is notsupported****
[ 1.741288] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbd27000****[ 1.754372] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00****[ 1.754481] hub 1-0:1.0: USB hub found****[ 1.754485] hub 1-0:1.0: 2 ports detected****[ 1.754523] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.754533] ehci_hcd 0000:00:1d.0: setting latency timer to 64****[ 1.754536] ehci_hcd 0000:00:1d.0: EHCI Host Controller****[ 1.754556] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned busnumber 2****
[ 1.754576] ehci_hcd 0000:00:1d.0: debug port 2****[ 1.758444] ehci_hcd 0000:00:1d.0: cache line size of 64 is notsupported****
[ 1.758448] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbd26000****[ 1.770362] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00****[ 1.770463] hub 2-0:1.0: USB hub found****[ 1.770465] hub 2-0:1.0: 2 ports detected****[ 1.770496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver****[ 1.770503] uhci_hcd: USB Universal Host Controller Interface driver****
[ 1.770534] i8042: PNP: No PS/2 controller found. Probing portsdirectly.****
[ 1.773136] serio: i8042 KBD port at 0x60,0x64 irq 1****[ 1.773141] serio: i8042 AUX port at 0x60,0x64 irq 12****[ 1.773201] mousedev: PS/2 mouse device common for all mice****[ 1.773262] rtc_cmos 00:04: RTC can wake from S4****[ 1.773338] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0****[ 1.773363] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpetirqs****
[ 1.773417] device-mapper: uevent: version 1.0.3****[ 1.773454] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)initialised: [email protected]****
[ 1.773553] cpuidle: using governor ladder****[ 1.773713] cpuidle: using governor menu****[ 1.773715] EFI Variables Facility v0.08 2004-May-17****[ 1.773827] TCP cubic registered****[ 1.773889] NET: Registered protocol family 10****[ 1.774114] NET: Registered protocol family 17****[ 1.774125] Registering the dns_resolver key type****[ 1.774172] PM: Hibernation image not present or could not be loaded.****
[ 1.774178] registered taskstats version 1****[ 1.785213] Magic number: 12:288:696****[ 1.785322] rtc_cmos 00:04: setting system clock to 2012-01-17 18:40:05UTC (1326825605)****
[ 1.786168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found****[ 1.786170] EDD information not available.****[ 1.787102] Freeing unused kernel memory: 984k freed****[ 1.787177] Write protecting the kernel read-only data: 10240k****[ 1.787507] Freeing unused kernel memory: 16k freed****[ 1.790022] Freeing unused kernel memory: 1396k freed****[ 1.800124] udevd[100]: starting version 173****[ 1.808108] wmi: Mapper loaded****[ 1.813001] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2****[ 1.813007] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.****[ 1.813032] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) ->IRQ 18****
[ 1.813044] e1000e 0000:00:19.0: setting latency timer to 64****[ 1.813152] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 1.813724] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->IRQ 17****
[ 1.813749] xhci_hcd 0000:03:00.0: setting latency timer to 64****[ 1.813753] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.813799] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 3****
[ 1.814364] [drm] Initialized drm 1.1.0 20060810****[ 1.817441] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,2004)****
[ 1.817460] 8139cp 0000:08:01.0: This (id 10ec:8139 rev 10) is not an8139C+ compatible chip, use 8139too****
[ 1.817788] 8139too: 8139too Fast Ethernet driver 0.9.28****[ 1.817815] 8139too 0000:08:01.0: PCI INT A -> GSI 19 (level, low) ->IRQ 19****
[ 1.820169] 8139too 0000:08:01.0: eth0: RealTek RTL8139 at 0xd000,00:40:f4:51:8a:62, IRQ 19****
[ 1.820201] firewire_ohci 0000:08:02.0: PCI INT A -> GSI 17 (level,low) -> IRQ 17****
[ 1.874437] firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCIv1.10, 4 IR + 8 IT contexts, quirks 0x11****
[ 1.874902] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbc00000****[ 1.874991] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X****[ 1.875002] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X****[ 1.875004] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X****[ 1.875007] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X****[ 1.875010] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X****[ 1.875012] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X****[ 1.875015] xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X****[ 1.875018] xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X****[ 1.875158] xHCI xhci_add_endpoint called for root hub****[ 1.875159] xHCI xhci_check_bandwidth called for root hub****[ 1.875181] hub 3-0:1.0: USB hub found****[ 1.875188] hub 3-0:1.0: 2 ports detected****[ 1.875234] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.875255] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 4****
[ 1.875322] xHCI xhci_add_endpoint called for root hub****[ 1.875324] xHCI xhci_check_bandwidth called for root hub****[ 1.875342] hub 4-0:1.0: USB hub found****[ 1.875349] hub 4-0:1.0: 2 ports detected****[ 1.875384] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) ->IRQ 16****
[ 1.875409] xhci_hcd 0000:06:00.0: setting latency timer to 64****[ 1.875412] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.875431] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 5****
[ 1.936542] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfba00000****[ 1.936591] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X****[ 1.936594] xhci_hcd 0000:06:00.0: irq 57 for MSI/MSI-X****[ 1.936596] xhci_hcd 0000:06:00.0: irq 58 for MSI/MSI-X****[ 1.936599] xhci_hcd 0000:06:00.0: irq 59 for MSI/MSI-X****[ 1.936601] xhci_hcd 0000:06:00.0: irq 60 for MSI/MSI-X****[ 1.936604] xhci_hcd 0000:06:00.0: irq 61 for MSI/MSI-X****[ 1.936606] xhci_hcd 0000:06:00.0: irq 62 for MSI/MSI-X****[ 1.936609] xhci_hcd 0000:06:00.0: irq 63 for MSI/MSI-X****[ 1.936728] xHCI xhci_add_endpoint called for root hub****[ 1.936729] xHCI xhci_check_bandwidth called for root hub****[ 1.936748] hub 5-0:1.0: USB hub found****[ 1.936756] hub 5-0:1.0: 2 ports detected****[ 1.936787] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.936810] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 6****
[ 1.936861] xHCI xhci_add_endpoint called for root hub****[ 1.936862] xHCI xhci_check_bandwidth called for root hub****[ 1.936872] hub 6-0:1.0: USB hub found****[ 1.936879] hub 6-0:1.0: 2 ports detected****[ 2.066176] usb 1-1: new high speed USB device number 2 using ehci_hcd****
[ 2.107612] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1)14:da:e9:4f:94:94****
[ 2.107616] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 NetworkConnection****
[ 2.107661] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No:FFFFFF-0FF****
[ 2.107675] ahci 0000:00:1f.2: version 3.0****[ 2.107696] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ20****
[ 2.107770] ahci 0000:00:1f.2: irq 64 for MSI/MSI-X****[ 2.122208] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x22impl SATA mode****[ 2.122219] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pioslum part ems apst ****
[ 2.122228] ahci 0000:00:1f.2: setting latency timer to 64****[ 2.130530] scsi0 : ahci****[ 2.130697] scsi1 : ahci****[ 2.130823] scsi2 : ahci****[ 2.130962] scsi3 : ahci****[ 2.131092] scsi4 : ahci****[ 2.131220] scsi5 : ahci****[ 2.131317] ata1: DUMMY****[ 2.131320] ata2: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25180irq 64****[ 2.131322] ata3: DUMMY****[ 2.131323] ata4: DUMMY****[ 2.131324] ata5: DUMMY****[ 2.131327] ata6: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25380irq 64****[ 2.131351] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.131406] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ16****
[ 2.131414] i915 0000:00:02.0: setting latency timer to 64****[ 2.131534] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps
0x3impl SATA mode****[ 2.131538] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slumpart ****
[ 2.131545] ahci 0000:05:00.0: setting latency timer to 64****[ 2.131806] scsi6 : ahci****[ 2.131853] scsi7 : ahci****[ 2.131884] ata7: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10100irq 19****[ 2.131891] ata8: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10180irq 19****[ 2.131909] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.132032] ahci 0000:09:00.0: irq 65 for MSI/MSI-X****[ 2.132083] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps
0x3impl SATA mode****[ 2.132087] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbspio slum part sxs ****
[ 2.132093] ahci 0000:09:00.0: setting latency timer to 64****[ 2.132279] scsi8 : ahci****[ 2.132326] scsi9 : ahci****[ 2.132356] ata9: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810100irq 65****[ 2.132363] ata10: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810180irq 65****[ 2.178012] [drm:intel_opregion_setup], graphic opregion physical addr:0xbeb36018****
[ 2.178037] [drm:intel_opregion_setup], Public ACPI methods supported****
[ 2.178038] [drm:intel_opregion_setup], SWSCI supported****[ 2.178039] [drm:intel_opregion_setup], ASLE supported****[ 2.178057] i915 0000:00:02.0: irq 66 for MSI/MSI-X****[ 2.178060] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).****
[ 2.178063] [drm] Driver supports precise vblank timestamp query.****[ 2.178067] [drm:intel_detect_pch], Found CougarPoint PCH****[ 2.178069] [drm:intel_parse_bios], Using VBT from OpRegion: $VBTSNB/IVB-DESKTOPd****
[ 2.178070] [drm:parse_general_definitions], crt_ddc_bus_pin: 2****[ 2.178073] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBTtables:****
[ 2.178075] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 065000 1024 1048 1184 1344 768 771 777 806
0x80xa****[ 2.178080] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOSVBT tables:****
[ 2.178082] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200"0 162000 1600 1664 1856 2160 1200 1201 1204 1250
0x80xa****[ 2.178120] [drm:parse_sdvo_device_mapping], No SDVO device info isfound in VBT****
[ 2.178128] [drm:intel_dsm_pci_probe], no _DSM method for intel device****
[ 2.178153] [drm:intel_modeset_init], 2 display pipes available.****[ 2.178159] vgaarb: device changed decodes:PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem****
[ 2.178479] [drm:intel_crt_init], pch crt adpa set to 0xf40000****[ 2.180734] [drm:intel_sdvo_read_byte], i2c transfer returned -6****[ 2.180735] [drm:intel_sdvo_init], No SDVO device found on SDVOB****[ 2.180776] [drm:intel_dp_i2c_init], i2c_init DPDDC-B****[ 2.181283] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181284] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181790] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181791] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181840] [drm:intel_dp_i2c_init], i2c_init DPDDC-C****[ 2.182347] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182348] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182854] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182855] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182884] [drm:intel_dp_i2c_init], i2c_init DPDDC-D****[ 2.183390] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183391] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183898] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183934] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off****[ 2.183937] [drm:i915_get_vblank_timestamp], crtc 0 is disabled****[ 2.198842] hub 1-1:1.0: USB hub found****[ 2.198944] hub 1-1:1.0: 6 ports detected****[ 2.238120] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.262494] [drm:intel_update_fbc], ****[ 2.262738] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off****[ 2.262739] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.262741] [drm:i915_get_vblank_timestamp], crtc 1 is disabled****[ 2.262743] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.263383] [drm:intel_update_fbc], ****[ 2.291371] [drm:init_status_page], render ring hws offset: 0x00000000****
[ 2.291442] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000****
[ 2.291509] [drm:init_status_page], blt ring hws offset: 0x00042000****[ 2.291622] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 2.291624] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplugdetect cycle: adpa=0xf40000****
[ 2.306031] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 2.306037] [drm:intel_crt_detect], CRT not detected via hotplug****[ 2.306041] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 2.306045] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 2.310030] usb 2-1: new high speed USB device number 2 using ehci_hcd****
[ 2.317523] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 2.317525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 2.318032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.326520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.334513] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.342008] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.342014] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 2.342019] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 2.353731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 2.353733] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 2.374028] firewire_core: created device fw0: GUID 001fc6000017dc7a,S400****
[ 2.442408] hub 2-1:1.0: USB hub found****[ 2.442512] hub 2-1:1.0: 8 ports detected****[ 2.449991] ata8: SATA link down (SStatus 0 SControl 300)****[ 2.450005] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.450070] ata7: SATA link down (SStatus 0 SControl 300)****[ 2.450073] ata9: SATA link down (SStatus 0 SControl 300)****[ 2.456453] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7****[ 2.456457] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.457950] Refined TSC clocksource calibration: 3411.132 MHz.****[ 2.457965] Switching to clocksource tsc****[ 2.479593] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 2.479615] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)****[ 2.479747] ata6.00: configured for UDMA/133****[ 2.480239] ata2.00: ATA-8: ST3000DM001-9YN166, CC9B, max UDMA/133****[ 2.480241] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.480762] ata2.00: configured for UDMA/133****[ 2.480862] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1CC9B PQ: 0 ANSI: 5****
[ 2.480948] sd 1:0:0:0: Attached scsi generic sg0 type 0****[ 2.480989] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00TB/2.72 TiB)****
[ 2.480995] sd 1:0:0:0: [sda] 4096-byte physical blocks****[ 2.481031] sd 1:0:0:0: [sda] Write Protect is off****[ 2.481034] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00****[ 2.481043] sd 1:0:0:0: [sda] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.481065] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ1AA0 PQ: 0 ANSI: 5****
[ 2.481175] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00TB/931 GiB)****
[ 2.481192] sd 5:0:0:0: Attached scsi generic sg1 type 0****[ 2.481210] sd 5:0:0:0: [sdb] Write Protect is off****[ 2.481214] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00****[ 2.481230] sd 5:0:0:0: [sdb] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.523901] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >****[ 2.524163] sd 5:0:0:0: [sdb] Attached SCSI disk****[ 2.533977] usb 1-1.1: new high speed USB device number 3 using ehci_hcd****
[ 2.604494] [drm:drm_mode_debug_printmodeline], Modeline23:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 2.604497] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604499] [drm:drm_mode_debug_printmodeline], Modeline22:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 2.604502] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604503] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 2.604505] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.604508] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 2.604510] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 2.604512] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 2.605019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.610331] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.618328] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.625817] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.625823] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 2.625828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 2.626336] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.628997] usbcore: registered new interface driver uas****[ 2.633828] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.634316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.637164] ata10.00: ATA-7: SAMSUNG HD160JJ, WU100-42, max UDMA/100****
[ 2.637172] ata10.00: 312581808 sectors, multi 0: LBA48 ****[ 2.640472] ata10.00: configured for UDMA/100****[ 2.640640] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD160JJWU10 PQ: 0 ANSI: 5****
[ 2.640709] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160GB/149 GiB)****
[ 2.640719] sd 9:0:0:0: Attached scsi generic sg2 type 0****[ 2.640732] sd 9:0:0:0: [sdc] Write Protect is off****[ 2.640734] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00****[ 2.640745] sd 9:0:0:0: [sdc] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.642305] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.649806] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.649813] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 2.649817] [drm:drm_setup_crtcs], ****[ 2.649821] [drm:drm_enable_connectors], connector 5 enabled? no****[ 2.649824] [drm:drm_enable_connectors], connector 8 enabled? no****[ 2.649827] [drm:drm_enable_connectors], connector 11 enabled? no****[ 2.649829] [drm:drm_enable_connectors], connector 14 enabled? no****[ 2.649832] [drm:drm_enable_connectors], connector 16 enabled? yes****[ 2.649835] [drm:drm_enable_connectors], connector 17 enabled? no****[ 2.649837] [drm:drm_enable_connectors], connector 19 enabled? no****[ 2.649840] [drm:drm_target_preferred], looking for cmdline mode onconnector 16****
[ 2.649843] [drm:drm_target_preferred], looking for preferred mode onconnector 16****
[ 2.649847] [drm:drm_target_preferred], found mode 1024x768****[ 2.649849] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config****
[ 2.649854] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3****
[ 2.651934] sdc: sdc1 sdc2****[ 2.652102] sd 9:0:0:0: [sdc] Attached SCSI disk****[ 2.652539] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, boffff88022026e200****
[ 2.652572] fbcon: inteldrmfb (fb0) is primary device****[ 2.652601] [drm:drm_crtc_helper_set_config], ****[ 2.652602] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.652605] [drm:drm_crtc_helper_set_config], crtc has no fb, full modeset****
[ 2.652606] [drm:drm_crtc_helper_set_config], modes are different, fullmode set****
[ 2.652608] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 00 0 0 0 0
0x00x0****[ 2.652610] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652612] [drm:drm_crtc_helper_set_config], encoder changed, fullmode switch****
[ 2.652613] [drm:drm_crtc_helper_set_config], crtc changed, full modeswitch****
[ 2.652614] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.652616] [drm:drm_crtc_helper_set_config], attempting to set modefrom userspace****
[ 2.652617] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652620] [drm:drm_crtc_helper_set_mode], [CRTC:3]****[ 2.652867] [drm:ironlake_crtc_mode_set], Mode for pipe A:****[ 2.652869] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.705766] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.705772] [drm:intel_pipe_set_base_atomic], Writing base 0006300000000000 0 0 4096****
[ 2.705776] [drm:intel_update_fbc], ****[ 2.705779] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705783] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705786] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705790] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.705794] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set[MODE:22:1024x768]****
[ 2.705799] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705803] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705806] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705809] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.713838] usb 2-1.2: new low speed USB device number 3 using ehci_hcd****
[ 2.761732] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.794256] sda: sda1 sda2 sda3 sda4 sda5****[ 2.794477] sd 1:0:0:0: [sda] Attached SCSI disk****[ 2.795014] Initializing USB Mass Storage driver...****[ 2.795076] scsi10 : usb-storage 1-1.1:1.0****[ 2.795232] usbcore: registered new interface driver usb-storage****[ 2.795243] USB Mass Storage support registered.****[ 2.817689] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.818492] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700****[ 2.818494] [drm:gen6_fdi_link_train], FDI train 1 done.****[ 2.819143] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600****[ 2.819145] [drm:gen6_fdi_link_train], FDI train 2 done.****[ 2.819146] [drm:gen6_fdi_link_train], FDI train done.****[ 2.820350] [drm:intel_update_fbc], ****[ 2.820357] [drm:drm_crtc_helper_set_config], Setting connector DPMSstate to on****
[ 2.820359] [drm:drm_crtc_helper_set_config],[CONNECTOR:16:HDMI-A-3] set DPMS on****
[ 2.820375] [drm:drm_crtc_helper_set_config], ****[ 2.820376] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 2.820379] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820382] Console: switching to colour frame buffer device 128x48****[ 2.820389] [drm:drm_crtc_helper_set_config], ****[ 2.820390] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.820392] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820861] input: CHICONY HP Basic USB Keyboard as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2****
[ 2.820907] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HIDv1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:1d.0-1.2/input0****[ 2.820913] usbcore: registered new interface driver usbhid****[ 2.820914] usbhid: USB HID core driver****[ 2.821963] fb0: inteldrmfb frame buffer device****[ 2.821976] drm: registered panic notifier****[ 2.822622] fixme: max PWM is zero.****[ 2.822700] acpi device:42: registered as cooling_device8****[ 2.822882] input: Video Bus as/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3****
[ 2.822935] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:no)****
[ 2.822965] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 onminor 0****
[ 2.837055] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 2.885730] usb 2-1.3: new low speed USB device number 4 using ehci_hcd****
[ 2.984274] input: Logitech Logitech USB Optical Mouse as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4****
[ 2.984351] generic-usb 0003:046D:C018.0002: input,hidraw1: USB HIDv1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0****
[ 3.057611] usb 2-1.7: new full speed USB device number 5 using ehci_hcd****
[ 3.395112] [drm:drm_crtc_helper_set_config], ****[ 3.395114] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.395119] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445386] [drm:i915_driver_open], ****[ 3.445394] [drm:drm_crtc_helper_set_config], ****[ 3.445395] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445401] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445403] [drm:drm_crtc_helper_set_config], ****[ 3.445404] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445406] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445411] [drm:i915_driver_open], ****[ 3.445414] [drm:drm_crtc_helper_set_config], ****[ 3.445415] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445417] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445418] [drm:drm_crtc_helper_set_config], ****[ 3.445419] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445421] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445425] [drm:i915_driver_open], ****[ 3.445458] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445460] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445464] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445466] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445470] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445471] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445473] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445475] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445476] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445479] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445480] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445481] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445483] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.445485] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.456667] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.456669] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.456670] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.467863] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.467865] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.467867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.468374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.473769] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.481763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.489269] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.489275] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.489283] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.489287] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.489796] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.497754] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.505751] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.513241] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.513247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.513261] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.513265] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.524452] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.524454] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.524456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.535650] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.535652] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.535654] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 3.654399] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 3.772847] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 3.772849] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772851] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 3.772853] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772855] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 3.772857] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 3.772859] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 3.772861] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 3.772864] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.774172] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.774175] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.774681] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.781573] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.789566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.797056] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.797062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.797071] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.797075] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.797582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.805556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.813548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.821041] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.821048] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.821059] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.821063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.821571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.829543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.837537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.845031] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.845037] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.845046] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.845049] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.845557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.853527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.861521] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.869013] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.869020] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.869189] [drm:drm_crtc_helper_set_config], ****[ 3.869190] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.869194] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.893533] EXT4-fs (sdb7): INFO: recovery required on readonlyfilesystem****
[ 3.893550] EXT4-fs (sdb7): write access will be enabled during recovery****
[ 3.921726] scsi 10:0:0:0: Direct-Access Multiple Card Reader1.00 PQ: 0 ANSI: 0****
[ 3.921816] scsi: killing requests for dead queue****[ 3.973015] scsi: killing requests for dead queue****[ 4.032964] scsi: killing requests for dead queue****[ 4.096945] scsi: killing requests for dead queue****[ 4.104941] scsi: killing requests for dead queue****[ 4.105032] scsi: killing requests for dead queue****[ 4.116928] scsi: killing requests for dead queue****[ 4.116993] scsi: killing requests for dead queue****[ 4.117151] sd 10:0:0:0: Attached scsi generic sg3 type 0****[ 4.252427] EXT4-fs (sdb7): orphan cleanup on readonly fs****[ 4.252444] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684717****
[ 4.252459] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684687****
[ 4.252463] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684686****
[ 4.252466] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684685****
[ 4.252469] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684684****
[ 4.252472] EXT4-fs (sdb7): 5 orphan inodes deleted****[ 4.252483] EXT4-fs (sdb7): recovery complete****[ 4.811475] sd 10:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9GB/14.8 GiB)****
[ 4.812219] sd 10:0:0:0: [sdd] Write Protect is off****[ 4.812247] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00****[ 4.812979] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.813012] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.815842] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.815873] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.828350] sdd: sdd1****[ 4.830958] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.830990] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.831022] sd 10:0:0:0: [sdd] Attached SCSI removable disk****[ 5.120434] EXT4-fs (sdb7): mounted filesystem with ordered data mode.Opts: (null)****
[ 12.835229] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 12.835236] [drm:intel_crt_detect], CRT not detected via hotplug****[ 12.835239] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 12.846381] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 12.846886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.851717] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.859713] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.867202] [drm:ironlake_dp_detect], DPCD: 0000****[ 12.867208] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 12.878344] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 12.996642] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 12.996644] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 12.997149] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.003620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.011615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.019105] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.019111] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 13.019621] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.027603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.035599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.043095] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.043101] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 16.146711] udevd[409]: starting version 173****[ 16.169520] lp: driver loaded but no devices found****[ 16.170859] mei: module is from the staging directory, the quality isunknown, you have been warned.****
[ 16.171147] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21****
[ 16.171153] mei 0000:00:16.0: setting latency timer to 64****[ 16.193866] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->IRQ 22****
[ 16.193870] hda_intel: position_fix set to 1 for device 1043:8410****[ 16.193917] HDA Intel 0000:00:1b.0: irq 67 for MSI/MSI-X****[ 16.193942] HDA Intel 0000:00:1b.0: setting latency timer to 64****[ 16.214075] asus_wmi: ASUS WMI generic driver loaded****[ 16.214419] asus_wmi: Initialization: 0x0****[ 16.214442] asus_wmi: BIOS WMI version: 0.9****[ 16.214484] asus_wmi: SFUN value: 0x0****[ 16.215277] input: Eee PC WMI hotkeys as/devices/platform/eeepc-wmi/input/input5****
[ 16.215546] asus_wmi: Backlight controlled by ACPI video driver****[ 16.239033] Bluetooth: Atheros AR30xx firmware driver ver 1.0****[ 16.319694] Adding 10485756k swap on /dev/sdb5. Priority:-1 extents:1across:10485756k ****
[ 16.344070] type=1400 audit(1326825620.063:2): apparmor="STATUS"operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser"****
[ 16.344082] type=1400 audit(1326825620.063:3): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=461 comm="apparmor_parser"****
[ 16.344112] type=1400 audit(1326825620.063:4): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=604 comm="apparmor_parser"****
[ 16.344294] type=1400 audit(1326825620.063:5): apparmor="STATUS"operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"****
[ 16.344310] type=1400 audit(1326825620.063:6): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"****
[ 16.344337] type=1400 audit(1326825620.063:7): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"****
[ 16.344432] type=1400 audit(1326825620.063:8): apparmor="STATUS"operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"****
[ 16.344449] type=1400 audit(1326825620.063:9): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"****
[ 16.344490] type=1400 audit(1326825620.063:10): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"****
[ 16.345721] type=1400 audit(1326825620.067:11): apparmor="STATUS"operation="profile_load" name="/usr/sbin/ntpd" pid=784 comm="apparmor_parser"****
[ 16.489020] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.544890] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.545319] ADDRCONF(NETDEV_UP): eth1: link is not ready****[ 16.550021] 8139too 0000:08:01.0: eth0: link up, 100Mbps, full-duplex,lpa 0x45E1****
[ 16.583061] usbcore: registered new interface driver ath3k****[ 16.602755] usb 2-1.7: USB disconnect, device number 5****[ 16.738566] hda_codec: ALC892: BIOS auto-probing.****[ 16.745452] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.745470] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.745524] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.751944] HDMI: detected monitor at connection type HDMI****[ 16.751945] HDMI: available speakers: FL/FR****[ 16.751947] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.752027] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.752109] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.753555] HDMI: detected monitor at connection type HDMI****[ 16.753556] HDMI: available speakers: FL/FR****[ 16.753558] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.753900] input: HDA Intel PCH HDMI/DP,pcm=7 as/devices/pci0000:00/0000:00:1b.0/sound/card0/input6****
[ 16.754026] input: HDA Intel PCH Headphone as/devices/pci0000:00/0000:00:1b.0/sound/card0/input7****
[ 16.756212] HDMI: detected monitor at connection type HDMI****[ 16.756213] HDMI: available speakers: FL/FR****[ 16.756215] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 17.106570] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro****[ 17.513947] EXT4-fs (sdb1): mounted filesystem with ordered data mode.Opts: (null)****
[ 17.607438] init: Failed to spawn network-manager main process: unableto execute: No such file or directory****
[ 17.607783] init: modemmanager main process (1172) killed by TERM signal****
[ 17.752244] ppdev: user-space parallel port driver****[ 17.805783] init: ssh main process (1139) terminated with status 255****
[ 17.818308] init: failsafe main process (1120) killed by TERM signal****
[ 17.832084] usb 2-1.7: new full speed USB device number 6 using ehci_hcd****
[ 17.863275] init: apport pre-start process (1389) terminated withstatus 1****
[ 17.864535] init: smbd main process (1133) killed by HUP signal****[ 17.864554] init: smbd main process ended, respawning****[ 17.870842] init: apport post-stop process (1439) terminated withstatus 1****
[ 17.873582] init: lightdm main process (1398) killed by TERM signal****[ 17.933637] [drm:i915_driver_open], ****[ 17.933663] [drm:i915_driver_open], ****[ 17.933797] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933799] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933865] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933871] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933872] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933875] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933877] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933881] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933883] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933884] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933911] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.933912] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.936800] Bluetooth: Core ver 2.16****[ 17.936815] NET: Registered protocol family 31****[ 17.936816] Bluetooth: HCI device and connection manager initialized****
[ 17.936818] Bluetooth: HCI socket layer initialized****[ 17.936819] Bluetooth: L2CAP socket layer initialized****[ 17.936870] Bluetooth: SCO socket layer initialized****[ 17.937074] Bluetooth: Generic Bluetooth USB driver ver 0.6****[ 17.937171] usbcore: registered new interface driver btusb****[ 17.945312] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.945316] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.945318] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.956431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.956451] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.956453] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.956959] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.964438] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.976430] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.988023] [drm:ironlake_dp_detect], DPCD: 0000****[ 17.988026] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 17.988030] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.988032] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.988537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.000416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.012408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.023900] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.023905] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.023955] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.023960] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.035069] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.035072] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.035073] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.046272] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.046290] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.046292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.164376] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.282389] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.282393] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282394] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.282396] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.282400] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.282403] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.282405] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.282413] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.282445] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.282447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.282953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.288254] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.296241] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.303737] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.303744] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.303752] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.303756] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.304262] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.312236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.320229] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.327722] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.327728] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.327786] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.327791] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.328297] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.336218] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.344213] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.351710] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.351716] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.351725] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.351729] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.352236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.360206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.368199] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.375693] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.375700] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.375769] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375783] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375787] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375788] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375790] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375792] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375793] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375795] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375796] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375797] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375812] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.375814] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.386924] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.386927] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.386928] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.398015] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.398029] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.398031] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.398535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.404169] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.412168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.419658] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.419665] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.419673] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.419676] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.420183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.428147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.436142] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.443634] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.443638] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.443691] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.443694] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.454886] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.454892] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.454894] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.466030] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.466056] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.466058] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.583871] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.701804] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.701807] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701808] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.701810] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701812] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.701814] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.701816] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.701819] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.701824] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.702251] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.702253] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.702759] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.707980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.715979] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.723467] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.723474] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.723482] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.723486] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.723993] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.731964] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.739961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.747453] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.747459] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.747506] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.747511] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.748019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.755952] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.763941] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.771433] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.771447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.771461] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.771462] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.771967] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.779930] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.787937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.795429] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.795436] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.796613] [drm:drm_mode_addfb], [FB:27]****[ 18.796653] [drm:drm_mode_setcrtc], [CRTC:3]****[ 18.796656] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3]****[ 18.796658] [drm:drm_crtc_helper_set_config], ****[ 18.796659] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27]#connectors=1 (x y) (0 0)****
[ 18.796664] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 18.798703] [drm:intel_pipe_set_base_atomic], Writing base 0036300000000000 0 0 4096****
[ 18.798706] [drm:intel_update_fbc], ****[ 18.808123] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 18.851392] [drm:intel_wait_for_vblank], vblank wait timed out****[ 18.856501] [drm:i915_getparam], Unknown parameter 16****[ 18.871060] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871064] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871068] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871069] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871072] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871074] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871076] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871077] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871079] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871080] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871084] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.871086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.882303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.882306] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.882308] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.893431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.893439] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.893441] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.893946] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.899856] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.907858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.919357] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.919363] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.919377] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.919381] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.919887] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.931836] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.939833] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.947323] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.947328] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.947347] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.947351] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.958432] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.958437] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.958438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.969573] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.969581] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.969583] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.088092] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.206008] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.206011] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206012] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.206015] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206017] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.206019] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.206021] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.206023] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.206035] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.206193] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.206195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.206701] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.211665] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.219668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.227151] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.227156] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.227170] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.227173] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.227679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.235642] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.243644] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.251133] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.251138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.251157] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.251161] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.251668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.259632] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.267631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.275196] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.275200] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.275207] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.275209] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.275716] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.283616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.291614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.299116] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.299124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.301832] [drm:intel_crtc_cursor_set], ****[ 19.375154] Bluetooth: RFCOMM TTY layer initialized****[ 19.375158] Bluetooth: RFCOMM socket layer initialized****[ 19.375160] Bluetooth: RFCOMM ver 1.11****[ 19.375983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3****[ 19.375984] Bluetooth: BNEP filters: protocol multicast****[ 19.404321] init: ssh main process (1294) terminated with status 255****
[ 19.628562] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628567] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628572] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628575] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628578] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628582] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628585] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628588] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628590] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628599] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.628601] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.639574] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.639579] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.639581] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.651063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.651075] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.651077] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.651584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.659374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.667380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.674869] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.674873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.674900] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.674902] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.675408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.683368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.691365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.698854] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.698857] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.698888] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.698890] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.710004] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.710009] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.710010] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.721134] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.721139] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.721141] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.838802] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.956581] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.956585] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956586] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.956589] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.956594] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.956597] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.956600] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.956609] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.956826] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.956828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.957334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.963200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.971193] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.978685] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.978692] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.978707] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.978711] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.979217] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.987183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.995177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.002672] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.002679] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 20.002698] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.002702] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.003210] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.011168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.019162] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.026656] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.026663] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.026677] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.026681] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.027189] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.035154] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.043138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.050642] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.050648] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.080980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.091113] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.099114] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.106606] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.107186] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.115097] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.127104] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.134592] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.135174] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.143081] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.151074] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.162571] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.303064] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 20.303111] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.303113] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.307990] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, FlowControl: Rx/Tx****
[ 20.308391] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready****[ 20.847217] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847222] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847226] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847228] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847230] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847234] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847235] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847237] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847239] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847240] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847245] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.847247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.858379] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.858382] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.858383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.869494] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.869503] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.869505] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.870009] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.874629] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.882627] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.890117] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.890124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.890139] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.890143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.890651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.898616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.906612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.914112] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.914115] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.914135] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.914138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.925263] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.925266] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.925267] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.936388] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.936394] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 20.936396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 21.054345] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 21.172343] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 21.172346] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172347] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 21.172349] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172352] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 21.172353] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 21.172355] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 21.172358] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 21.172367] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 21.172527] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.172529] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.173035] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.178444] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.186442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.193937] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.193943] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.193958] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.193962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.194469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.202427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.210424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.217900] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.217903] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.217933] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.217935] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.218440] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.226399] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.234408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.241904] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.241910] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.241925] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.241930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.242437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.250402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.258392] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.265889] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.265895] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.310406] [drm:i915_driver_open], ****[ 21.310638] [drm:i915_getparam], Unknown parameter 16****[ 22.145057] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0****
[ 22.308835] EXT4-fs (sdb1): re-mounted. Opts: commit=0****[ 22.602011] init: plymouth-stop pre-start process (2161) terminatedwith status 1****
[ 23.252862] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252866] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252870] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252871] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252876] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252878] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252880] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252881] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252882] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252887] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.252889] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.264062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.264065] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.264066] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.275207] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.275216] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.275218] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.275723] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.281128] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.289117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.296613] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.296619] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.296635] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.296639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.297147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.305115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.313112] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.320609] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.320615] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.320635] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.320639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.331753] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.331756] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.331757] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.342870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.342877] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.342879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 23.460856] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 23.578740] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 23.578743] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578745] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 23.578747] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578749] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 23.578751] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 23.578753] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 23.578755] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 23.578762] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.578924] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.578926] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.579431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.584931] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.592927] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.600416] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.600420] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.600446] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.600448] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.600953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.608916] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.616910] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.624403] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.624417] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.624436] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.624438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.624943] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.632899] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.640895] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.648387] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.648390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 23.648417] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.648419] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.648923] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.656886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.664892] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.672383] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.672390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 27.034272] eth0: no IPv6 routers present****[ 27.684552] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684556] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684560] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684561] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684564] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684566] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684568] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684570] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684571] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684572] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684578] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.684579] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.695743] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.695745] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.695746] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.706962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.706970] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.706972] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.707477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.714348] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.722368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.729836] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.729840] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.729872] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.729874] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.730380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.738334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.746362] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.753823] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.753827] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.753861] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.753864] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.765154] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.765161] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.765162] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.776296] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.776302] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 27.776304] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 27.894206] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.012130] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.012134] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012136] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.012140] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012142] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.012145] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.012148] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.012151] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.012158] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.012160] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.012161] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.012163] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 28.023288] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 28.023793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.030161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.038157] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.045649] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.045655] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 28.056760] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 28.174011] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.174013] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 28.174519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.182065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.190061] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.197550] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.197556] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 28.198064] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.206051] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.214046] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.221538] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.221544] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 28.221777] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.221779] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.222284] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.230041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.238038] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.245529] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.245536] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.245551] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.245555] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.246063] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.254027] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.262022] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.269515] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.269522] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.269541] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.269546] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.270052] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.278011] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.286007] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.293500] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.293507] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.293521] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.293525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.294032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.301998] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.309991] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.317484] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.317491] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.449308] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449313] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449316] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449318] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449320] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449323] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449324] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449326] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449328] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449329] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449333] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.449335] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.460508] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.460512] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.460514] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.471685] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.471694] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.471696] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.472202] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.477955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.485886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.493376] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.493383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.493398] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.493402] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.493909] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.501872] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.509865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.517358] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.517365] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.517385] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.517389] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.528604] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.528608] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.528609] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.539821] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.539844] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.539846] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 28.657898] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.775791] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.775794] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775795] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.775798] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775800] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.775802] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.775804] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.775806] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.775817] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.775975] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.775977] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.776483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.781695] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.793689] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.801185] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.801192] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.801207] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.801211] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.801718] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.813680] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.821672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.829165] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.829171] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.829191] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.829195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.829702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.837666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.845660] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.853151] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.853157] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.853172] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.853176] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.853684] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.861648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.869636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.877137] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.877143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.896276] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896280] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896284] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896286] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896288] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896291] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896295] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896296] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896298] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896302] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.896303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.907396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.907398] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.907400] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.918540] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.918548] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.918550] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.919056] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.925603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.933599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.941091] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.941098] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.941112] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.941116] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.941624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.949589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.957582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.965079] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.965086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.965106] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.965110] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.976237] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.976241] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.976243] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.987399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.987404] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.987406] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 29.105498] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 29.223447] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 29.223449] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223451] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 29.223453] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223455] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 29.223457] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 29.223459] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 29.223461] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 29.223469] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 29.223624] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.223625] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.224130] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.229416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.237407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.244905] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.244911] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.244926] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.244930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.245437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.253402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.261397] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.268890] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.268896] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.268916] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.268920] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.269427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.277383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.285385] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.292875] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.292881] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 29.292896] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.292900] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.293407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.301372] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.309366] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.316863] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.316870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 30.783932] eth1: no IPv6 routers present****[ 38.259281] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 38.259287] [drm:intel_crt_detect], CRT not detected via hotplug****[ 38.259291] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 38.270384] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 38.270890] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.275767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.283760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.291253] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.291259] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 38.302369] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 38.419728] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 38.419730] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 38.420234] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.427672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.435667] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.443158] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.443164] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 38.443673] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.451655] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.459651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.467143] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.467149] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 62.272823] [drm:intel_crtc_cursor_set], ****[ 62.272826] [drm:intel_crtc_cursor_set], cursor off****[ 62.272850] [drm:intel_crtc_cursor_set], ****[ 69.601430] [drm:intel_crtc_cursor_set], ****[ 69.601433] [drm:intel_crtc_cursor_set], cursor off****[ 95.962368] [drm:intel_crtc_cursor_set], ****[ 99.190494] [drm:intel_crtc_cursor_set], ****[ 99.190498] [drm:intel_crtc_cursor_set], cursor off****[ 101.207418] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207425] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207430] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207434] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207444] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207450] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207453] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207465] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.207468] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.218731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.218740] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.218745] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.229913] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.229921] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.229923] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.230428] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.236486] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.244496] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.251966] [drm:ironlake_dp_detect], DPCD: 0000****[ 101.251973] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 101.251987] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.251991] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.252499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.260459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.268473] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.275945] [drm:ironlake_dp_detect], DPCD: 0000****[ 101.275952] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 101.275972] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 101.275976] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 101.287238] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 101.287244] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 101.287247] [drm:drm_helper_probe_single_connector_modes],2,916 lines not shown · raw message
Quoted 10 lines
6 lines not shown · raw message
4 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Hi all,
To debug modeset issues we usually need a full dmesg with drm.debug=0xe added to the kernel command line. Can you please attach that?
Also, Rodrigo is trying to improve our hdmi/tv support, maybe he's got an idea, cc'ed.
Yours, Daniel
Quoted 10,640 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
thank you,
alfonsoQuoted 10,600 lines · Angela Schmid
Hello****
** **
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.** **
Nvidia noveau with GTX275 (using yellow
DVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.****** **
xorg.conf is empty and use the following command:****
** **
xrandr --newmode "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync****
xrandr --addmode HDMI3 "1920x1080i"****
xrandr --output HDMI3 --mode "1920x1080i"****
** **
The desktop is half and moved to the left. The television is flickering.** **
I tried several other modelines, which work for the noveau driver, but not for the intel driver.****
The highest resolution possible is "1280x720@50hz" 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync****** **
When using only HDMI grub2 will start in 1080i but xorg is not visible afterwards. ****
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr –output VGA1 –off****
** **
Is interlace working with the intel driver ? Any help appreciated.****
Will there be soon support (otherwise I have to buy a NV adapter) ?****
** **
Cheers****
Angela****
** **
System environment:
-- chipset: Sandy Bridge (2600k)
-- system architecture: 64-bit
-- xf86-video-intel: ppa/xorg-edgers: xserver-xorg-video-intel 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric****-- xserver: 1.11.2.902 (1.11.3 RC2)(10 December 2011...) -- mesa: 3.0 Mesa 8.0-devel****
libegl1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libegl1-mesa-drivers/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-dri/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-glx/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglapi-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglu1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libopenvg1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
mesa-utils/oneiric uptodate 8.0.1+git20110129+d8f7d6b-0ubuntu2 -- libdrm:****
libdrm-intel1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-nouveau1a/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-radeon1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm2/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric -- kernel: 3.0.0-14-generic
-- Linux distribution: Ubuntu
-- Machine or mobo model: Asus P8Z68-V PRO -- Display connector: HDMIReproducing steps:
Additional info:****
Intel****
Xrandr****
dmesg****
Xorg.0.log****
Noveau****
Xrandr****
Xorg.0.log****
** **
** **
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192****
VGA1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x41**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: ****HDMI1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x42**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x43**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off auto on ****HDMI2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x44**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
HDMI3 connected 1920x1080+0+0 (
0xb8) normal (normal left inverted right x axis y axis) 640mm x 360mm****Identifier: 0x45**** Timestamp: 102654**** Subpixel: unknown**** Gamma: 1.0:1.0:1.0**** Brightness: 1.0**** Clones: **** CRTC: 0**** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** EDID:**** 00ffffffffffff00410c000001010101**** 00000103804024780ae692a3544a9926**** 0f4a4c21080001010101010101010101**** 010101010101011d80d0721c1620102c**** 258080682100009e011d8018711c1620**** 582c250080682100009e000000fc0050**** 68696c697073204654560a20000000fd**** 00303e0f3209000a20202020202001e3**** 020324f04b0103040506071213141516**** 29091f07150750190786830100006503**** 0c002000011d00bc52d01e20b8285540**** 80682100001e011d007251d01e206e28**** 550080682100001e8c0ad09020403120**** 0c4055008068210000188c0ad08a20e0**** 2d10103e960080682100001800000000**** 0000000000000000000000000000002a**** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
1024x768 (
0x48) 65.0MHz -HSync -VSync****h: width 1024 start 1048 end 1184 total 1344 skew 0 clock48.4KHz****
v: height 768 start 771 end 777 total 806 clock
60.0Hz****800x600 (
0x49) 40.0MHz +HSync +VSync****h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz****v: height 600 start 601 end 605 total 628 clock
60.3Hz****640x480 (
0x4a) 25.2MHz -HSync -VSync****h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz****v: height 480 start 490 end 492 total 525 clock
60.0Hz****194144_1920x1080ix0.0 (
0xb8) 74.2MHz +HSync +VSync Interlace *current*
***h: width 1920 start 2448 end 2492 total 2640 skew 0 clock28.1KHz****
v: height 1080 start 1084 end 1094 total 1125 clock25.0Hz****
DP2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x46**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP3 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x47**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
** **
** **
[ 0.000000] Initializing cgroup subsys cpuset****[ 0.000000] Initializing cgroup subsys cpu****[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gccversion 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)****
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] KERNEL supported cpus:****[ 0.000000] Intel GenuineIntel****[ 0.000000] AMD AuthenticAMD****[ 0.000000] Centaur CentaurHauls****[ 0.000000] BIOS-provided physical RAM map:****[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)****
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)****
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)****
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)****
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)****
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000be5cc000 (usable)****
[ 0.000000] BIOS-e820: 00000000be5cc000 - 00000000be628000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000be628000 - 00000000beb36000 (reserved)****
[ 0.000000] BIOS-e820: 00000000beb36000 - 00000000beb39000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beb39000 - 00000000bed9f000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bed9f000 - 00000000bedb0000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedb0000 - 00000000bedc7000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedc7000 - 00000000bedc9000 (usable)****
[ 0.000000] BIOS-e820: 00000000bedc9000 - 00000000bedca000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedca000 - 00000000bedd2000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedd2000 - 00000000beddc000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beddc000 - 00000000bee38000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bee38000 - 00000000bee7b000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bee7b000 - 00000000bf000000 (usable)****
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved)****
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)****
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)****
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)****
[ 0.000000] NX (Execute Disable) protection: active****[ 0.000000] DMI 2.6 present.****[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO,BIOS 1101 11/23/2011****
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000(usable) ==> (reserved)****
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000(usable)****
[ 0.000000] No AGP bridge found****[ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000****[ 0.000000] MTRR default type: uncachable****[ 0.000000] MTRR fixed ranges enabled:****[ 0.000000] 00000-9FFFF write-back****[ 0.000000] A0000-BFFFF uncachable****[ 0.000000] C0000-D3FFF write-protect****[ 0.000000] D4000-E7FFF uncachable****[ 0.000000] E8000-FFFFF write-protect****[ 0.000000] MTRR variable ranges enabled:****[ 0.000000] 0 base 000000000 mask E00000000 write-back****[ 0.000000] 1 base 200000000 mask FC0000000 write-back****[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable****[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable****[ 0.000000] 4 base 22FE00000 mask FFFE00000 uncachable****[ 0.000000] 5 base 230000000 mask FF0000000 uncachable****[ 0.000000] 6 disabled****[ 0.000000] 7 disabled****[ 0.000000] 8 disabled****[ 0.000000] 9 disabled****[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new0x7010600070106****
[ 0.000000] original variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB****[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 3GB, range: 1GB, type UC****[ 0.000000] reg 4, base: 8958MB, range: 2MB, type UC****[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC****[ 0.000000] total RAM covered: 7926M****[ 0.000000] Found optimal setting for mtrr clean up****[ 0.000000] gran_size: 64K chunk_size: 16M
num_reg: 7 lose cover RAM: 0G****[ 0.000000] New variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB****[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB****[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB****[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB****[ 0.000000] reg 6, base: 8958MB, range: 2MB, type UC****[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000(usable) ==> (reserved)****
[ 0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000****[ 0.000000] found SMP MP-table at [ffff8800000fcf10] fcf10****[ 0.000000] initial memory mapped : 0 - 20000000****[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size20480****
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf000000****[ 0.000000] 0000000000 - 00bf000000 page 2M****[ 0.000000] kernel direct mapping tables up to bf000000 @1fffc000-20000000****
[ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000****[ 0.000000] 0100000000 - 022fe00000 page 2M****[ 0.000000] kernel direct mapping tables up to 22fe00000 @beff6000-bf000000****
[ 0.000000] RAMDISK: 358ee000 - 36c6f000****[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)****[ 0.000000] ACPI: XSDT 00000000be61d068 0004C (v01 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: FACP 00000000be627250 000F4 (v04 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: DSDT 00000000be61d140 0A10B (v02 ALASKA A M I00000000 INTL 20051117)****
[ 0.000000] ACPI: FACS 00000000bedd3f80 00040****[ 0.000000] ACPI: APIC 00000000be627348 00092 (v03 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: SSDT 00000000be6273e0 001D6 (v01 AMICPU PROC00000001 MSFT 03000001)****
[ 0.000000] ACPI: MCFG 00000000be6275b8 0003C (v01 ALASKA A M I01072009 MSFT 00000097)****
[ 0.000000] ACPI: HPET 00000000be6275f8 00038 (v01 ALASKA A M I01072009 AMI. 00000004)****
[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] No NUMA configuration found****[ 0.000000] Faking a node at 0000000000000000-000000022fe00000****[ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000****[ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff]****[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->[ffff880227800000-ffff88022e5fffff] on node 0****
[ 0.000000] Zone PFN ranges:****[ 0.000000] DMA 0x00000010 -> 0x00001000****[ 0.000000] DMA32 0x00001000 -> 0x00100000****[ 0.000000] Normal 0x00100000 -> 0x0022fe00****[ 0.000000] Movable zone start PFN for each node****[ 0.000000] early_node_map[7] active PFN ranges****[ 0.000000] 0: 0x00000010 -> 0x0000009b****[ 0.000000] 0: 0x00000100 -> 0x00020000****[ 0.000000] 0: 0x00020200 -> 0x00040000****[ 0.000000] 0: 0x00040200 -> 0x000be5cc****[ 0.000000] 0: 0x000bedc7 -> 0x000bedc9****[ 0.000000] 0: 0x000bee7b -> 0x000bf000****[ 0.000000] 0: 0x00100000 -> 0x0022fe00****[ 0.000000] On node 0 totalpages: 2023646****[ 0.000000] DMA zone: 56 pages used for memmap****[ 0.000000] DMA zone: 5 pages reserved****[ 0.000000] DMA zone: 3918 pages, LIFO batch:0****[ 0.000000] DMA32 zone: 14280 pages used for memmap****[ 0.000000] DMA32 zone: 760715 pages, LIFO batch:31****[ 0.000000] Normal zone: 17017 pages used for memmap****[ 0.000000] Normal zone: 1227655 pages, LIFO batch:31****[ 0.000000] ACPI: PM-Timer IO Port: 0x408****[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)****[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])****[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])****[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI0-23****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)****
[ 0.000000] ACPI: IRQ0 used by override.****[ 0.000000] ACPI: IRQ2 used by override.****[ 0.000000] ACPI: IRQ9 used by override.****[ 0.000000] Using ACPI (MADT) for SMP configuration information****[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000****[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs****[ 0.000000] nr_irqs_gsi: 40****[ 0.000000] PM: Registered nosave memory: 000000000009b000 -000000000009c000****
[ 0.000000] PM: Registered nosave memory: 000000000009c000 -00000000000a0000****
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -00000000000e0000****
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -0000000000100000****
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -0000000020200000****
[ 0.000000] PM: Registered nosave memory: 0000000040000000 -0000000040200000****
[ 0.000000] PM: Registered nosave memory: 00000000be5cc000 -00000000be628000****
[ 0.000000] PM: Registered nosave memory: 00000000be628000 -00000000beb36000****
[ 0.000000] PM: Registered nosave memory: 00000000beb36000 -00000000beb39000****
[ 0.000000] PM: Registered nosave memory: 00000000beb39000 -00000000bed9f000****
[ 0.000000] PM: Registered nosave memory: 00000000bed9f000 -00000000bedb0000****
[ 0.000000] PM: Registered nosave memory: 00000000bedb0000 -00000000bedc7000****
[ 0.000000] PM: Registered nosave memory: 00000000bedc9000 -00000000bedca000****
[ 0.000000] PM: Registered nosave memory: 00000000bedca000 -00000000bedd2000****
[ 0.000000] PM: Registered nosave memory: 00000000bedd2000 -00000000beddc000****
[ 0.000000] PM: Registered nosave memory: 00000000beddc000 -00000000bee38000****
[ 0.000000] PM: Registered nosave memory: 00000000bee38000 -00000000bee7b000****
[ 0.000000] PM: Registered nosave memory: 00000000bf000000 -00000000bf800000****
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 -00000000cfa00000****
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 -00000000fed1c000****
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -00000000fed20000****
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -00000000ff000000****
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -0000000100000000****
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap:cfa00000:2f31c000)****
[ 0.000000] Booting paravirtualized kernel on bare hardware****[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8nr_node_ids:1****
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79616r8192 d22784 u262144****
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152****[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 ****[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 1992288****
[ 0.000000] Policy zone: Normal****[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)****[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340****[ 0.000000] Checking aperture...****[ 0.000000] No AGP bridge found****[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area****[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -bailing!****
[ 0.000000] Memory: 7881468k/9172992k available (6109k kernel code,1078408k absent, 213116k reserved, 4876k data, 984k init)****
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,CPUs=8, Nodes=1****
[ 0.000000] Hierarchical RCU implementation.****[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.****
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16****[ 0.000000] Extended CMOS year: 2000****[ 0.000000] Console: colour dummy device 80x25****[ 0.000000] console [tty0] enabled****[ 0.000000] allocated 65011712 bytes of page_cgroup****[ 0.000000] please try 'cgroup_disable=memory' option if you don't wantmemory cgroups****
[ 0.000000] hpet clockevent registered****[ 0.000000] Fast TSC calibration using PIT****[ 0.004000] Detected 3410.641 MHz processor.****[ 0.000002] Calibrating delay loop (skipped), value calculated usingtimer frequency.. 6821.28 BogoMIPS (lpj=13642564)****
[ 0.000006] pid_max: default: 32768 minimum: 301****[ 0.000023] Security Framework initialized****[ 0.000032] AppArmor: AppArmor initialized****[ 0.000034] Yama: becoming mindful.****[ 0.000562] Dentry cache hash table entries: 1048576 (order: 11,8388608 bytes)****
[ 0.001795] Inode-cache hash table entries: 524288 (order: 10, 4194304bytes)****
[ 0.002278] Mount-cache hash table entries: 256****[ 0.002349] Initializing cgroup subsys cpuacct****[ 0.002353] Initializing cgroup subsys memory****[ 0.002358] Initializing cgroup subsys devices****[ 0.002360] Initializing cgroup subsys freezer****[ 0.002362] Initializing cgroup subsys net_cls****[ 0.002364] Initializing cgroup subsys blkio****[ 0.002369] Initializing cgroup subsys perf_event****[ 0.002387] CPU: Physical Processor ID: 0****[ 0.002389] CPU: Processor Core ID: 0****[ 0.002394] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'****[ 0.002394] ENERGY_PERF_BIAS: View and update withx86_energy_perf_policy(8)****
[ 0.002399] mce: CPU supports 9 MCE banks****[ 0.002409] CPU0: Thermal monitoring enabled (TM1)****[ 0.002417] using mwait in idle threads.****[ 0.004052] ACPI: Core revision 20110413****[ 0.219039] ftrace: allocating 25647 entries in 101 pages****[ 0.225855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1****[ 0.265509] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07****
[ 0.372139] Performance Events: PEBS fmt1+, SandyBridge events, IntelPMU driver.****
[ 0.372145] ... version: 3****[ 0.372146] ... bit width: 48****[ 0.372148] ... generic registers: 4****[ 0.372149] ... value mask: 0000ffffffffffff****[ 0.372151] ... max period: 000000007fffffff****[ 0.372153] ... fixed-purpose events: 3****[ 0.372154] ... event mask: 000000070000000f****[ 0.372410] Booting Node 0, Processors #1****[ 0.372412] smpboot cpu 1: start_ip = 96000****[ 0.480208] #2****[ 0.480211] smpboot cpu 2: start_ip = 96000****[ 0.588103] #3****[ 0.588106] smpboot cpu 3: start_ip = 96000****[ 0.696095] #4****[ 0.696098] smpboot cpu 4: start_ip = 96000****[ 0.803954] #5****[ 0.803957] smpboot cpu 5: start_ip = 96000****[ 0.911949] #6****[ 0.911951] smpboot cpu 6: start_ip = 96000****[ 1.019844] #7 Ok.****[ 1.019848] smpboot cpu 7: start_ip = 96000****[ 1.127692] Brought up 8 CPUs****[ 1.127696] Total of 8 processors activated (54575.83 BogoMIPS).****[ 1.132439] devtmpfs: initialized****[ 1.132522] PM: Registering ACPI NVS region at be5cc000 (376832 bytes)****
[ 1.132528] PM: Registering ACPI NVS region at beb36000 (12288 bytes)****
[ 1.132531] PM: Registering ACPI NVS region at bed9f000 (69632 bytes)****
[ 1.132533] PM: Registering ACPI NVS region at bedc9000 (4096 bytes)****
[ 1.132535] PM: Registering ACPI NVS region at bedd2000 (40960 bytes)****
[ 1.132538] PM: Registering ACPI NVS region at bee38000 (274432 bytes)****
[ 1.133403] print_constraints: dummy: ****[ 1.133428] Time: 18:40:04 Date: 01/17/12****[ 1.133450] NET: Registered protocol family 16****[ 1.133513] Trying to unpack rootfs image as initramfs...****[ 1.133517] ACPI: bus type pci registered****[ 1.133553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.133557] PCI: not using MMCONFIG****[ 1.133558] PCI: Using configuration type 1 for base access****[ 1.133982] bio: create slab <bio-0> at 0****[ 1.134828] ACPI: EC: Look up EC in DSDT****[ 1.135589] ACPI: Executed 1 blocks of module-level executable AML code****
[ 1.137110] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND(20110413/psargs-359)****
[ 1.137116] ACPI Exception: AE_NOT_FOUND, Could not execute argumentsfor [RAMW] (Region) (20110413/nsinit-349)****
[ 1.137292] ACPI: SSDT 00000000bedd2818 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137570] ACPI: Dynamic OEM Table Load:****[ 1.137573] ACPI: SSDT (null) 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137601] ACPI: SSDT 00000000bedd9a18 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.137820] ACPI: Dynamic OEM Table Load:****[ 1.137822] ACPI: SSDT (null) 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.138317] ACPI: Interpreter enabled****[ 1.138320] ACPI: (supports S0 S1 S3 S4 S5)****[ 1.138333] ACPI: Using IOAPIC for interrupt routing****[ 1.138348] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.138384] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved inACPI motherboard resources****
[ 1.149715] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored****[ 1.152841] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =0x62****
[ 1.152951] ACPI: No dock devices found.****[ 1.152954] HEST: Table not found.****[ 1.152956] PCI: Using host bridge windows from ACPI; if necessary, use"pci=nocrs" and report a bug****
[ 1.153066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])****[ 1.153184] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]****
[ 1.153187] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]****
[ 1.153189] pci_root PNP0A08:00: host bridge window [mem0x000a0000-0x000bffff]****
[ 1.153192] pci_root PNP0A08:00: host bridge window [mem0x000c8000-0x000dffff]****
[ 1.153195] pci_root PNP0A08:00: host bridge window [mem0xcfa00000-0xffffffff]****
[ 1.153199] pci_root PNP0A08:00: address space collision: host bridgewindow [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]****
[ 1.153208] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600****[ 1.153232] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604****[ 1.153249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold****[ 1.153251] pci 0000:00:01.0: PME# disabled****[ 1.153265] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300****[ 1.153272] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]****
[ 1.153276] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bitpref]****
[ 1.153280] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]****[ 1.153320] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780****[ 1.153341] pci 0000:00:16.0: reg 10: [mem 0xfbd29000-0xfbd2900f 64bit]****
[ 1.153398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold****[ 1.153401] pci 0000:00:16.0: PME# disabled****[ 1.153428] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200****[ 1.153444] pci 0000:00:19.0: reg 10: [mem 0xfbd00000-0xfbd1ffff]****[ 1.153452] pci 0000:00:19.0: reg 14: [mem 0xfbd28000-0xfbd28fff]****[ 1.153460] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]****[ 1.153505] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold****[ 1.153508] pci 0000:00:19.0: PME# disabled****[ 1.153530] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03****[ 1.153549] pci 0000:00:1a.0: reg 10: [mem 0xfbd27000-0xfbd273ff]****[ 1.153617] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold****[ 1.153621] pci 0000:00:1a.0: PME# disabled****[ 1.153641] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403****[ 1.153655] pci 0000:00:1b.0: reg 10: [mem 0xfbd20000-0xfbd23fff 64bit]****
[ 1.153704] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold****[ 1.153707] pci 0000:00:1b.0: PME# disabled****[ 1.153726] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604****[ 1.153784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold****[ 1.153787] pci 0000:00:1c.0: PME# disabled****[ 1.153807] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604****[ 1.153865] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold****[ 1.153869] pci 0000:00:1c.1: PME# disabled****[ 1.153889] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604****[ 1.153946] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold****[ 1.153950] pci 0000:00:1c.2: PME# disabled****[ 1.153970] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604****[ 1.154027] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold****[ 1.154031] pci 0000:00:1c.3: PME# disabled****[ 1.154051] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604****[ 1.154108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold****[ 1.154111] pci 0000:00:1c.4: PME# disabled****[ 1.154132] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604****[ 1.154189] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold****[ 1.154193] pci 0000:00:1c.6: PME# disabled****[ 1.154213] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604****[ 1.154270] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold****[ 1.154274] pci 0000:00:1c.7: PME# disabled****[ 1.154298] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03****[ 1.154318] pci 0000:00:1d.0: reg 10: [mem 0xfbd26000-0xfbd263ff]****[ 1.154385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold****[ 1.154389] pci 0000:00:1d.0: PME# disabled****[ 1.154412] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601****[ 1.154519] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106****[ 1.154535] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]****[ 1.154542] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]****[ 1.154549] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]****[ 1.154556] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]****[ 1.154563] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]****[ 1.154570] pci 0000:00:1f.2: reg 24: [mem 0xfbd25000-0xfbd257ff]****[ 1.154600] pci 0000:00:1f.2: PME# supported from D3hot****[ 1.154603] pci 0000:00:1f.2: PME# disabled****[ 1.154618] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05****[ 1.154631] pci 0000:00:1f.3: reg 10: [mem 0xfbd24000-0xfbd240ff 64bit]****
[ 1.154651] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]****[ 1.154687] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.154690] pci 0000:00:01.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154693] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154695] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154736] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.154740] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154744] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154750] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154816] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.154844] pci 0000:03:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]****
[ 1.154964] pci 0000:03:00.0: PME# supported from D3hot D3cold****[ 1.154970] pci 0000:03:00.0: PME# disabled****[ 1.159621] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.159625] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159629] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.159635] pci 0000:00:1c.1: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159676] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.159680] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159684] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.159690] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159750] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101****[ 1.159783] pci 0000:05:00.0: reg 10: [io 0xe040-0xe047]****[ 1.159799] pci 0000:05:00.0: reg 14: [io 0xe030-0xe033]****[ 1.159815] pci 0000:05:00.0: reg 18: [io 0xe020-0xe027]****[ 1.159830] pci 0000:05:00.0: reg 1c: [io 0xe010-0xe013]****[ 1.159846] pci 0000:05:00.0: reg 20: [io 0xe000-0xe00f]****[ 1.159861] pci 0000:05:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]****[ 1.159877] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]****
[ 1.159914] pci 0000:05:00.0: PME# supported from D3hot****[ 1.159919] pci 0000:05:00.0: PME# disabled****[ 1.167614] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.167618] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.167622] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.167627] pci 0000:00:1c.3: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.167695] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.167723] pci 0000:06:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]****
[ 1.167844] pci 0000:06:00.0: PME# supported from D3hot D3cold****[ 1.167850] pci 0000:06:00.0: PME# disabled****[ 1.175609] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.175615] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000](disabled)****
[ 1.175619] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.175625] pci 0000:00:1c.4: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175682] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604****[ 1.175785] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractivedecode)****
[ 1.175790] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.175794] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.175799] pci 0000:00:1c.6: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175801] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.175802] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.175804] pci 0000:00:1c.6: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.175805] pci 0000:00:1c.6: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.175864] pci 0000:08:01.0: [10ec:8139] type 0 class 0x000200****[ 1.175895] pci 0000:08:01.0: reg 10: [io 0xd000-0xd0ff]****[ 1.175912] pci 0000:08:01.0: reg 14: [mem 0xfb901000-0xfb9010ff]****[ 1.176022] pci 0000:08:01.0: supports D1 D2****[ 1.176023] pci 0000:08:01.0: PME# supported from D1 D2 D3hot D3cold****
[ 1.176029] pci 0000:08:01.0: PME# disabled****[ 1.176058] pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00****[ 1.176089] pci 0000:08:02.0: reg 10: [mem 0xfb900000-0xfb9007ff]****[ 1.176106] pci 0000:08:02.0: reg 14: [io 0xd100-0xd17f]****[ 1.176218] pci 0000:08:02.0: supports D2****[ 1.176219] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold****[ 1.176225] pci 0000:08:02.0: PME# disabled****[ 1.176300] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractivedecode)****
[ 1.176311] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.176316] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.176326] pci 0000:07:00.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.176327] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff](subtractive decode)****
[ 1.176328] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff] (subtractive decode)****
[ 1.176330] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176331] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176333] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.176334] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.176336] pci 0000:07:00.0: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.176337] pci 0000:07:00.0: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.176408] pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106****[ 1.176425] pci 0000:09:00.0: reg 10: [io 0xc040-0xc047]****[ 1.176437] pci 0000:09:00.0: reg 14: [io 0xc030-0xc033]****[ 1.176450] pci 0000:09:00.0: reg 18: [io 0xc020-0xc027]****[ 1.176462] pci 0000:09:00.0: reg 1c: [io 0xc010-0xc013]****[ 1.176474] pci 0000:09:00.0: reg 20: [io 0xc000-0xc00f]****[ 1.176486] pci 0000:09:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]****[ 1.176499] pci 0000:09:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]****
[ 1.176533] pci 0000:09:00.0: PME# supported from D3hot****[ 1.176538] pci 0000:09:00.0: PME# disabled****[ 1.183602] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.183607] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.183611] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.183616] pci 0000:00:1c.7: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.183652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]****[ 1.183726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]****
[ 1.183744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]****
[ 1.183759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]****
[ 1.183774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]****
[ 1.183788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]****
[ 1.183814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]****
[ 1.183829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]****
[ 1.183845] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX6.BR24._PRT]****
[ 1.183873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]****
[ 1.183948] pci0000:00: Requesting ACPI _OSC control (0x1d)****[ 1.184064] pci0000:00: ACPI _OSC control (0x1c) granted****[ 1.186647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 1214 15)****
[ 1.186678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 1214 15)****
[ 1.186707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 1415)****
[ 1.186735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 1415)****
[ 1.186762] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 1415)****
[ 1.186789] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 1214 15)****
[ 1.186817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 1214 15)****
[ 1.186845] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 1214 15)****
[ 1.186901] vgaarb: device added:PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none****
[ 1.186908] vgaarb: loaded****[ 1.186909] vgaarb: bridge control possible 0000:00:02.0****[ 1.187004] SCSI subsystem initialized****[ 1.187042] libata version 3.00 loaded.****[ 1.187066] usbcore: registered new interface driver usbfs****[ 1.187073] usbcore: registered new interface driver hub****[ 1.187088] usbcore: registered new device driver usb****[ 1.187132] PCI: Using ACPI for IRQ routing****[ 1.188450] PCI: pci_cache_line_size set to 64 bytes****[ 1.188541] reserve RAM buffer: 000000000009b400 - 000000000009ffff ****
[ 1.188543] reserve RAM buffer: 00000000be5cc000 - 00000000bfffffff ****
[ 1.188545] reserve RAM buffer: 00000000bedc9000 - 00000000bfffffff ****
[ 1.188547] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff ****
[ 1.188548] reserve RAM buffer: 000000022fe00000 - 000000022fffffff ****
[ 1.188604] NetLabel: Initializing****[ 1.188606] NetLabel: domain hash size = 128****[ 1.188607] NetLabel: protocols = UNLABELED CIPSOv4****[ 1.188614] NetLabel: unlabeled traffic allowed by default****[ 1.188641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0****[ 1.188646] hpet0: 8 comparators, 64-bit 14.318180 MHz counter****[ 1.190658] Switching to clocksource hpet****[ 1.191590] Switched to NOHz mode on CPU #0****[ 1.191647] Switched to NOHz mode on CPU #4****[ 1.191650] Switched to NOHz mode on CPU #7****[ 1.191652] Switched to NOHz mode on CPU #2****[ 1.191679] Switched to NOHz mode on CPU #1****[ 1.191682] Switched to NOHz mode on CPU #6****[ 1.191714] Switched to NOHz mode on CPU #5****[ 1.191717] Switched to NOHz mode on CPU #3****[ 1.193951] AppArmor: AppArmor Filesystem Enabled****[ 1.193965] pnp: PnP ACPI init****[ 1.193973] ACPI: bus type pnp registered****[ 1.194061] pnp 00:00: [bus 00-ff]****[ 1.194063] pnp 00:00: [io 0x0cf8-0x0cff]****[ 1.194064] pnp 00:00: [io 0x0000-0x0cf7 window]****[ 1.194065] pnp 00:00: [io 0x0d00-0xffff window]****[ 1.194066] pnp 00:00: [mem 0x000a0000-0x000bffff window]****[ 1.194068] pnp 00:00: [mem 0x000c8000-0x000dffff window]****[ 1.194069] pnp 00:00: [mem 0xcfa00000-0xffffffff window]****[ 1.194070] pnp 00:00: [mem 0x00000000 window]****[ 1.194109] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03(active)****
[ 1.194141] pnp 00:01: [mem 0xfed10000-0xfed19fff]****[ 1.194142] pnp 00:01: [mem 0xe0000000-0xe3ffffff]****[ 1.194143] pnp 00:01: [mem 0xfed90000-0xfed93fff]****[ 1.194144] pnp 00:01: [mem 0xfed20000-0xfed3ffff]****[ 1.194145] pnp 00:01: [mem 0xfee00000-0xfee0ffff]****[ 1.194170] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved****
[ 1.194173] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved****
[ 1.194176] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved****
[ 1.194178] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved****
[ 1.194181] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved****
[ 1.194184] system 00:01: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194220] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194221] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194222] pnp 00:02: [io 0x0290-0x029f]****[ 1.194223] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194244] system 00:02: [io 0x0290-0x029f] has been reserved****[ 1.194247] system 00:02: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194254] pnp 00:03: [dma 4]****[ 1.194255] pnp 00:03: [io 0x0000-0x000f]****[ 1.194256] pnp 00:03: [io 0x0081-0x0083]****[ 1.194257] pnp 00:03: [io 0x0087]****[ 1.194258] pnp 00:03: [io 0x0089-0x008b]****[ 1.194259] pnp 00:03: [io 0x008f]****[ 1.194260] pnp 00:03: [io 0x00c0-0x00df]****[ 1.194273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)****
[ 1.194278] pnp 00:04: [io 0x0070-0x0071]****[ 1.194286] pnp 00:04: [irq 8]****[ 1.194298] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)****
[ 1.194302] pnp 00:05: [io 0x0061]****[ 1.194314] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)****
[ 1.194323] pnp 00:06: [io 0x0010-0x001f]****[ 1.194324] pnp 00:06: [io 0x0022-0x003f]****[ 1.194325] pnp 00:06: [io 0x0044-0x005f]****[ 1.194326] pnp 00:06: [io 0x0063]****[ 1.194327] pnp 00:06: [io 0x0065]****[ 1.194328] pnp 00:06: [io 0x0067-0x006f]****[ 1.194328] pnp 00:06: [io 0x0072-0x007f]****[ 1.194329] pnp 00:06: [io 0x0080]****[ 1.194331] pnp 00:06: [io 0x0084-0x0086]****[ 1.194332] pnp 00:06: [io 0x0088]****[ 1.194333] pnp 00:06: [io 0x008c-0x008e]****[ 1.194334] pnp 00:06: [io 0x0090-0x009f]****[ 1.194335] pnp 00:06: [io 0x00a2-0x00bf]****[ 1.194336] pnp 00:06: [io 0x00e0-0x00ef]****[ 1.194337] pnp 00:06: [io 0x04d0-0x04d1]****[ 1.194362] system 00:06: [io 0x04d0-0x04d1] has been reserved****[ 1.194365] system 00:06: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194369] pnp 00:07: [io 0x00f0-0x00ff]****[ 1.194373] pnp 00:07: [irq 13]****[ 1.194384] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)****
[ 1.194544] pnp 00:08: [io 0x0400-0x0453]****[ 1.194545] pnp 00:08: [io 0x0458-0x047f]****[ 1.194546] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194547] pnp 00:08: [io 0x0500-0x057f]****[ 1.194548] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]****[ 1.194549] pnp 00:08: [mem 0xfec00000-0xfecfffff]****[ 1.194550] pnp 00:08: [mem 0xfed08000-0xfed08fff]****[ 1.194552] pnp 00:08: [mem 0xff000000-0xffffffff]****[ 1.194575] system 00:08: [io 0x0400-0x0453] has been reserved****[ 1.194577] system 00:08: [io 0x0458-0x047f] has been reserved****[ 1.194580] system 00:08: [io 0x0500-0x057f] has been reserved****[ 1.194582] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved****
[ 1.194585] system 00:08: [mem 0xfec00000-0xfecfffff] could not bereserved****
[ 1.194587] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved****
[ 1.194590] system 00:08: [mem 0xff000000-0xffffffff] has been reserved****
[ 1.194593] system 00:08: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194612] pnp 00:09: [io 0x0454-0x0457]****[ 1.194633] system 00:09: [io 0x0454-0x0457] has been reserved****[ 1.194636] system 00:09: Plug and Play ACPI device, IDs INT3f0dPNP0c02 (active)****
[ 1.194707] pnp 00:0a: [mem 0xfed00000-0xfed003ff]****[ 1.194749] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)****
[ 1.194840] pnp: PnP ACPI: found 11 devices****[ 1.194842] ACPI: ACPI bus type pnp unregistered****[ 1.200033] PCI: max bus depth: 2 pci_try_num: 3****[ 1.200099] pci 0000:00:1c.3: BAR 15: assigned [mem0xcfa00000-0xcfafffff pref]****
[ 1.200102] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.200104] pci 0000:00:01.0: bridge window [io disabled]****[ 1.200107] pci 0000:00:01.0: bridge window [mem disabled]****[ 1.200110] pci 0000:00:01.0: bridge window [mem pref disabled]****[ 1.200113] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.200115] pci 0000:00:1c.0: bridge window [io disabled]****[ 1.200120] pci 0000:00:1c.0: bridge window [mem disabled]****[ 1.200124] pci 0000:00:1c.0: bridge window [mem pref disabled]****[ 1.200131] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.200133] pci 0000:00:1c.1: bridge window [io disabled]****[ 1.200138] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.200143] pci 0000:00:1c.1: bridge window [mem pref disabled]****[ 1.200149] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.200151] pci 0000:00:1c.2: bridge window [io disabled]****[ 1.200156] pci 0000:00:1c.2: bridge window [mem disabled]****[ 1.200160] pci 0000:00:1c.2: bridge window [mem pref disabled]****[ 1.200167] pci 0000:05:00.0: BAR 6: assigned [mem0xcfa00000-0xcfa0ffff pref]****
[ 1.200170] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.200173] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.200179] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.200184] pci 0000:00:1c.3: bridge window [mem0xcfa00000-0xcfafffff pref]****
[ 1.200190] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.200192] pci 0000:00:1c.4: bridge window [io disabled]****[ 1.200198] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.200202] pci 0000:00:1c.4: bridge window [mem pref disabled]****[ 1.200208] pci 0000:07:00.0: PCI bridge to [bus 08-08]****[ 1.200213] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.200221] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200227] pci 0000:07:00.0: bridge window [mem pref disabled]****[ 1.200238] pci 0000:00:1c.6: PCI bridge to [bus 07-08]****[ 1.200241] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.200246] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200251] pci 0000:00:1c.6: bridge window [mem pref disabled]****[ 1.200258] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.200261] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.200266] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.200271] pci 0000:00:1c.7: bridge window [mem pref disabled]****[ 1.200284] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16****
[ 1.200288] pci 0000:00:01.0: setting latency timer to 64****[ 1.200295] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200299] pci 0000:00:1c.0: setting latency timer to 64****[ 1.200305] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16****
[ 1.200309] pci 0000:00:1c.1: setting latency timer to 64****[ 1.200317] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200321] pci 0000:00:1c.2: setting latency timer to 64****[ 1.200329] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200333] pci 0000:00:1c.3: setting latency timer to 64****[ 1.200339] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200344] pci 0000:00:1c.4: setting latency timer to 64****[ 1.200349] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200354] pci 0000:00:1c.6: setting latency timer to 64****[ 1.200360] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18****
[ 1.200366] pci 0000:07:00.0: setting latency timer to 64****[ 1.200373] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200378] pci 0000:00:1c.7: setting latency timer to 64****[ 1.200381] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]****[ 1.200382] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]****[ 1.200383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200385] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200386] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]****[ 1.200388] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]****[ 1.200389] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]****[ 1.200390] pci_bus 0000:05: resource 2 [mem 0xcfa00000-0xcfafffff pref]****
[ 1.200392] pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]****[ 1.200393] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]****[ 1.200394] pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200395] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]****[ 1.200396] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]****[ 1.200398] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200399] pci_bus 0000:07: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200400] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]****[ 1.200401] pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200403] pci_bus 0000:08: resource 4 [io 0xd000-0xdfff]****[ 1.200404] pci_bus 0000:08: resource 5 [mem 0xfb900000-0xfb9fffff]****[ 1.200405] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]****[ 1.200406] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]****[ 1.200408] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]****
[ 1.200409] pci_bus 0000:08: resource 11 [mem 0xcfa00000-0xffffffff]****
[ 1.200410] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]****[ 1.200412] pci_bus 0000:09: resource 1 [mem 0xfb800000-0xfb8fffff]****[ 1.200429] NET: Registered protocol family 2****[ 1.200581] IP route cache hash table entries: 262144 (order: 9,2097152 bytes)****
[ 1.201217] TCP established hash table entries: 524288 (order: 11,8388608 bytes)****
[ 1.202168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)****
[ 1.202287] TCP: Hash tables configured (established 524288 bind 65536)****
[ 1.202290] TCP reno registered****[ 1.202300] UDP hash table entries: 4096 (order: 5, 131072 bytes)****[ 1.202327] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)****
[ 1.202401] NET: Registered protocol family 1****[ 1.202413] pci 0000:00:02.0: Boot video device****[ 1.458661] PCI: CLS 64 bytes, default 64****[ 1.458664] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)****
[ 1.458668] Placing 64MB software IO TLB between ffff8800ba5cc000 -ffff8800be5cc000****
[ 1.458670] software IO TLB at phys 0xba5cc000 - 0xbe5cc000****[ 1.459046] audit: initializing netlink socket (disabled)****[ 1.459053] type=2000 audit(1326825604.028:1): initialized****[ 1.479199] HugeTLB registered 2 MB page size, pre-allocated 0 pages****
[ 1.493833] VFS: Disk quotas dquot_6.5.2****[ 1.493867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)****
[ 1.494192] fuse init (API version 7.16)****[ 1.494238] msgmni has been set to 15393****[ 1.494464] Block layer SCSI generic (bsg) driver version 0.4 loaded(major 253)****
[ 1.494485] io scheduler noop registered****[ 1.494487] io scheduler deadline registered****[ 1.494508] io scheduler cfq registered (default)****[ 1.494590] pcieport 0000:00:01.0: setting latency timer to 64****[ 1.494609] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X****[ 1.494646] pcieport 0000:00:1c.0: setting latency timer to 64****[ 1.494683] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X****[ 1.494738] pcieport 0000:00:1c.1: setting latency timer to 64****[ 1.494774] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X****[ 1.494829] pcieport 0000:00:1c.2: setting latency timer to 64****[ 1.494866] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X****[ 1.494920] pcieport 0000:00:1c.3: setting latency timer to 64****[ 1.494957] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X****[ 1.495011] pcieport 0000:00:1c.4: setting latency timer to 64****[ 1.495047] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X****[ 1.495101] pcieport 0000:00:1c.7: setting latency timer to 64****[ 1.495138] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X****[ 1.495200] pcieport 0000:00:01.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495203] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded****
[ 1.495217] pcieport 0000:00:1c.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495222] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded****
[ 1.495235] pcieport 0000:00:1c.1: Signaling PME through PCIe PMEinterrupt****
[ 1.495238] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495242] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded****
[ 1.495255] pcieport 0000:00:1c.2: Signaling PME through PCIe PMEinterrupt****
[ 1.495260] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded****
[ 1.495272] pcieport 0000:00:1c.3: Signaling PME through PCIe PMEinterrupt****
[ 1.495274] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495279] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded****
[ 1.495292] pcieport 0000:00:1c.4: Signaling PME through PCIe PMEinterrupt****
[ 1.495295] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495299] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded****
[ 1.495312] pcieport 0000:00:1c.7: Signaling PME through PCIe PMEinterrupt****
[ 1.495314] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495319] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded****
[ 1.495327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5****[ 1.495341] pciehp: PCI Express Hot Plug Controller Driver version: 0.4****
[ 1.495365] intel_idle: MWAIT substates: 0x1120****[ 1.495366] intel_idle: v0.4 model 0x2A****[ 1.495366] intel_idle: lapic_timer_reliable_states 0xffffffff****[ 1.495437] input: Power Button as/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0****
[ 1.495443] ACPI: Power Button [PWRB]****[ 1.495465] input: Power Button as/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1****
[ 1.495468] ACPI: Power Button [PWRF]****[ 1.495484] ACPI: acpi_idle yielding to intel_idle****[ 1.507996] ERST: Table is not found!****[ 1.508038] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled****
[ 1.598963] Freeing initrd memory: 19972k freed****[ 1.734643] Linux agpgart interface v0.103****[ 1.734703] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset****[ 1.734811] agpgart-intel 0000:00:00.0: detected gtt size: 2097152Ktotal, 262144K mappable****
[ 1.736156] agpgart-intel 0000:00:00.0: detected 262144K stolen memory****
[ 1.736242] agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000****
[ 1.736783] brd: module loaded****[ 1.737031] loop: module loaded****[ 1.737249] Fixed MDIO Bus: probed****[ 1.737262] PPP generic driver version 2.4.2****[ 1.737279] tun: Universal TUN/TAP device driver, 1.6****[ 1.737281] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>****[ 1.737319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver****
[ 1.737339] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.737353] ehci_hcd 0000:00:1a.0: setting latency timer to 64****[ 1.737356] ehci_hcd 0000:00:1a.0: EHCI Host Controller****[ 1.737375] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned busnumber 1****
[ 1.737398] ehci_hcd 0000:00:1a.0: debug port 2****[ 1.741275] ehci_hcd 0000:00:1a.0: cache line size of 64 is notsupported****
[ 1.741288] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbd27000****[ 1.754372] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00****[ 1.754481] hub 1-0:1.0: USB hub found****[ 1.754485] hub 1-0:1.0: 2 ports detected****[ 1.754523] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.754533] ehci_hcd 0000:00:1d.0: setting latency timer to 64****[ 1.754536] ehci_hcd 0000:00:1d.0: EHCI Host Controller****[ 1.754556] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned busnumber 2****
[ 1.754576] ehci_hcd 0000:00:1d.0: debug port 2****[ 1.758444] ehci_hcd 0000:00:1d.0: cache line size of 64 is notsupported****
[ 1.758448] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbd26000****[ 1.770362] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00****[ 1.770463] hub 2-0:1.0: USB hub found****[ 1.770465] hub 2-0:1.0: 2 ports detected****[ 1.770496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver****[ 1.770503] uhci_hcd: USB Universal Host Controller Interface driver****
[ 1.770534] i8042: PNP: No PS/2 controller found. Probing portsdirectly.****
[ 1.773136] serio: i8042 KBD port at 0x60,0x64 irq 1****[ 1.773141] serio: i8042 AUX port at 0x60,0x64 irq 12****[ 1.773201] mousedev: PS/2 mouse device common for all mice****[ 1.773262] rtc_cmos 00:04: RTC can wake from S4****[ 1.773338] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0****[ 1.773363] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpetirqs****
[ 1.773417] device-mapper: uevent: version 1.0.3****[ 1.773454] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)initialised: [email protected]****
[ 1.773553] cpuidle: using governor ladder****[ 1.773713] cpuidle: using governor menu****[ 1.773715] EFI Variables Facility v0.08 2004-May-17****[ 1.773827] TCP cubic registered****[ 1.773889] NET: Registered protocol family 10****[ 1.774114] NET: Registered protocol family 17****[ 1.774125] Registering the dns_resolver key type****[ 1.774172] PM: Hibernation image not present or could not be loaded.****
[ 1.774178] registered taskstats version 1****[ 1.785213] Magic number: 12:288:696****[ 1.785322] rtc_cmos 00:04: setting system clock to 2012-01-17 18:40:05UTC (1326825605)****
[ 1.786168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found****[ 1.786170] EDD information not available.****[ 1.787102] Freeing unused kernel memory: 984k freed****[ 1.787177] Write protecting the kernel read-only data: 10240k****[ 1.787507] Freeing unused kernel memory: 16k freed****[ 1.790022] Freeing unused kernel memory: 1396k freed****[ 1.800124] udevd[100]: starting version 173****[ 1.808108] wmi: Mapper loaded****[ 1.813001] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2****[ 1.813007] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.****[ 1.813032] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) ->IRQ 18****
[ 1.813044] e1000e 0000:00:19.0: setting latency timer to 64****[ 1.813152] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 1.813724] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->IRQ 17****
[ 1.813749] xhci_hcd 0000:03:00.0: setting latency timer to 64****[ 1.813753] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.813799] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 3****
[ 1.814364] [drm] Initialized drm 1.1.0 20060810****[ 1.817441] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,2004)****
[ 1.817460] 8139cp 0000:08:01.0: This (id 10ec:8139 rev 10) is not an8139C+ compatible chip, use 8139too****
[ 1.817788] 8139too: 8139too Fast Ethernet driver 0.9.28****[ 1.817815] 8139too 0000:08:01.0: PCI INT A -> GSI 19 (level, low) ->IRQ 19****
[ 1.820169] 8139too 0000:08:01.0: eth0: RealTek RTL8139 at 0xd000,00:40:f4:51:8a:62, IRQ 19****
[ 1.820201] firewire_ohci 0000:08:02.0: PCI INT A -> GSI 17 (level,low) -> IRQ 17****
[ 1.874437] firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCIv1.10, 4 IR + 8 IT contexts, quirks 0x11****
[ 1.874902] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbc00000****[ 1.874991] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X****[ 1.875002] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X****[ 1.875004] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X****[ 1.875007] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X****[ 1.875010] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X****[ 1.875012] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X****[ 1.875015] xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X****[ 1.875018] xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X****[ 1.875158] xHCI xhci_add_endpoint called for root hub****[ 1.875159] xHCI xhci_check_bandwidth called for root hub****[ 1.875181] hub 3-0:1.0: USB hub found****[ 1.875188] hub 3-0:1.0: 2 ports detected****[ 1.875234] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.875255] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 4****
[ 1.875322] xHCI xhci_add_endpoint called for root hub****[ 1.875324] xHCI xhci_check_bandwidth called for root hub****[ 1.875342] hub 4-0:1.0: USB hub found****[ 1.875349] hub 4-0:1.0: 2 ports detected****[ 1.875384] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) ->IRQ 16****
[ 1.875409] xhci_hcd 0000:06:00.0: setting latency timer to 64****[ 1.875412] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.875431] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 5****
[ 1.936542] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfba00000****[ 1.936591] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X****[ 1.936594] xhci_hcd 0000:06:00.0: irq 57 for MSI/MSI-X****[ 1.936596] xhci_hcd 0000:06:00.0: irq 58 for MSI/MSI-X****[ 1.936599] xhci_hcd 0000:06:00.0: irq 59 for MSI/MSI-X****[ 1.936601] xhci_hcd 0000:06:00.0: irq 60 for MSI/MSI-X****[ 1.936604] xhci_hcd 0000:06:00.0: irq 61 for MSI/MSI-X****[ 1.936606] xhci_hcd 0000:06:00.0: irq 62 for MSI/MSI-X****[ 1.936609] xhci_hcd 0000:06:00.0: irq 63 for MSI/MSI-X****[ 1.936728] xHCI xhci_add_endpoint called for root hub****[ 1.936729] xHCI xhci_check_bandwidth called for root hub****[ 1.936748] hub 5-0:1.0: USB hub found****[ 1.936756] hub 5-0:1.0: 2 ports detected****[ 1.936787] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.936810] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 6****
[ 1.936861] xHCI xhci_add_endpoint called for root hub****[ 1.936862] xHCI xhci_check_bandwidth called for root hub****[ 1.936872] hub 6-0:1.0: USB hub found****[ 1.936879] hub 6-0:1.0: 2 ports detected****[ 2.066176] usb 1-1: new high speed USB device number 2 using ehci_hcd****
[ 2.107612] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1)14:da:e9:4f:94:94****
[ 2.107616] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 NetworkConnection****
[ 2.107661] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No:FFFFFF-0FF****
[ 2.107675] ahci 0000:00:1f.2: version 3.0****[ 2.107696] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ20****
[ 2.107770] ahci 0000:00:1f.2: irq 64 for MSI/MSI-X****[ 2.122208] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x22impl SATA mode****[ 2.122219] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pioslum part ems apst ****
[ 2.122228] ahci 0000:00:1f.2: setting latency timer to 64****[ 2.130530] scsi0 : ahci****[ 2.130697] scsi1 : ahci****[ 2.130823] scsi2 : ahci****[ 2.130962] scsi3 : ahci****[ 2.131092] scsi4 : ahci****[ 2.131220] scsi5 : ahci****[ 2.131317] ata1: DUMMY****[ 2.131320] ata2: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25180irq 64****[ 2.131322] ata3: DUMMY****[ 2.131323] ata4: DUMMY****[ 2.131324] ata5: DUMMY****[ 2.131327] ata6: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25380irq 64****[ 2.131351] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.131406] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ16****
[ 2.131414] i915 0000:00:02.0: setting latency timer to 64****[ 2.131534] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps
0x3impl SATA mode****[ 2.131538] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slumpart ****
[ 2.131545] ahci 0000:05:00.0: setting latency timer to 64****[ 2.131806] scsi6 : ahci****[ 2.131853] scsi7 : ahci****[ 2.131884] ata7: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10100irq 19****[ 2.131891] ata8: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10180irq 19****[ 2.131909] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.132032] ahci 0000:09:00.0: irq 65 for MSI/MSI-X****[ 2.132083] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps
0x3impl SATA mode****[ 2.132087] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbspio slum part sxs ****
[ 2.132093] ahci 0000:09:00.0: setting latency timer to 64****[ 2.132279] scsi8 : ahci****[ 2.132326] scsi9 : ahci****[ 2.132356] ata9: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810100irq 65****[ 2.132363] ata10: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810180irq 65****[ 2.178012] [drm:intel_opregion_setup], graphic opregion physical addr:0xbeb36018****
[ 2.178037] [drm:intel_opregion_setup], Public ACPI methods supported****
[ 2.178038] [drm:intel_opregion_setup], SWSCI supported****[ 2.178039] [drm:intel_opregion_setup], ASLE supported****[ 2.178057] i915 0000:00:02.0: irq 66 for MSI/MSI-X****[ 2.178060] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).****
[ 2.178063] [drm] Driver supports precise vblank timestamp query.****[ 2.178067] [drm:intel_detect_pch], Found CougarPoint PCH****[ 2.178069] [drm:intel_parse_bios], Using VBT from OpRegion: $VBTSNB/IVB-DESKTOPd****
[ 2.178070] [drm:parse_general_definitions], crt_ddc_bus_pin: 2****[ 2.178073] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBTtables:****
[ 2.178075] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 065000 1024 1048 1184 1344 768 771 777 806
0x80xa****[ 2.178080] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOSVBT tables:****
[ 2.178082] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200"0 162000 1600 1664 1856 2160 1200 1201 1204 1250
0x80xa****[ 2.178120] [drm:parse_sdvo_device_mapping], No SDVO device info isfound in VBT****
[ 2.178128] [drm:intel_dsm_pci_probe], no _DSM method for intel device****
[ 2.178153] [drm:intel_modeset_init], 2 display pipes available.****[ 2.178159] vgaarb: device changed decodes:PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem****
[ 2.178479] [drm:intel_crt_init], pch crt adpa set to 0xf40000****[ 2.180734] [drm:intel_sdvo_read_byte], i2c transfer returned -6****[ 2.180735] [drm:intel_sdvo_init], No SDVO device found on SDVOB****[ 2.180776] [drm:intel_dp_i2c_init], i2c_init DPDDC-B****[ 2.181283] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181284] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181790] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181791] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181840] [drm:intel_dp_i2c_init], i2c_init DPDDC-C****[ 2.182347] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182348] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182854] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182855] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182884] [drm:intel_dp_i2c_init], i2c_init DPDDC-D****[ 2.183390] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183391] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183898] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183934] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off****[ 2.183937] [drm:i915_get_vblank_timestamp], crtc 0 is disabled****[ 2.198842] hub 1-1:1.0: USB hub found****[ 2.198944] hub 1-1:1.0: 6 ports detected****[ 2.238120] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.262494] [drm:intel_update_fbc], ****[ 2.262738] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off****[ 2.262739] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.262741] [drm:i915_get_vblank_timestamp], crtc 1 is disabled****[ 2.262743] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.263383] [drm:intel_update_fbc], ****[ 2.291371] [drm:init_status_page], render ring hws offset: 0x00000000****
[ 2.291442] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000****
[ 2.291509] [drm:init_status_page], blt ring hws offset: 0x00042000****[ 2.291622] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 2.291624] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplugdetect cycle: adpa=0xf40000****
[ 2.306031] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 2.306037] [drm:intel_crt_detect], CRT not detected via hotplug****[ 2.306041] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 2.306045] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 2.310030] usb 2-1: new high speed USB device number 2 using ehci_hcd****
[ 2.317523] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 2.317525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 2.318032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.326520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.334513] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.342008] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.342014] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 2.342019] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 2.353731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 2.353733] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 2.374028] firewire_core: created device fw0: GUID 001fc6000017dc7a,S400****
[ 2.442408] hub 2-1:1.0: USB hub found****[ 2.442512] hub 2-1:1.0: 8 ports detected****[ 2.449991] ata8: SATA link down (SStatus 0 SControl 300)****[ 2.450005] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.450070] ata7: SATA link down (SStatus 0 SControl 300)****[ 2.450073] ata9: SATA link down (SStatus 0 SControl 300)****[ 2.456453] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7****[ 2.456457] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.457950] Refined TSC clocksource calibration: 3411.132 MHz.****[ 2.457965] Switching to clocksource tsc****[ 2.479593] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 2.479615] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)****[ 2.479747] ata6.00: configured for UDMA/133****[ 2.480239] ata2.00: ATA-8: ST3000DM001-9YN166, CC9B, max UDMA/133****[ 2.480241] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.480762] ata2.00: configured for UDMA/133****[ 2.480862] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1CC9B PQ: 0 ANSI: 5****
[ 2.480948] sd 1:0:0:0: Attached scsi generic sg0 type 0****[ 2.480989] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00TB/2.72 TiB)****
[ 2.480995] sd 1:0:0:0: [sda] 4096-byte physical blocks****[ 2.481031] sd 1:0:0:0: [sda] Write Protect is off****[ 2.481034] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00****[ 2.481043] sd 1:0:0:0: [sda] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.481065] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ1AA0 PQ: 0 ANSI: 5****
[ 2.481175] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00TB/931 GiB)****
[ 2.481192] sd 5:0:0:0: Attached scsi generic sg1 type 0****[ 2.481210] sd 5:0:0:0: [sdb] Write Protect is off****[ 2.481214] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00****[ 2.481230] sd 5:0:0:0: [sdb] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.523901] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >****[ 2.524163] sd 5:0:0:0: [sdb] Attached SCSI disk****[ 2.533977] usb 1-1.1: new high speed USB device number 3 using ehci_hcd****
[ 2.604494] [drm:drm_mode_debug_printmodeline], Modeline23:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 2.604497] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604499] [drm:drm_mode_debug_printmodeline], Modeline22:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 2.604502] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604503] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 2.604505] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.604508] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 2.604510] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 2.604512] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 2.605019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.610331] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.618328] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.625817] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.625823] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 2.625828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 2.626336] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.628997] usbcore: registered new interface driver uas****[ 2.633828] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.634316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.637164] ata10.00: ATA-7: SAMSUNG HD160JJ, WU100-42, max UDMA/100****
[ 2.637172] ata10.00: 312581808 sectors, multi 0: LBA48 ****[ 2.640472] ata10.00: configured for UDMA/100****[ 2.640640] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD160JJWU10 PQ: 0 ANSI: 5****
[ 2.640709] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160GB/149 GiB)****
[ 2.640719] sd 9:0:0:0: Attached scsi generic sg2 type 0****[ 2.640732] sd 9:0:0:0: [sdc] Write Protect is off****[ 2.640734] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00****[ 2.640745] sd 9:0:0:0: [sdc] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.642305] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.649806] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.649813] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 2.649817] [drm:drm_setup_crtcs], ****[ 2.649821] [drm:drm_enable_connectors], connector 5 enabled? no****[ 2.649824] [drm:drm_enable_connectors], connector 8 enabled? no****[ 2.649827] [drm:drm_enable_connectors], connector 11 enabled? no****[ 2.649829] [drm:drm_enable_connectors], connector 14 enabled? no****[ 2.649832] [drm:drm_enable_connectors], connector 16 enabled? yes****[ 2.649835] [drm:drm_enable_connectors], connector 17 enabled? no****[ 2.649837] [drm:drm_enable_connectors], connector 19 enabled? no****[ 2.649840] [drm:drm_target_preferred], looking for cmdline mode onconnector 16****
[ 2.649843] [drm:drm_target_preferred], looking for preferred mode onconnector 16****
[ 2.649847] [drm:drm_target_preferred], found mode 1024x768****[ 2.649849] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config****
[ 2.649854] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3****
[ 2.651934] sdc: sdc1 sdc2****[ 2.652102] sd 9:0:0:0: [sdc] Attached SCSI disk****[ 2.652539] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, boffff88022026e200****
[ 2.652572] fbcon: inteldrmfb (fb0) is primary device****[ 2.652601] [drm:drm_crtc_helper_set_config], ****[ 2.652602] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.652605] [drm:drm_crtc_helper_set_config], crtc has no fb, full modeset****
[ 2.652606] [drm:drm_crtc_helper_set_config], modes are different, fullmode set****
[ 2.652608] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 00 0 0 0 0
0x00x0****[ 2.652610] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652612] [drm:drm_crtc_helper_set_config], encoder changed, fullmode switch****
[ 2.652613] [drm:drm_crtc_helper_set_config], crtc changed, full modeswitch****
[ 2.652614] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.652616] [drm:drm_crtc_helper_set_config], attempting to set modefrom userspace****
[ 2.652617] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652620] [drm:drm_crtc_helper_set_mode], [CRTC:3]****[ 2.652867] [drm:ironlake_crtc_mode_set], Mode for pipe A:****[ 2.652869] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.705766] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.705772] [drm:intel_pipe_set_base_atomic], Writing base 0006300000000000 0 0 4096****
[ 2.705776] [drm:intel_update_fbc], ****[ 2.705779] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705783] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705786] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705790] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.705794] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set[MODE:22:1024x768]****
[ 2.705799] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705803] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705806] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705809] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.713838] usb 2-1.2: new low speed USB device number 3 using ehci_hcd****
[ 2.761732] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.794256] sda: sda1 sda2 sda3 sda4 sda5****[ 2.794477] sd 1:0:0:0: [sda] Attached SCSI disk****[ 2.795014] Initializing USB Mass Storage driver...****[ 2.795076] scsi10 : usb-storage 1-1.1:1.0****[ 2.795232] usbcore: registered new interface driver usb-storage****[ 2.795243] USB Mass Storage support registered.****[ 2.817689] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.818492] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700****[ 2.818494] [drm:gen6_fdi_link_train], FDI train 1 done.****[ 2.819143] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600****[ 2.819145] [drm:gen6_fdi_link_train], FDI train 2 done.****[ 2.819146] [drm:gen6_fdi_link_train], FDI train done.****[ 2.820350] [drm:intel_update_fbc], ****[ 2.820357] [drm:drm_crtc_helper_set_config], Setting connector DPMSstate to on****
[ 2.820359] [drm:drm_crtc_helper_set_config],[CONNECTOR:16:HDMI-A-3] set DPMS on****
[ 2.820375] [drm:drm_crtc_helper_set_config], ****[ 2.820376] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 2.820379] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820382] Console: switching to colour frame buffer device 128x48****[ 2.820389] [drm:drm_crtc_helper_set_config], ****[ 2.820390] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.820392] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820861] input: CHICONY HP Basic USB Keyboard as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2****
[ 2.820907] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HIDv1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:1d.0-1.2/input0****[ 2.820913] usbcore: registered new interface driver usbhid****[ 2.820914] usbhid: USB HID core driver****[ 2.821963] fb0: inteldrmfb frame buffer device****[ 2.821976] drm: registered panic notifier****[ 2.822622] fixme: max PWM is zero.****[ 2.822700] acpi device:42: registered as cooling_device8****[ 2.822882] input: Video Bus as/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3****
[ 2.822935] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:no)****
[ 2.822965] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 onminor 0****
[ 2.837055] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 2.885730] usb 2-1.3: new low speed USB device number 4 using ehci_hcd****
[ 2.984274] input: Logitech Logitech USB Optical Mouse as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4****
[ 2.984351] generic-usb 0003:046D:C018.0002: input,hidraw1: USB HIDv1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0****
[ 3.057611] usb 2-1.7: new full speed USB device number 5 using ehci_hcd****
[ 3.395112] [drm:drm_crtc_helper_set_config], ****[ 3.395114] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.395119] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445386] [drm:i915_driver_open], ****[ 3.445394] [drm:drm_crtc_helper_set_config], ****[ 3.445395] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445401] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445403] [drm:drm_crtc_helper_set_config], ****[ 3.445404] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445406] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445411] [drm:i915_driver_open], ****[ 3.445414] [drm:drm_crtc_helper_set_config], ****[ 3.445415] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445417] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445418] [drm:drm_crtc_helper_set_config], ****[ 3.445419] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445421] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445425] [drm:i915_driver_open], ****[ 3.445458] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445460] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445464] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445466] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445470] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445471] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445473] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445475] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445476] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445479] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445480] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445481] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445483] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.445485] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.456667] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.456669] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.456670] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.467863] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.467865] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.467867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.468374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.473769] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.481763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.489269] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.489275] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.489283] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.489287] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.489796] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.497754] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.505751] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.513241] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.513247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.513261] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.513265] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.524452] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.524454] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.524456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.535650] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.535652] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.535654] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 3.654399] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 3.772847] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 3.772849] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772851] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 3.772853] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772855] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 3.772857] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 3.772859] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 3.772861] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 3.772864] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.774172] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.774175] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.774681] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.781573] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.789566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.797056] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.797062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.797071] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.797075] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.797582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.805556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.813548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.821041] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.821048] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.821059] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.821063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.821571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.829543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.837537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.845031] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.845037] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.845046] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.845049] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.845557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.853527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.861521] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.869013] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.869020] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.869189] [drm:drm_crtc_helper_set_config], ****[ 3.869190] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.869194] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.893533] EXT4-fs (sdb7): INFO: recovery required on readonlyfilesystem****
[ 3.893550] EXT4-fs (sdb7): write access will be enabled during recovery****
[ 3.921726] scsi 10:0:0:0: Direct-Access Multiple Card Reader1.00 PQ: 0 ANSI: 0****
[ 3.921816] scsi: killing requests for dead queue****[ 3.973015] scsi: killing requests for dead queue****[ 4.032964] scsi: killing requests for dead queue****[ 4.096945] scsi: killing requests for dead queue****[ 4.104941] scsi: killing requests for dead queue****[ 4.105032] scsi: killing requests for dead queue****[ 4.116928] scsi: killing requests for dead queue****[ 4.116993] scsi: killing requests for dead queue****[ 4.117151] sd 10:0:0:0: Attached scsi generic sg3 type 0****[ 4.252427] EXT4-fs (sdb7): orphan cleanup on readonly fs****[ 4.252444] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684717****
[ 4.252459] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684687****
[ 4.252463] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684686****
[ 4.252466] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684685****
[ 4.252469] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684684****
[ 4.252472] EXT4-fs (sdb7): 5 orphan inodes deleted****[ 4.252483] EXT4-fs (sdb7): recovery complete****[ 4.811475] sd 10:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9GB/14.8 GiB)****
[ 4.812219] sd 10:0:0:0: [sdd] Write Protect is off****[ 4.812247] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00****[ 4.812979] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.813012] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.815842] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.815873] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.828350] sdd: sdd1****[ 4.830958] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.830990] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.831022] sd 10:0:0:0: [sdd] Attached SCSI removable disk****[ 5.120434] EXT4-fs (sdb7): mounted filesystem with ordered data mode.Opts: (null)****
[ 12.835229] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 12.835236] [drm:intel_crt_detect], CRT not detected via hotplug****[ 12.835239] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 12.846381] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 12.846886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.851717] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.859713] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.867202] [drm:ironlake_dp_detect], DPCD: 0000****[ 12.867208] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 12.878344] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 12.996642] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 12.996644] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 12.997149] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.003620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.011615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.019105] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.019111] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 13.019621] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.027603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.035599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.043095] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.043101] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 16.146711] udevd[409]: starting version 173****[ 16.169520] lp: driver loaded but no devices found****[ 16.170859] mei: module is from the staging directory, the quality isunknown, you have been warned.****
[ 16.171147] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21****
[ 16.171153] mei 0000:00:16.0: setting latency timer to 64****[ 16.193866] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->IRQ 22****
[ 16.193870] hda_intel: position_fix set to 1 for device 1043:8410****[ 16.193917] HDA Intel 0000:00:1b.0: irq 67 for MSI/MSI-X****[ 16.193942] HDA Intel 0000:00:1b.0: setting latency timer to 64****[ 16.214075] asus_wmi: ASUS WMI generic driver loaded****[ 16.214419] asus_wmi: Initialization: 0x0****[ 16.214442] asus_wmi: BIOS WMI version: 0.9****[ 16.214484] asus_wmi: SFUN value: 0x0****[ 16.215277] input: Eee PC WMI hotkeys as/devices/platform/eeepc-wmi/input/input5****
[ 16.215546] asus_wmi: Backlight controlled by ACPI video driver****[ 16.239033] Bluetooth: Atheros AR30xx firmware driver ver 1.0****[ 16.319694] Adding 10485756k swap on /dev/sdb5. Priority:-1 extents:1across:10485756k ****
[ 16.344070] type=1400 audit(1326825620.063:2): apparmor="STATUS"operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser"****
[ 16.344082] type=1400 audit(1326825620.063:3): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=461 comm="apparmor_parser"****
[ 16.344112] type=1400 audit(1326825620.063:4): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=604 comm="apparmor_parser"****
[ 16.344294] type=1400 audit(1326825620.063:5): apparmor="STATUS"operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"****
[ 16.344310] type=1400 audit(1326825620.063:6): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"****
[ 16.344337] type=1400 audit(1326825620.063:7): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"****
[ 16.344432] type=1400 audit(1326825620.063:8): apparmor="STATUS"operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"****
[ 16.344449] type=1400 audit(1326825620.063:9): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"****
[ 16.344490] type=1400 audit(1326825620.063:10): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"****
[ 16.345721] type=1400 audit(1326825620.067:11): apparmor="STATUS"operation="profile_load" name="/usr/sbin/ntpd" pid=784 comm="apparmor_parser"****
[ 16.489020] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.544890] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.545319] ADDRCONF(NETDEV_UP): eth1: link is not ready****[ 16.550021] 8139too 0000:08:01.0: eth0: link up, 100Mbps, full-duplex,lpa 0x45E1****
[ 16.583061] usbcore: registered new interface driver ath3k****[ 16.602755] usb 2-1.7: USB disconnect, device number 5****[ 16.738566] hda_codec: ALC892: BIOS auto-probing.****[ 16.745452] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.745470] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.745524] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.751944] HDMI: detected monitor at connection type HDMI****[ 16.751945] HDMI: available speakers: FL/FR****[ 16.751947] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.752027] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.752109] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.753555] HDMI: detected monitor at connection type HDMI****[ 16.753556] HDMI: available speakers: FL/FR****[ 16.753558] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.753900] input: HDA Intel PCH HDMI/DP,pcm=7 as/devices/pci0000:00/0000:00:1b.0/sound/card0/input6****
[ 16.754026] input: HDA Intel PCH Headphone as/devices/pci0000:00/0000:00:1b.0/sound/card0/input7****
[ 16.756212] HDMI: detected monitor at connection type HDMI****[ 16.756213] HDMI: available speakers: FL/FR****[ 16.756215] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 17.106570] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro****[ 17.513947] EXT4-fs (sdb1): mounted filesystem with ordered data mode.Opts: (null)****
[ 17.607438] init: Failed to spawn network-manager main process: unableto execute: No such file or directory****
[ 17.607783] init: modemmanager main process (1172) killed by TERM signal****
[ 17.752244] ppdev: user-space parallel port driver****[ 17.805783] init: ssh main process (1139) terminated with status 255****
[ 17.818308] init: failsafe main process (1120) killed by TERM signal****
[ 17.832084] usb 2-1.7: new full speed USB device number 6 using ehci_hcd****
[ 17.863275] init: apport pre-start process (1389) terminated withstatus 1****
[ 17.864535] init: smbd main process (1133) killed by HUP signal****[ 17.864554] init: smbd main process ended, respawning****[ 17.870842] init: apport post-stop process (1439) terminated withstatus 1****
[ 17.873582] init: lightdm main process (1398) killed by TERM signal****[ 17.933637] [drm:i915_driver_open], ****[ 17.933663] [drm:i915_driver_open], ****[ 17.933797] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933799] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933865] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933871] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933872] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933875] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933877] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933881] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933883] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933884] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933911] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.933912] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.936800] Bluetooth: Core ver 2.16****[ 17.936815] NET: Registered protocol family 31****[ 17.936816] Bluetooth: HCI device and connection manager initialized****
[ 17.936818] Bluetooth: HCI socket layer initialized****[ 17.936819] Bluetooth: L2CAP socket layer initialized****[ 17.936870] Bluetooth: SCO socket layer initialized****[ 17.937074] Bluetooth: Generic Bluetooth USB driver ver 0.6****[ 17.937171] usbcore: registered new interface driver btusb****[ 17.945312] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.945316] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.945318] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.956431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.956451] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.956453] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.956959] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.964438] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.976430] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.988023] [drm:ironlake_dp_detect], DPCD: 0000****[ 17.988026] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 17.988030] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.988032] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.988537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.000416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.012408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.023900] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.023905] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.023955] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.023960] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.035069] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.035072] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.035073] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.046272] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.046290] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.046292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.164376] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.282389] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.282393] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282394] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.282396] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.282400] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.282403] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.282405] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.282413] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.282445] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.282447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.282953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.288254] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.296241] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.303737] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.303744] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.303752] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.303756] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.304262] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.312236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.320229] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.327722] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.327728] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.327786] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.327791] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.328297] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.336218] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.344213] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.351710] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.351716] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.351725] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.351729] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.352236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.360206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.368199] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.375693] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.375700] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.375769] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375783] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375787] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375788] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375790] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375792] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375793] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375795] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375796] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375797] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375812] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.375814] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.386924] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.386927] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.386928] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.398015] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.398029] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.398031] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.398535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.404169] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.412168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.419658] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.419665] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.419673] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.419676] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.420183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.428147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.436142] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.443634] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.443638] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.443691] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.443694] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.454886] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.454892] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.454894] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.466030] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.466056] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.466058] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.583871] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.701804] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.701807] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701808] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.701810] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701812] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.701814] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.701816] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.701819] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.701824] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.702251] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.702253] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.702759] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.707980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.715979] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.723467] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.723474] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.723482] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.723486] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.723993] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.731964] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.739961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.747453] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.747459] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.747506] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.747511] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.748019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.755952] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.763941] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.771433] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.771447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.771461] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.771462] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.771967] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.779930] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.787937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.795429] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.795436] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.796613] [drm:drm_mode_addfb], [FB:27]****[ 18.796653] [drm:drm_mode_setcrtc], [CRTC:3]****[ 18.796656] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3]****[ 18.796658] [drm:drm_crtc_helper_set_config], ****[ 18.796659] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27]#connectors=1 (x y) (0 0)****
[ 18.796664] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 18.798703] [drm:intel_pipe_set_base_atomic], Writing base 0036300000000000 0 0 4096****
[ 18.798706] [drm:intel_update_fbc], ****[ 18.808123] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 18.851392] [drm:intel_wait_for_vblank], vblank wait timed out****[ 18.856501] [drm:i915_getparam], Unknown parameter 16****[ 18.871060] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871064] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871068] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871069] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871072] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871074] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871076] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871077] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871079] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871080] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871084] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.871086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.882303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.882306] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.882308] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.893431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.893439] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.893441] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.893946] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.899856] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.907858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.919357] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.919363] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.919377] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.919381] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.919887] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.931836] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.939833] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.947323] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.947328] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.947347] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.947351] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.958432] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.958437] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.958438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.969573] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.969581] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.969583] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.088092] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.206008] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.206011] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206012] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.206015] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206017] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.206019] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.206021] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.206023] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.206035] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.206193] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.206195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.206701] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.211665] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.219668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.227151] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.227156] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.227170] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.227173] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.227679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.235642] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.243644] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.251133] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.251138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.251157] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.251161] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.251668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.259632] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.267631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.275196] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.275200] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.275207] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.275209] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.275716] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.283616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.291614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.299116] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.299124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.301832] [drm:intel_crtc_cursor_set], ****[ 19.375154] Bluetooth: RFCOMM TTY layer initialized****[ 19.375158] Bluetooth: RFCOMM socket layer initialized****[ 19.375160] Bluetooth: RFCOMM ver 1.11****[ 19.375983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3****[ 19.375984] Bluetooth: BNEP filters: protocol multicast****[ 19.404321] init: ssh main process (1294) terminated with status 255****
[ 19.628562] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628567] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628572] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628575] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628578] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628582] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628585] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628588] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628590] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628599] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.628601] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.639574] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.639579] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.639581] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.651063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.651075] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.651077] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.651584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.659374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.667380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.674869] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.674873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.674900] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.674902] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.675408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.683368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.691365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.698854] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.698857] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.698888] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.698890] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.710004] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.710009] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.710010] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.721134] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.721139] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.721141] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.838802] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.956581] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.956585] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956586] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.956589] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.956594] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.956597] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.956600] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.956609] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.956826] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.956828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.957334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.963200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.971193] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.978685] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.978692] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.978707] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.978711] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.979217] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.987183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.995177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.002672] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.002679] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 20.002698] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.002702] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.003210] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.011168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.019162] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.026656] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.026663] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.026677] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.026681] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.027189] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.035154] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.043138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.050642] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.050648] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.080980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.091113] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.099114] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.106606] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.107186] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.115097] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.127104] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.134592] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.135174] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.143081] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.151074] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.162571] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.303064] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 20.303111] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.303113] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.307990] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, FlowControl: Rx/Tx****
[ 20.308391] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready****[ 20.847217] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847222] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847226] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847228] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847230] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847234] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847235] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847237] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847239] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847240] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847245] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.847247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.858379] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.858382] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.858383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.869494] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.869503] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.869505] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.870009] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.874629] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.882627] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.890117] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.890124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.890139] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.890143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.890651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.898616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.906612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.914112] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.914115] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.914135] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.914138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.925263] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.925266] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.925267] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.936388] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.936394] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 20.936396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 21.054345] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 21.172343] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 21.172346] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172347] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 21.172349] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172352] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 21.172353] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 21.172355] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 21.172358] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 21.172367] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 21.172527] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.172529] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.173035] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.178444] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.186442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.193937] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.193943] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.193958] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.193962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.194469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.202427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.210424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.217900] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.217903] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.217933] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.217935] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.218440] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.226399] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.234408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.241904] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.241910] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.241925] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.241930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.242437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.250402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.258392] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.265889] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.265895] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.310406] [drm:i915_driver_open], ****[ 21.310638] [drm:i915_getparam], Unknown parameter 16****[ 22.145057] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0****
[ 22.308835] EXT4-fs (sdb1): re-mounted. Opts: commit=0****[ 22.602011] init: plymouth-stop pre-start process (2161) terminatedwith status 1****
[ 23.252862] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252866] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252870] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252871] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252876] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252878] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252880] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252881] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252882] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252887] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.252889] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.264062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.264065] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.264066] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.275207] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.275216] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.275218] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.275723] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.281128] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.289117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.296613] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.296619] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.296635] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.296639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.297147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.305115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.313112] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.320609] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.320615] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.320635] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.320639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.331753] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.331756] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.331757] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.342870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.342877] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.342879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 23.460856] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 23.578740] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 23.578743] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578745] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 23.578747] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578749] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 23.578751] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 23.578753] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 23.578755] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 23.578762] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.578924] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.578926] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.579431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.584931] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.592927] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.600416] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.600420] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.600446] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.600448] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.600953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.608916] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.616910] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.624403] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.624417] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.624436] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.624438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.624943] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.632899] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.640895] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.648387] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.648390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 23.648417] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.648419] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.648923] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.656886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.664892] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.672383] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.672390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 27.034272] eth0: no IPv6 routers present****[ 27.684552] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684556] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684560] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684561] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684564] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684566] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684568] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684570] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684571] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684572] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684578] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.684579] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.695743] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.695745] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.695746] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.706962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.706970] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.706972] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.707477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.714348] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.722368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.729836] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.729840] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.729872] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.729874] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.730380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.738334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.746362] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.753823] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.753827] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.753861] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.753864] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.765154] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.765161] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.765162] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.776296] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.776302] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 27.776304] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 27.894206] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.012130] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.012134] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012136] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.012140] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012142] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.012145] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.012148] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.012151] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.012158] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.012160] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.012161] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.012163] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 28.023288] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 28.023793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.030161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.038157] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.045649] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.045655] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 28.056760] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 28.174011] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.174013] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 28.174519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.182065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.190061] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.197550] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.197556] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 28.198064] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.206051] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.214046] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.221538] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.221544] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 28.221777] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.221779] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.222284] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.230041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.238038] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.245529] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.245536] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.245551] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.245555] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.246063] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.254027] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.262022] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.269515] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.269522] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.269541] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.269546] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.270052] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.278011] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.286007] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.293500] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.293507] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.293521] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.293525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.294032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.301998] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.309991] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.317484] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.317491] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.449308] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449313] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449316] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449318] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449320] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449323] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449324] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449326] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449328] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449329] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449333] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.449335] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.460508] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.460512] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.460514] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.471685] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.471694] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.471696] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.472202] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.477955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.485886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.493376] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.493383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.493398] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.493402] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.493909] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.501872] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.509865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.517358] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.517365] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.517385] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.517389] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.528604] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.528608] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.528609] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.539821] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.539844] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.539846] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 28.657898] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.775791] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.775794] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775795] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.775798] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775800] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.775802] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.775804] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.775806] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.775817] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.775975] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.775977] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.776483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.781695] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.793689] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.801185] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.801192] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.801207] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.801211] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.801718] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.813680] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.821672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.829165] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.829171] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.829191] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.829195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.829702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.837666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.845660] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.853151] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.853157] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.853172] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.853176] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.853684] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.861648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.869636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.877137] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.877143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.896276] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896280] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896284] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896286] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896288] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896291] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896295] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896296] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896298] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896302] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.896303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.907396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.907398] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.907400] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.918540] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.918548] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.918550] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.919056] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.925603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.933599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.941091] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.941098] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.941112] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.941116] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.941624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.949589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.957582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.965079] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.965086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.965106] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.965110] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.976237] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.976241] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.976243] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.987399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.987404] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.987406] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 29.105498] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 29.223447] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 29.223449] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223451] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 29.223453] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223455] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 29.223457] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 29.223459] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 29.223461] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 29.223469] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 29.223624] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.223625] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.224130] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.229416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.237407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.244905] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.244911] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.244926] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.244930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.245437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.253402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.261397] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.268890] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.268896] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.268916] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.268920] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.269427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.277383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.285385] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.292875] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.292881] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 29.292896] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.292900] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.293407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.301372] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.309366] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.316863] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.316870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 30.783932] eth1: no IPv6 routers present****[ 38.259281] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 38.259287] [drm:intel_crt_detect], CRT not detected via hotplug****[ 38.259291] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 38.270384] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 38.270890] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.275767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.283760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.291253] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.291259] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 38.302369] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 38.419728] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 38.419730] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 38.420234] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.427672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.435667] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.443158] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.443164] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 38.443673] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.451655] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.459651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.467143] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.467149] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 62.272823] [drm:intel_crtc_cursor_set], ****[ 62.272826] [drm:intel_crtc_cursor_set], cursor off****[ 62.272850] [drm:intel_crtc_cursor_set], ****[ 69.601430] [drm:intel_crtc_cursor_set], ****[ 69.601433] [drm:intel_crtc_cursor_set], cursor off****[ 95.962368] [drm:intel_crtc_cursor_set], ****[ 99.190494] [drm:intel_crtc_cursor_set], ****[ 99.190498] [drm:intel_crtc_cursor_set], cursor off****[ 101.207418] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207425] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207430] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207434] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207444] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207450] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207453] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207465] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.207468] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.218731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.218740] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.218745] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.229913] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.229921] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.229923] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.230428] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.236486] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.244496] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.251966] [drm:ironlake_dp_detect], DPCD: 0000****[ 101.251973] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 101.251987] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.251991] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.252499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.260459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.268473] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.275945] [drm:ironlake_dp_detect], DPCD: 0000****[ 101.275952] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 101.275972] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 101.275976] [drm:drm_helper_probe_single_connector_modes],2,921 lines not shown · raw message
Quoted 10 lines
6 lines not shown · raw message
4 lines not shown · raw message
7 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Quoted 7 lines · Daniel Vetter
Hi all,
To debug modeset issues we usually need a full dmesg with drm.debug=0xe added to the kernel command line. Can you please attach that?
Also, Rodrigo is trying to improve our hdmi/tv support, maybe he's got an idea, cc'ed.
Meh, forgotten to put him actually on cc ;-)
Quoted 10,649 lines
Yours, Daniel
Quoted 10,640 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
thank you,
alfonsoQuoted 10,600 lines · Angela Schmid
Hello****
** **
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.** **
Nvidia noveau with GTX275 (using yellow
DVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.****** **
xorg.conf is empty and use the following command:****
** **
xrandr --newmode "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync****
xrandr --addmode HDMI3 "1920x1080i"****
xrandr --output HDMI3 --mode "1920x1080i"****
** **
The desktop is half and moved to the left. The television is flickering.** **
I tried several other modelines, which work for the noveau driver, but not for the intel driver.****
The highest resolution possible is "1280x720@50hz" 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync****** **
When using only HDMI grub2 will start in 1080i but xorg is not visible afterwards. ****
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr –output VGA1 –off****
** **
Is interlace working with the intel driver ? Any help appreciated.****
Will there be soon support (otherwise I have to buy a NV adapter) ?****
** **
Cheers****
Angela****
** **
System environment:
-- chipset: Sandy Bridge (2600k)
-- system architecture: 64-bit
-- xf86-video-intel: ppa/xorg-edgers: xserver-xorg-video-intel 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric****-- xserver: 1.11.2.902 (1.11.3 RC2)(10 December 2011...) -- mesa: 3.0 Mesa 8.0-devel****
libegl1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libegl1-mesa-drivers/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-dri/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-glx/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglapi-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglu1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libopenvg1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
mesa-utils/oneiric uptodate 8.0.1+git20110129+d8f7d6b-0ubuntu2 -- libdrm:****
libdrm-intel1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-nouveau1a/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-radeon1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm2/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric -- kernel: 3.0.0-14-generic
-- Linux distribution: Ubuntu
-- Machine or mobo model: Asus P8Z68-V PRO -- Display connector: HDMIReproducing steps:
Additional info:****
Intel****
Xrandr****
dmesg****
Xorg.0.log****
Noveau****
Xrandr****
Xorg.0.log****
** **
** **
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192****
VGA1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x41**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: ****HDMI1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x42**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x43**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off auto on ****HDMI2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x44**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
HDMI3 connected 1920x1080+0+0 (
0xb8) normal (normal left inverted right x axis y axis) 640mm x 360mm****Identifier: 0x45**** Timestamp: 102654**** Subpixel: unknown**** Gamma: 1.0:1.0:1.0**** Brightness: 1.0**** Clones: **** CRTC: 0**** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** EDID:**** 00ffffffffffff00410c000001010101**** 00000103804024780ae692a3544a9926**** 0f4a4c21080001010101010101010101**** 010101010101011d80d0721c1620102c**** 258080682100009e011d8018711c1620**** 582c250080682100009e000000fc0050**** 68696c697073204654560a20000000fd**** 00303e0f3209000a20202020202001e3**** 020324f04b0103040506071213141516**** 29091f07150750190786830100006503**** 0c002000011d00bc52d01e20b8285540**** 80682100001e011d007251d01e206e28**** 550080682100001e8c0ad09020403120**** 0c4055008068210000188c0ad08a20e0**** 2d10103e960080682100001800000000**** 0000000000000000000000000000002a**** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
1024x768 (
0x48) 65.0MHz -HSync -VSync****h: width 1024 start 1048 end 1184 total 1344 skew 0 clock48.4KHz****
v: height 768 start 771 end 777 total 806 clock
60.0Hz****800x600 (
0x49) 40.0MHz +HSync +VSync****h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz****v: height 600 start 601 end 605 total 628 clock
60.3Hz****640x480 (
0x4a) 25.2MHz -HSync -VSync****h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz****v: height 480 start 490 end 492 total 525 clock
60.0Hz****194144_1920x1080ix0.0 (
0xb8) 74.2MHz +HSync +VSync Interlace *current*
***h: width 1920 start 2448 end 2492 total 2640 skew 0 clock28.1KHz****
v: height 1080 start 1084 end 1094 total 1125 clock25.0Hz****
DP2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x46**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP3 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x47**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
** **
** **
[ 0.000000] Initializing cgroup subsys cpuset****[ 0.000000] Initializing cgroup subsys cpu****[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gccversion 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)****
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] KERNEL supported cpus:****[ 0.000000] Intel GenuineIntel****[ 0.000000] AMD AuthenticAMD****[ 0.000000] Centaur CentaurHauls****[ 0.000000] BIOS-provided physical RAM map:****[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)****
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)****
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)****
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)****
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)****
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000be5cc000 (usable)****
[ 0.000000] BIOS-e820: 00000000be5cc000 - 00000000be628000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000be628000 - 00000000beb36000 (reserved)****
[ 0.000000] BIOS-e820: 00000000beb36000 - 00000000beb39000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beb39000 - 00000000bed9f000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bed9f000 - 00000000bedb0000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedb0000 - 00000000bedc7000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedc7000 - 00000000bedc9000 (usable)****
[ 0.000000] BIOS-e820: 00000000bedc9000 - 00000000bedca000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedca000 - 00000000bedd2000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedd2000 - 00000000beddc000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beddc000 - 00000000bee38000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bee38000 - 00000000bee7b000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bee7b000 - 00000000bf000000 (usable)****
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved)****
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)****
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)****
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)****
[ 0.000000] NX (Execute Disable) protection: active****[ 0.000000] DMI 2.6 present.****[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO,BIOS 1101 11/23/2011****
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000(usable) ==> (reserved)****
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000(usable)****
[ 0.000000] No AGP bridge found****[ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000****[ 0.000000] MTRR default type: uncachable****[ 0.000000] MTRR fixed ranges enabled:****[ 0.000000] 00000-9FFFF write-back****[ 0.000000] A0000-BFFFF uncachable****[ 0.000000] C0000-D3FFF write-protect****[ 0.000000] D4000-E7FFF uncachable****[ 0.000000] E8000-FFFFF write-protect****[ 0.000000] MTRR variable ranges enabled:****[ 0.000000] 0 base 000000000 mask E00000000 write-back****[ 0.000000] 1 base 200000000 mask FC0000000 write-back****[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable****[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable****[ 0.000000] 4 base 22FE00000 mask FFFE00000 uncachable****[ 0.000000] 5 base 230000000 mask FF0000000 uncachable****[ 0.000000] 6 disabled****[ 0.000000] 7 disabled****[ 0.000000] 8 disabled****[ 0.000000] 9 disabled****[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new0x7010600070106****
[ 0.000000] original variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB****[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 3GB, range: 1GB, type UC****[ 0.000000] reg 4, base: 8958MB, range: 2MB, type UC****[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC****[ 0.000000] total RAM covered: 7926M****[ 0.000000] Found optimal setting for mtrr clean up****[ 0.000000] gran_size: 64K chunk_size: 16M
num_reg: 7 lose cover RAM: 0G****[ 0.000000] New variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB****[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB****[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB****[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB****[ 0.000000] reg 6, base: 8958MB, range: 2MB, type UC****[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000(usable) ==> (reserved)****
[ 0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000****[ 0.000000] found SMP MP-table at [ffff8800000fcf10] fcf10****[ 0.000000] initial memory mapped : 0 - 20000000****[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size20480****
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf000000****[ 0.000000] 0000000000 - 00bf000000 page 2M****[ 0.000000] kernel direct mapping tables up to bf000000 @1fffc000-20000000****
[ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000****[ 0.000000] 0100000000 - 022fe00000 page 2M****[ 0.000000] kernel direct mapping tables up to 22fe00000 @beff6000-bf000000****
[ 0.000000] RAMDISK: 358ee000 - 36c6f000****[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)****[ 0.000000] ACPI: XSDT 00000000be61d068 0004C (v01 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: FACP 00000000be627250 000F4 (v04 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: DSDT 00000000be61d140 0A10B (v02 ALASKA A M I00000000 INTL 20051117)****
[ 0.000000] ACPI: FACS 00000000bedd3f80 00040****[ 0.000000] ACPI: APIC 00000000be627348 00092 (v03 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: SSDT 00000000be6273e0 001D6 (v01 AMICPU PROC00000001 MSFT 03000001)****
[ 0.000000] ACPI: MCFG 00000000be6275b8 0003C (v01 ALASKA A M I01072009 MSFT 00000097)****
[ 0.000000] ACPI: HPET 00000000be6275f8 00038 (v01 ALASKA A M I01072009 AMI. 00000004)****
[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] No NUMA configuration found****[ 0.000000] Faking a node at 0000000000000000-000000022fe00000****[ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000****[ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff]****[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->[ffff880227800000-ffff88022e5fffff] on node 0****
[ 0.000000] Zone PFN ranges:****[ 0.000000] DMA 0x00000010 -> 0x00001000****[ 0.000000] DMA32 0x00001000 -> 0x00100000****[ 0.000000] Normal 0x00100000 -> 0x0022fe00****[ 0.000000] Movable zone start PFN for each node****[ 0.000000] early_node_map[7] active PFN ranges****[ 0.000000] 0: 0x00000010 -> 0x0000009b****[ 0.000000] 0: 0x00000100 -> 0x00020000****[ 0.000000] 0: 0x00020200 -> 0x00040000****[ 0.000000] 0: 0x00040200 -> 0x000be5cc****[ 0.000000] 0: 0x000bedc7 -> 0x000bedc9****[ 0.000000] 0: 0x000bee7b -> 0x000bf000****[ 0.000000] 0: 0x00100000 -> 0x0022fe00****[ 0.000000] On node 0 totalpages: 2023646****[ 0.000000] DMA zone: 56 pages used for memmap****[ 0.000000] DMA zone: 5 pages reserved****[ 0.000000] DMA zone: 3918 pages, LIFO batch:0****[ 0.000000] DMA32 zone: 14280 pages used for memmap****[ 0.000000] DMA32 zone: 760715 pages, LIFO batch:31****[ 0.000000] Normal zone: 17017 pages used for memmap****[ 0.000000] Normal zone: 1227655 pages, LIFO batch:31****[ 0.000000] ACPI: PM-Timer IO Port: 0x408****[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)****[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])****[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])****[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI0-23****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)****
[ 0.000000] ACPI: IRQ0 used by override.****[ 0.000000] ACPI: IRQ2 used by override.****[ 0.000000] ACPI: IRQ9 used by override.****[ 0.000000] Using ACPI (MADT) for SMP configuration information****[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000****[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs****[ 0.000000] nr_irqs_gsi: 40****[ 0.000000] PM: Registered nosave memory: 000000000009b000 -000000000009c000****
[ 0.000000] PM: Registered nosave memory: 000000000009c000 -00000000000a0000****
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -00000000000e0000****
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -0000000000100000****
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -0000000020200000****
[ 0.000000] PM: Registered nosave memory: 0000000040000000 -0000000040200000****
[ 0.000000] PM: Registered nosave memory: 00000000be5cc000 -00000000be628000****
[ 0.000000] PM: Registered nosave memory: 00000000be628000 -00000000beb36000****
[ 0.000000] PM: Registered nosave memory: 00000000beb36000 -00000000beb39000****
[ 0.000000] PM: Registered nosave memory: 00000000beb39000 -00000000bed9f000****
[ 0.000000] PM: Registered nosave memory: 00000000bed9f000 -00000000bedb0000****
[ 0.000000] PM: Registered nosave memory: 00000000bedb0000 -00000000bedc7000****
[ 0.000000] PM: Registered nosave memory: 00000000bedc9000 -00000000bedca000****
[ 0.000000] PM: Registered nosave memory: 00000000bedca000 -00000000bedd2000****
[ 0.000000] PM: Registered nosave memory: 00000000bedd2000 -00000000beddc000****
[ 0.000000] PM: Registered nosave memory: 00000000beddc000 -00000000bee38000****
[ 0.000000] PM: Registered nosave memory: 00000000bee38000 -00000000bee7b000****
[ 0.000000] PM: Registered nosave memory: 00000000bf000000 -00000000bf800000****
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 -00000000cfa00000****
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 -00000000fed1c000****
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -00000000fed20000****
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -00000000ff000000****
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -0000000100000000****
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap:cfa00000:2f31c000)****
[ 0.000000] Booting paravirtualized kernel on bare hardware****[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8nr_node_ids:1****
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79616r8192 d22784 u262144****
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152****[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 ****[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 1992288****
[ 0.000000] Policy zone: Normal****[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)****[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340****[ 0.000000] Checking aperture...****[ 0.000000] No AGP bridge found****[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area****[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -bailing!****
[ 0.000000] Memory: 7881468k/9172992k available (6109k kernel code,1078408k absent, 213116k reserved, 4876k data, 984k init)****
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,CPUs=8, Nodes=1****
[ 0.000000] Hierarchical RCU implementation.****[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.****
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16****[ 0.000000] Extended CMOS year: 2000****[ 0.000000] Console: colour dummy device 80x25****[ 0.000000] console [tty0] enabled****[ 0.000000] allocated 65011712 bytes of page_cgroup****[ 0.000000] please try 'cgroup_disable=memory' option if you don't wantmemory cgroups****
[ 0.000000] hpet clockevent registered****[ 0.000000] Fast TSC calibration using PIT****[ 0.004000] Detected 3410.641 MHz processor.****[ 0.000002] Calibrating delay loop (skipped), value calculated usingtimer frequency.. 6821.28 BogoMIPS (lpj=13642564)****
[ 0.000006] pid_max: default: 32768 minimum: 301****[ 0.000023] Security Framework initialized****[ 0.000032] AppArmor: AppArmor initialized****[ 0.000034] Yama: becoming mindful.****[ 0.000562] Dentry cache hash table entries: 1048576 (order: 11,8388608 bytes)****
[ 0.001795] Inode-cache hash table entries: 524288 (order: 10, 4194304bytes)****
[ 0.002278] Mount-cache hash table entries: 256****[ 0.002349] Initializing cgroup subsys cpuacct****[ 0.002353] Initializing cgroup subsys memory****[ 0.002358] Initializing cgroup subsys devices****[ 0.002360] Initializing cgroup subsys freezer****[ 0.002362] Initializing cgroup subsys net_cls****[ 0.002364] Initializing cgroup subsys blkio****[ 0.002369] Initializing cgroup subsys perf_event****[ 0.002387] CPU: Physical Processor ID: 0****[ 0.002389] CPU: Processor Core ID: 0****[ 0.002394] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'****[ 0.002394] ENERGY_PERF_BIAS: View and update withx86_energy_perf_policy(8)****
[ 0.002399] mce: CPU supports 9 MCE banks****[ 0.002409] CPU0: Thermal monitoring enabled (TM1)****[ 0.002417] using mwait in idle threads.****[ 0.004052] ACPI: Core revision 20110413****[ 0.219039] ftrace: allocating 25647 entries in 101 pages****[ 0.225855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1****[ 0.265509] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07****
[ 0.372139] Performance Events: PEBS fmt1+, SandyBridge events, IntelPMU driver.****
[ 0.372145] ... version: 3****[ 0.372146] ... bit width: 48****[ 0.372148] ... generic registers: 4****[ 0.372149] ... value mask: 0000ffffffffffff****[ 0.372151] ... max period: 000000007fffffff****[ 0.372153] ... fixed-purpose events: 3****[ 0.372154] ... event mask: 000000070000000f****[ 0.372410] Booting Node 0, Processors #1****[ 0.372412] smpboot cpu 1: start_ip = 96000****[ 0.480208] #2****[ 0.480211] smpboot cpu 2: start_ip = 96000****[ 0.588103] #3****[ 0.588106] smpboot cpu 3: start_ip = 96000****[ 0.696095] #4****[ 0.696098] smpboot cpu 4: start_ip = 96000****[ 0.803954] #5****[ 0.803957] smpboot cpu 5: start_ip = 96000****[ 0.911949] #6****[ 0.911951] smpboot cpu 6: start_ip = 96000****[ 1.019844] #7 Ok.****[ 1.019848] smpboot cpu 7: start_ip = 96000****[ 1.127692] Brought up 8 CPUs****[ 1.127696] Total of 8 processors activated (54575.83 BogoMIPS).****[ 1.132439] devtmpfs: initialized****[ 1.132522] PM: Registering ACPI NVS region at be5cc000 (376832 bytes)****
[ 1.132528] PM: Registering ACPI NVS region at beb36000 (12288 bytes)****
[ 1.132531] PM: Registering ACPI NVS region at bed9f000 (69632 bytes)****
[ 1.132533] PM: Registering ACPI NVS region at bedc9000 (4096 bytes)****
[ 1.132535] PM: Registering ACPI NVS region at bedd2000 (40960 bytes)****
[ 1.132538] PM: Registering ACPI NVS region at bee38000 (274432 bytes)****
[ 1.133403] print_constraints: dummy: ****[ 1.133428] Time: 18:40:04 Date: 01/17/12****[ 1.133450] NET: Registered protocol family 16****[ 1.133513] Trying to unpack rootfs image as initramfs...****[ 1.133517] ACPI: bus type pci registered****[ 1.133553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.133557] PCI: not using MMCONFIG****[ 1.133558] PCI: Using configuration type 1 for base access****[ 1.133982] bio: create slab <bio-0> at 0****[ 1.134828] ACPI: EC: Look up EC in DSDT****[ 1.135589] ACPI: Executed 1 blocks of module-level executable AML code****
[ 1.137110] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND(20110413/psargs-359)****
[ 1.137116] ACPI Exception: AE_NOT_FOUND, Could not execute argumentsfor [RAMW] (Region) (20110413/nsinit-349)****
[ 1.137292] ACPI: SSDT 00000000bedd2818 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137570] ACPI: Dynamic OEM Table Load:****[ 1.137573] ACPI: SSDT (null) 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137601] ACPI: SSDT 00000000bedd9a18 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.137820] ACPI: Dynamic OEM Table Load:****[ 1.137822] ACPI: SSDT (null) 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.138317] ACPI: Interpreter enabled****[ 1.138320] ACPI: (supports S0 S1 S3 S4 S5)****[ 1.138333] ACPI: Using IOAPIC for interrupt routing****[ 1.138348] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.138384] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved inACPI motherboard resources****
[ 1.149715] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored****[ 1.152841] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =0x62****
[ 1.152951] ACPI: No dock devices found.****[ 1.152954] HEST: Table not found.****[ 1.152956] PCI: Using host bridge windows from ACPI; if necessary, use"pci=nocrs" and report a bug****
[ 1.153066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])****[ 1.153184] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]****
[ 1.153187] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]****
[ 1.153189] pci_root PNP0A08:00: host bridge window [mem0x000a0000-0x000bffff]****
[ 1.153192] pci_root PNP0A08:00: host bridge window [mem0x000c8000-0x000dffff]****
[ 1.153195] pci_root PNP0A08:00: host bridge window [mem0xcfa00000-0xffffffff]****
[ 1.153199] pci_root PNP0A08:00: address space collision: host bridgewindow [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]****
[ 1.153208] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600****[ 1.153232] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604****[ 1.153249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold****[ 1.153251] pci 0000:00:01.0: PME# disabled****[ 1.153265] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300****[ 1.153272] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]****
[ 1.153276] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bitpref]****
[ 1.153280] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]****[ 1.153320] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780****[ 1.153341] pci 0000:00:16.0: reg 10: [mem 0xfbd29000-0xfbd2900f 64bit]****
[ 1.153398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold****[ 1.153401] pci 0000:00:16.0: PME# disabled****[ 1.153428] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200****[ 1.153444] pci 0000:00:19.0: reg 10: [mem 0xfbd00000-0xfbd1ffff]****[ 1.153452] pci 0000:00:19.0: reg 14: [mem 0xfbd28000-0xfbd28fff]****[ 1.153460] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]****[ 1.153505] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold****[ 1.153508] pci 0000:00:19.0: PME# disabled****[ 1.153530] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03****[ 1.153549] pci 0000:00:1a.0: reg 10: [mem 0xfbd27000-0xfbd273ff]****[ 1.153617] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold****[ 1.153621] pci 0000:00:1a.0: PME# disabled****[ 1.153641] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403****[ 1.153655] pci 0000:00:1b.0: reg 10: [mem 0xfbd20000-0xfbd23fff 64bit]****
[ 1.153704] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold****[ 1.153707] pci 0000:00:1b.0: PME# disabled****[ 1.153726] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604****[ 1.153784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold****[ 1.153787] pci 0000:00:1c.0: PME# disabled****[ 1.153807] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604****[ 1.153865] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold****[ 1.153869] pci 0000:00:1c.1: PME# disabled****[ 1.153889] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604****[ 1.153946] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold****[ 1.153950] pci 0000:00:1c.2: PME# disabled****[ 1.153970] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604****[ 1.154027] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold****[ 1.154031] pci 0000:00:1c.3: PME# disabled****[ 1.154051] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604****[ 1.154108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold****[ 1.154111] pci 0000:00:1c.4: PME# disabled****[ 1.154132] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604****[ 1.154189] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold****[ 1.154193] pci 0000:00:1c.6: PME# disabled****[ 1.154213] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604****[ 1.154270] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold****[ 1.154274] pci 0000:00:1c.7: PME# disabled****[ 1.154298] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03****[ 1.154318] pci 0000:00:1d.0: reg 10: [mem 0xfbd26000-0xfbd263ff]****[ 1.154385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold****[ 1.154389] pci 0000:00:1d.0: PME# disabled****[ 1.154412] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601****[ 1.154519] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106****[ 1.154535] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]****[ 1.154542] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]****[ 1.154549] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]****[ 1.154556] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]****[ 1.154563] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]****[ 1.154570] pci 0000:00:1f.2: reg 24: [mem 0xfbd25000-0xfbd257ff]****[ 1.154600] pci 0000:00:1f.2: PME# supported from D3hot****[ 1.154603] pci 0000:00:1f.2: PME# disabled****[ 1.154618] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05****[ 1.154631] pci 0000:00:1f.3: reg 10: [mem 0xfbd24000-0xfbd240ff 64bit]****
[ 1.154651] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]****[ 1.154687] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.154690] pci 0000:00:01.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154693] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154695] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154736] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.154740] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154744] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154750] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154816] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.154844] pci 0000:03:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]****
[ 1.154964] pci 0000:03:00.0: PME# supported from D3hot D3cold****[ 1.154970] pci 0000:03:00.0: PME# disabled****[ 1.159621] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.159625] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159629] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.159635] pci 0000:00:1c.1: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159676] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.159680] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159684] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.159690] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159750] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101****[ 1.159783] pci 0000:05:00.0: reg 10: [io 0xe040-0xe047]****[ 1.159799] pci 0000:05:00.0: reg 14: [io 0xe030-0xe033]****[ 1.159815] pci 0000:05:00.0: reg 18: [io 0xe020-0xe027]****[ 1.159830] pci 0000:05:00.0: reg 1c: [io 0xe010-0xe013]****[ 1.159846] pci 0000:05:00.0: reg 20: [io 0xe000-0xe00f]****[ 1.159861] pci 0000:05:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]****[ 1.159877] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]****
[ 1.159914] pci 0000:05:00.0: PME# supported from D3hot****[ 1.159919] pci 0000:05:00.0: PME# disabled****[ 1.167614] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.167618] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.167622] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.167627] pci 0000:00:1c.3: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.167695] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.167723] pci 0000:06:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]****
[ 1.167844] pci 0000:06:00.0: PME# supported from D3hot D3cold****[ 1.167850] pci 0000:06:00.0: PME# disabled****[ 1.175609] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.175615] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000](disabled)****
[ 1.175619] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.175625] pci 0000:00:1c.4: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175682] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604****[ 1.175785] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractivedecode)****
[ 1.175790] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.175794] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.175799] pci 0000:00:1c.6: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175801] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.175802] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.175804] pci 0000:00:1c.6: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.175805] pci 0000:00:1c.6: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.175864] pci 0000:08:01.0: [10ec:8139] type 0 class 0x000200****[ 1.175895] pci 0000:08:01.0: reg 10: [io 0xd000-0xd0ff]****[ 1.175912] pci 0000:08:01.0: reg 14: [mem 0xfb901000-0xfb9010ff]****[ 1.176022] pci 0000:08:01.0: supports D1 D2****[ 1.176023] pci 0000:08:01.0: PME# supported from D1 D2 D3hot D3cold****
[ 1.176029] pci 0000:08:01.0: PME# disabled****[ 1.176058] pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00****[ 1.176089] pci 0000:08:02.0: reg 10: [mem 0xfb900000-0xfb9007ff]****[ 1.176106] pci 0000:08:02.0: reg 14: [io 0xd100-0xd17f]****[ 1.176218] pci 0000:08:02.0: supports D2****[ 1.176219] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold****[ 1.176225] pci 0000:08:02.0: PME# disabled****[ 1.176300] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractivedecode)****
[ 1.176311] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.176316] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.176326] pci 0000:07:00.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.176327] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff](subtractive decode)****
[ 1.176328] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff] (subtractive decode)****
[ 1.176330] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176331] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176333] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.176334] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.176336] pci 0000:07:00.0: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.176337] pci 0000:07:00.0: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.176408] pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106****[ 1.176425] pci 0000:09:00.0: reg 10: [io 0xc040-0xc047]****[ 1.176437] pci 0000:09:00.0: reg 14: [io 0xc030-0xc033]****[ 1.176450] pci 0000:09:00.0: reg 18: [io 0xc020-0xc027]****[ 1.176462] pci 0000:09:00.0: reg 1c: [io 0xc010-0xc013]****[ 1.176474] pci 0000:09:00.0: reg 20: [io 0xc000-0xc00f]****[ 1.176486] pci 0000:09:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]****[ 1.176499] pci 0000:09:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]****
[ 1.176533] pci 0000:09:00.0: PME# supported from D3hot****[ 1.176538] pci 0000:09:00.0: PME# disabled****[ 1.183602] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.183607] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.183611] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.183616] pci 0000:00:1c.7: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.183652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]****[ 1.183726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]****
[ 1.183744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]****
[ 1.183759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]****
[ 1.183774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]****
[ 1.183788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]****
[ 1.183814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]****
[ 1.183829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]****
[ 1.183845] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX6.BR24._PRT]****
[ 1.183873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]****
[ 1.183948] pci0000:00: Requesting ACPI _OSC control (0x1d)****[ 1.184064] pci0000:00: ACPI _OSC control (0x1c) granted****[ 1.186647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 1214 15)****
[ 1.186678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 1214 15)****
[ 1.186707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 1415)****
[ 1.186735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 1415)****
[ 1.186762] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 1415)****
[ 1.186789] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 1214 15)****
[ 1.186817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 1214 15)****
[ 1.186845] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 1214 15)****
[ 1.186901] vgaarb: device added:PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none****
[ 1.186908] vgaarb: loaded****[ 1.186909] vgaarb: bridge control possible 0000:00:02.0****[ 1.187004] SCSI subsystem initialized****[ 1.187042] libata version 3.00 loaded.****[ 1.187066] usbcore: registered new interface driver usbfs****[ 1.187073] usbcore: registered new interface driver hub****[ 1.187088] usbcore: registered new device driver usb****[ 1.187132] PCI: Using ACPI for IRQ routing****[ 1.188450] PCI: pci_cache_line_size set to 64 bytes****[ 1.188541] reserve RAM buffer: 000000000009b400 - 000000000009ffff ****
[ 1.188543] reserve RAM buffer: 00000000be5cc000 - 00000000bfffffff ****
[ 1.188545] reserve RAM buffer: 00000000bedc9000 - 00000000bfffffff ****
[ 1.188547] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff ****
[ 1.188548] reserve RAM buffer: 000000022fe00000 - 000000022fffffff ****
[ 1.188604] NetLabel: Initializing****[ 1.188606] NetLabel: domain hash size = 128****[ 1.188607] NetLabel: protocols = UNLABELED CIPSOv4****[ 1.188614] NetLabel: unlabeled traffic allowed by default****[ 1.188641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0****[ 1.188646] hpet0: 8 comparators, 64-bit 14.318180 MHz counter****[ 1.190658] Switching to clocksource hpet****[ 1.191590] Switched to NOHz mode on CPU #0****[ 1.191647] Switched to NOHz mode on CPU #4****[ 1.191650] Switched to NOHz mode on CPU #7****[ 1.191652] Switched to NOHz mode on CPU #2****[ 1.191679] Switched to NOHz mode on CPU #1****[ 1.191682] Switched to NOHz mode on CPU #6****[ 1.191714] Switched to NOHz mode on CPU #5****[ 1.191717] Switched to NOHz mode on CPU #3****[ 1.193951] AppArmor: AppArmor Filesystem Enabled****[ 1.193965] pnp: PnP ACPI init****[ 1.193973] ACPI: bus type pnp registered****[ 1.194061] pnp 00:00: [bus 00-ff]****[ 1.194063] pnp 00:00: [io 0x0cf8-0x0cff]****[ 1.194064] pnp 00:00: [io 0x0000-0x0cf7 window]****[ 1.194065] pnp 00:00: [io 0x0d00-0xffff window]****[ 1.194066] pnp 00:00: [mem 0x000a0000-0x000bffff window]****[ 1.194068] pnp 00:00: [mem 0x000c8000-0x000dffff window]****[ 1.194069] pnp 00:00: [mem 0xcfa00000-0xffffffff window]****[ 1.194070] pnp 00:00: [mem 0x00000000 window]****[ 1.194109] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03(active)****
[ 1.194141] pnp 00:01: [mem 0xfed10000-0xfed19fff]****[ 1.194142] pnp 00:01: [mem 0xe0000000-0xe3ffffff]****[ 1.194143] pnp 00:01: [mem 0xfed90000-0xfed93fff]****[ 1.194144] pnp 00:01: [mem 0xfed20000-0xfed3ffff]****[ 1.194145] pnp 00:01: [mem 0xfee00000-0xfee0ffff]****[ 1.194170] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved****
[ 1.194173] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved****
[ 1.194176] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved****
[ 1.194178] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved****
[ 1.194181] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved****
[ 1.194184] system 00:01: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194220] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194221] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194222] pnp 00:02: [io 0x0290-0x029f]****[ 1.194223] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194244] system 00:02: [io 0x0290-0x029f] has been reserved****[ 1.194247] system 00:02: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194254] pnp 00:03: [dma 4]****[ 1.194255] pnp 00:03: [io 0x0000-0x000f]****[ 1.194256] pnp 00:03: [io 0x0081-0x0083]****[ 1.194257] pnp 00:03: [io 0x0087]****[ 1.194258] pnp 00:03: [io 0x0089-0x008b]****[ 1.194259] pnp 00:03: [io 0x008f]****[ 1.194260] pnp 00:03: [io 0x00c0-0x00df]****[ 1.194273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)****
[ 1.194278] pnp 00:04: [io 0x0070-0x0071]****[ 1.194286] pnp 00:04: [irq 8]****[ 1.194298] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)****
[ 1.194302] pnp 00:05: [io 0x0061]****[ 1.194314] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)****
[ 1.194323] pnp 00:06: [io 0x0010-0x001f]****[ 1.194324] pnp 00:06: [io 0x0022-0x003f]****[ 1.194325] pnp 00:06: [io 0x0044-0x005f]****[ 1.194326] pnp 00:06: [io 0x0063]****[ 1.194327] pnp 00:06: [io 0x0065]****[ 1.194328] pnp 00:06: [io 0x0067-0x006f]****[ 1.194328] pnp 00:06: [io 0x0072-0x007f]****[ 1.194329] pnp 00:06: [io 0x0080]****[ 1.194331] pnp 00:06: [io 0x0084-0x0086]****[ 1.194332] pnp 00:06: [io 0x0088]****[ 1.194333] pnp 00:06: [io 0x008c-0x008e]****[ 1.194334] pnp 00:06: [io 0x0090-0x009f]****[ 1.194335] pnp 00:06: [io 0x00a2-0x00bf]****[ 1.194336] pnp 00:06: [io 0x00e0-0x00ef]****[ 1.194337] pnp 00:06: [io 0x04d0-0x04d1]****[ 1.194362] system 00:06: [io 0x04d0-0x04d1] has been reserved****[ 1.194365] system 00:06: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194369] pnp 00:07: [io 0x00f0-0x00ff]****[ 1.194373] pnp 00:07: [irq 13]****[ 1.194384] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)****
[ 1.194544] pnp 00:08: [io 0x0400-0x0453]****[ 1.194545] pnp 00:08: [io 0x0458-0x047f]****[ 1.194546] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194547] pnp 00:08: [io 0x0500-0x057f]****[ 1.194548] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]****[ 1.194549] pnp 00:08: [mem 0xfec00000-0xfecfffff]****[ 1.194550] pnp 00:08: [mem 0xfed08000-0xfed08fff]****[ 1.194552] pnp 00:08: [mem 0xff000000-0xffffffff]****[ 1.194575] system 00:08: [io 0x0400-0x0453] has been reserved****[ 1.194577] system 00:08: [io 0x0458-0x047f] has been reserved****[ 1.194580] system 00:08: [io 0x0500-0x057f] has been reserved****[ 1.194582] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved****
[ 1.194585] system 00:08: [mem 0xfec00000-0xfecfffff] could not bereserved****
[ 1.194587] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved****
[ 1.194590] system 00:08: [mem 0xff000000-0xffffffff] has been reserved****
[ 1.194593] system 00:08: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194612] pnp 00:09: [io 0x0454-0x0457]****[ 1.194633] system 00:09: [io 0x0454-0x0457] has been reserved****[ 1.194636] system 00:09: Plug and Play ACPI device, IDs INT3f0dPNP0c02 (active)****
[ 1.194707] pnp 00:0a: [mem 0xfed00000-0xfed003ff]****[ 1.194749] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)****
[ 1.194840] pnp: PnP ACPI: found 11 devices****[ 1.194842] ACPI: ACPI bus type pnp unregistered****[ 1.200033] PCI: max bus depth: 2 pci_try_num: 3****[ 1.200099] pci 0000:00:1c.3: BAR 15: assigned [mem0xcfa00000-0xcfafffff pref]****
[ 1.200102] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.200104] pci 0000:00:01.0: bridge window [io disabled]****[ 1.200107] pci 0000:00:01.0: bridge window [mem disabled]****[ 1.200110] pci 0000:00:01.0: bridge window [mem pref disabled]****[ 1.200113] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.200115] pci 0000:00:1c.0: bridge window [io disabled]****[ 1.200120] pci 0000:00:1c.0: bridge window [mem disabled]****[ 1.200124] pci 0000:00:1c.0: bridge window [mem pref disabled]****[ 1.200131] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.200133] pci 0000:00:1c.1: bridge window [io disabled]****[ 1.200138] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.200143] pci 0000:00:1c.1: bridge window [mem pref disabled]****[ 1.200149] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.200151] pci 0000:00:1c.2: bridge window [io disabled]****[ 1.200156] pci 0000:00:1c.2: bridge window [mem disabled]****[ 1.200160] pci 0000:00:1c.2: bridge window [mem pref disabled]****[ 1.200167] pci 0000:05:00.0: BAR 6: assigned [mem0xcfa00000-0xcfa0ffff pref]****
[ 1.200170] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.200173] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.200179] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.200184] pci 0000:00:1c.3: bridge window [mem0xcfa00000-0xcfafffff pref]****
[ 1.200190] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.200192] pci 0000:00:1c.4: bridge window [io disabled]****[ 1.200198] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.200202] pci 0000:00:1c.4: bridge window [mem pref disabled]****[ 1.200208] pci 0000:07:00.0: PCI bridge to [bus 08-08]****[ 1.200213] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.200221] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200227] pci 0000:07:00.0: bridge window [mem pref disabled]****[ 1.200238] pci 0000:00:1c.6: PCI bridge to [bus 07-08]****[ 1.200241] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.200246] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200251] pci 0000:00:1c.6: bridge window [mem pref disabled]****[ 1.200258] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.200261] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.200266] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.200271] pci 0000:00:1c.7: bridge window [mem pref disabled]****[ 1.200284] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16****
[ 1.200288] pci 0000:00:01.0: setting latency timer to 64****[ 1.200295] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200299] pci 0000:00:1c.0: setting latency timer to 64****[ 1.200305] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16****
[ 1.200309] pci 0000:00:1c.1: setting latency timer to 64****[ 1.200317] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200321] pci 0000:00:1c.2: setting latency timer to 64****[ 1.200329] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200333] pci 0000:00:1c.3: setting latency timer to 64****[ 1.200339] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200344] pci 0000:00:1c.4: setting latency timer to 64****[ 1.200349] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18****
[ 1.200354] pci 0000:00:1c.6: setting latency timer to 64****[ 1.200360] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18****
[ 1.200366] pci 0000:07:00.0: setting latency timer to 64****[ 1.200373] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19****
[ 1.200378] pci 0000:00:1c.7: setting latency timer to 64****[ 1.200381] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]****[ 1.200382] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]****[ 1.200383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200385] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200386] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]****[ 1.200388] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]****[ 1.200389] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]****[ 1.200390] pci_bus 0000:05: resource 2 [mem 0xcfa00000-0xcfafffff pref]****
[ 1.200392] pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]****[ 1.200393] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]****[ 1.200394] pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200395] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]****[ 1.200396] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]****[ 1.200398] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]****[ 1.200399] pci_bus 0000:07: resource 7 [mem 0xcfa00000-0xffffffff]****[ 1.200400] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]****[ 1.200401] pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]****[ 1.200403] pci_bus 0000:08: resource 4 [io 0xd000-0xdfff]****[ 1.200404] pci_bus 0000:08: resource 5 [mem 0xfb900000-0xfb9fffff]****[ 1.200405] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]****[ 1.200406] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]****[ 1.200408] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]****
[ 1.200409] pci_bus 0000:08: resource 11 [mem 0xcfa00000-0xffffffff]****
[ 1.200410] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]****[ 1.200412] pci_bus 0000:09: resource 1 [mem 0xfb800000-0xfb8fffff]****[ 1.200429] NET: Registered protocol family 2****[ 1.200581] IP route cache hash table entries: 262144 (order: 9,2097152 bytes)****
[ 1.201217] TCP established hash table entries: 524288 (order: 11,8388608 bytes)****
[ 1.202168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)****
[ 1.202287] TCP: Hash tables configured (established 524288 bind 65536)****
[ 1.202290] TCP reno registered****[ 1.202300] UDP hash table entries: 4096 (order: 5, 131072 bytes)****[ 1.202327] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)****
[ 1.202401] NET: Registered protocol family 1****[ 1.202413] pci 0000:00:02.0: Boot video device****[ 1.458661] PCI: CLS 64 bytes, default 64****[ 1.458664] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)****
[ 1.458668] Placing 64MB software IO TLB between ffff8800ba5cc000 -ffff8800be5cc000****
[ 1.458670] software IO TLB at phys 0xba5cc000 - 0xbe5cc000****[ 1.459046] audit: initializing netlink socket (disabled)****[ 1.459053] type=2000 audit(1326825604.028:1): initialized****[ 1.479199] HugeTLB registered 2 MB page size, pre-allocated 0 pages****
[ 1.493833] VFS: Disk quotas dquot_6.5.2****[ 1.493867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)****
[ 1.494192] fuse init (API version 7.16)****[ 1.494238] msgmni has been set to 15393****[ 1.494464] Block layer SCSI generic (bsg) driver version 0.4 loaded(major 253)****
[ 1.494485] io scheduler noop registered****[ 1.494487] io scheduler deadline registered****[ 1.494508] io scheduler cfq registered (default)****[ 1.494590] pcieport 0000:00:01.0: setting latency timer to 64****[ 1.494609] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X****[ 1.494646] pcieport 0000:00:1c.0: setting latency timer to 64****[ 1.494683] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X****[ 1.494738] pcieport 0000:00:1c.1: setting latency timer to 64****[ 1.494774] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X****[ 1.494829] pcieport 0000:00:1c.2: setting latency timer to 64****[ 1.494866] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X****[ 1.494920] pcieport 0000:00:1c.3: setting latency timer to 64****[ 1.494957] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X****[ 1.495011] pcieport 0000:00:1c.4: setting latency timer to 64****[ 1.495047] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X****[ 1.495101] pcieport 0000:00:1c.7: setting latency timer to 64****[ 1.495138] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X****[ 1.495200] pcieport 0000:00:01.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495203] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded****
[ 1.495217] pcieport 0000:00:1c.0: Signaling PME through PCIe PMEinterrupt****
[ 1.495222] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded****
[ 1.495235] pcieport 0000:00:1c.1: Signaling PME through PCIe PMEinterrupt****
[ 1.495238] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495242] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded****
[ 1.495255] pcieport 0000:00:1c.2: Signaling PME through PCIe PMEinterrupt****
[ 1.495260] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded****
[ 1.495272] pcieport 0000:00:1c.3: Signaling PME through PCIe PMEinterrupt****
[ 1.495274] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495279] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded****
[ 1.495292] pcieport 0000:00:1c.4: Signaling PME through PCIe PMEinterrupt****
[ 1.495295] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495299] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded****
[ 1.495312] pcieport 0000:00:1c.7: Signaling PME through PCIe PMEinterrupt****
[ 1.495314] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt****
[ 1.495319] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded****
[ 1.495327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5****[ 1.495341] pciehp: PCI Express Hot Plug Controller Driver version: 0.4****
[ 1.495365] intel_idle: MWAIT substates: 0x1120****[ 1.495366] intel_idle: v0.4 model 0x2A****[ 1.495366] intel_idle: lapic_timer_reliable_states 0xffffffff****[ 1.495437] input: Power Button as/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0****
[ 1.495443] ACPI: Power Button [PWRB]****[ 1.495465] input: Power Button as/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1****
[ 1.495468] ACPI: Power Button [PWRF]****[ 1.495484] ACPI: acpi_idle yielding to intel_idle****[ 1.507996] ERST: Table is not found!****[ 1.508038] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled****
[ 1.598963] Freeing initrd memory: 19972k freed****[ 1.734643] Linux agpgart interface v0.103****[ 1.734703] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset****[ 1.734811] agpgart-intel 0000:00:00.0: detected gtt size: 2097152Ktotal, 262144K mappable****
[ 1.736156] agpgart-intel 0000:00:00.0: detected 262144K stolen memory****
[ 1.736242] agpgart-intel 0000:00:00.0: AGP aperture is 256M @0xd0000000****
[ 1.736783] brd: module loaded****[ 1.737031] loop: module loaded****[ 1.737249] Fixed MDIO Bus: probed****[ 1.737262] PPP generic driver version 2.4.2****[ 1.737279] tun: Universal TUN/TAP device driver, 1.6****[ 1.737281] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>****[ 1.737319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver****
[ 1.737339] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.737353] ehci_hcd 0000:00:1a.0: setting latency timer to 64****[ 1.737356] ehci_hcd 0000:00:1a.0: EHCI Host Controller****[ 1.737375] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned busnumber 1****
[ 1.737398] ehci_hcd 0000:00:1a.0: debug port 2****[ 1.741275] ehci_hcd 0000:00:1a.0: cache line size of 64 is notsupported****
[ 1.741288] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbd27000****[ 1.754372] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00****[ 1.754481] hub 1-0:1.0: USB hub found****[ 1.754485] hub 1-0:1.0: 2 ports detected****[ 1.754523] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->IRQ 23****
[ 1.754533] ehci_hcd 0000:00:1d.0: setting latency timer to 64****[ 1.754536] ehci_hcd 0000:00:1d.0: EHCI Host Controller****[ 1.754556] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned busnumber 2****
[ 1.754576] ehci_hcd 0000:00:1d.0: debug port 2****[ 1.758444] ehci_hcd 0000:00:1d.0: cache line size of 64 is notsupported****
[ 1.758448] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbd26000****[ 1.770362] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00****[ 1.770463] hub 2-0:1.0: USB hub found****[ 1.770465] hub 2-0:1.0: 2 ports detected****[ 1.770496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver****[ 1.770503] uhci_hcd: USB Universal Host Controller Interface driver****
[ 1.770534] i8042: PNP: No PS/2 controller found. Probing portsdirectly.****
[ 1.773136] serio: i8042 KBD port at 0x60,0x64 irq 1****[ 1.773141] serio: i8042 AUX port at 0x60,0x64 irq 12****[ 1.773201] mousedev: PS/2 mouse device common for all mice****[ 1.773262] rtc_cmos 00:04: RTC can wake from S4****[ 1.773338] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0****[ 1.773363] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpetirqs****
[ 1.773417] device-mapper: uevent: version 1.0.3****[ 1.773454] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)initialised: [email protected]****
[ 1.773553] cpuidle: using governor ladder****[ 1.773713] cpuidle: using governor menu****[ 1.773715] EFI Variables Facility v0.08 2004-May-17****[ 1.773827] TCP cubic registered****[ 1.773889] NET: Registered protocol family 10****[ 1.774114] NET: Registered protocol family 17****[ 1.774125] Registering the dns_resolver key type****[ 1.774172] PM: Hibernation image not present or could not be loaded.****
[ 1.774178] registered taskstats version 1****[ 1.785213] Magic number: 12:288:696****[ 1.785322] rtc_cmos 00:04: setting system clock to 2012-01-17 18:40:05UTC (1326825605)****
[ 1.786168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found****[ 1.786170] EDD information not available.****[ 1.787102] Freeing unused kernel memory: 984k freed****[ 1.787177] Write protecting the kernel read-only data: 10240k****[ 1.787507] Freeing unused kernel memory: 16k freed****[ 1.790022] Freeing unused kernel memory: 1396k freed****[ 1.800124] udevd[100]: starting version 173****[ 1.808108] wmi: Mapper loaded****[ 1.813001] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2****[ 1.813007] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.****[ 1.813032] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) ->IRQ 18****
[ 1.813044] e1000e 0000:00:19.0: setting latency timer to 64****[ 1.813152] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 1.813724] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->IRQ 17****
[ 1.813749] xhci_hcd 0000:03:00.0: setting latency timer to 64****[ 1.813753] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.813799] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 3****
[ 1.814364] [drm] Initialized drm 1.1.0 20060810****[ 1.817441] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,2004)****
[ 1.817460] 8139cp 0000:08:01.0: This (id 10ec:8139 rev 10) is not an8139C+ compatible chip, use 8139too****
[ 1.817788] 8139too: 8139too Fast Ethernet driver 0.9.28****[ 1.817815] 8139too 0000:08:01.0: PCI INT A -> GSI 19 (level, low) ->IRQ 19****
[ 1.820169] 8139too 0000:08:01.0: eth0: RealTek RTL8139 at 0xd000,00:40:f4:51:8a:62, IRQ 19****
[ 1.820201] firewire_ohci 0000:08:02.0: PCI INT A -> GSI 17 (level,low) -> IRQ 17****
[ 1.874437] firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCIv1.10, 4 IR + 8 IT contexts, quirks 0x11****
[ 1.874902] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbc00000****[ 1.874991] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X****[ 1.875002] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X****[ 1.875004] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X****[ 1.875007] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X****[ 1.875010] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X****[ 1.875012] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X****[ 1.875015] xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X****[ 1.875018] xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X****[ 1.875158] xHCI xhci_add_endpoint called for root hub****[ 1.875159] xHCI xhci_check_bandwidth called for root hub****[ 1.875181] hub 3-0:1.0: USB hub found****[ 1.875188] hub 3-0:1.0: 2 ports detected****[ 1.875234] xhci_hcd 0000:03:00.0: xHCI Host Controller****[ 1.875255] xhci_hcd 0000:03:00.0: new USB bus registered, assigned busnumber 4****
[ 1.875322] xHCI xhci_add_endpoint called for root hub****[ 1.875324] xHCI xhci_check_bandwidth called for root hub****[ 1.875342] hub 4-0:1.0: USB hub found****[ 1.875349] hub 4-0:1.0: 2 ports detected****[ 1.875384] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) ->IRQ 16****
[ 1.875409] xhci_hcd 0000:06:00.0: setting latency timer to 64****[ 1.875412] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.875431] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 5****
[ 1.936542] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfba00000****[ 1.936591] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X****[ 1.936594] xhci_hcd 0000:06:00.0: irq 57 for MSI/MSI-X****[ 1.936596] xhci_hcd 0000:06:00.0: irq 58 for MSI/MSI-X****[ 1.936599] xhci_hcd 0000:06:00.0: irq 59 for MSI/MSI-X****[ 1.936601] xhci_hcd 0000:06:00.0: irq 60 for MSI/MSI-X****[ 1.936604] xhci_hcd 0000:06:00.0: irq 61 for MSI/MSI-X****[ 1.936606] xhci_hcd 0000:06:00.0: irq 62 for MSI/MSI-X****[ 1.936609] xhci_hcd 0000:06:00.0: irq 63 for MSI/MSI-X****[ 1.936728] xHCI xhci_add_endpoint called for root hub****[ 1.936729] xHCI xhci_check_bandwidth called for root hub****[ 1.936748] hub 5-0:1.0: USB hub found****[ 1.936756] hub 5-0:1.0: 2 ports detected****[ 1.936787] xhci_hcd 0000:06:00.0: xHCI Host Controller****[ 1.936810] xhci_hcd 0000:06:00.0: new USB bus registered, assigned busnumber 6****
[ 1.936861] xHCI xhci_add_endpoint called for root hub****[ 1.936862] xHCI xhci_check_bandwidth called for root hub****[ 1.936872] hub 6-0:1.0: USB hub found****[ 1.936879] hub 6-0:1.0: 2 ports detected****[ 2.066176] usb 1-1: new high speed USB device number 2 using ehci_hcd****
[ 2.107612] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1)14:da:e9:4f:94:94****
[ 2.107616] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 NetworkConnection****
[ 2.107661] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No:FFFFFF-0FF****
[ 2.107675] ahci 0000:00:1f.2: version 3.0****[ 2.107696] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ20****
[ 2.107770] ahci 0000:00:1f.2: irq 64 for MSI/MSI-X****[ 2.122208] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x22impl SATA mode****[ 2.122219] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pioslum part ems apst ****
[ 2.122228] ahci 0000:00:1f.2: setting latency timer to 64****[ 2.130530] scsi0 : ahci****[ 2.130697] scsi1 : ahci****[ 2.130823] scsi2 : ahci****[ 2.130962] scsi3 : ahci****[ 2.131092] scsi4 : ahci****[ 2.131220] scsi5 : ahci****[ 2.131317] ata1: DUMMY****[ 2.131320] ata2: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25180irq 64****[ 2.131322] ata3: DUMMY****[ 2.131323] ata4: DUMMY****[ 2.131324] ata5: DUMMY****[ 2.131327] ata6: SATA max UDMA/133 abar m2048@0xfbd25000 port
0xfbd25380irq 64****[ 2.131351] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.131406] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ16****
[ 2.131414] i915 0000:00:02.0: setting latency timer to 64****[ 2.131534] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps
0x3impl SATA mode****[ 2.131538] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slumpart ****
[ 2.131545] ahci 0000:05:00.0: setting latency timer to 64****[ 2.131806] scsi6 : ahci****[ 2.131853] scsi7 : ahci****[ 2.131884] ata7: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10100irq 19****[ 2.131891] ata8: SATA max UDMA/133 abar m512@0xfbb10000 port
0xfbb10180irq 19****[ 2.131909] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ19****
[ 2.132032] ahci 0000:09:00.0: irq 65 for MSI/MSI-X****[ 2.132083] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps
0x3impl SATA mode****[ 2.132087] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbspio slum part sxs ****
[ 2.132093] ahci 0000:09:00.0: setting latency timer to 64****[ 2.132279] scsi8 : ahci****[ 2.132326] scsi9 : ahci****[ 2.132356] ata9: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810100irq 65****[ 2.132363] ata10: SATA max UDMA/133 abar m512@0xfb810000 port
0xfb810180irq 65****[ 2.178012] [drm:intel_opregion_setup], graphic opregion physical addr:0xbeb36018****
[ 2.178037] [drm:intel_opregion_setup], Public ACPI methods supported****
[ 2.178038] [drm:intel_opregion_setup], SWSCI supported****[ 2.178039] [drm:intel_opregion_setup], ASLE supported****[ 2.178057] i915 0000:00:02.0: irq 66 for MSI/MSI-X****[ 2.178060] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).****
[ 2.178063] [drm] Driver supports precise vblank timestamp query.****[ 2.178067] [drm:intel_detect_pch], Found CougarPoint PCH****[ 2.178069] [drm:intel_parse_bios], Using VBT from OpRegion: $VBTSNB/IVB-DESKTOPd****
[ 2.178070] [drm:parse_general_definitions], crt_ddc_bus_pin: 2****[ 2.178073] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBTtables:****
[ 2.178075] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 065000 1024 1048 1184 1344 768 771 777 806
0x80xa****[ 2.178080] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOSVBT tables:****
[ 2.178082] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200"0 162000 1600 1664 1856 2160 1200 1201 1204 1250
0x80xa****[ 2.178120] [drm:parse_sdvo_device_mapping], No SDVO device info isfound in VBT****
[ 2.178128] [drm:intel_dsm_pci_probe], no _DSM method for intel device****
[ 2.178153] [drm:intel_modeset_init], 2 display pipes available.****[ 2.178159] vgaarb: device changed decodes:PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem****
[ 2.178479] [drm:intel_crt_init], pch crt adpa set to 0xf40000****[ 2.180734] [drm:intel_sdvo_read_byte], i2c transfer returned -6****[ 2.180735] [drm:intel_sdvo_init], No SDVO device found on SDVOB****[ 2.180776] [drm:intel_dp_i2c_init], i2c_init DPDDC-B****[ 2.181283] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181284] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181790] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.181791] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.181840] [drm:intel_dp_i2c_init], i2c_init DPDDC-C****[ 2.182347] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182348] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182854] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.182855] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.182884] [drm:intel_dp_i2c_init], i2c_init DPDDC-D****[ 2.183390] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183391] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.183898] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110****[ 2.183934] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off****[ 2.183937] [drm:i915_get_vblank_timestamp], crtc 0 is disabled****[ 2.198842] hub 1-1:1.0: USB hub found****[ 2.198944] hub 1-1:1.0: 6 ports detected****[ 2.238120] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.262494] [drm:intel_update_fbc], ****[ 2.262738] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off****[ 2.262739] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.262741] [drm:i915_get_vblank_timestamp], crtc 1 is disabled****[ 2.262743] [drm:gm45_get_vblank_counter], trying to get vblank countfor disabled pipe B****
[ 2.263383] [drm:intel_update_fbc], ****[ 2.291371] [drm:init_status_page], render ring hws offset: 0x00000000****
[ 2.291442] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000****
[ 2.291509] [drm:init_status_page], blt ring hws offset: 0x00042000****[ 2.291622] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 2.291624] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplugdetect cycle: adpa=0xf40000****
[ 2.306031] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 2.306037] [drm:intel_crt_detect], CRT not detected via hotplug****[ 2.306041] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 2.306045] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 2.310030] usb 2-1: new high speed USB device number 2 using ehci_hcd****
[ 2.317523] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 2.317525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 2.318032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.326520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.334513] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.342008] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.342014] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 2.342019] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 2.353731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 2.353733] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 2.374028] firewire_core: created device fw0: GUID 001fc6000017dc7a,S400****
[ 2.442408] hub 2-1:1.0: USB hub found****[ 2.442512] hub 2-1:1.0: 8 ports detected****[ 2.449991] ata8: SATA link down (SStatus 0 SControl 300)****[ 2.450005] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.450070] ata7: SATA link down (SStatus 0 SControl 300)****[ 2.450073] ata9: SATA link down (SStatus 0 SControl 300)****[ 2.456453] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7****[ 2.456457] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.457950] Refined TSC clocksource calibration: 3411.132 MHz.****[ 2.457965] Switching to clocksource tsc****[ 2.479593] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 2.479615] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)****[ 2.479747] ata6.00: configured for UDMA/133****[ 2.480239] ata2.00: ATA-8: ST3000DM001-9YN166, CC9B, max UDMA/133****[ 2.480241] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth31/32), AA****
[ 2.480762] ata2.00: configured for UDMA/133****[ 2.480862] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1CC9B PQ: 0 ANSI: 5****
[ 2.480948] sd 1:0:0:0: Attached scsi generic sg0 type 0****[ 2.480989] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00TB/2.72 TiB)****
[ 2.480995] sd 1:0:0:0: [sda] 4096-byte physical blocks****[ 2.481031] sd 1:0:0:0: [sda] Write Protect is off****[ 2.481034] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00****[ 2.481043] sd 1:0:0:0: [sda] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.481065] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ1AA0 PQ: 0 ANSI: 5****
[ 2.481175] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00TB/931 GiB)****
[ 2.481192] sd 5:0:0:0: Attached scsi generic sg1 type 0****[ 2.481210] sd 5:0:0:0: [sdb] Write Protect is off****[ 2.481214] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00****[ 2.481230] sd 5:0:0:0: [sdb] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.523901] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >****[ 2.524163] sd 5:0:0:0: [sdb] Attached SCSI disk****[ 2.533977] usb 1-1.1: new high speed USB device number 3 using ehci_hcd****
[ 2.604494] [drm:drm_mode_debug_printmodeline], Modeline23:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 2.604497] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604499] [drm:drm_mode_debug_printmodeline], Modeline22:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 2.604502] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 2.604503] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 2.604505] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.604508] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 2.604510] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 2.604512] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 2.605019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.610331] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.618328] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.625817] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.625823] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 2.625828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 2.626336] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.628997] usbcore: registered new interface driver uas****[ 2.633828] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)****[ 2.634316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.637164] ata10.00: ATA-7: SAMSUNG HD160JJ, WU100-42, max UDMA/100****
[ 2.637172] ata10.00: 312581808 sectors, multi 0: LBA48 ****[ 2.640472] ata10.00: configured for UDMA/100****[ 2.640640] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD160JJWU10 PQ: 0 ANSI: 5****
[ 2.640709] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160GB/149 GiB)****
[ 2.640719] sd 9:0:0:0: Attached scsi generic sg2 type 0****[ 2.640732] sd 9:0:0:0: [sdc] Write Protect is off****[ 2.640734] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00****[ 2.640745] sd 9:0:0:0: [sdc] Write cache: enabled, read cache:enabled, doesn't support DPO or FUA****
[ 2.642305] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 2.649806] [drm:ironlake_dp_detect], DPCD: 0000****[ 2.649813] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 2.649817] [drm:drm_setup_crtcs], ****[ 2.649821] [drm:drm_enable_connectors], connector 5 enabled? no****[ 2.649824] [drm:drm_enable_connectors], connector 8 enabled? no****[ 2.649827] [drm:drm_enable_connectors], connector 11 enabled? no****[ 2.649829] [drm:drm_enable_connectors], connector 14 enabled? no****[ 2.649832] [drm:drm_enable_connectors], connector 16 enabled? yes****[ 2.649835] [drm:drm_enable_connectors], connector 17 enabled? no****[ 2.649837] [drm:drm_enable_connectors], connector 19 enabled? no****[ 2.649840] [drm:drm_target_preferred], looking for cmdline mode onconnector 16****
[ 2.649843] [drm:drm_target_preferred], looking for preferred mode onconnector 16****
[ 2.649847] [drm:drm_target_preferred], found mode 1024x768****[ 2.649849] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config****
[ 2.649854] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3****
[ 2.651934] sdc: sdc1 sdc2****[ 2.652102] sd 9:0:0:0: [sdc] Attached SCSI disk****[ 2.652539] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, boffff88022026e200****
[ 2.652572] fbcon: inteldrmfb (fb0) is primary device****[ 2.652601] [drm:drm_crtc_helper_set_config], ****[ 2.652602] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.652605] [drm:drm_crtc_helper_set_config], crtc has no fb, full modeset****
[ 2.652606] [drm:drm_crtc_helper_set_config], modes are different, fullmode set****
[ 2.652608] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 00 0 0 0 0
0x00x0****[ 2.652610] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652612] [drm:drm_crtc_helper_set_config], encoder changed, fullmode switch****
[ 2.652613] [drm:drm_crtc_helper_set_config], crtc changed, full modeswitch****
[ 2.652614] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.652616] [drm:drm_crtc_helper_set_config], attempting to set modefrom userspace****
[ 2.652617] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.652620] [drm:drm_crtc_helper_set_mode], [CRTC:3]****[ 2.652867] [drm:ironlake_crtc_mode_set], Mode for pipe A:****[ 2.652869] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 2.705766] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.705772] [drm:intel_pipe_set_base_atomic], Writing base 0006300000000000 0 0 4096****
[ 2.705776] [drm:intel_update_fbc], ****[ 2.705779] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705783] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705786] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705790] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.705794] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set[MODE:22:1024x768]****
[ 2.705799] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -plane 5, cursor: 6****
[ 2.705803] [drm:ironlake_check_srwm], watermark 1: display plane 9,fbc lines 3, cursor 6****
[ 2.705806] [drm:ironlake_check_srwm], watermark 2: display plane 11,fbc lines 3, cursor 6****
[ 2.705809] [drm:ironlake_check_srwm], watermark 3: display plane 47,fbc lines 3, cursor 6****
[ 2.713838] usb 2-1.2: new low speed USB device number 3 using ehci_hcd****
[ 2.761732] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.794256] sda: sda1 sda2 sda3 sda4 sda5****[ 2.794477] sd 1:0:0:0: [sda] Attached SCSI disk****[ 2.795014] Initializing USB Mass Storage driver...****[ 2.795076] scsi10 : usb-storage 1-1.1:1.0****[ 2.795232] usbcore: registered new interface driver usb-storage****[ 2.795243] USB Mass Storage support registered.****[ 2.817689] [drm:intel_wait_for_vblank], vblank wait timed out****[ 2.818492] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700****[ 2.818494] [drm:gen6_fdi_link_train], FDI train 1 done.****[ 2.819143] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600****[ 2.819145] [drm:gen6_fdi_link_train], FDI train 2 done.****[ 2.819146] [drm:gen6_fdi_link_train], FDI train done.****[ 2.820350] [drm:intel_update_fbc], ****[ 2.820357] [drm:drm_crtc_helper_set_config], Setting connector DPMSstate to on****
[ 2.820359] [drm:drm_crtc_helper_set_config],[CONNECTOR:16:HDMI-A-3] set DPMS on****
[ 2.820375] [drm:drm_crtc_helper_set_config], ****[ 2.820376] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 2.820379] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820382] Console: switching to colour frame buffer device 128x48****[ 2.820389] [drm:drm_crtc_helper_set_config], ****[ 2.820390] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 2.820392] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 2.820861] input: CHICONY HP Basic USB Keyboard as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2****
[ 2.820907] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HIDv1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:1d.0-1.2/input0****[ 2.820913] usbcore: registered new interface driver usbhid****[ 2.820914] usbhid: USB HID core driver****[ 2.821963] fb0: inteldrmfb frame buffer device****[ 2.821976] drm: registered panic notifier****[ 2.822622] fixme: max PWM is zero.****[ 2.822700] acpi device:42: registered as cooling_device8****[ 2.822882] input: Video Bus as/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3****
[ 2.822935] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:no)****
[ 2.822965] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 onminor 0****
[ 2.837055] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 2.885730] usb 2-1.3: new low speed USB device number 4 using ehci_hcd****
[ 2.984274] input: Logitech Logitech USB Optical Mouse as/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4****
[ 2.984351] generic-usb 0003:046D:C018.0002: input,hidraw1: USB HIDv1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0****
[ 3.057611] usb 2-1.7: new full speed USB device number 5 using ehci_hcd****
[ 3.395112] [drm:drm_crtc_helper_set_config], ****[ 3.395114] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.395119] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445386] [drm:i915_driver_open], ****[ 3.445394] [drm:drm_crtc_helper_set_config], ****[ 3.445395] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445401] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445403] [drm:drm_crtc_helper_set_config], ****[ 3.445404] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445406] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445411] [drm:i915_driver_open], ****[ 3.445414] [drm:drm_crtc_helper_set_config], ****[ 3.445415] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.445417] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445418] [drm:drm_crtc_helper_set_config], ****[ 3.445419] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]****[ 3.445421] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.445425] [drm:i915_driver_open], ****[ 3.445458] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445460] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 3.445464] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445466] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445470] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445471] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445473] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445475] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 3.445476] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 3.445479] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 3.445480] [drm:intel_crt_detect], CRT not detected via hotplug****[ 3.445481] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 3.445483] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.445485] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.456667] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.456669] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 3.456670] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 3.467863] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 3.467865] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.467867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.468374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.473769] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.481763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.489269] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.489275] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.489283] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 3.489287] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 3.489796] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.497754] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.505751] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.513241] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.513247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 3.513261] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.513265] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.524452] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.524454] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 3.524456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 3.535650] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 3.535652] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.535654] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 3.654399] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 3.772847] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 3.772849] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772851] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 3.772853] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 3.772855] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 3.772857] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 3.772859] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 3.772861] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 3.772864] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 3.774172] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.774175] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.774681] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.781573] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.789566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.797056] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.797062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.797071] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 3.797075] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 3.797582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.805556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.813548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.821041] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.821048] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 3.821059] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.821063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.821571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.829543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.837537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.845031] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.845037] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.845046] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 3.845049] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 3.845557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.853527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.861521] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 3.869013] [drm:ironlake_dp_detect], DPCD: 0000****[ 3.869020] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 3.869189] [drm:drm_crtc_helper_set_config], ****[ 3.869190] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23]#connectors=1 (x y) (0 0)****
[ 3.869194] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 3.893533] EXT4-fs (sdb7): INFO: recovery required on readonlyfilesystem****
[ 3.893550] EXT4-fs (sdb7): write access will be enabled during recovery****
[ 3.921726] scsi 10:0:0:0: Direct-Access Multiple Card Reader1.00 PQ: 0 ANSI: 0****
[ 3.921816] scsi: killing requests for dead queue****[ 3.973015] scsi: killing requests for dead queue****[ 4.032964] scsi: killing requests for dead queue****[ 4.096945] scsi: killing requests for dead queue****[ 4.104941] scsi: killing requests for dead queue****[ 4.105032] scsi: killing requests for dead queue****[ 4.116928] scsi: killing requests for dead queue****[ 4.116993] scsi: killing requests for dead queue****[ 4.117151] sd 10:0:0:0: Attached scsi generic sg3 type 0****[ 4.252427] EXT4-fs (sdb7): orphan cleanup on readonly fs****[ 4.252444] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684717****
[ 4.252459] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684687****
[ 4.252463] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684686****
[ 4.252466] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684685****
[ 4.252469] EXT4-fs (sdb7): ext4_orphan_cleanup: deleting unreferencedinode 6684684****
[ 4.252472] EXT4-fs (sdb7): 5 orphan inodes deleted****[ 4.252483] EXT4-fs (sdb7): recovery complete****[ 4.811475] sd 10:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9GB/14.8 GiB)****
[ 4.812219] sd 10:0:0:0: [sdd] Write Protect is off****[ 4.812247] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00****[ 4.812979] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.813012] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.815842] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.815873] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.828350] sdd: sdd1****[ 4.830958] sd 10:0:0:0: [sdd] No Caching mode page present****[ 4.830990] sd 10:0:0:0: [sdd] Assuming drive cache: write through****[ 4.831022] sd 10:0:0:0: [sdd] Attached SCSI removable disk****[ 5.120434] EXT4-fs (sdb7): mounted filesystem with ordered data mode.Opts: (null)****
[ 12.835229] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 12.835236] [drm:intel_crt_detect], CRT not detected via hotplug****[ 12.835239] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 12.846381] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 12.846886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.851717] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.859713] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 12.867202] [drm:ironlake_dp_detect], DPCD: 0000****[ 12.867208] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 12.878344] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 12.996642] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 12.996644] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 12.997149] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.003620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.011615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.019105] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.019111] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 13.019621] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.027603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.035599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 13.043095] [drm:ironlake_dp_detect], DPCD: 0000****[ 13.043101] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 16.146711] udevd[409]: starting version 173****[ 16.169520] lp: driver loaded but no devices found****[ 16.170859] mei: module is from the staging directory, the quality isunknown, you have been warned.****
[ 16.171147] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21****
[ 16.171153] mei 0000:00:16.0: setting latency timer to 64****[ 16.193866] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->IRQ 22****
[ 16.193870] hda_intel: position_fix set to 1 for device 1043:8410****[ 16.193917] HDA Intel 0000:00:1b.0: irq 67 for MSI/MSI-X****[ 16.193942] HDA Intel 0000:00:1b.0: setting latency timer to 64****[ 16.214075] asus_wmi: ASUS WMI generic driver loaded****[ 16.214419] asus_wmi: Initialization: 0x0****[ 16.214442] asus_wmi: BIOS WMI version: 0.9****[ 16.214484] asus_wmi: SFUN value: 0x0****[ 16.215277] input: Eee PC WMI hotkeys as/devices/platform/eeepc-wmi/input/input5****
[ 16.215546] asus_wmi: Backlight controlled by ACPI video driver****[ 16.239033] Bluetooth: Atheros AR30xx firmware driver ver 1.0****[ 16.319694] Adding 10485756k swap on /dev/sdb5. Priority:-1 extents:1across:10485756k ****
[ 16.344070] type=1400 audit(1326825620.063:2): apparmor="STATUS"operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser"****
[ 16.344082] type=1400 audit(1326825620.063:3): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=461 comm="apparmor_parser"****
[ 16.344112] type=1400 audit(1326825620.063:4): apparmor="STATUS"operation="profile_replace" name="/sbin/dhclient" pid=604 comm="apparmor_parser"****
[ 16.344294] type=1400 audit(1326825620.063:5): apparmor="STATUS"operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"****
[ 16.344310] type=1400 audit(1326825620.063:6): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"****
[ 16.344337] type=1400 audit(1326825620.063:7): apparmor="STATUS"operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"****
[ 16.344432] type=1400 audit(1326825620.063:8): apparmor="STATUS"operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"****
[ 16.344449] type=1400 audit(1326825620.063:9): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"****
[ 16.344490] type=1400 audit(1326825620.063:10): apparmor="STATUS"operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"****
[ 16.345721] type=1400 audit(1326825620.067:11): apparmor="STATUS"operation="profile_load" name="/usr/sbin/ntpd" pid=784 comm="apparmor_parser"****
[ 16.489020] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.544890] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X****[ 16.545319] ADDRCONF(NETDEV_UP): eth1: link is not ready****[ 16.550021] 8139too 0000:08:01.0: eth0: link up, 100Mbps, full-duplex,lpa 0x45E1****
[ 16.583061] usbcore: registered new interface driver ath3k****[ 16.602755] usb 2-1.7: USB disconnect, device number 5****[ 16.738566] hda_codec: ALC892: BIOS auto-probing.****[ 16.745452] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.745470] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.745524] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.751944] HDMI: detected monitor at connection type HDMI****[ 16.751945] HDMI: available speakers: FL/FR****[ 16.751947] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.752027] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1****
[ 16.752109] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1****[ 16.753555] HDMI: detected monitor at connection type HDMI****[ 16.753556] HDMI: available speakers: FL/FR****[ 16.753558] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 16.753900] input: HDA Intel PCH HDMI/DP,pcm=7 as/devices/pci0000:00/0000:00:1b.0/sound/card0/input6****
[ 16.754026] input: HDA Intel PCH Headphone as/devices/pci0000:00/0000:00:1b.0/sound/card0/input7****
[ 16.756212] HDMI: detected monitor at connection type HDMI****[ 16.756213] HDMI: available speakers: FL/FR****[ 16.756215] HDMI: supports coding type LPCM: channels = 2, rates =44100 48000 88200, bits = 16****
[ 17.106570] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro****[ 17.513947] EXT4-fs (sdb1): mounted filesystem with ordered data mode.Opts: (null)****
[ 17.607438] init: Failed to spawn network-manager main process: unableto execute: No such file or directory****
[ 17.607783] init: modemmanager main process (1172) killed by TERM signal****
[ 17.752244] ppdev: user-space parallel port driver****[ 17.805783] init: ssh main process (1139) terminated with status 255****
[ 17.818308] init: failsafe main process (1120) killed by TERM signal****
[ 17.832084] usb 2-1.7: new full speed USB device number 6 using ehci_hcd****
[ 17.863275] init: apport pre-start process (1389) terminated withstatus 1****
[ 17.864535] init: smbd main process (1133) killed by HUP signal****[ 17.864554] init: smbd main process ended, respawning****[ 17.870842] init: apport post-stop process (1439) terminated withstatus 1****
[ 17.873582] init: lightdm main process (1398) killed by TERM signal****[ 17.933637] [drm:i915_driver_open], ****[ 17.933663] [drm:i915_driver_open], ****[ 17.933797] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933799] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7]ENCODERS[7]****
[ 17.933865] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933867] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933871] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933872] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933875] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933877] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 17.933879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 17.933881] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 17.933883] [drm:intel_crt_detect], CRT not detected via hotplug****[ 17.933884] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 17.933911] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.933912] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.936800] Bluetooth: Core ver 2.16****[ 17.936815] NET: Registered protocol family 31****[ 17.936816] Bluetooth: HCI device and connection manager initialized****
[ 17.936818] Bluetooth: HCI socket layer initialized****[ 17.936819] Bluetooth: L2CAP socket layer initialized****[ 17.936870] Bluetooth: SCO socket layer initialized****[ 17.937074] Bluetooth: Generic Bluetooth USB driver ver 0.6****[ 17.937171] usbcore: registered new interface driver btusb****[ 17.945312] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.945316] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 17.945318] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 17.956431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 17.956451] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.956453] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.956959] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.964438] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.976430] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 17.988023] [drm:ironlake_dp_detect], DPCD: 0000****[ 17.988026] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 17.988030] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 17.988032] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 17.988537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.000416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.012408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.023900] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.023905] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.023955] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.023960] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.035069] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.035072] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.035073] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.046272] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.046290] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.046292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.164376] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.282389] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.282393] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282394] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.282396] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.282399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.282400] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.282403] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.282405] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.282413] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.282445] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.282447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.282953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.288254] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.296241] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.303737] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.303744] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.303752] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.303756] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.304262] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.312236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.320229] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.327722] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.327728] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.327786] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.327791] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.328297] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.336218] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.344213] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.351710] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.351716] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.351725] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.351729] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.352236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.360206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.368199] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.375693] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.375700] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.375769] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375783] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375787] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375788] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375790] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375792] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.375793] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.375795] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.375796] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.375797] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.375812] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.375814] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.386924] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.386927] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.386928] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.398015] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.398029] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.398031] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.398535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.404169] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.412168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.419658] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.419665] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.419673] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.419676] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.420183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.428147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.436142] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.443634] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.443638] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.443691] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.443694] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.454886] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.454892] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.454894] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.466030] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.466056] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.466058] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 18.583871] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 18.701804] [drm:drm_mode_debug_printmodeline], Modeline28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 18.701807] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701808] [drm:drm_mode_debug_printmodeline], Modeline27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 18.701810] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 18.701812] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 18.701814] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 18.701816] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 18.701819] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 18.701824] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.702251] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.702253] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.702759] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.707980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.715979] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.723467] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.723474] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.723482] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 18.723486] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 18.723993] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.731964] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.739961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.747453] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.747459] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 18.747506] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.747511] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.748019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.755952] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.763941] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.771433] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.771447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.771461] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 18.771462] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 18.771967] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.779930] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.787937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.795429] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.795436] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 18.796613] [drm:drm_mode_addfb], [FB:27]****[ 18.796653] [drm:drm_mode_setcrtc], [CRTC:3]****[ 18.796656] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3]****[ 18.796658] [drm:drm_crtc_helper_set_config], ****[ 18.796659] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27]#connectors=1 (x y) (0 0)****
[ 18.796664] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3]to [CRTC:3]****
[ 18.798703] [drm:intel_pipe_set_base_atomic], Writing base 0036300000000000 0 0 4096****
[ 18.798706] [drm:intel_update_fbc], ****[ 18.808123] [drm:intel_prepare_page_flip], preparing flip with no unpinwork?****
[ 18.851392] [drm:intel_wait_for_vblank], vblank wait timed out****[ 18.856501] [drm:i915_getparam], Unknown parameter 16****[ 18.871060] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871064] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871068] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871069] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871072] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871074] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 18.871076] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 18.871077] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 18.871079] [drm:intel_crt_detect], CRT not detected via hotplug****[ 18.871080] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 18.871084] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.871086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.882303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.882306] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 18.882308] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 18.893431] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 18.893439] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.893441] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.893946] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.899856] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.907858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.919357] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.919363] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.919377] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 18.919381] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 18.919887] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.931836] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.939833] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 18.947323] [drm:ironlake_dp_detect], DPCD: 0000****[ 18.947328] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 18.947347] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.947351] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.958432] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.958437] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 18.958438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 18.969573] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 18.969581] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 18.969583] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.088092] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.206008] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.206011] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206012] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.206015] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.206017] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.206019] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.206021] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.206023] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.206035] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.206193] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.206195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.206701] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.211665] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.219668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.227151] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.227156] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.227170] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.227173] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.227679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.235642] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.243644] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.251133] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.251138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.251157] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.251161] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.251668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.259632] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.267631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.275196] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.275200] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.275207] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 19.275209] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 19.275716] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.283616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.291614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.299116] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.299124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 19.301832] [drm:intel_crtc_cursor_set], ****[ 19.375154] Bluetooth: RFCOMM TTY layer initialized****[ 19.375158] Bluetooth: RFCOMM socket layer initialized****[ 19.375160] Bluetooth: RFCOMM ver 1.11****[ 19.375983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3****[ 19.375984] Bluetooth: BNEP filters: protocol multicast****[ 19.404321] init: ssh main process (1294) terminated with status 255****
[ 19.628562] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628567] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628572] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628575] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628578] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628582] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 19.628585] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 19.628588] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 19.628590] [drm:intel_crt_detect], CRT not detected via hotplug****[ 19.628592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 19.628599] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.628601] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.639574] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.639579] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 19.639581] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 19.651063] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 19.651075] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.651077] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.651584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.659374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.667380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.674869] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.674873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.674900] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 19.674902] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 19.675408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.683368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.691365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.698854] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.698857] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 19.698888] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.698890] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.710004] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.710009] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 19.710010] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 19.721134] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 19.721139] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.721141] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 19.838802] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 19.956581] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 19.956585] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956586] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 19.956589] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 19.956592] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 19.956594] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 19.956597] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 19.956600] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 19.956609] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 19.956826] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.956828] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.957334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.963200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.971193] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.978685] [drm:ironlake_dp_detect], DPCD: 0000****[ 19.978692] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 19.978707] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 19.978711] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 19.979217] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.987183] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 19.995177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.002672] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.002679] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 20.002698] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.002702] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.003210] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.011168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.019162] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.026656] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.026663] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.026677] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 20.026681] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 20.027189] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.035154] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.043138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.050642] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.050648] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 20.080980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.091113] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.099114] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.106606] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.107186] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.115097] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.127104] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.134592] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.135174] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.143081] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.151074] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.162571] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.303064] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 20.303111] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.303113] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.307990] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, FlowControl: Rx/Tx****
[ 20.308391] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready****[ 20.847217] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847222] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847226] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847228] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847230] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847234] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 20.847235] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 20.847237] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 20.847239] [drm:intel_crt_detect], CRT not detected via hotplug****[ 20.847240] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 20.847245] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.847247] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.858379] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.858382] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 20.858383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 20.869494] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 20.869503] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.869505] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.870009] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.874629] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.882627] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.890117] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.890124] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.890139] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 20.890143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 20.890651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.898616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.906612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 20.914112] [drm:ironlake_dp_detect], DPCD: 0000****[ 20.914115] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 20.914135] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.914138] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.925263] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.925266] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 20.925267] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 20.936388] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 20.936394] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 20.936396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 21.054345] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 21.172343] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 21.172346] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172347] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 21.172349] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 21.172352] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 21.172353] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 21.172355] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 21.172358] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 21.172367] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 21.172527] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.172529] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.173035] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.178444] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.186442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.193937] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.193943] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.193958] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 21.193962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 21.194469] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.202427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.210424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.217900] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.217903] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 21.217933] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.217935] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.218440] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.226399] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.234408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.241904] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.241910] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.241925] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 21.241930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 21.242437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.250402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.258392] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 21.265889] [drm:ironlake_dp_detect], DPCD: 0000****[ 21.265895] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 21.310406] [drm:i915_driver_open], ****[ 21.310638] [drm:i915_getparam], Unknown parameter 16****[ 22.145057] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0****
[ 22.308835] EXT4-fs (sdb1): re-mounted. Opts: commit=0****[ 22.602011] init: plymouth-stop pre-start process (2161) terminatedwith status 1****
[ 23.252862] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252866] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252870] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252871] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252873] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252876] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 23.252878] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 23.252880] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 23.252881] [drm:intel_crt_detect], CRT not detected via hotplug****[ 23.252882] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 23.252887] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.252889] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.264062] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.264065] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 23.264066] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 23.275207] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 23.275216] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.275218] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.275723] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.281128] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.289117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.296613] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.296619] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.296635] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 23.296639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 23.297147] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.305115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.313112] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.320609] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.320615] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 23.320635] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.320639] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.331753] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.331756] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 23.331757] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 23.342870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 23.342877] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.342879] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 23.460856] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 23.578740] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 23.578743] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578745] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 23.578747] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 23.578749] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 23.578751] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 23.578753] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 23.578755] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 23.578762] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 23.578924] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.578926] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.579431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.584931] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.592927] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.600416] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.600420] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.600446] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 23.600448] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 23.600953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.608916] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.616910] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.624403] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.624417] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 23.624436] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.624438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.624943] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.632899] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.640895] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.648387] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.648390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 23.648417] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 23.648419] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 23.648923] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.656886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.664892] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 23.672383] [drm:ironlake_dp_detect], DPCD: 0000****[ 23.672390] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 27.034272] eth0: no IPv6 routers present****[ 27.684552] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684556] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684560] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684561] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684564] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684566] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 27.684568] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 27.684570] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 27.684571] [drm:intel_crt_detect], CRT not detected via hotplug****[ 27.684572] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 27.684578] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.684579] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.695743] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.695745] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 27.695746] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 27.706962] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 27.706970] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.706972] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.707477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.714348] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.722368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.729836] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.729840] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.729872] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 27.729874] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 27.730380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.738334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.746362] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 27.753823] [drm:ironlake_dp_detect], DPCD: 0000****[ 27.753827] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 27.753861] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.753864] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.765154] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.765161] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 27.765162] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 27.776296] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 27.776302] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 27.776304] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 27.894206] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.012130] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.012134] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012136] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.012140] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.012142] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.012145] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.012148] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.012151] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.012158] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.012160] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.012161] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.012163] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 28.023288] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 28.023793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.030161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.038157] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.045649] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.045655] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 28.056760] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 28.174011] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.174013] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 28.174519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.182065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.190061] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.197550] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.197556] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 28.198064] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.206051] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.214046] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.221538] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.221544] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 28.221777] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.221779] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.222284] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.230041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.238038] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.245529] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.245536] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.245551] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.245555] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.246063] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.254027] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.262022] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.269515] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.269522] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.269541] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.269546] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.270052] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.278011] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.286007] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.293500] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.293507] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.293521] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.293525] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.294032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.301998] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.309991] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.317484] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.317491] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.449308] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449313] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449316] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449318] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449320] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449323] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.449324] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.449326] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.449328] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.449329] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.449333] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.449335] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.460508] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.460512] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.460514] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.471685] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.471694] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.471696] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.472202] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.477955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.485886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.493376] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.493383] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.493398] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.493402] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.493909] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.501872] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.509865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.517358] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.517365] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.517385] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.517389] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.528604] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.528608] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.528609] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.539821] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.539844] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.539846] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 28.657898] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 28.775791] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 28.775794] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775795] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 28.775798] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 28.775800] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 28.775802] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 28.775804] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 28.775806] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 28.775817] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.775975] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.775977] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.776483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.781695] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.793689] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.801185] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.801192] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.801207] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 28.801211] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 28.801718] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.813680] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.821672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.829165] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.829171] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 28.829191] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.829195] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.829702] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.837666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.845660] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.853151] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.853157] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.853172] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 28.853176] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 28.853684] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.861648] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.869636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.877137] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.877143] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 28.896276] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896280] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896284] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896286] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896288] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896291] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 28.896292] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 28.896295] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 28.896296] [drm:intel_crt_detect], CRT not detected via hotplug****[ 28.896298] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 28.896302] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.896303] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.907396] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.907398] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 28.907400] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 28.918540] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 28.918548] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.918550] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.919056] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.925603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.933599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.941091] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.941098] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.941112] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 28.941116] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 28.941624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.949589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.957582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 28.965079] [drm:ironlake_dp_detect], DPCD: 0000****[ 28.965086] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 28.965106] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.965110] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.976237] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.976241] [drm:drm_mode_getconnector], [CONNECTOR:14:?]****[ 28.976243] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2]****
[ 28.987399] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:14:HDMI-A-2] disconnected****
[ 28.987404] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 28.987406] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3]****
[ 29.105498] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 29.223447] [drm:drm_mode_debug_printmodeline], Modeline30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15*
***[ 29.223449] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223451] [drm:drm_mode_debug_printmodeline], Modeline29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125
0x480x15*
***[ 29.223453] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7****
[ 29.223455] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:16:HDMI-A-3] probed modes :****
[ 29.223457] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768"60 65000 1024 1048 1184 1344 768 771 777 806
0x400xa****[ 29.223459] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600"60 40000 800 840 968 1056 600 601 605 628
0x400x5****[ 29.223461] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480"60 25200 640 656 752 800 480 490 492 525
0x400xa****[ 29.223469] [drm:drm_mode_getconnector], [CONNECTOR:16:?]****[ 29.223624] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.223625] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.224130] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.229416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.237407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.244905] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.244911] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.244926] [drm:drm_mode_getconnector], [CONNECTOR:17:?]****[ 29.244930] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2]****
[ 29.245437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.253402] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.261397] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.268890] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.268896] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:17:DP-2] disconnected****
[ 29.268916] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.268920] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.269427] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.277383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.285385] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.292875] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.292881] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 29.292896] [drm:drm_mode_getconnector], [CONNECTOR:19:?]****[ 29.292900] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3]****
[ 29.293407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.301372] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.309366] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 29.316863] [drm:ironlake_dp_detect], DPCD: 0000****[ 29.316870] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:19:DP-3] disconnected****
[ 30.783932] eth1: no IPv6 routers present****[ 38.259281] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 38.259287] [drm:intel_crt_detect], CRT not detected via hotplug****[ 38.259291] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] statusupdated from 2 to 2****
[ 38.270384] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] statusupdated from 2 to 2****
[ 38.270890] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.275767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.283760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.291253] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.291259] [drm:output_poll_execute], [CONNECTOR:11:DP-1] statusupdated from 2 to 2****
[ 38.302369] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] statusupdated from 2 to 2****
[ 38.419728] [drm:drm_detect_monitor_audio], Monitor has basic audiosupport****
[ 38.419730] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] statusupdated from 1 to 1****
[ 38.420234] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.427672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.435667] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.443158] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.443164] [drm:output_poll_execute], [CONNECTOR:17:DP-2] statusupdated from 2 to 2****
[ 38.443673] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.451655] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.459651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 38.467143] [drm:ironlake_dp_detect], DPCD: 0000****[ 38.467149] [drm:output_poll_execute], [CONNECTOR:19:DP-3] statusupdated from 2 to 2****
[ 62.272823] [drm:intel_crtc_cursor_set], ****[ 62.272826] [drm:intel_crtc_cursor_set], cursor off****[ 62.272850] [drm:intel_crtc_cursor_set], ****[ 69.601430] [drm:intel_crtc_cursor_set], ****[ 69.601433] [drm:intel_crtc_cursor_set], cursor off****[ 95.962368] [drm:intel_crtc_cursor_set], ****[ 99.190494] [drm:intel_crtc_cursor_set], ****[ 99.190498] [drm:intel_crtc_cursor_set], cursor off****[ 101.207418] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207425] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207430] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207434] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207438] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207444] [drm:drm_mode_getconnector], [CONNECTOR:5:?]****[ 101.207447] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1]****
[ 101.207450] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplugadpa=0xf40000, result 0****
[ 101.207453] [drm:intel_crt_detect], CRT not detected via hotplug****[ 101.207456] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:5:VGA-1] disconnected****
[ 101.207465] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.207468] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.218731] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.218740] [drm:drm_mode_getconnector], [CONNECTOR:8:?]****[ 101.218745] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1]****
[ 101.229913] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:8:HDMI-A-1] disconnected****
[ 101.229921] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.229923] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.230428] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.236486] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.244496] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.251966] [drm:ironlake_dp_detect], DPCD: 0000****[ 101.251973] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1] disconnected****
[ 101.251987] [drm:drm_mode_getconnector], [CONNECTOR:11:?]****[ 101.251991] [drm:drm_helper_probe_single_connector_modes],[CONNECTOR:11:DP-1]****
[ 101.252499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.260459] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.268473] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e****
[ 101.275945] [drm:ironlake_dp_detect], DPCD: 0000****2,925 lines not shown · raw message
Quoted 10 lines
6 lines not shown · raw message
4 lines not shown · raw message
3 lines not shown · raw message
7 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Hi,
here is mine. Let me know if you need any other log.
cheers,
Quoted 8 lines · Daniel Vetter
Quoted 6 lines · Daniel Vetter
Hi all,
To debug modeset issues we usually need a full dmesg with drm.debug=0xe added to the kernel command line. Can you please attach that?
Also, Rodrigo is trying to improve our hdmi/tv support, maybe he's got
an
Quoted 6 lines
Quoted 1 line
idea, cc'ed.
Meh, forgotten to put him actually on cc ;-)
Quoted 2 lines
Yours, Daniel
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
Also, can you add a short list of the modelines you've manually added that work with your TV?
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 1 line
Ok, your TV only reports 1080i as a mode (at least that's the only
thing your kernel can decode).
true, it's non a Full HD TV.
Quoted 1 line
we unfortunately do not yet support interlaced everywhere we could
when do you think the support will be added? weeks? months?
Quoted 1 line
can you add a short list of the modelines you've manually added
that work with your TV?
not sure I understand your question... The TV works with nomodeset and then I tried a bunch of resolutions with xrandr (when running without nomodeset) that ALL didn't work:
I tried some of the modes I got from Xorg.0.log:
[ 88.893] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz) [ 88.893] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 88.893] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz) [ 88.893] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz) [ 88.893] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz) [ 88.893] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz) [ 88.893] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 483 489 525 -hsync -vsync (31.5 kHz) [ 88.893] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 88.893] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 88.893] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz) [ 88.893] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz) [ 88.893] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz) [ 88.893] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz) [ 88.893] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590
1728 288 290 293 312 -hsync -vsync (15.6 kHz)
74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync nothing - blue screen (and now I know why since it's interlaced)
65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync back to the original situation (two bands, flickering)
74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync nothing - blue screen
74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync three bands, flickering
74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync two bands, flickering
27.00 720 732 796 864 576 581 586 625 -hsync -vsync three bands, no flickering
27.00 720 736 798 858 480 483 489 525 -hsync -vsync two bands, no flickering
40.00 800 840 968 1056 600 601 605 628 +hsync +vsync two bands, flickering
27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync strange aspect ratio, the screen is zoomed, no flickering
all this on a Ubuntu 11.10 with kernel 3.2.0-7-generic-pae and X.Org X Server 1.10.4 (xorg-edgers crashes after a few mins for me and doesn't solve the problem: still split-screen).
cheers,
Quoted 15 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
Quoted 9 lines
Also, can you add a short list of the modelines you've manually added that work with your TV?
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hello
Over HDMI works:
"1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
1280x720@50hz (0xb4) 74.2MHz +HSync +VSync *current
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
"1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync
1440x576ix0.0 (0xbd) 27.0MHz -HSync -VSync Interlace *current
h: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 25.0Hz
and
"1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync
Have a lot of horizontal overscan, vertical very small, useless.
It is some time ago, that I compiled kernels myself. I compile drivers regularly. I will have a look next week.
Quoted 5 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since
linux-3.3-rc1 (to be released in a few days) we should be able to decode that.
Can you grab the latest -linus kernel git and try that?
Too many ways described on one page: http://wiki.ubuntuusers.de/Kernel/Kompilierung
Kernel.org links to kernel newbies website. Do you have a link how to compile/install ?
Quoted 1 line
You need to compile a new kernel, the output handling part of the graphics driver is there. Best is to try the latest
drm-intel-fixes tree available
Quoted 1 line
at: https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=shortlog;h=refs/heads/drm-intel-fixes
Can I wait for the ppa:xorg-edgers ?
Angela
From: Alfonso Fiore [mailto:[email protected]]
Sent: 17 January 2012 22:53
To: Daniel Vetter
Cc: Angela Schmid; [email protected]; Rodrigo Vivi
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not working
Quoted 1 line
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode).
true, it's non a Full HD TV.
Quoted 1 line
we unfortunately do not yet support interlaced everywhere we could
when do you think the support will be added? weeks? months?
Quoted 1 line
can you add a short list of the modelines you've manually added that work with your TV?
not sure I understand your question... The TV works with nomodeset and then I tried a bunch of resolutions with xrandr (when running without nomodeset) that ALL didn't work:
I tried some of the modes I got from Xorg.0.log:
[ 88.893] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
(28.1 kHz)
[ 88.893] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 88.893] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync
(33.8 kHz)
[ 88.893] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 88.893] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 88.893] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 88.893] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 483 489 525 -hsync -vsync (31.5 kHz)
[ 88.893] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 88.893] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 88.893] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 88.893] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7
kHz)
[ 88.893] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 88.893] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6
kHz)
[ 88.893] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz)
74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
nothing - blue screen (and now I know why since it's interlaced)
65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
back to the original situation (two bands, flickering)
74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync
nothing - blue screen
74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
three bands, flickering
74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
two bands, flickering
27.00 720 732 796 864 576 581 586 625 -hsync -vsync
three bands, no flickering
27.00 720 736 798 858 480 483 489 525 -hsync -vsync
two bands, no flickering
40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
two bands, flickering
27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync
strange aspect ratio, the screen is zoomed, no flickering
all this on a Ubuntu 11.10 with kernel 3.2.0-7-generic-pae and X.Org X Server 1.10.4 (xorg-edgers crashes after a few mins for me and doesn't solve the problem: still split-screen).
cheers,
On Tue, Jan 17, 2012 at 10:34 PM, Daniel Vetter <[email protected]> wrote:
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
Also, can you add a short list of the modelines you've manually added that work with your TV?
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48 <tel:%2B41%20%280%2979%20365%2057%2048>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 22 lines · Angela Schmid
Over HDMI works:
"1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
1280x720@50hz (
0xb4) 74.2MHz +HSync +VSync *currenth: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
"1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync
1440x576ix0.0 (
0xbd) 27.0MHz -HSync -VSync Interlace *currenth: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 25.0Hz
Quoted 7 lines
and
"1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync
Have a lot of horizontal overscan, vertical very small, useless.
Yeah, many TVs send out a different edid depending upon what connector they are plugged in. Also we currently don't handle overscan compensation at all, Rodrigo is working on that.
Quoted 8 lines
It is some time ago, that I compiled kernels myself. I compile drivers regularly. I will have a look next week.
Quoted 3 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since
linux-3.3-rc1 (to be released in a few days) we should be able to decode that.
Quoted 7 lines
Quoted 1 line
Can you grab the latest -linus kernel git and try that?
Too many ways described on one page: http://wiki.ubuntuusers.de/Kernel/Kompilierung
Kernel.org links to kernel newbies website. Do you have a link how to compile/install ?
Maybe ask on irc about what's suggested. Way back I've used "Die klassische Debian-Methode".
Quoted 6 lines
Quoted 1 line
You need to compile a new kernel, the output handling part of the graphics driver is there. Best is to try the latest
drm-intel-fixes tree available
Quoted 1 line
at: https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=shortlog;h=refs/heads/drm-intel-fixes
Can I wait for the ppa:xorg-edgers ?
If they track drm-intel-fixes, yeah. But you might want to try to compile the kernel, too, in case we have some additional patches for you to apply.
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Hello Daniel
Quoted 3 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
I wanted to remind, that the interlaced modes work with the noveau driver with the 3.0.0 Kernel. Do they ignore the kernel routines and have their own code ?
[ 18.242858] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 18.242861] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 18.242863] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 18.242865] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
At this point, does the drm driver call kernel routines and decide on your mentioned kernel routines return to ignore those modes ?
Angela
Quoted 78 lines
-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: 18 January 2012 00:13
To: Angela Schmid
Cc: 'Alfonso Fiore'; 'Daniel Vetter'; [email protected]; 'Rodrigo Vivi'
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingQuoted 22 lines · Angela Schmid
Over HDMI works:
"1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
1280x720@50hz (
0xb4) 74.2MHz +HSync +VSync *currenth: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
"1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync
1440x576ix0.0 (
0xbd) 27.0MHz -HSync -VSync Interlace *currenth: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 25.0Hz
Quoted 7 lines
and
"1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync
Have a lot of horizontal overscan, vertical very small, useless.
Yeah, many TVs send out a different edid depending upon what connector they are plugged in. Also we currently don't handle overscan compensation at all, Rodrigo is working on that.
Quoted 1 line
It is some time ago, that I compiled kernels myself. I compile drivers regularly. I will have a look next
week.
Quoted 7 lines
Quoted 6 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since
linux-3.3-rc1 (to be released in a few days) we should be able to decode that.
Quoted 7 lines
Quoted 1 line
Can you grab the latest -linus kernel git and try that?
Too many ways described on one page: http://wiki.ubuntuusers.de/Kernel/Kompilierung
Kernel.org links to kernel newbies website. Do you have a link how to compile/install ?
Maybe ask on irc about what's suggested. Way back I've used "Die klassische Debian-Methode".
Quoted 1 line
Quoted 1 line
You need to compile a new kernel, the output handling part of the graphics driver is there. Best is to try
the latest
Quoted 5 lines
drm-intel-fixes tree available
Quoted 1 line
at: https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=shortlog;h=refs/heads/drm-intel-fixes
Can I wait for the ppa:xorg-edgers ?
If they track drm-intel-fixes, yeah. But you might want to try to compile the kernel, too, in case we have some additional patches for you to apply.
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · Angela Schmid
Hello Daniel
Quoted 3 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
I wanted to remind, that the interlaced modes work with the noveau driver with the 3.0.0 Kernel. Do they ignore the kernel routines and have their own code ?
The nouveau driver uses the same core drm support functions for edid parsing. The thing is that for i915 we just haven't implemented interlaced support for all connectors where we could support it. So the core code notices that and rejects the mode.
-Daniel
Quoted 91 lines
[ 18.242858] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125
0x400x15
[ 18.242861] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[ 18.242863] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 11250x480x15
[ 18.242865] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7At this point, does the drm driver call kernel routines and decide on your mentioned kernel routines return to ignore those modes ?
Angela
Quoted 78 lines
-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: 18 January 2012 00:13
To: Angela Schmid
Cc: 'Alfonso Fiore'; 'Daniel Vetter'; [email protected]; 'Rodrigo Vivi'
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingQuoted 22 lines · Angela Schmid
Over HDMI works:
"1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
1280x720@50hz (
0xb4) 74.2MHz +HSync +VSync *currenth: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
"1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync
1440x576ix0.0 (
0xbd) 27.0MHz -HSync -VSync Interlace *currenth: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 25.0Hz
Quoted 7 lines
and
"1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync
Have a lot of horizontal overscan, vertical very small, useless.
Yeah, many TVs send out a different edid depending upon what connector they are plugged in. Also we currently don't handle overscan compensation at all, Rodrigo is working on that.
Quoted 1 line
It is some time ago, that I compiled kernels myself. I compile drivers regularly. I will have a look next
week.
Quoted 7 lines
Quoted 6 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since
linux-3.3-rc1 (to be released in a few days) we should be able to decode that.
Quoted 7 lines
Quoted 1 line
Can you grab the latest -linus kernel git and try that?
Too many ways described on one page: http://wiki.ubuntuusers.de/Kernel/Kompilierung
Kernel.org links to kernel newbies website. Do you have a link how to compile/install ?
Maybe ask on irc about what's suggested. Way back I've used "Die klassische Debian-Methode".
Quoted 1 line
Quoted 1 line
You need to compile a new kernel, the output handling part of the graphics driver is there. Best is to try
the latest
Quoted 5 lines
drm-intel-fixes tree available
Quoted 1 line
at: https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=shortlog;h=refs/heads/drm-intel-fixes
Can I wait for the ppa:xorg-edgers ?
If they track drm-intel-fixes, yeah. But you might want to try to compile the kernel, too, in case we have some additional patches for you to apply.
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
Signature · 2 lines
Daniel Vetter [email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
Quoted 11 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Hi Daniel,
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodeset
If I want to see a video where a progressive resolution brings better results than an interlaced resolution (despite the less pixels) I'd like to be able to.
Right now, with nomodeset I can only play video using VLC which has its own hardware acceleration. With the embedded xbmc player I can't watch any video.
Will a proper way to see 1024x768 be added? kernel 3.0.0-12.20 (Ubuntu 11.10) was working fine with the i3 550.
Should I file a former bug?
thank you,
alfonso
Quoted 13 lines
Your TV likely sends a CEA block with some HDMI default modes set. Since linux-3.3-rc1 (to be released in a few days) we should be able to decode that. Can you grab the latest -linus kernel git and try that?
Also, can you add a short list of the modelines you've manually added that work with your TV?
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
Quoted 13 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Quoted 6 lines
Hi Daniel,
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodeset
Yep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Quoted 10 lines
If I want to see a video where a progressive resolution brings better results than an interlaced resolution (despite the less pixels) I'd like to be able to.
Right now, with nomodeset I can only play video using VLC which has its own hardware acceleration. With the embedded xbmc player I can't watch any video.
Will a proper way to see 1024x768 be added? kernel 3.0.0-12.20 (Ubuntu 11.10) was working fine with the i3 550.
Hm, that smells like a regression. Was this also with nomodeset? -Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 31 lines · Daniel Vetter
Quoted 13 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Quoted 6 lines
Hi Daniel,
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodesetYep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Quoted 4 lines
If I want to see a video where a progressive resolution brings better results than an interlaced resolution (despite the less pixels) I'd like to be able to.
Quoted 8 lines
Quoted 6 lines
Right now, with nomodeset I can only play video using VLC which has its own hardware acceleration. With the embedded xbmc player I can't watch any video.
Will a proper way to see 1024x768 be added? kernel 3.0.0-12.20 (Ubuntu 11.10) was working fine with the i3 550.
Hm, that smells like a regression. Was this also with nomodeset?
Hi Daniel,
I'm 100% sure that it was without nomodeset since I didn't reinstalled Ubuntu when I changed MB. Everything was exactly the same (except for MB and CPU) and I turned it on and had this problem. More than that, Ubuntu 11.10 installation was fine with i3 550 but it shows the bug with i3 2130.
So, if it's the same code, then I think it is a case of regression.
Quoted 5 lines
-Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
Quoted 43 lines · Alfonso Fiore
Quoted 31 lines · Daniel Vetter
Quoted 13 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Quoted 6 lines
Hi Daniel,
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodesetYep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Quoted 4 lines
If I want to see a video where a progressive resolution brings better results than an interlaced resolution (despite the less pixels) I'd like to be able to.
Quoted 8 lines
Quoted 6 lines
Right now, with nomodeset I can only play video using VLC which has its own hardware acceleration. With the embedded xbmc player I can't watch any video.
Will a proper way to see 1024x768 be added? kernel 3.0.0-12.20 (Ubuntu 11.10) was working fine with the i3 550.
Hm, that smells like a regression. Was this also with nomodeset?
Hi Daniel,
Quoted 7 lines
I'm 100% sure that it was without nomodeset since I didn't reinstalled Ubuntu when I changed MB. Everything was exactly the same (except for MB and CPU) and I turned it on and had this problem. More than that, Ubuntu 11.10 installation was fine with i3 550 but it shows the bug with i3 2130.
So, if it's the same code, then I think it is a case of regression.
In that case actually, no. With nomodeset your using the vesa driver which uses bios calls to change the resolution. You've changed the bios with the mb. One of the reasons kms was created is to avoid such issues ;-) -Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 50 lines · Daniel Vetter
Quoted 49 lines · Alfonso Fiore
Quoted 31 lines · Daniel Vetter
Quoted 13 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 3 lines · Alfonso Fiore
Hi,
here is mine. Let me know if you need any other log.
Ok, your TV only reports 1080i as a mode (at least that's the only thing your kernel can decode). The i915 driver then rejects it because it's interlaced (we unfortunately do not yet support interlaced everywhere we could). Which leaves you with no modes, so as a fallback the kernel just adds a bunch of default VGA modes which your TV can't cope with properly.
Quoted 6 lines
Hi Daniel,
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodesetYep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Quoted 4 lines
If I want to see a video where a progressive resolution brings better results than an interlaced resolution (despite the less pixels) I'd like to be able to.
Quoted 8 lines
Quoted 6 lines
Right now, with nomodeset I can only play video using VLC which has its own hardware acceleration. With the embedded xbmc player I can't watch any video.
Will a proper way to see 1024x768 be added? kernel 3.0.0-12.20 (Ubuntu 11.10) was working fine with the i3 550.
Hm, that smells like a regression. Was this also with nomodeset?
Hi Daniel,
I'm 100% sure that it was without nomodeset since I didn't reinstalled Ubuntu when I changed MB. Everything was exactly the same (except for MB and CPU) and I turned it on and had this problem. More than that, Ubuntu 11.10 installation was fine with i3 550 but it shows the bug with i3 2130.
Quoted 5 lines
Quoted 1 line
So, if it's the same code, then I think it is a case of regression.
In that case actually, no. With nomodeset your using the vesa driver which uses bios calls to change the resolution. You've changed the bios with the mb. One of the reasons kms was created is to avoid such issues ;-)
my bad.
sorry,
alfonso
Quoted 5 lines
-Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
Quoted 5 lines · Daniel Vetter
Yep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Ok,
here comes the question:
Peter's patches should be applied only to the mainline development tree:
(git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git).
if I clone the git Daniel suggested I get errors:
(git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux.git)
error: patch failed: drivers/gpu/drm/i915/intel_display.c:5316
error: drivers/gpu/drm/i915/intel_display.c: patch does not apply
I also tried to reapply the patch after branching to drm-intel-fixes but I got an error I don't know how to cope with:
$ git am 152705 152707 152708 previous rebase directory /home/alfonso/kernel/linux/.git/rebase-apply still exists but mbox given.
for now I'm going on compiling mainline (I'll report asap), plus Peter's patches but is there a chance to have Peter's patch for the drm-intel-fixes branch?
what am I missing when I use mainline? I ask this since I have two separate issues...
in the meanline the patches were accepted:
$ git am 152705 152707 152708 Applying: drm/i915: specify vertical timings in frame units for interlaced modes (gen3+) Applying: drm/i915: allow interlaced mode output on the SDVO connector Applying: drm/i915: allow interlaced mode output on the HDMI connector
thank you,
alfonso
Ok,
results from git/torvalds/linux.git plus Peter's patch.
The system boots in 1024x768 with the flickering problem.
Then I manually try to switch to interlaced. I saw from Xorg.0.log (attached) the following two modelines so I tried both:
#Modeline 1920x1080ix0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
#Modeline 1920x1080ix0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
xrandr --newmode "1920x1080i_01" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
xrandr --addmode HDMI2 "1920x1080i_01"
xrandr --output HDMI2 --mode "1920x1080i_01"
xrandr --newmode "1920x1080i_02" 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync
xrandr --addmode HDMI2 "1920x1080i_02"
xrandr --output HDMI2 --mode "1920x1080i_02"
in both cases the resolution change takes effect (I can see that cause I use VNC) but the screen goes blue.
I also attached output dmesg with drm.debug=0xe
any idea?
thank you,
alfonso
Quoted 43 lines · Alfonso Fiore
Quoted 5 lines · Daniel Vetter
Yep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Ok,
here comes the question:
Peter's patches should be applied only to the mainline development tree:
(git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git).if I clone the git Daniel suggested I get errors:
(git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux.git)error: patch failed:
drivers/gpu/drm/i915/intel_display.c:5316
error:drivers/gpu/drm/i915/intel_display.c: patch does not applyI also tried to reapply the patch after branching to drm-intel-fixes but I got an error I don't know how to cope with:
$ git am 152705 152707 152708 previous rebase directory /home/alfonso/kernel/linux/.git/rebase-apply still exists but mbox given.for now I'm going on compiling mainline (I'll report asap), plus Peter's patches but is there a chance to have Peter's patch for the drm-intel-fixes branch?
what am I missing when I use mainline? I ask this since I have two separate issues...
in the meanline the patches were accepted:
$ git am 152705 152707 152708 Applying: drm/i915: specify vertical timings in frame units for interlaced modes (gen3+) Applying: drm/i915: allow interlaced mode output on the SDVO connector Applying: drm/i915: allow interlaced mode output on the HDMI connectorthank you,
alfonso
Quoted 5 lines · Alfonso Fiore
Ok,
results from git/torvalds/linux.git plus Peter's patch.
The system boots in 1024x768 with the flickering problem.
Did you have this problem before you booted with the patched kernel?
Quoted 13 lines
Then I manually try to switch to interlaced. I saw from Xorg.0.log (attached) the following two modelines so I tried both:
#Modeline 1920x1080ix0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
#Modeline 1920x1080ix0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)xrandr --newmode "1920x1080i_01" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
xrandr --addmode HDMI2 "1920x1080i_01"
xrandr --output HDMI2 --mode "1920x1080i_01"
Quoted 7 lines
xrandr --newmode "1920x1080i_02" 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync
xrandr --addmode HDMI2 "1920x1080i_02"
xrandr --output HDMI2 --mode "1920x1080i_02"in both cases the resolution change takes effect (I can see that cause I use VNC) but the screen goes blue.
First things first. The new kernel will automatically detect the modes supported by your TV. So before changing modes run "xrandr -q" to get a list of supported modes. It should list something like 1920x1080 @ 25 Hz or 30 Hz.
Then use xrandr to switch modes. e.g.
xrandr --output HDMI2 --mode 1920x1080 --rate 30
Quoted 1 line
I also attached output dmesg with drm.debug=0xe
The file didnt come through.
-- Peter
(A907 E02F A6E5 0CD2 34CD 20D2 6760 79C5 AC40 DD6B)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): CAO=xpBEM=sMmsp7K3eE3Wh+xFnbJqCeHxkkxqsb=Bt4B5KWvNw@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): 20120119115144.GB1909@9ba4542ee290bef7a68a5eff03328b0e
A message that is not in the archive (sent off-list or not yet received): CAO=xpBFU-WbrLJ9Y_JX=FKaR69N_pR+5RNDMCgHrCB8NY1cJGQ@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): CAO=xpBH+w=cmQ7VWxQPvByBdq145ku7n+2_rXw-PUnR-n6Hd6g@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): 20120120124029.GC14963@9ba4542ee290bef7a68a5eff03328b0e
A message that is not in the archive (sent off-list or not yet received): CAO=xpBGRG7Zk5DXbKLVjuiSAci6C6qa1M04MT2ZJd7RP6f0QHQ@mail.gmail.com
Hello
I tested with the patches applied. Xrandr shows the available interlaced modes automatically.
xrandr --output VGA1 --off
xrandr --output HDMI3 --mode 1920x1080 --rate 25
The television flickers. The lower part of the desktop is visible (lower menu with wastebin) in the upper left quadrant.
I start with VGA1 connected too, so that grub is shown in 1024x768 mode. During boot both flicker, which they didn't before. Both show a desktop in 1024x768 correct. Changing HDMI3 to 1920x1080, the VGA1 stays in the 1024x768 mode, both flicker. With the noveau driver (GTX275) I hadn't any side-effects.
I personally don't need a VGA1 connection, so I disconnected it for my test, see attached logs. If screenshots are welcome, please tell me how.
Yi already mentioned that SandyBridge still has a problem, which I can confirm for my GT2+. Any patches for testing are welcome.
Angela
Settings used:
wget http://paste.debian.net/download/152705
wget http://paste.debian.net/download/152707
wget http://paste.debian.net/download/152708
$ git am 152705 152707 152708 Applying: drm/i915: specify vertical timings in frame units for interlaced modes (gen3+) Applying: drm/i915: allow interlaced mode output on the SDVO connector Applying: drm/i915: allow interlaced mode output on the HDMI connector
Quoted 17 lines
-----Original Message-----
From: Angela Schmid [mailto:[email protected]]
Sent: 20 January 2012 19:07
To: 'Alfonso Fiore'; 'Peter Ross'
Cc: 'Daniel Vetter'; 'Rodrigo Vivi'
Subject: RE: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingHello
From my first mail:
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.
Nvidia noveau with GTX275 (using yellowDVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.
I tried several other modelines, which work for the noveau driver, but not for the intel driver.
The highest resolution possible is "1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
Quoted 54 lines
When using only HDMI grub2 will start in 1080i but xorg is not visible afterwards.
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr -output VGA1 -offAddition:
I hadn't time to test the fixes. I will have a look next week.Angela
Quoted 45 lines
-----Original Message-----
From: Alfonso Fiore [mailto:[email protected]]
Sent: 20 January 2012 13:53
To: Peter Ross
Cc: Daniel Vetter; Rodrigo Vivi; Angela Schmid
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingAngela,
please have a look and comment below.
thanks,
alfonsoQuoted 10 lines · Peter Ross
What concerns me is that some other folk have reported working interlaced output on the Sandy Bridge chipset. So I'm left thinking your TV device may be very fussy about the signal timings, hence why you get a blue 'no signal' screen.
PATCH-v2 has a problem, where the vertical timings are off by two lines (giving 1920x1078i, instead of 1080i). Your TV may reject this mode,
Quoted 7 lines
The enclosed patch corrects this problem. It should be applied on-top of the PATCHv2 set. Rebuild your kernel and try changing to an interlaced mode using xrandr.
Otherwise, we have kind of exhausted all the readily available options here. The next step would be to reverse engineer the Intel windows driver, since you reported it to output 1080i to your TV.
Peter, my apologies if I mislead you.
I've never seen any 1080i resolution on my TV. Maybe Angela did?
I only saw a working 1024x768 resolution (which is now achieved constantly with the hack of connecting both VGA and HDMI cable to the same TV).
Can you please tell me which commands to apply the patch of the patch?
thank you,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Angela,
did you try with the latest patches from Peter?
Peter: any idea for a next step since Angela still experienced the bug?
Thank you,
alfonso
Quoted 100 lines · Angela Schmid
Hello
I tested with the patches applied. Xrandr shows the available interlaced modes automatically.
xrandr --output VGA1 --off
xrandr --output HDMI3 --mode 1920x1080 --rate 25
The television flickers. The lower part of the desktop is visible (lower menu with wastebin) in the upper left quadrant.I start with VGA1 connected too, so that grub is shown in 1024x768 mode. During boot both flicker, which they didn't before. Both show a desktop in 1024x768 correct. Changing HDMI3 to 1920x1080, the VGA1 stays in the 1024x768 mode, both flicker. With the noveau driver (GTX275) I hadn't any side-effects.
I personally don't need a VGA1 connection, so I disconnected it for my test, see attached logs. If screenshots are welcome, please tell me how.
Yi already mentioned that SandyBridge still has a problem, which I can confirm for my GT2+. Any patches for testing are welcome.
Angela
Settings used:
wget http://paste.debian.net/download/152705
wget http://paste.debian.net/download/152707
wget http://paste.debian.net/download/152708$ git am 152705 152707 152708 Applying: drm/i915: specify vertical timings in frame units for interlaced modes (gen3+) Applying: drm/i915: allow interlaced mode output on the SDVO connector Applying: drm/i915: allow interlaced mode output on the HDMI connectorQuoted 71 lines
-----Original Message-----
From: Angela Schmid [mailto:[email protected]]
Sent: 20 January 2012 19:07
To: 'Alfonso Fiore'; 'Peter Ross'
Cc: 'Daniel Vetter'; 'Rodrigo Vivi'
Subject: RE: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingHello
From my first mail:
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.
Nvidia noveau with GTX275 (using yellowDVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.
I tried several other modelines, which work for the noveau driver, but not for the intel driver. The highest resolution possible is "1280x720@50hz" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsyncWhen using only HDMI grub2 will start in 1080i but xorg is not visible afterwards.
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr -output VGA1 -offAddition:
I hadn't time to test the fixes. I will have a look next week.Angela
Quoted 45 lines
-----Original Message-----
From: Alfonso Fiore [mailto:[email protected]]
Sent: 20 January 2012 13:53
To: Peter Ross
Cc: Daniel Vetter; Rodrigo Vivi; Angela Schmid
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingAngela,
please have a look and comment below.
thanks,
alfonsoQuoted 10 lines · Peter Ross
What concerns me is that some other folk have reported working interlaced output on the Sandy Bridge chipset. So I'm left thinking your TV device may be very fussy about the signal timings, hence why you get a blue 'no signal' screen.
PATCH-v2 has a problem, where the vertical timings are off by two lines (giving 1920x1078i, instead of 1080i). Your TV may reject this mode,
Quoted 7 lines
The enclosed patch corrects this problem. It should be applied on-top of the PATCHv2 set. Rebuild your kernel and try changing to an interlaced mode using xrandr.
Otherwise, we have kind of exhausted all the readily available options here. The next step would be to reverse engineer the Intel windows driver, since you reported it to output 1080i to your TV.
Peter, my apologies if I mislead you.
I've never seen any 1080i resolution on my TV. Maybe Angela did?
I only saw a working 1024x768 resolution (which is now achieved constantly with the hack of connecting both VGA and HDMI cable to the same TV).
Can you please tell me which commands to apply the patch of the patch?
thank you,
alfonso
Quoted 5 lines · Alfonso Fiore
Hi Angela,
did you try with the latest patches from Peter?
Peter: any idea for a next step since Angela still experienced the bug?
The next step would be to install Microsoft Windows and the Intel display driver, switch to 1080i mode, and perform a register dump. Microsoft was offering a trial version for download, that'd probably be suffice for testing. The tool to perform register dumps on windows is called 'RW Everything'
(http://jacky5488.myweb.hinet.net/). I can describe the process if you're up for this.
-- Peter
(A907 E02F A6E5 0CD2 34CD 20D2 6760 79C5 AC40 DD6B)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Daniel Vetter
Quoted 4 lines · Alfonso Fiore
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodesetYep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Ok Daniel, I also tested drm-intel-fixes branch (to check if I could get 1024x768p without flickering)
I followed your instructions:
- First checkout Keith's kernel tree:
- git clone git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux.git
- Then checkout the drm-intel-fixes branch with
- git checkout -t origin/drm-intel-fixes
- Confirm with
- git branch
- that you're indeed on the -fixes branch. Then do whatever your distor
- howto tells you to compile a kernel from sources.
after reboot I see yet an other behavior.
LightDM shows an odd resolution. Not flickering but oddly placed and definitely not usable.
After login the screen goes black (interestingly, not blue like when I try 1920x1080i)
I logged in with VNC and tried to switch to 1024x768p with xrandr:
xrandr --newmode "1024x768_01" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
xrandr --addmode HDMI2 "1024x768_01"
xrandr --output HDMI2 --mode "1024x768_01"
but nothing changes.
Recap: original kernel: two half screens flickering latest drm-intel-fixes branch: black screen
attached dmesg.output and Xorg.0.log
thank you,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 40 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 4 lines · Alfonso Fiore
would you agree that these are two separate bugs? I'd like the Intel driver to both:
- allow me to use 1920x1080i
- allow me to use 1024x768p without reverting to nomodesetYep, that's correct. For the first issue Peter Ross is working on some patches, for the later I suspect the missing CEA support. Please try this out by grabbing the kernel tree I've told you and running it. Peter's patches are on this mailing list, if it's easier for you I could create a quick git branch somewhere.
Ok Daniel, I also tested drm-intel-fixes branch (to check if I could get 1024x768p without flickering)
I followed your instructions:
- First checkout Keith's kernel tree:
- git clonegit://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux.git
- Then checkout the drm-intel-fixes branch with
- git checkout -t origin/drm-intel-fixes
- Confirm with
- git branch
- that you're indeed on the -fixes branch. Then do whatever your distor
- howto tells you to compile a kernel from sources.after reboot I see yet an other behavior.
LightDM shows an odd resolution. Not flickering but oddly placed and definitely not usable.
After login the screen goes black (interestingly, not blue like when I try 1920x1080i)
I logged in with VNC and tried to switch to 1024x768p with xrandr:xrandr --newmode "1024x768_01" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
xrandr --addmode HDMI2 "1024x768_01"
xrandr --output HDMI2 --mode "1024x768_01"
Quoted 6 lines
but nothing changes.
Recap: original kernel: two half screens flickering latest drm-intel-fixes branch: black screen
attached dmesg.output and Xorg.0.log
It looks like we indeed detect more modes, unfortunately all the high-res ones are interlaced. So you won't get anything new without Peter's interlaced patches.
Also please don't add any modes with xrandr (or in your xorg.conf) and try to reset any other xrandr tools that might change your mode when logging in. It's rather likely that your TV is really picky about the mode, so if you don't get it exactly right it'll bail out. xrandr should show you all the detected (and by i915 supported modes).
Also, can you describe "oddly placed" more precisely (maybe with a pic)?
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 6 lines · Daniel Vetter
Also please don't add any modes with xrandr (or in your xorg.conf) and try to reset any other xrandr tools that might change your mode when logging in. It's rather likely that your TV is really picky about the mode, so if you don't get it exactly right it'll bail out. xrandr should show you all the detected (and by i915 supported modes).
Ok, so can you please tell me which are the right commands to list accepted resolutions and which command to switch? Maybe I misunderstand, but I should be able to run 1024x768 which is not interlaced.
Quoted 1 line
Also, can you describe "oddly placed" more precisely (maybe with a pic)?
attached the two pictures of LightDM, with and without nomodeset with kernel keithp plus drm-intel-fixes (without Peter's patch for interlaced).
thank you for your help,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Alfonso Fiore
Quoted 6 lines · Daniel Vetter
Also please don't add any modes with xrandr (or in your xorg.conf) and try to reset any other xrandr tools that might change your mode when logging in. It's rather likely that your TV is really picky about the mode, so if you don't get it exactly right it'll bail out. xrandr should show you all the detected (and by i915 supported modes).
Quoted 4 lines
Ok, so can you please tell me which are the right commands to list accepted resolutions and which command to switch? Maybe I misunderstand, but I should be able to run 1024x768 which is not interlaced.
As Peter said
$ xrandr -q
will show all modes detected and the current configuration. Then use the normal xrandr commands to select your desired resolution. Also can you attach full dmesg with drm.debug=0xe again, the one you've attached is missing a few things at the top. Maybe your kernel dmesg buffer is too small. You can adjust that size with log_buf_len=2M or so on the kernel cmdline.
Quoted 5 lines
Quoted 1 line
Also, can you describe "oddly placed" more precisely (maybe with a pic)?
attached the two pictures of LightDM, with and without nomodeset with kernel keithp plus drm-intel-fixes (without Peter's patch for interlaced).
This looks like overscan/scaling-comp gone wrong (but I haven't ever seen that in practice, so not much clue). Rodrigo is working on patches to add support for overscan comp, maybe he has a few patches for you to try.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
A message that is not in the archive (sent off-list or not yet received): CAO=xpBG460JGP=b05yqnbK6+-F1LtudwekQ7H-AiarOcOxRqCg@mail.gmail.com
Quoted 21 lines · Alfonso Fiore
Quoted 12 lines · Daniel Vetter
$ xrandr -qwill show all modes detected and the current configuration. Then use the normal xrandr commands to select your desired resolution. Also can you attach full dmesg with drm.debug=0xe again, the one you've attached is missing a few things at the top. Maybe your kernel dmesg buffer is too small. You can adjust that size with log_buf_len=2M or so on the kernel cmdline.
Quoted 2 lines
Quoted 1 line
Also, can you describe "oddly placed" more precisely (maybe with a pic)?
Quoted 7 lines
Quoted 3 lines
attached the two pictures of LightDM, with and without nomodeset with kernel keithp plus drm-intel-fixes (without Peter's patch for interlaced).
This looks like overscan/scaling-comp gone wrong (but I haven't ever seen that in practice, so not much clue). Rodrigo is working on patches to add support for overscan comp, maybe he has a few patches for you to try.
Quoted 8 lines
Ok,
so I attached the new logs and also a screenshot of how my desktop looks like and always looked like with Sandy Bridge if I don't use nomodeset. Some kernels make it flicker, but not this one.
also, how to change resolution after xrandr -q? I only learned how to do it in the way I showed earlier.
Like Peter said:
$ xrandr --output <output> --mode <mode>
Quoted 1 line
the output of xrandr is in the logs too.
Couldn't find it, it looks like the old targz with the cut-off dmesg. -Daniel
PS: Putting the list back on cc. Please don't drop things from cc. Also for quick question it's easier if you prod us on irc, #intel-gfx on freenode.
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 11 lines · Daniel Vetter
Quoted 9 lines · Alfonso Fiore
Ok,
so I attached the new logs and also a screenshot of how my desktop looks like and always looked like with Sandy Bridge if I don't use nomodeset. Some kernels make it flicker, but not this one.
also, how to change resolution after xrandr -q? I only learned how to do it in the way I showed earlier.
Quoted 8 lines
Like Peter said:
$ xrandr --output <output> --mode <mode>Quoted 1 line
the output of xrandr is in the logs too.
Couldn't find it, it looks like the old targz with the cut-off dmesg. -Daniel
Hi Daniel,
Are you sure the attached logs are not ok? I downloaded them a couple of times and I can see three files inside the tgz:
- xrandr-q.log (output of xrandr -q)
- Xorg.0.log
- dmesg.output
dmesg starts with:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-drm-intel-fixes+ (root@NAS) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Thu Jan 19 10:22:25 CET 2012 [ 0.000000] KERNEL supported cpus:
So I guess that's the beginning.
Let me know if there is anything else I can do.
I think there are no more pending tests you requests. I'll wait for further instructions and/or patches to test.
thank you,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 21 lines · Alfonso Fiore
Quoted 11 lines · Daniel Vetter
Quoted 9 lines · Alfonso Fiore
Ok,
so I attached the new logs and also a screenshot of how my desktop looks like and always looked like with Sandy Bridge if I don't use nomodeset. Some kernels make it flicker, but not this one.
also, how to change resolution after xrandr -q? I only learned how to do it in the way I showed earlier.
Quoted 8 lines
Like Peter said:
$ xrandr --output <output> --mode <mode>Quoted 1 line
the output of xrandr is in the logs too.
Couldn't find it, it looks like the old targz with the cut-off dmesg. -Daniel
Quoted 7 lines
Hi Daniel,
Are you sure the attached logs are not ok? I downloaded them a couple of times and I can see three files inside the tgz:
- xrandr-q.log (output of xrandr -q)
- Xorg.0.log
- dmesg.output
Hm, looks like I've looked at the wrong tgz, sorry for the mess ;-)
Quoted 10 lines
dmesg starts with:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-drm-intel-fixes+ (root@NAS) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Thu Jan 19 10:22:25 CET 2012 [ 0.000000] KERNEL supported cpus:So I guess that's the beginning.
Yep, logs good. We also seemed to parse the edid correctly.
Quoted 3 lines
Let me know if there is anything else I can do.
I think there are no more pending tests you requests. I'll wait for further instructions and/or patches to test.
Yeah, unfortunately Peter's interlaced patches have issues still on Sandybridge. Meanwhile you could try out all the modes the kernel detected from the edid with xrandr (also see whether picking a different refresh rate with --rate changes anything). If any of them work correctly (instead of the cut-in-half or tiny screen), that might be interesting to know.
Maybe also attach the raw edid, you can find it in /sys/class/drm/*/edid for your TV.
Thanks, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 6 lines · Daniel Vetter
Yeah, unfortunately Peter's interlaced patches have issues still on Sandybridge. Meanwhile you could try out all the modes the kernel detected from the edid with xrandr (also see whether picking a different refresh rate with --rate changes anything). If any of them work correctly (instead of the cut-in-half or tiny screen), that might be interesting to know.
Hi,
more tests with the drm-intel-fixes and no "nomoreset".
I boot (as usual) just with HDMI cable.
The PC boots in that weird way (I sent photos today) and then when I login the screen is split.
Interestingly, trying to connect the same screen over VGA (while running and already connected over HDMI) makes X hang BUT it also changes the way X shows: full screen, no flicker (i.e. as it should).
when I restart X (sudo restart lightdm) I have a FANTASTIC PERFECT SCREEN! :) :)
$ xrandr -q Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 400mm x 300mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) HDMI2 connected 1024x768+0+0 (normal left inverted right x axis y axis) 640mm x 360mm 1280x720 50.0 60.0 1024x768 60.0* 800x600 60.3 720x576 50.0 720x480 59.9 59.9 640x480 60.0 59.9 HDMI3 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis)
2nd test: I reboot again just with HDMI connected.
LightDM still looking "weird" (like today's picture) and after login still split screen.
When I plug the VGA cable (over DVI-I) the screen goes black (not blue). If I restart X the screen goes blue and then black and from VNC I can see it's still 1024x768 (so why black?).
xrandr -q didn't change.
if I turn the TV over the VGA signal I get a very weird full green image flickering very fast.
3rd test: I reboot again with both cables connected (VGA over DVI-I and HDMI).
LightDM and X looks PERFECT! :) Both login screen and session looks just like they should.
4rd test: same as previous but I want to check if it will happen the same way.
Yes, again, LightDM and X looks PERFECT! Interestingly, if on the TV I switch to VGA input I see a black screen...
I attach the logs for this session, maybe you can figure out how to have this behavior without VGA cable plugged in!
about testing different resolutions. If I test them from THIS situation (e.g. both cables connected from boot) I report the following:
xrandr --output HDMI2 --mode 1280x720 ===> I get quite a bit overscan but the picture is stable
xrandr --output HDMI2 --mode 1024x768 ===> fits like a glove. Not a pixel of overscan. Never had such a good fit over VGA with my laptop and XP.
xrandr --output HDMI2 --mode 800x600 ===> this is quite hard to explain. The "real" screen is 1024x768 but I can only see 800x600 but X seems to know what's going on because it creates two sets of controls, one aligned at 800, one aligned at 1024.
I guess the two screenshots will help you (one of the TV screen and then a screen grab).
Quoted 2 lines
Maybe also attach the raw edid, you can find it in
/sys/class/drm/*/edidfor your TV.
about my edid info:
$ find /sys/ | grep edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-3/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-2/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-3/edid
Interestingly enough the EDID I get from VGA is 256 bytes while EDID from HDMI is 128 bytes...
They are both in the logs.
hope this helps you help me,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 14 lines · Alfonso Fiore
Quoted 6 lines · Daniel Vetter
Yeah, unfortunately Peter's interlaced patches have issues still on Sandybridge. Meanwhile you could try out all the modes the kernel detected from the edid with xrandr (also see whether picking a different refresh rate with --rate changes anything). If any of them work correctly (instead of the cut-in-half or tiny screen), that might be interesting to know.
Hi,
more tests with the drm-intel-fixes and no "nomoreset".
I boot (as usual) just with HDMI cable.
Quoted 8 lines
The PC boots in that weird way (I sent photos today) and then when I login the screen is split.
Interestingly, trying to connect the same screen over VGA (while running and already connected over HDMI) makes X hang BUT it also changes the way X shows: full screen, no flicker (i.e. as it should).
when I restart X (sudo restart lightdm) I have a FANTASTIC PERFECT SCREEN! :) :)
Ok, please make this _really_ precise, we need to know exactly when things work and when not. I presume this was showing a perfect screen over the HDMI cable?
Also please recheck for the split-screen issue whether that is some custom mode still lingering around by pasting xrandr -q output. For the broken case (i.e. only HDMI connected) also please try to change the resolution to something else like 1024x768 and see what happens.
Quoted 51 lines
$ xrandr -q Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 400mm x 300mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) HDMI2 connected 1024x768+0+0 (normal left inverted right x axis y axis) 640mm x 360mm 1280x720 50.0 60.0 1024x768 60.0* 800x600 60.3 720x576 50.0 720x480 59.9 59.9 640x480 60.0 59.9 HDMI3 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis)2nd test: I reboot again just with HDMI connected.
LightDM still looking "weird" (like today's picture) and after login still split screen.
When I plug the VGA cable (over DVI-I) the screen goes black (not blue). If I restart X the screen goes blue and then black and from VNC I can see it's still 1024x768 (so why black?).xrandr -q didn't change.
if I turn the TV over the VGA signal I get a very weird full green image flickering very fast.
3rd test: I reboot again with both cables connected (VGA over DVI-I and HDMI).
LightDM and X looks PERFECT! :) Both login screen and session looks just like they should.
4rd test: same as previous but I want to check if it will happen the same way.
Yes, again, LightDM and X looks PERFECT! Interestingly, if on the TV I switch to VGA input I see a black screen...
I attach the logs for this session, maybe you can figure out how to have this behavior without VGA cable plugged in!
about testing different resolutions. If I test them from THIS situation (e.g. both cables connected from boot) I report the following:
Quoted 9 lines
xrandr --output HDMI2 --mode 1280x720 ===> I get quite a bit overscan but the picture is stable
xrandr --output HDMI2 --mode 1024x768 ===> fits like a glove. Not a pixel of overscan. Never had such a good fit over VGA with my laptop and XP.
xrandr --output HDMI2 --mode 800x600 ===> this is quite hard to explain. The "real" screen is 1024x768 but I can only see 800x600 but X seems to know what's going on because it creates two sets of controls, one aligned at 800, one aligned at 1024.
I suspect you've had the other output still on with 1024x768. You can always double-check with xrandr, '*' marks the currently active mode (and at the top of each output you see which part of a possibly large desktop it scans out).
Quoted 17 lines
I guess the two screenshots will help you (one of the TV screen and then a screen grab).
Quoted 2 lines
Maybe also attach the raw edid, you can find it in
/sys/class/drm/*/edidfor your TV.about my edid info:
$ find /sys/ | grep edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-3/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-2/edid /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-3/edid
Quoted 2 lines
Interestingly enough the EDID I get from VGA is 256 bytes while EDID from HDMI is 128 bytes...
Yeah, that's common TV edid madness, they give you different stuff depending upon connector. Sometimes you get only TV-y modes on HDMI and all the default *VGA resolutions only on the dvi/vga port.
Usually this is also good to explain the difference in overscan. For standard TV resolutions you get overscan, for *VGA resolutions you don't.
Add to that the fact that some of the receivers in TV's are dirt-cheap and _only_ work with exactly the mode they spec in the edid. The result is what you've discovered ;-)
Quoted 1 line
They are both in the logs.
A few other things to test.
- Check whether the edid changes when you connect only one cable. Yep, that can happen.
- Check what happens when you only connect the VGA cable.
- There's likely something broken within our driver if HDMI+VGA works, but HDMI alone not. The kernel/X also switch on the VGA output which might influence (but shouldn't) how we set up HDMI. To check that out please:
Attach xrandr --verbose output for both configurations. Please ensure that you use the same resolution for both, i.e. for the HDMI+VGA case switch to 1280x720 for the HDMI output.
Grab intel-gpu-tools v1.1 (hopefully your distro ships it) and run the intel_reg_dumper tool for both configurations (again, please ensure you use the same mode for HDMI and that you don't change anything between grabbing the xrandr output and the intel_reg_dumper output).
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 5 lines · Daniel Vetter
Grab intel-gpu-tools v1.1 (hopefully your distro ships it) and run the
intel_reg_dumpertool for both configurations (again, please ensure you use the same mode for HDMI and that you don't change anything between grabbing the xrandr output and theintel_reg_dumperoutput).
Quickly before I start running all the tests:
can you share how to compile intel-gpu-tools v1.1?
Is source better
wget http://cgit.freedesktop.org/xorg/app/intel-gpu-tools/snapshot/intel-gpu-tools-1.1.tar.gz
or
git clone git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
how to compile from either one?
I have intel_reg_dumper but since intel-gpu-tools v1.1 were released 4 weeks ago I'm sure they are not in my ubuntu.
Plus man intel_reg_dumper says in the bottom intel_reg_dumper 1.0. Should I remove the previous version before compiling the new one? how?
or can I simply use 1.0?
thanks,
alfonso
Quoted 7 lines · Alfonso Fiore
Quoted 5 lines · Daniel Vetter
Grab intel-gpu-tools v1.1 (hopefully your distro ships it) and run the
intel_reg_dumpertool for both configurations (again, please ensure you use the same mode for HDMI and that you don't change anything between grabbing the xrandr output and theintel_reg_dumperoutput).
Quoted 7 lines
Quickly before I start running all the tests:
can you share how to compile intel-gpu-tools v1.1?
Is source better
wget http://cgit.freedesktop.org/xorg/app/intel-gpu-tools/snapshot/intel-gpu-tools-1.1.tar.gz
or
git clonegit://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Latest git is always good. You can just compile it with
$ ./autogen.sh && make
and then use the tool without installing it:
# tools/intel_reg_dumper
Quoted 9 lines
how to compile from either one?
I have
intel_reg_dumperbut since intel-gpu-tools v1.1 were released 4 weeks ago I'm sure they are not in my ubuntu.
Plus manintel_reg_dumpersays in the bottomintel_reg_dumper1.0. Should I remove the previous version before compiling the new one? how?or can I simply use 1.0?
That one's too old.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 8 lines · Daniel Vetter
Latest git is always good. You can just compile it with
$ ./autogen.sh && makeand then use the tool without installing it:
# tools/intel_reg_dumper
great.
Just for reference, to compile from the source I followed this:
http://intellinuxgraphics.org/intel-gpu-dump.html (but skip make install)
but I needed a bunch of libraries (on Ubuntu 11.10):
sudo apt-get install autoconf libtool xutils-dev libdrm-dev libpciaccess-dev
Do you mind checking the test intel_reg_dumper.output I'm attaching? So I can get started on all the tests.
thank you,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 12 lines · Alfonso Fiore
Quoted 8 lines · Daniel Vetter
Latest git is always good. You can just compile it with
$ ./autogen.sh && makeand then use the tool without installing it:
# tools/intel_reg_dumpergreat.
Quoted 8 lines
Just for reference, to compile from the source I followed this:
http://intellinuxgraphics.org/intel-gpu-dump.html (but skip make install)but I needed a bunch of libraries (on Ubuntu 11.10):
sudo apt-get install autoconf libtool xutils-dev libdrm-dev libpciaccess-devDo you mind checking the test intel_reg_dumper.output I'm attaching? So I can get started on all the tests.
Yep, that's it.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 4 lines · Daniel Vetter
Ok, please make this _really_ precise, we need to know exactly when things work and when not. I presume this was showing a perfect screen over the HDMI cable?
Yes, I was referring to HDMI. In fact, I was never able to see anything over VGA with this MB + CPU (I never tried VGA with H55 + i3 550 cause HDMI worked but I used VGA from my laptop with the same cable and the same TV). Interestingly, I can always see BIOS and BIOS menu over HDMI
but when I connect only VGA I can't see anything also at the BIOS level. So maybe the VGA problem has nothing to do with the driver?
[I was wrong, I managed to see something over VGA during these tests]
I'll try to be as precise as I can.
so I created a little script that I will run at each test.
$ cat run_me.sh #!/bin/bash WHEN="`date +%Y%m%d_%H%M%S`" xrandr -q > ./xrand-q.$WHEN.output xrandr --verbose > ./xrand--verbose.$WHEN.output dmesg > ./dmesg.$WHEN.output cp /var/log/Xorg.0.log ./Xorg.0.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid ./EDID_VGA.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid ./EDID_HDMI.$WHEN.output $HOME/test_GPU/intel_gpu_tools/intel-gpu-tools-1.1/tools/intel_reg_dumper
Quoted 1 line
./intel_reg_dumper.$WHEN.output
And attached you can find the whole tgz. Here I simply walk you through my tests.
TEST-01
========
Only VGA (DVI-I) connected.
Changing TV source to VGA.
Reboot.
Nothing shows on the screen (not even BIOS).
But LightDM started (I can connect with VNC).
FOLDER=VGA_cable_VGA_source_1024_768
TEST-02
========
NO reboot
NO cable change (Only VGA (DVI-I) connected and TV source to VGA) xrandr --output VGA1 --mode 800x600 (from VNC)
well... amazing. I can see the screen. I get no overscan left/right but a bit up/down
FOLDER=VGA_cable_VGA_source_800_600
TEST-03
========
connecting both VGA and HDMI
reboot
TV source still on VGA so I don't see anything (blue screen) connecting over VNC I can see screen is 1024x768 FOLDER=VGA_HDMI_cables_VGA_source_1024x768
TEST-04
========
NO reboot
NO cable change
NO TV source change
xrandr --output VGA1 --mode 800x600 (from VNC)
the screen goes from blue to the actual desktop,
but the TV shows 800x600 while the resolution stays at 1024x768 so there is huge overscan at bottom and right plus a bit on the top. FOLDER=VGA_HDMI_cables_VGA_source_800x600
since you said "Please ensure that you use the same resolution for both" (but I have a feeling I didn't understand you)
I'll put this back to 1024x768 before running tests on HDMI xrandr --output VGA1 --mode 1024x768 (from VNC)
the screen goes back to blue
TEST-05
========
NO reboot
NO cable change
TV source change from TV to HDMI
the screen is as expected perfect with not a pixel of overscan FOLDER=VGA_HDMI_cables_HDMI_source_1024x768
TEST-06
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 1280x720 (from VNC) the screen shows but with overscan on all four edges FOLDER=VGA_HDMI_cables_HDMI_source_1280x720
TEST-07
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 800x600 (from VNC)
this is similar to what happened over VGA:
the desktop stays 1024x768 but the TV only shows 800x600 so huge overscan bottom and right FOLDER=VGA_HDMI_cables_HDMI_source_800x600
when I removed the VGA cable for the next tests the screen automatically switched to 1024x768
I run the script again just in case it gives you some good info:
FOLDER=HDMI_cable_HDMI_source_1024x768_after_disconnect_VGA
TEST-08
========
connecting only HDMI
reboot
login screen is "weird" (I sent the photo already)
Ah, I didn't realize this earlier! From VNC I see that lightDM is running at 1280x720 when it looks "weird"
when I type my password the screen goes to 1024x768 and now it's black (used to be cut in half) FOLDER=HDMI_cable_HDMI_source_1024x768
TEST-09
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 1280x720 (from VNC)
weird! The screen stays black (so it doesn't look like the login screen) the desktop (from VNC) correctly resizes to 1280x720 FOLDER=HDMI_cable_HDMI_source_1280x720
TEST-10
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 800x600 (from VNC) black screen
the desktop (from VNC) correctly resizes to 800x600 FOLDER=HDMI_cable_HDMI_source_800x600
I believe I follow your instructions on what info to give you.
I hope this will help you trace the bug.
cheers,
alfonso
Quoted 29 lines
Also please recheck for the split-screen issue whether that is some custom mode still lingering around by pasting xrandr -q output. For the broken case (i.e. only HDMI connected) also please try to change the resolution to something else like 1024x768 and see what happens.
I suspect you've had the other output still on with 1024x768. You can always double-check with xrandr, '*' marks the currently active mode (and at the top of each output you see which part of a possibly large desktop it scans out).
A few other things to test.
- Check whether the edid changes when you connect only one cable. Yep, that can happen.
- Check what happens when you only connect the VGA cable.
- There's likely something broken within our driver if HDMI+VGA works, but HDMI alone not. The kernel/X also switch on the VGA output which might influence (but shouldn't) how we set up HDMI. To check that out please:Attach xrandr --verbose output for both configurations. Please ensure that you use the same resolution for both, i.e. for the HDMI+VGA case switch to 1280x720 for the HDMI output.
Grab intel-gpu-tools v1.1 (hopefully your distro ships it) and run the
intel_reg_dumpertool for both configurations (again, please ensure you use the same mode for HDMI and that you don't change anything between grabbing the xrandr output and theintel_reg_dumperoutput).
Quoted 5 lines
Yours, Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 44 lines · Alfonso Fiore
Quoted 4 lines · Daniel Vetter
Ok, please make this _really_ precise, we need to know exactly when things work and when not. I presume this was showing a perfect screen over the HDMI cable?
Yes, I was referring to HDMI. In fact, I was never able to see anything over VGA with this MB + CPU (I never tried VGA with H55 + i3 550 cause HDMI worked but I used VGA from my laptop with the same cable and the same TV). Interestingly, I can always see BIOS and BIOS menu over HDMI
but when I connect only VGA I can't see anything also at the BIOS level. So maybe the VGA problem has nothing to do with the driver?
[I was wrong, I managed to see something over VGA during these tests]I'll try to be as precise as I can.
so I created a little script that I will run at each test.
$ cat run_me.sh #!/bin/bash WHEN="`date +%Y%m%d_%H%M%S`" xrandr -q > ./xrand-q.$WHEN.output xrandr --verbose > ./xrand--verbose.$WHEN.output dmesg > ./dmesg.$WHEN.output cp /var/log/Xorg.0.log ./Xorg.0.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid ./EDID_VGA.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid ./EDID_HDMI.$WHEN.output $HOME/test_GPU/intel_gpu_tools/intel-gpu-tools-1.1/tools/intel_reg_dumperQuoted 1 line
./intel_reg_dumper.$WHEN.output
And attached you can find the whole tgz. Here I simply walk you through my tests.
TEST-01
========
Only VGA (DVI-I) connected.
Changing TV source to VGA.
Reboot.
Nothing shows on the screen (not even BIOS).
But LightDM started (I can connect with VNC).
FOLDER=VGA_cable_VGA_source_1024_768
Quoted 8 lines
TEST-02
========
NO reboot
NO cable change (Only VGA (DVI-I) connected and TV source to VGA) xrandr --output VGA1 --mode 800x600 (from VNC)
well... amazing. I can see the screen. I get no overscan left/right but a bit up/down
FOLDER=VGA_cable_VGA_source_800_600
Ok, from the above it looks like the VGA input on your TV is dirt-cheap and it barely manages to sync at 800x600 and fails already at 1024x768 - not even the bios manages to put a picture on your TV :(
To make sure that this is not an issue with the intel gpu, can you maybe test the vga input with another machine with different gpu?
Quoted 8 lines
TEST-03
========
connecting both VGA and HDMI
reboot
TV source still on VGA so I don't see anything (blue screen) connecting over VNC I can see screen is 1024x768 FOLDER=VGA_HDMI_cables_VGA_source_1024x768
Quoted 10 lines
TEST-04
========
NO reboot
NO cable change
NO TV source change
xrandr --output VGA1 --mode 800x600 (from VNC)
the screen goes from blue to the actual desktop,
but the TV shows 800x600 while the resolution stays at 1024x768 so there is huge overscan at bottom and right plus a bit on the top. FOLDER=VGA_HDMI_cables_VGA_source_800x600
The overscan is expected because your other output HDMI is still at 1024x768 and hence your desktop is large enough to fit both.
See the first line starting with "Screen 0:" in the xrandr output for current the size of your desktop.
Quoted 23 lines
since you said "Please ensure that you use the same resolution for both" (but I have a feeling I didn't understand you)
I'll put this back to 1024x768 before running tests on HDMI xrandr --output VGA1 --mode 1024x768 (from VNC)
the screen goes back to blueTEST-05
========
NO reboot
NO cable change
TV source change from TV to HDMI
the screen is as expected perfect with not a pixel of overscan FOLDER=VGA_HDMI_cables_HDMI_source_1024x768TEST-06
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 1280x720 (from VNC) the screen shows but with overscan on all four edges FOLDER=VGA_HDMI_cables_HDMI_source_1280x720
Quoted 10 lines
TEST-07
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 800x600 (from VNC) this is similar to what happened over VGA:
the desktop stays 1024x768 but the TV only shows 800x600 so huge overscan bottom and right FOLDER=VGA_HDMI_cables_HDMI_source_800x600
Same as above I suspect.
Quoted 36 lines
when I removed the VGA cable for the next tests the screen automatically switched to 1024x768
I run the script again just in case it gives you some good info:
FOLDER=HDMI_cable_HDMI_source_1024x768_after_disconnect_VGATEST-08
========
connecting only HDMI
reboot
login screen is "weird" (I sent the photo already)
Ah, I didn't realize this earlier! From VNC I see that lightDM is running at 1280x720 when it looks "weird"
when I type my password the screen goes to 1024x768 and now it's black (used to be cut in half) FOLDER=HDMI_cable_HDMI_source_1024x768TEST-09
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 1280x720 (from VNC)
weird! The screen stays black (so it doesn't look like the login screen) the desktop (from VNC) correctly resizes to 1280x720 FOLDER=HDMI_cable_HDMI_source_1280x720TEST-10
========
NO reboot
NO cable change
NO TV source change
xrandr --output HDMI2 --mode 800x600 (from VNC) black screen
the desktop (from VNC) correctly resizes to 800x600 FOLDER=HDMI_cable_HDMI_source_800x600
Quoted 1 line
I believe I follow your instructions on what info to give you.
Yep, excellent test descriptions! I still need to look at the register dumps, but I think another test might be useful:
Only HDMI with nomodeset, then again grab the intel_reg_dump. Iirc that works, so it could be useful to see how the bios sets things up with just the hdmi cable.
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 54 lines · Daniel Vetter
Quoted 44 lines · Alfonso Fiore
Quoted 4 lines · Daniel Vetter
Ok, please make this _really_ precise, we need to know exactly when things work and when not. I presume this was showing a perfect screen over the HDMI cable?
Yes, I was referring to HDMI. In fact, I was never able to see anything over VGA with this MB + CPU (I never tried VGA with H55 + i3 550 cause HDMI worked but I used VGA from my laptop with the same cable and the same TV). Interestingly, I can always see BIOS and BIOS menu over HDMI
but when I connect only VGA I can't see anything also at the BIOS level. So maybe the VGA problem has nothing to do with the driver?
[I was wrong, I managed to see something over VGA during these tests]I'll try to be as precise as I can.
so I created a little script that I will run at each test.
$ cat run_me.sh #!/bin/bash WHEN="`date +%Y%m%d_%H%M%S`" xrandr -q > ./xrand-q.$WHEN.output xrandr --verbose > ./xrand--verbose.$WHEN.output dmesg > ./dmesg.$WHEN.output cp /var/log/Xorg.0.log ./Xorg.0.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid ./EDID_VGA.$WHEN.output cp /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid ./EDID_HDMI.$WHEN.output $HOME/test_GPU/intel_gpu_tools/intel-gpu-tools-1.1/tools/intel_reg_dumperQuoted 1 line
./intel_reg_dumper.$WHEN.output
And attached you can find the whole tgz. Here I simply walk you through my tests.
TEST-01
========
Only VGA (DVI-I) connected.
Changing TV source to VGA.
Reboot.
Nothing shows on the screen (not even BIOS).
But LightDM started (I can connect with VNC).
FOLDER=VGA_cable_VGA_source_1024_768Quoted 8 lines
TEST-02
========
NO reboot
NO cable change (Only VGA (DVI-I) connected and TV source to VGA) xrandr --output VGA1 --mode 800x600 (from VNC)
well... amazing. I can see the screen. I get no overscan left/right but a bit up/down
FOLDER=VGA_cable_VGA_source_800_600
Quoted 6 lines
Ok, from the above it looks like the VGA input on your TV is dirt-cheap and it barely manages to sync at 800x600 and fails already at 1024x768 - not even the bios manages to put a picture on your TV :(
To make sure that this is not an issue with the intel gpu, can you maybe test the vga input with another machine with different gpu?
Another thing to try with VGA is whether the higher refresh-rate helps. You can select that with --rate, i.e.
xrandr --output VGA1 --mode 1024x768 --rate 60.0
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 7 lines · Daniel Vetter
Ok, from the above it looks like the VGA input on your TV is dirt-cheap and it barely manages to sync at 800x600 and fails already at 1024x768 - not even the bios manages to put a picture on your TV :(
To make sure that this is not an issue with the intel gpu, can you maybe test the vga input with another machine with different gpu?
Hi Daniel,
I used this TV for the last 3 years connecting each and all my laptops and I never had a problem running 1024x768 with Windows over VGA (as an extension of my laptop).
However cheap my VGA input might be, Windows handles it just fine. My current GPU is ATI mobility radeon HD 3400.
If you want, I can try to run Ubuntu from USB on my laptop and see if Ubuntu can control my monitor over VGA.
Let me know if this test helps at all (I would prefer to skip it if the info I provided are enough).
I don't have other desktops.
The only box I can try for POST over VGA is an ALIX
(http://pcengines.ch/) and it also doesn't work very well with my TV but at least it shows a flickering image.
Again, with laptops and Windows it has been running fine for ages over VGA.
Also: I'm sure you are looking at the big picture, but my goal is for sure HDMI, not VGA.
Quoted 5 lines
The overscan is expected because your other output HDMI is still at 1024x768 and hence your desktop is large enough to fit both.
See the first line starting with "Screen 0:" in the xrandr output for current the size of your desktop.
gotcha. Thanks. I didn't know that (but I could have thought about it...)
Quoted 6 lines
Yep, excellent test descriptions! I still need to look at the register dumps, but I think another test might be useful:
Only HDMI with nomodeset, then again grab the
intel_reg_dump. Iirc that works, so it could be useful to see how the bios sets things up with just the hdmi cable.
is there a typo? Or maybe I don't understand what you are asking? "grab the intel_reg_dump. Iirc that works" ????
is that intel_reg_dumper?
So you want me to run the same script over HDMI (with only HDMI cable) with nomeset with all the available resolutions?
Quoted 4 lines
Another thing to try with VGA is whether the higher refresh-rate helps. You can select that with --rate, i.e.
xrandr --output VGA1 --mode 1024x768 --rate 60.0
Should I try just with 60? Or also with other values?
Is this test with or without nomodeset (I guess w/o, but better check)? Only VGA cable? or also HDMI connected? or both cases?
Please detail case conditions.
I'll try maybe tomorrow night.
thank you for your help,
alfonso
Quoted 21 lines · Alfonso Fiore
Quoted 7 lines · Daniel Vetter
Ok, from the above it looks like the VGA input on your TV is dirt-cheap and it barely manages to sync at 800x600 and fails already at 1024x768 - not even the bios manages to put a picture on your TV :(
To make sure that this is not an issue with the intel gpu, can you maybe test the vga input with another machine with different gpu?
Hi Daniel,
I used this TV for the last 3 years connecting each and all my laptops and I never had a problem running 1024x768 with Windows over VGA (as an extension of my laptop).
However cheap my VGA input might be, Windows handles it just fine. My current GPU is ATI mobility radeon HD 3400.
If you want, I can try to run Ubuntu from USB on my laptop and see if Ubuntu can control my monitor over VGA.
Let me know if this test helps at all (I would prefer to skip it if the info I provided are enough).
Quoted 6 lines
I don't have other desktops.
The only box I can try for POST over VGA is an ALIX
(http://pcengines.ch/) and it also doesn't work very well with my TV but at least it shows a flickering image.Again, with laptops and Windows it has been running fine for ages over VGA.
Ok, so we can't blame the TV ;-)
Quoted 18 lines
Also: I'm sure you are looking at the big picture, but my goal is for sure HDMI, not VGA.
Quoted 5 lines
The overscan is expected because your other output HDMI is still at 1024x768 and hence your desktop is large enough to fit both.
See the first line starting with "Screen 0:" in the xrandr output for current the size of your desktop.
gotcha. Thanks. I didn't know that (but I could have thought about it...)
Quoted 6 lines
Yep, excellent test descriptions! I still need to look at the register dumps, but I think another test might be useful:
Only HDMI with nomodeset, then again grab the
intel_reg_dump. Iirc that works, so it could be useful to see how the bios sets things up with just the hdmi cable.
Quoted 6 lines
is there a typo? Or maybe I don't understand what you are asking? "grab the
intel_reg_dump. Iirc that works" ????
is thatintel_reg_dumper?So you want me to run the same script over HDMI (with only HDMI cable) with nomeset with all the available resolutions?
Actually I only need the output of intel_reg_dumper, resolution doesn't really matter that much. It just needs to be a HDMI-only configuration that works.
Quoted 10 lines
Quoted 4 lines
Another thing to try with VGA is whether the higher refresh-rate helps. You can select that with --rate, i.e.
xrandr --output VGA1 --mode 1024x768 --rate 60.0
Should I try just with 60? Or also with other values?
Is this test with or without nomodeset (I guess w/o, but better check)? Only VGA cable? or also HDMI connected? or both cases?Please detail case conditions.
Test with the i915 driver (i.e. no nomodeset on the kernel cmdline), if you want you can try both VGA cable only and VGA/HDMI but it shouldn't matter. xrandr -q output shows only 55.4 and 60.0 for this resolution, so I think it doesn't make sense to test anything else.
Yours, Daniel
Signature · 2 lines
Daniel Vetter [email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
Quoted 4 lines · Daniel Vetter
Actually I only need the output of
intel_reg_dumper, resolution doesn't really matter that much. It just needs to be a HDMI-only configuration that works.
Hi Daniel,
here are the tests:
TEST-11
========
Only HDMI connected.
TV set on HDMI input.
Reboot.
The login screen uses the wrong resolution and
it's in the wrong position as usual.
I connected over VNC to login.
Strangely now there is no split screen anymore
(I checked and I'm using 3.2.0-drm-intel-fixes+)
the screen is black and the resolution is 1024x768
(I can see from VNC)
xrandr --output HDMI2 --mode 1024x768 --rate 60.0
(as expected no change since it's the actual res)
xrandr --output HDMI2 --mode 1280x720 --rate 60.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 1280x720 --rate 50.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 800x600 --rate 60.3
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 800x600 --rate 60.3
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 720x480 --rate 59.9
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 640x480 --rate 59.9
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 640x480 --rate 60.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
I didn't save any dump cause you requested one where HDMI was working and it never did.
Any idea?
My question is: why I don't even see the split screen anymore and just the black screen?
So, just to test, I run with 3.0.0-15-generic-pae and indeed
I can see the split screen again. Also, the login screen
is 1024x768 (split) rather than 1280x720 (when I run 3.2.0-drm-intel-fixes+) In 3.0.0-15-generic-pae, I can see the split screen but xrandr -q reports way less combinations ([email protected], [email protected], 640x480@60). I tried all three and they all "work" in split screen w/o flickering. The TV goes never "black".
Quoted 1 line
It just needs to be a HDMI-only configuration that works.
So if I understand your request correctly, I don't have such situation with only HDMI.
AGAIN, as soon as I connect the VGA cable the TV is not in split screen anymore and I can see just fine.
But you already have this test from the previous time so I won't take any log.
Quoted 5 lines
Test with the i915 driver (i.e. no nomodeset on the kernel cmdline), if you want you can try both VGA cable only and VGA/HDMI but it shouldn't matter. xrandr -q output shows only 55.4 and 60.0 for this resolution, so I think it doesn't make sense to test anything else.
TEST-12
========
VGA and HDMI connected.
TV set on VGA input.
Reboot.
The login screen is black.
I connected over VNC to login (login screen is 1024x768)
xrandr --output VGA1 --mode 1024x768 --rate 54.4
(nothing changes, as expected)
xrandr --output VGA1 --mode 1024x768 --rate 60.0
bingo. I can see the screen with quite a bit of overscan top and bottom (exactly as I usually saw it over VGA from XP)
I also tried the same test with only VGA cable connected and it works the same way.
xrandr --output VGA1 --mode 800x600 --rate 60.3
also works like in windows, with overscan.
I attached logs from 1024x768.
So, to conclude, I think we achieved feature parity over VGA. It's just a matter
of choosing the right refresh rate...
Do you have any idea about the next step for HDMI?
thank you,
alfonso
Quoted 58 lines · Alfonso Fiore
Quoted 4 lines · Daniel Vetter
Actually I only need the output of
intel_reg_dumper, resolution doesn't really matter that much. It just needs to be a HDMI-only configuration that works.Hi Daniel,
here are the tests:
TEST-11
========
Only HDMI connected.
TV set on HDMI input.
Reboot.
The login screen uses the wrong resolution and
it's in the wrong position as usual.
I connected over VNC to login.
Strangely now there is no split screen anymore
(I checked and I'm using 3.2.0-drm-intel-fixes+)
the screen is black and the resolution is 1024x768
(I can see from VNC)
xrandr --output HDMI2 --mode 1024x768 --rate 60.0
(as expected no change since it's the actual res)
xrandr --output HDMI2 --mode 1280x720 --rate 60.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 1280x720 --rate 50.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 800x600 --rate 60.3
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 800x600 --rate 60.3
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 720x480 --rate 59.9
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 640x480 --rate 59.9
(the TV does something, but then goes back to black
resolution is correct from VNC)
xrandr --output HDMI2 --mode 640x480 --rate 60.0
(the TV does something, but then goes back to black
resolution is correct from VNC)
I didn't save any dump cause you requested one where HDMI was working and it never did.
Any idea?
My question is: why I don't even see the split screen anymore and just the black screen?
So, just to test, I run with 3.0.0-15-generic-pae and indeed
I can see the split screen again. Also, the login screen
is 1024x768 (split) rather than 1280x720 (when I run 3.2.0-drm-intel-fixes+) In 3.0.0-15-generic-pae, I can see the split screen but xrandr -q reports way less combinations ([email protected], [email protected], 640x480@60). I tried all three and they all "work" in split screen w/o flickering. The TV goes never "black".
Quoted 4 lines
Quoted 1 line
It just needs to be a HDMI-only configuration that works.
So if I understand your request correctly, I don't have such situation with only HDMI.
Have you booted with nomodeset and are using the vesa X driver? Iirc you've said that the bios can setup up things correctly, the idea is to grab a register dump to learn how the bios sets things up.
Quoted 27 lines
AGAIN, as soon as I connect the VGA cable the TV is not in split screen anymore and I can see just fine.
But you already have this test from the previous time so I won't take any log.Quoted 5 lines
Test with the i915 driver (i.e. no nomodeset on the kernel cmdline), if you want you can try both VGA cable only and VGA/HDMI but it shouldn't matter. xrandr -q output shows only 55.4 and 60.0 for this resolution, so I think it doesn't make sense to test anything else.
TEST-12
========
VGA and HDMI connected.
TV set on VGA input.
Reboot.
The login screen is black.
I connected over VNC to login (login screen is 1024x768)xrandr --output VGA1 --mode 1024x768 --rate 54.4
(nothing changes, as expected)
xrandr --output VGA1 --mode 1024x768 --rate 60.0
bingo. I can see the screen with quite a bit of overscan top and bottom (exactly as I usually saw it over VGA from XP)I also tried the same test with only VGA cable connected and it works the same way.
Quoted 8 lines
xrandr --output VGA1 --mode 800x600 --rate 60.3
also works like in windows, with overscan.I attached logs from 1024x768.
So, to conclude, I think we achieved feature parity over VGA. It's just a matter
of choosing the right refresh rate...
Yeah, I kinda suspected that XP just picks the highest refresh rate. And likely no one ever tested your TV with anything else than XP, so that could explain why the lower refresh rate is b0rked :(
Quoted 1 line
Do you have any idea about the next step for HDMI?
Sorry, I couldn't yet look into the details. Will do it this week. It also looks like someone else descovered the missing ingredient for interlaced support on newer chipset, so it looks like we're on track to enable 1080i on your TV (well, hopefully).
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 4 lines · Daniel Vetter
Have you booted with nomodeset and are using the vesa X driver? Iirc you've said that the bios can setup up things correctly, the idea is to grab a register dump to learn how the bios sets things up.
Hi Daniel,
silly me. Now I got your point.
You'll get this asap.
regards,
alfonso
Quoted 5 lines · Alfonso Fiore
Quoted 4 lines · Daniel Vetter
Have you booted with nomodeset and are using the vesa X driver? Iirc you've said that the bios can setup up things correctly, the idea is to grab a register dump to learn how the bios sets things up.
Here you go.
I run a test at 1024x768 over HDMI with nomodeset.
Please note xrandr complains:
xrandr: Failed to get size of gamma for output default
and there is no more file for edid:
cp: cannot stat `/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid': No such file or directory
cp: cannot stat `/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid':
No such file or directory
logs attached.
Hope this helps,
alfonso
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 14 lines · Alfonso Fiore
Quoted 5 lines · Alfonso Fiore
Quoted 4 lines · Daniel Vetter
Have you booted with nomodeset and are using the vesa X driver? Iirc you've said that the bios can setup up things correctly, the idea is to grab a register dump to learn how the bios sets things up.
Here you go.
I run a test at 1024x768 over HDMI with nomodeset.
Please note xrandr complains:
xrandr: Failed to get size of gamma for output default
Quoted 7 lines
and there is no more file for edid:
cp: cannot stat `/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1/edid': No such file or directory
cp: cannot stat `/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2/edid':
No such file or directory
That's correct, these files are provided by the kernel modesetting code from the drm driver.
Quoted 1 line
logs attached.
Thanks, I'll have a look.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 2 lines · Daniel Vetter
Quoted 1 line · Alfonso Fiore
On Sun, Jan 22, 2012 at 11:40 AM, Daniel Vetter <[email protected]> wrote:
[snip]
Quoted 6 lines
Quoted 1 line
Do you have any idea about the next step for HDMI?
Sorry, I couldn't yet look into the details. Will do it this week. It also looks like someone else descovered the missing ingredient for interlaced support on newer chipset, so it looks like we're on track to enable 1080i on your TV (well, hopefully).
Great news. In that case, disregard my earlier mail about reg dumping on Windows. Daniel, do you include ironlake in the 'newer chipset' category. Never did get any test results for that platform.
-- Peter
(A907 E02F A6E5 0CD2 34CD 20D2 6760 79C5 AC40 DD6B)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 7 lines · Peter Ross
Quoted 2 lines · Daniel Vetter
Quoted 1 line · Alfonso Fiore
On Sun, Jan 22, 2012 at 11:40 AM, Daniel Vetter <[email protected]> wrote:
[snip]
Quoted 2 lines
Quoted 1 line
Do you have any idea about the next step for HDMI?
Quoted 9 lines
Quoted 4 lines
Sorry, I couldn't yet look into the details. Will do it this week. It also looks like someone else descovered the missing ingredient for interlaced support on newer chipset, so it looks like we're on track to enable 1080i on your TV (well, hopefully).
Great news. In that case, disregard my earlier mail about reg dumping on Windows. Daniel, do you include ironlake in the 'newer chipset' category. Never did get any test results for that platform.
Hi guys.
Keep me posted. If I can test Windows from a USB stick (I have no CD reader), I don't mind doing the test.
regards,
alfonso
Quoted 7 lines · Peter Ross
Quoted 2 lines · Daniel Vetter
Quoted 1 line · Alfonso Fiore
On Sun, Jan 22, 2012 at 11:40 AM, Daniel Vetter <[email protected]> wrote:
[snip]
Quoted 2 lines
Quoted 1 line
Do you have any idea about the next step for HDMI?
Quoted 8 lines
Quoted 4 lines
Sorry, I couldn't yet look into the details. Will do it this week. It also looks like someone else descovered the missing ingredient for interlaced support on newer chipset, so it looks like we're on track to enable 1080i on your TV (well, hopefully).
Great news. In that case, disregard my earlier mail about reg dumping on Windows. Daniel, do you include ironlake in the 'newer chipset' category. Never did get any test results for that platform.
Newer chipset includes everything with HAS_PCH_SPLIT which is gen5+, i.e. ironlake, sandybridge, ivybridge.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Hello
Thanks for helping. I added the dmesg with drm.debug=0x0e below.
I tried last month with get-edid in DOS, with the same unhappy result, see below for actual linux.
Quoted 2 lines
Could you try with the following two patches which just came to this list this week?
http://comments.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/8006
I have this version from xorg-edgers
xserver-xorg-video-intel/oneiric uptodate 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric Is it included ?
I cannot find the repository to look for the log:
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/
Is this link correct ? where is src/drivers ?
http://intellinuxgraphics.org/download.html
Need to look for "1) X.org 2D driver", correct ?
Angela
sudo get-edid | parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11100 "Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers Monitor and video card combination does not support DDC2 transfers 0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
parse-edid: IO error reading EDID
========================
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-generic root=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x0e [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable) [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000be5cc000 (usable) [ 0.000000] BIOS-e820: 00000000be5cc000 - 00000000be628000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000be628000 - 00000000beb36000 (reserved) [ 0.000000] BIOS-e820: 00000000beb36000 - 00000000beb39000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000beb39000 - 00000000bed9f000 (reserved) [ 0.000000] BIOS-e820: 00000000bed9f000 - 00000000bedb0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bedb0000 - 00000000bedc7000 (reserved) [ 0.000000] BIOS-e820: 00000000bedc7000 - 00000000bedc9000 (usable) [ 0.000000] BIOS-e820: 00000000bedc9000 - 00000000bedca000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bedca000 - 00000000bedd2000 (reserved) [ 0.000000] BIOS-e820: 00000000bedd2000 - 00000000beddc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000beddc000 - 00000000bee38000 (reserved) [ 0.000000] BIOS-e820: 00000000bee38000 - 00000000bee7b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bee7b000 - 00000000bf000000 (usable) [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO, BIOS 1101 11/23/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 22FE00000 mask FFFE00000 uncachable [ 0.000000] 5 base 230000000 mask FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3GB, range: 1GB, type UC [ 0.000000] reg 4, base: 8958MB, range: 2MB, type UC [ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC [ 0.000000] total RAM covered: 7926M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB [ 0.000000] reg 6, base: 8958MB, range: 2MB, type UC [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fcf40] fcf40 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf000000 [ 0.000000] 0000000000 - 00bf000000 page 2M [ 0.000000] kernel direct mapping tables up to bf000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000 [ 0.000000] 0100000000 - 022fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 22fe00000 @ beff6000-bf000000 [ 0.000000] RAMDISK: 358ee000 - 36c6f000 [ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000be61d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000be627250 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000be61d140 0A10B (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bedd3f80 00040 [ 0.000000] ACPI: APIC 00000000be627348 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000be6273e0 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000be6275b8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000be6275f8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000022fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000 [ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff] [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227800000-ffff88022e5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0022fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000be5cc [ 0.000000] 0: 0x000bedc7 -> 0x000bedc9 [ 0.000000] 0: 0x000bee7b -> 0x000bf000 [ 0.000000] 0: 0x00100000 -> 0x0022fe00 [ 0.000000] On node 0 totalpages: 2023646 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 760715 pages, LIFO batch:31 [ 0.000000] Normal zone: 17017 pages used for memmap [ 0.000000] Normal zone: 1227655 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000be5cc000 - 00000000be628000 [ 0.000000] PM: Registered nosave memory: 00000000be628000 - 00000000beb36000 [ 0.000000] PM: Registered nosave memory: 00000000beb36000 - 00000000beb39000 [ 0.000000] PM: Registered nosave memory: 00000000beb39000 - 00000000bed9f000 [ 0.000000] PM: Registered nosave memory: 00000000bed9f000 - 00000000bedb0000 [ 0.000000] PM: Registered nosave memory: 00000000bedb0000 - 00000000bedc7000 [ 0.000000] PM: Registered nosave memory: 00000000bedc9000 - 00000000bedca000 [ 0.000000] PM: Registered nosave memory: 00000000bedca000 - 00000000bedd2000 [ 0.000000] PM: Registered nosave memory: 00000000bedd2000 - 00000000beddc000 [ 0.000000] PM: Registered nosave memory: 00000000beddc000 - 00000000bee38000 [ 0.000000] PM: Registered nosave memory: 00000000bee38000 - 00000000bee7b000 [ 0.000000] PM: Registered nosave memory: 00000000bf000000 - 00000000bf800000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000cfa00000 [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79616 r8192 d22784 u262144 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992288 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-generic root=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x0e [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7881468k/9172992k available (6109k kernel code, 1078408k absent, 213116k reserved, 4876k data, 984k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 65011712 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3411.370 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.74 BogoMIPS (lpj=13645480) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000033] AppArmor: AppArmor initialized [ 0.000035] Yama: becoming mindful. [ 0.000562] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001799] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002284] Mount-cache hash table entries: 256 [ 0.002356] Initializing cgroup subsys cpuacct [ 0.002360] Initializing cgroup subsys memory [ 0.002365] Initializing cgroup subsys devices [ 0.002367] Initializing cgroup subsys freezer [ 0.002369] Initializing cgroup subsys net_cls [ 0.002371] Initializing cgroup subsys blkio [ 0.002376] Initializing cgroup subsys perf_event [ 0.002394] CPU: Physical Processor ID: 0 [ 0.002396] CPU: Processor Core ID: 0 [ 0.002400] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002401] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002405] mce: CPU supports 9 MCE banks [ 0.002416] CPU0: Thermal monitoring enabled (TM1) [ 0.002424] using mwait in idle threads. [ 0.004064] ACPI: Core revision 20110413 [ 0.218987] ftrace: allocating 25647 entries in 101 pages [ 0.225806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.265469] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07 [ 0.372137] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.372142] ... version: 3 [ 0.372144] ... bit width: 48 [ 0.372145] ... generic registers: 4 [ 0.372147] ... value mask: 0000ffffffffffff [ 0.372149] ... max period: 000000007fffffff [ 0.372150] ... fixed-purpose events: 3 [ 0.372152] ... event mask: 000000070000000f [ 0.372409] Booting Node 0, Processors #1 [ 0.372412] smpboot cpu 1: start_ip = 96000 [ 0.480231] #2 [ 0.480234] smpboot cpu 2: start_ip = 96000 [ 0.588145] #3 [ 0.588148] smpboot cpu 3: start_ip = 96000 [ 0.696055] #4 [ 0.696058] smpboot cpu 4: start_ip = 96000 [ 0.804039] #5 [ 0.804041] smpboot cpu 5: start_ip = 96000 [ 0.911958] #6 [ 0.911960] smpboot cpu 6: start_ip = 96000 [ 1.019878] #7 Ok. [ 1.019881] smpboot cpu 7: start_ip = 96000 [ 1.127723] Brought up 8 CPUs [ 1.127727] Total of 8 processors activated (54577.29 BogoMIPS). [ 1.132488] devtmpfs: initialized [ 1.132571] PM: Registering ACPI NVS region at be5cc000 (376832 bytes) [ 1.132577] PM: Registering ACPI NVS region at beb36000 (12288 bytes) [ 1.132579] PM: Registering ACPI NVS region at bed9f000 (69632 bytes) [ 1.132581] PM: Registering ACPI NVS region at bedc9000 (4096 bytes) [ 1.132584] PM: Registering ACPI NVS region at bedd2000 (40960 bytes) [ 1.132587] PM: Registering ACPI NVS region at bee38000 (274432 bytes) [ 1.133454] print_constraints: dummy: [ 1.133479] Time: 20:59:48 Date: 01/17/12 [ 1.133500] NET: Registered protocol family 16 [ 1.133563] Trying to unpack rootfs image as initramfs... [ 1.133567] ACPI: bus type pci registered [ 1.133603] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 1.133606] PCI: not using MMCONFIG [ 1.133608] PCI: Using configuration type 1 for base access [ 1.134031] bio: create slab <bio-0> at 0 [ 1.134878] ACPI: EC: Look up EC in DSDT [ 1.135641] ACPI: Executed 1 blocks of module-level executable AML code [ 1.137160] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359) [ 1.137166] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110413/nsinit-349) [ 1.137341] ACPI: SSDT 00000000bedd2818 0079C (v01 AMI IST 00000001 MSFT 03000001) [ 1.137619] ACPI: Dynamic OEM Table Load: [ 1.137622] ACPI: SSDT (null) 0079C (v01 AMI IST 00000001 MSFT 03000001) [ 1.137650] ACPI: SSDT 00000000bedd9a18 0021C (v01 AMI CST 00000001 MSFT 03000001) [ 1.137870] ACPI: Dynamic OEM Table Load: [ 1.137873] ACPI: SSDT (null) 0021C (v01 AMI CST 00000001 MSFT 03000001) [ 1.138367] ACPI: Interpreter enabled [ 1.138370] ACPI: (supports S0 S1 S3 S4 S5) [ 1.138384] ACPI: Using IOAPIC for interrupt routing [ 1.138398] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 1.138434] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 1.149765] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.152894] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.153005] ACPI: No dock devices found. [ 1.153007] HEST: Table not found. [ 1.153009] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.153119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.153238] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.153241] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.153243] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.153246] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] [ 1.153248] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xffffffff] [ 1.153253] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff] [ 1.153262] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 1.153286] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 1.153303] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.153305] pci 0000:00:01.0: PME# disabled [ 1.153313] pci 0000:00:01.1: [8086:0105] type 1 class 0x000604 [ 1.153329] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.153331] pci 0000:00:01.1: PME# disabled [ 1.153344] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300 [ 1.153351] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit] [ 1.153356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.153359] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 1.153399] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.153419] pci 0000:00:16.0: reg 10: [mem 0xfbe29000-0xfbe2900f 64bit] [ 1.153476] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.153479] pci 0000:00:16.0: PME# disabled [ 1.153506] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200 [ 1.153522] pci 0000:00:19.0: reg 10: [mem 0xfbe00000-0xfbe1ffff] [ 1.153530] pci 0000:00:19.0: reg 14: [mem 0xfbe28000-0xfbe28fff] [ 1.153538] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 1.153583] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.153586] pci 0000:00:19.0: PME# disabled [ 1.153608] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.153627] pci 0000:00:1a.0: reg 10: [mem 0xfbe27000-0xfbe273ff] [ 1.153695] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.153699] pci 0000:00:1a.0: PME# disabled [ 1.153721] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.153734] pci 0000:00:1b.0: reg 10: [mem 0xfbe20000-0xfbe23fff 64bit] [ 1.153783] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.153787] pci 0000:00:1b.0: PME# disabled [ 1.153804] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.153862] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.153866] pci 0000:00:1c.0: PME# disabled [ 1.153886] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 1.153943] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.153947] pci 0000:00:1c.1: PME# disabled [ 1.153967] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 1.154024] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.154028] pci 0000:00:1c.2: PME# disabled [ 1.154048] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 1.154105] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.154108] pci 0000:00:1c.3: PME# disabled [ 1.154128] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 1.154186] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.154189] pci 0000:00:1c.4: PME# disabled [ 1.154210] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604 [ 1.154268] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.154271] pci 0000:00:1c.6: PME# disabled [ 1.154291] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604 [ 1.154349] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.154353] pci 0000:00:1c.7: PME# disabled [ 1.154378] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.154397] pci 0000:00:1d.0: reg 10: [mem 0xfbe26000-0xfbe263ff] [ 1.154465] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.154469] pci 0000:00:1d.0: PME# disabled [ 1.154491] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601 [ 1.154598] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106 [ 1.154615] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 1.154622] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 1.154629] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 1.154636] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 1.154643] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 1.154650] pci 0000:00:1f.2: reg 24: [mem 0xfbe25000-0xfbe257ff] [ 1.154679] pci 0000:00:1f.2: PME# supported from D3hot [ 1.154683] pci 0000:00:1f.2: PME# disabled [ 1.154697] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.154711] pci 0000:00:1f.3: reg 10: [mem 0xfbe24000-0xfbe240ff 64bit] [ 1.154730] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 1.154767] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.154770] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.154772] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.154775] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.154802] pci 0000:02:00.0: [dd01:0003] type 0 class 0x000480 [ 1.154819] pci 0000:02:00.0: reg 10: [mem 0xfbd00000-0xfbd0ffff 64bit] [ 1.159612] pci 0000:00:01.1: PCI bridge to [bus 02-02] [ 1.159615] pci 0000:00:01.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.159617] pci 0000:00:01.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.159619] pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.159660] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 1.159664] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.159668] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.159674] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.159740] pci 0000:04:00.0: [1b21:1042] type 0 class 0x000c03 [ 1.159768] pci 0000:04:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit] [ 1.159890] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 1.159895] pci 0000:04:00.0: PME# disabled [ 1.167611] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 1.167616] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.167619] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.167625] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.167667] pci 0000:00:1c.2: PCI bridge to [bus 05-05] [ 1.167671] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) [ 1.167675] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.167680] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.167740] pci 0000:06:00.0: [197b:2362] type 0 class 0x000101 [ 1.167775] pci 0000:06:00.0: reg 10: [io 0xe040-0xe047] [ 1.167791] pci 0000:06:00.0: reg 14: [io 0xe030-0xe033] [ 1.167806] pci 0000:06:00.0: reg 18: [io 0xe020-0xe027] [ 1.167822] pci 0000:06:00.0: reg 1c: [io 0xe010-0xe013] [ 1.167838] pci 0000:06:00.0: reg 20: [io 0xe000-0xe00f] [ 1.167853] pci 0000:06:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff] [ 1.167869] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.167906] pci 0000:06:00.0: PME# supported from D3hot [ 1.167912] pci 0000:06:00.0: PME# disabled [ 1.175608] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 1.175614] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 1.175618] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.175624] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.175692] pci 0000:07:00.0: [1b21:1042] type 0 class 0x000c03 [ 1.175720] pci 0000:07:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit] [ 1.175844] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 1.175849] pci 0000:07:00.0: PME# disabled [ 1.183601] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 1.183606] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 1.183610] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 1.183616] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.183673] pci 0000:08:00.0: [1b21:1080] type 1 class 0x000604 [ 1.183777] pci 0000:00:1c.6: PCI bridge to [bus 08-09] (subtractive decode) [ 1.183781] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 1.183785] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.183790] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.183792] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.183794] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.183795] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.183797] pci 0000:00:1c.6: bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode) [ 1.183858] pci 0000:09:01.0: [10ec:8139] type 0 class 0x000200 [ 1.183888] pci 0000:09:01.0: reg 10: [io 0xd000-0xd0ff] [ 1.183905] pci 0000:09:01.0: reg 14: [mem 0xfb901000-0xfb9010ff] [ 1.184015] pci 0000:09:01.0: supports D1 D2 [ 1.184016] pci 0000:09:01.0: PME# supported from D1 D2 D3hot D3cold [ 1.184022] pci 0000:09:01.0: PME# disabled [ 1.184050] pci 0000:09:02.0: [1106:3044] type 0 class 0x000c00 [ 1.184080] pci 0000:09:02.0: reg 10: [mem 0xfb900000-0xfb9007ff] [ 1.184098] pci 0000:09:02.0: reg 14: [io 0xd100-0xd17f] [ 1.184209] pci 0000:09:02.0: supports D2 [ 1.184210] pci 0000:09:02.0: PME# supported from D2 D3hot D3cold [ 1.184216] pci 0000:09:02.0: PME# disabled [ 1.184291] pci 0000:08:00.0: PCI bridge to [bus 09-09] (subtractive decode) [ 1.184301] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff] [ 1.184307] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.184316] pci 0000:08:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.184318] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode) [ 1.184319] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode) [ 1.184321] pci 0000:08:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 1.184322] pci 0000:08:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 1.184324] pci 0000:08:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.184325] pci 0000:08:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.184327] pci 0000:08:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.184328] pci 0000:08:00.0: bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode) [ 1.184397] pci 0000:0a:00.0: [1b4b:9172] type 0 class 0x000106 [ 1.184414] pci 0000:0a:00.0: reg 10: [io 0xc040-0xc047] [ 1.184426] pci 0000:0a:00.0: reg 14: [io 0xc030-0xc033] [ 1.184438] pci 0000:0a:00.0: reg 18: [io 0xc020-0xc027] [ 1.184450] pci 0000:0a:00.0: reg 1c: [io 0xc010-0xc013] [ 1.184463] pci 0000:0a:00.0: reg 20: [io 0xc000-0xc00f] [ 1.184475] pci 0000:0a:00.0: reg 24: [mem 0xfb810000-0xfb8101ff] [ 1.184487] pci 0000:0a:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref] [ 1.184521] pci 0000:0a:00.0: PME# supported from D3hot [ 1.184526] pci 0000:0a:00.0: PME# disabled [ 1.191593] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a] [ 1.191598] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 1.191601] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff] [ 1.191607] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.191644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.191720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.191737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 1.191752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.191768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 1.191783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 1.191798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 1.191823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 1.191839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 1.191855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT] [ 1.191882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 1.191958] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.192074] pci0000:00: ACPI _OSC control (0x1c) granted [ 1.194807] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.194838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.194866] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.194894] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.194922] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.194949] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.194977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 1.195007] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.195063] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.195070] vgaarb: loaded [ 1.195072] vgaarb: bridge control possible 0000:00:02.0 [ 1.195169] SCSI subsystem initialized [ 1.195206] libata version 3.00 loaded. [ 1.195229] usbcore: registered new interface driver usbfs [ 1.195236] usbcore: registered new interface driver hub [ 1.195252] usbcore: registered new device driver usb [ 1.195295] PCI: Using ACPI for IRQ routing [ 1.196591] PCI: pci_cache_line_size set to 64 bytes [ 1.196687] reserve RAM buffer: 000000000009b400 - 000000000009ffff [ 1.196689] reserve RAM buffer: 00000000be5cc000 - 00000000bfffffff [ 1.196692] reserve RAM buffer: 00000000bedc9000 - 00000000bfffffff [ 1.196693] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff [ 1.196695] reserve RAM buffer: 000000022fe00000 - 000000022fffffff [ 1.196749] NetLabel: Initializing [ 1.196751] NetLabel: domain hash size = 128 [ 1.196753] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.196760] NetLabel: unlabeled traffic allowed by default [ 1.196787] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.196793] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.198805] Switching to clocksource hpet [ 1.199581] Switched to NOHz mode on CPU #0 [ 1.199672] Switched to NOHz mode on CPU #3 [ 1.199680] Switched to NOHz mode on CPU #7 [ 1.199682] Switched to NOHz mode on CPU #2 [ 1.199694] Switched to NOHz mode on CPU #1 [ 1.199708] Switched to NOHz mode on CPU #6 [ 1.199716] Switched to NOHz mode on CPU #5 [ 1.199726] Switched to NOHz mode on CPU #4 [ 1.202077] AppArmor: AppArmor Filesystem Enabled [ 1.202091] pnp: PnP ACPI init [ 1.202099] ACPI: bus type pnp registered [ 1.202181] pnp 00:00: [bus 00-ff] [ 1.202183] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.202184] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.202185] pnp 00:00: [io 0x0d00-0xffff window] [ 1.202186] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.202188] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 1.202189] pnp 00:00: [mem 0xcfa00000-0xffffffff window] [ 1.202190] pnp 00:00: [mem 0x00000000 window] [ 1.202232] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.202265] pnp 00:01: [mem 0xfed10000-0xfed19fff] [ 1.202267] pnp 00:01: [mem 0xe0000000-0xe3ffffff] [ 1.202268] pnp 00:01: [mem 0xfed90000-0xfed93fff] [ 1.202269] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 1.202270] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 1.202295] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved [ 1.202298] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved [ 1.202301] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.202303] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.202306] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved [ 1.202308] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.202345] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.202346] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.202348] pnp 00:02: [io 0x0290-0x029f] [ 1.202349] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.202372] system 00:02: [io 0x0290-0x029f] has been reserved [ 1.202375] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.202382] pnp 00:03: [dma 4] [ 1.202383] pnp 00:03: [io 0x0000-0x000f] [ 1.202384] pnp 00:03: [io 0x0081-0x0083] [ 1.202385] pnp 00:03: [io 0x0087] [ 1.202386] pnp 00:03: [io 0x0089-0x008b] [ 1.202387] pnp 00:03: [io 0x008f] [ 1.202388] pnp 00:03: [io 0x00c0-0x00df] [ 1.202401] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.202406] pnp 00:04: [io 0x0070-0x0071] [ 1.202413] pnp 00:04: [irq 8] [ 1.202424] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.202428] pnp 00:05: [io 0x0061] [ 1.202439] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.202449] pnp 00:06: [io 0x0010-0x001f] [ 1.202450] pnp 00:06: [io 0x0022-0x003f] [ 1.202451] pnp 00:06: [io 0x0044-0x005f] [ 1.202452] pnp 00:06: [io 0x0063] [ 1.202453] pnp 00:06: [io 0x0065] [ 1.202454] pnp 00:06: [io 0x0067-0x006f] [ 1.202455] pnp 00:06: [io 0x0072-0x007f] [ 1.202457] pnp 00:06: [io 0x0080] [ 1.202458] pnp 00:06: [io 0x0084-0x0086] [ 1.202459] pnp 00:06: [io 0x0088] [ 1.202459] pnp 00:06: [io 0x008c-0x008e] [ 1.202460] pnp 00:06: [io 0x0090-0x009f] [ 1.202461] pnp 00:06: [io 0x00a2-0x00bf] [ 1.202462] pnp 00:06: [io 0x00e0-0x00ef] [ 1.202463] pnp 00:06: [io 0x04d0-0x04d1] [ 1.202489] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.202492] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.202497] pnp 00:07: [io 0x00f0-0x00ff] [ 1.202501] pnp 00:07: [irq 13] [ 1.202512] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.202672] pnp 00:08: [io 0x0400-0x0453] [ 1.202674] pnp 00:08: [io 0x0458-0x047f] [ 1.202675] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 1.202676] pnp 00:08: [io 0x0500-0x057f] [ 1.202677] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 1.202678] pnp 00:08: [mem 0xfec00000-0xfecfffff] [ 1.202679] pnp 00:08: [mem 0xfed08000-0xfed08fff] [ 1.202680] pnp 00:08: [mem 0xff000000-0xffffffff] [ 1.202705] system 00:08: [io 0x0400-0x0453] has been reserved [ 1.202707] system 00:08: [io 0x0458-0x047f] has been reserved [ 1.202710] system 00:08: [io 0x0500-0x057f] has been reserved [ 1.202712] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.202715] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.202717] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.202720] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 1.202723] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.202743] pnp 00:09: [io 0x0454-0x0457] [ 1.202763] system 00:09: [io 0x0454-0x0457] has been reserved [ 1.202766] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.202858] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 1.202879] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.202971] pnp: PnP ACPI: found 11 devices [ 1.202973] ACPI: ACPI bus type pnp unregistered [ 1.208166] PCI: max bus depth: 2 pci_try_num: 3 [ 1.208234] pci 0000:00:1c.3: BAR 15: assigned [mem 0xcfa00000-0xcfafffff pref] [ 1.208237] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.208239] pci 0000:00:01.0: bridge window [io disabled] [ 1.208242] pci 0000:00:01.0: bridge window [mem disabled] [ 1.208244] pci 0000:00:01.0: bridge window [mem pref disabled] [ 1.208248] pci 0000:00:01.1: PCI bridge to [bus 02-02] [ 1.208250] pci 0000:00:01.1: bridge window [io disabled] [ 1.208252] pci 0000:00:01.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.208255] pci 0000:00:01.1: bridge window [mem pref disabled] [ 1.208258] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 1.208260] pci 0000:00:1c.0: bridge window [io disabled] [ 1.208265] pci 0000:00:1c.0: bridge window [mem disabled] [ 1.208270] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 1.208276] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 1.208278] pci 0000:00:1c.1: bridge window [io disabled] [ 1.208283] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.208288] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 1.208294] pci 0000:00:1c.2: PCI bridge to [bus 05-05] [ 1.208296] pci 0000:00:1c.2: bridge window [io disabled] [ 1.208301] pci 0000:00:1c.2: bridge window [mem disabled] [ 1.208305] pci 0000:00:1c.2: bridge window [mem pref disabled] [ 1.208312] pci 0000:06:00.0: BAR 6: assigned [mem 0xcfa00000-0xcfa0ffff pref] [ 1.208315] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 1.208318] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 1.208324] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.208328] pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xcfafffff pref] [ 1.208335] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 1.208337] pci 0000:00:1c.4: bridge window [io disabled] [ 1.208342] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 1.208347] pci 0000:00:1c.4: bridge window [mem pref disabled] [ 1.208353] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 1.208358] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff] [ 1.208366] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.208373] pci 0000:08:00.0: bridge window [mem pref disabled] [ 1.208383] pci 0000:00:1c.6: PCI bridge to [bus 08-09] [ 1.208386] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 1.208392] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.208396] pci 0000:00:1c.6: bridge window [mem pref disabled] [ 1.208403] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a] [ 1.208406] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 1.208411] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff] [ 1.208416] pci 0000:00:1c.7: bridge window [mem pref disabled] [ 1.208429] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.208432] pci 0000:00:01.0: setting latency timer to 64 [ 1.208435] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.208437] pci 0000:00:01.1: setting latency timer to 64 [ 1.208444] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.208449] pci 0000:00:1c.0: setting latency timer to 64 [ 1.208455] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.208459] pci 0000:00:1c.1: setting latency timer to 64 [ 1.208467] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.208471] pci 0000:00:1c.2: setting latency timer to 64 [ 1.208479] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.208483] pci 0000:00:1c.3: setting latency timer to 64 [ 1.208489] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.208493] pci 0000:00:1c.4: setting latency timer to 64 [ 1.208499] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.208503] pci 0000:00:1c.6: setting latency timer to 64 [ 1.208510] pci 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.208516] pci 0000:08:00.0: setting latency timer to 64 [ 1.208523] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.208527] pci 0000:00:1c.7: setting latency timer to 64 [ 1.208531] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.208532] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.208533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.208534] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff] [ 1.208536] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 1.208537] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.208539] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 1.208540] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 1.208541] pci_bus 0000:06: resource 2 [mem 0xcfa00000-0xcfafffff pref] [ 1.208543] pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.208544] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 1.208545] pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.208546] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 1.208548] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 1.208549] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 1.208550] pci_bus 0000:08: resource 7 [mem 0xcfa00000-0xffffffff] [ 1.208551] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 1.208553] pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.208554] pci_bus 0000:09: resource 4 [io 0xd000-0xdfff] [ 1.208555] pci_bus 0000:09: resource 5 [mem 0xfb900000-0xfb9fffff] [ 1.208556] pci_bus 0000:09: resource 8 [io 0x0000-0x0cf7] [ 1.208558] pci_bus 0000:09: resource 9 [io 0x0d00-0xffff] [ 1.208559] pci_bus 0000:09: resource 10 [mem 0x000a0000-0x000bffff] [ 1.208560] pci_bus 0000:09: resource 11 [mem 0xcfa00000-0xffffffff] [ 1.208561] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 1.208563] pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff] [ 1.208581] NET: Registered protocol family 2 [ 1.208733] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.209376] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.210328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.210449] TCP: Hash tables configured (established 524288 bind 65536) [ 1.210451] TCP reno registered [ 1.210462] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.210488] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.210562] NET: Registered protocol family 1 [ 1.210574] pci 0000:00:02.0: Boot video device [ 1.466778] PCI: CLS 64 bytes, default 64 [ 1.466780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.466784] Placing 64MB software IO TLB between ffff8800ba5cc000 - ffff8800be5cc000 [ 1.466787] software IO TLB at phys 0xba5cc000 - 0xbe5cc000 [ 1.467162] audit: initializing netlink socket (disabled) [ 1.467170] type=2000 audit(1326833987.036:1): initialized [ 1.487333] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.502022] VFS: Disk quotas dquot_6.5.2 [ 1.502057] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.502382] fuse init (API version 7.16) [ 1.502428] msgmni has been set to 15393 [ 1.502667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.502689] io scheduler noop registered [ 1.502691] io scheduler deadline registered [ 1.502713] io scheduler cfq registered (default) [ 1.502779] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.502798] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.502829] pcieport 0000:00:01.1: setting latency timer to 64 [ 1.502843] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X [ 1.502877] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.502914] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X [ 1.502968] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.503005] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X [ 1.503060] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.503097] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X [ 1.503150] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.503187] pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X [ 1.503241] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.503278] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X [ 1.503332] pcieport 0000:00:1c.7: setting latency timer to 64 [ 1.503369] pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X [ 1.503429] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.503433] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.503440] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt [ 1.503442] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.503445] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded [ 1.503460] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.503465] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.503478] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.503480] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.503485] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.503498] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 1.503503] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 1.503517] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.503519] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 1.503524] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.503536] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 1.503539] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 1.503543] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 1.503556] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 1.503558] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 1.503563] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 1.503572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.503585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.503608] intel_idle: MWAIT substates: 0x1120 [ 1.503609] intel_idle: v0.4 model 0x2A [ 1.503610] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.503682] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.503687] ACPI: Power Button [PWRB] [ 1.503711] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.503714] ACPI: Power Button [PWRF] [ 1.503730] ACPI: acpi_idle yielding to intel_idle [ 1.516175] ERST: Table is not found! [ 1.516218] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.599015] Freeing initrd memory: 19972k freed [ 1.750728] Linux agpgart interface v0.103 [ 1.750795] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.750902] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.752249] agpgart-intel 0000:00:00.0: detected 262144K stolen memory [ 1.752336] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.752870] brd: module loaded [ 1.753117] loop: module loaded [ 1.753334] Fixed MDIO Bus: probed [ 1.753346] PPP generic driver version 2.4.2 [ 1.753363] tun: Universal TUN/TAP device driver, 1.6 [ 1.753364] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.753403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.753423] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.753437] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.753440] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.753459] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.753482] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.757369] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.757383] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbe27000 [ 1.770484] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.770594] hub 1-0:1.0: USB hub found [ 1.770598] hub 1-0:1.0: 2 ports detected [ 1.770636] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.770646] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.770649] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.770669] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.770689] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.774571] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.774575] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbe26000 [ 1.786474] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.786576] hub 2-0:1.0: USB hub found [ 1.786578] hub 2-0:1.0: 2 ports detected [ 1.786610] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.786617] uhci_hcd: USB Universal Host Controller Interface driver [ 1.786648] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.789714] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.789719] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.789780] mousedev: PS/2 mouse device common for all mice [ 1.789843] rtc_cmos 00:04: RTC can wake from S4 [ 1.789917] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.789943] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.789997] device-mapper: uevent: version 1.0.3 [ 1.790034] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 1.790130] cpuidle: using governor ladder [ 1.790285] cpuidle: using governor menu [ 1.790287] EFI Variables Facility v0.08 2004-May-17 [ 1.790399] TCP cubic registered [ 1.790470] NET: Registered protocol family 10 [ 1.790697] NET: Registered protocol family 17 [ 1.790706] Registering the dns_resolver key type [ 1.790754] PM: Hibernation image not present or could not be loaded. [ 1.790760] registered taskstats version 1 [ 1.801676] Magic number: 12:809:1003 [ 1.801694] input input0: hash matches [ 1.801701] vc vcs: hash matches [ 1.801704] pnp 00:05: hash matches [ 1.801777] rtc_cmos 00:04: setting system clock to 2012-01-17 20:59:48 UTC (1326833988) [ 1.802722] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.802724] EDD information not available. [ 1.803684] Freeing unused kernel memory: 984k freed [ 1.803758] Write protecting the kernel read-only data: 10240k [ 1.804070] Freeing unused kernel memory: 16k freed [ 1.806583] Freeing unused kernel memory: 1396k freed [ 1.816862] udevd[100]: starting version 173 [ 1.825413] wmi: Mapper loaded [ 1.831571] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.831644] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 1.831649] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.831827] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.832341] ahci 0000:00:1f.2: version 3.0 [ 1.832347] [drm] Initialized drm 1.1.0 20060810 [ 1.832359] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.832407] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 1.832484] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x22 impl SATA mode [ 1.832489] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.832497] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.833039] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.833044] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.837831] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.837851] 8139cp 0000:09:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.838195] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.838228] 8139too 0000:09:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.838862] scsi0 : ahci [ 1.838966] scsi1 : ahci [ 1.839034] scsi2 : ahci [ 1.839183] scsi3 : ahci [ 1.839389] scsi4 : ahci [ 1.839458] scsi5 : ahci [ 1.839544] ata1: DUMMY [ 1.839551] ata2: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25180 irq 48 [ 1.839554] ata3: DUMMY [ 1.839556] ata4: DUMMY [ 1.839558] ata5: DUMMY [ 1.839562] ata6: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25380 irq 48 [ 1.839593] ahci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.839602] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.839620] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.839876] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.839883] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.839904] ahci 0000:06:00.0: setting latency timer to 64 [ 1.839997] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [ 1.840156] scsi6 : ahci [ 1.840234] scsi7 : ahci [ 1.840280] ata7: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 19 [ 1.840289] ata8: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 19 [ 1.840312] ahci 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.840441] ahci 0000:0a:00.0: irq 50 for MSI/MSI-X [ 1.840575] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.840581] ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.840590] ahci 0000:0a:00.0: setting latency timer to 64 [ 1.840764] 8139too 0000:09:01.0: eth0: RealTek RTL8139 at 0xd000, 00:40:f4:51:8a:62, IRQ 19 [ 1.840804] firewire_ohci 0000:09:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.840914] scsi8 : ahci [ 1.840990] scsi9 : ahci [ 1.841038] ata9: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810100 irq 50 [ 1.841045] ata10: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810180 irq 50 [ 1.892940] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfbc00000 [ 1.892993] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X [ 1.892996] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X [ 1.892999] xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X [ 1.893001] xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X [ 1.893004] xhci_hcd 0000:04:00.0: irq 55 for MSI/MSI-X [ 1.893007] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X [ 1.893009] xhci_hcd 0000:04:00.0: irq 57 for MSI/MSI-X [ 1.893012] xhci_hcd 0000:04:00.0: irq 58 for MSI/MSI-X [ 1.893149] xHCI xhci_add_endpoint called for root hub [ 1.893151] xHCI xhci_check_bandwidth called for root hub [ 1.893172] hub 3-0:1.0: USB hub found [ 1.893179] hub 3-0:1.0: 2 ports detected [ 1.893215] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.893243] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 1.893296] xHCI xhci_add_endpoint called for root hub [ 1.893297] xHCI xhci_check_bandwidth called for root hub [ 1.893308] hub 4-0:1.0: USB hub found [ 1.893314] hub 4-0:1.0: 2 ports detected [ 1.893356] xhci_hcd 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.893372] xhci_hcd 0000:07:00.0: setting latency timer to 64 [ 1.893375] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.893391] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5 [ 1.902534] firewire_ohci: Added fw-ohci device 0000:09:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 1.954527] xhci_hcd 0000:07:00.0: irq 16, io mem 0xfba00000 [ 1.954585] xhci_hcd 0000:07:00.0: irq 59 for MSI/MSI-X [ 1.954588] xhci_hcd 0000:07:00.0: irq 60 for MSI/MSI-X [ 1.954591] xhci_hcd 0000:07:00.0: irq 61 for MSI/MSI-X [ 1.954593] xhci_hcd 0000:07:00.0: irq 62 for MSI/MSI-X [ 1.954596] xhci_hcd 0000:07:00.0: irq 63 for MSI/MSI-X [ 1.954599] xhci_hcd 0000:07:00.0: irq 64 for MSI/MSI-X [ 1.954601] xhci_hcd 0000:07:00.0: irq 65 for MSI/MSI-X [ 1.954604] xhci_hcd 0000:07:00.0: irq 66 for MSI/MSI-X [ 1.954738] xHCI xhci_add_endpoint called for root hub [ 1.954739] xHCI xhci_check_bandwidth called for root hub [ 1.954759] hub 5-0:1.0: USB hub found [ 1.954765] hub 5-0:1.0: 2 ports detected [ 1.954800] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.954828] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 [ 1.954880] xHCI xhci_add_endpoint called for root hub [ 1.954881] xHCI xhci_check_bandwidth called for root hub [ 1.954893] hub 6-0:1.0: USB hub found [ 1.954899] hub 6-0:1.0: 2 ports detected [ 2.086355] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 2.147718] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 14:da:e9:4f:94:94 [ 2.147722] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection [ 2.147766] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.147821] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.147833] i915 0000:00:02.0: setting latency timer to 64 [ 2.158272] ata7: SATA link down (SStatus 0 SControl 300) [ 2.158274] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.158323] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.158336] ata8: SATA link down (SStatus 0 SControl 300) [ 2.162287] ata9: SATA link down (SStatus 0 SControl 300) [ 2.164762] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 2.164766] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.171280] ata6.00: configured for UDMA/133 [ 2.171736] ata2.00: ATA-8: ST3000DM001-9YN166, CC9B, max UDMA/133 [ 2.171740] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.172356] ata2.00: configured for UDMA/133 [ 2.172469] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC9B PQ: 0 ANSI: 5 [ 2.172555] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.172646] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.172658] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.172716] sd 1:0:0:0: [sda] Write Protect is off [ 2.172719] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.172725] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.172742] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.172823] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.172825] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.172858] sd 5:0:0:0: [sdb] Write Protect is off [ 2.172862] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.172887] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.195171] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbeb36018 [ 2.195197] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.195199] [drm:intel_opregion_setup], SWSCI supported [ 2.195200] [drm:intel_opregion_setup], ASLE supported [ 2.195216] i915 0000:00:02.0: irq 67 for MSI/MSI-X [ 2.195218] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.195222] [drm] Driver supports precise vblank timestamp query. [ 2.195226] [drm:intel_detect_pch], Found CougarPoint PCH [ 2.195227] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 2.195229] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.195232] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.195233] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.195238] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.195239] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.195242] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.195247] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 2.195254] [drm:intel_modeset_init], 2 display pipes available. [ 2.195258] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.195579] [drm:intel_crt_init], pch crt adpa set to 0x80f40000 [ 2.197826] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 2.197828] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 2.197881] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 2.198389] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.198391] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.198898] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.198899] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.198961] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 2.199468] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.199470] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.199976] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.199977] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.200004] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 2.200510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.200512] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.201018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.201019] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.201050] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 2.201053] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 2.210691] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 > [ 2.211020] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.218783] hub 1-1:1.0: USB hub found [ 2.218908] hub 1-1:1.0: 6 ports detected [ 2.258215] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.282571] [drm:intel_update_fbc], [ 2.282815] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 2.282818] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 2.330168] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.333465] ata10.00: ATA-7: SAMSUNG HD160JJ, WU100-42, max UDMA/100 [ 2.333472] ata10.00: 312581808 sectors, multi 0: LBA48 [ 2.334142] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.336785] ata10.00: configured for UDMA/100 [ 2.336891] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5 [ 2.336976] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.336995] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 2.337015] sd 9:0:0:0: [sdc] Write Protect is off [ 2.337018] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.337034] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.346140] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.346290] sdc: sdc1 sdc2 [ 2.346555] sd 9:0:0:0: [sdc] Attached SCSI disk [ 2.374520] [drm:intel_update_fbc], [ 2.404135] [drm:init_status_page], render ring hws offset: 0x00000000 [ 2.404216] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000 [ 2.404287] [drm:init_status_page], blt ring hws offset: 0x00042000 [ 2.404417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 2.404420] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000 [ 2.406172] firewire_core: created device fw0: GUID 001fc6000017dc7a, S400 [ 2.412827] [drm:pch_irq_handler] *ERROR* PCH poison interrupt [ 2.412837] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 2.418091] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 2.418096] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.418108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 2.418111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 2.429963] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 2.429966] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 2.430474] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.438586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.446569] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.454051] [drm:ironlake_dp_detect], DPCD: 0000 [ 2.454056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 2.454060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 2.465784] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 2.465786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 2.466045] Refined TSC clocksource calibration: 3411.120 MHz. [ 2.466051] Switching to clocksource tsc [ 2.470257] sda: sda1 sda2 sda3 sda4 sda5 [ 2.470631] hub 2-1:1.0: USB hub found [ 2.470679] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.470722] hub 2-1:1.0: 8 ports detected [ 2.542050] usb 1-1.1: new high speed USB device number 3 using ehci_hcd [ 2.590210] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 2.641027] usbcore: registered new interface driver uas [ 2.641447] Initializing USB Mass Storage driver... [ 2.641521] scsi10 : usb-storage 1-1.1:1.0 [ 2.641574] usbcore: registered new interface driver usb-storage [ 2.641577] USB Mass Storage support registered. [ 2.709940] usb 1-1.2: new low speed USB device number 4 using ehci_hcd [ 2.714800] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 2.714803] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 2.714805] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 2.714807] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 2.714809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 2.714811] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.714813] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.714815] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 2.714817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 2.715324] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.722377] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.730365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.737857] [drm:ironlake_dp_detect], DPCD: 0000 [ 2.737862] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 2.737866] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 2.738376] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.746355] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.754360] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.761845] [drm:ironlake_dp_detect], DPCD: 0000 [ 2.761852] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 2.761856] [drm:drm_setup_crtcs], [ 2.761860] [drm:drm_enable_connectors], connector 5 enabled? no [ 2.761862] [drm:drm_enable_connectors], connector 8 enabled? no [ 2.761865] [drm:drm_enable_connectors], connector 11 enabled? no [ 2.761868] [drm:drm_enable_connectors], connector 14 enabled? no [ 2.761871] [drm:drm_enable_connectors], connector 16 enabled? yes [ 2.761873] [drm:drm_enable_connectors], connector 17 enabled? no [ 2.761876] [drm:drm_enable_connectors], connector 19 enabled? no [ 2.761879] [drm:drm_target_preferred], looking for cmdline mode on connector 16 [ 2.761882] [drm:drm_target_preferred], looking for preferred mode on connector 16 [ 2.761885] [drm:drm_target_preferred], found mode 1024x768 [ 2.761887] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.761892] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3 [ 2.764562] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, bo ffff88021fd1ec00 [ 2.764604] fbcon: inteldrmfb (fb0) is primary device [ 2.764633] [drm:drm_crtc_helper_set_config], [ 2.764634] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.764637] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 2.764638] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 2.764639] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.764641] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.764643] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 2.764644] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 2.764645] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 2.764646] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 2.764647] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.764650] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 2.764888] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 2.764889] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.817803] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.817809] [drm:intel_pipe_set_base_atomic], Writing base 00063000 00000000 0 0 4096 [ 2.817813] [drm:intel_update_fbc], [ 2.817816] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 2.817819] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 2.817823] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 2.817827] [drm:ironlake_check_srwm], watermark 3: display plane 47, fbc lines 3, cursor 6 [ 2.817831] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set [MODE:22:1024x768] [ 2.817836] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 2.817839] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 2.817843] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 2.817846] [drm:ironlake_check_srwm], watermark 3: display plane 47, fbc lines 3, cursor 6 [ 2.822003] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 [ 2.822055] generic-usb 0003:05A4:9881.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1a.0-1.2/input0 [ 2.847279] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3 [ 2.847370] generic-usb 0003:05A4:9881.0002: input,hidraw1: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1a.0-1.2/input1 [ 2.847376] usbcore: registered new interface driver usbhid [ 2.847376] usbhid: USB HID core driver [ 2.873767] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.881841] usb 2-1.2: new low speed USB device number 3 using ehci_hcd [ 2.929741] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.930545] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 2.930547] [drm:gen6_fdi_link_train], FDI train 1 done. [ 2.931196] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 2.931198] [drm:gen6_fdi_link_train], FDI train 2 done. [ 2.931199] [drm:gen6_fdi_link_train], FDI train done. [ 2.932405] [drm:intel_update_fbc], [ 2.932412] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 2.932413] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] set DPMS on [ 2.932430] [drm:drm_crtc_helper_set_config], [ 2.932430] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 2.932433] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 2.932436] Console: switching to colour frame buffer device 128x48 [ 2.932442] [drm:drm_crtc_helper_set_config], [ 2.932443] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 2.932446] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 2.933764] fb0: inteldrmfb frame buffer device [ 2.933776] drm: registered panic notifier [ 2.934378] fixme: max PWM is zero. [ 2.934453] acpi device:42: registered as cooling_device8 [ 2.934594] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.934670] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.934723] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.949109] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 2.987149] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5 [ 2.987230] generic-usb 0003:03F0:0024.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 3.057727] usb 2-1.3: new low speed USB device number 4 using ehci_hcd [ 3.156041] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input6 [ 3.156129] generic-usb 0003:046D:C018.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0 [ 3.229634] usb 2-1.7: new full speed USB device number 5 using ehci_hcd [ 3.255350] [drm:drm_crtc_helper_set_config], [ 3.255351] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 3.255357] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.305842] [drm:i915_driver_open], [ 3.305850] [drm:drm_crtc_helper_set_config], [ 3.305851] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 3.305855] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.305857] [drm:drm_crtc_helper_set_config], [ 3.305858] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 3.305860] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.305865] [drm:i915_driver_open], [ 3.305868] [drm:drm_crtc_helper_set_config], [ 3.305868] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 3.305871] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.305872] [drm:drm_crtc_helper_set_config], [ 3.305873] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 3.305875] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.305879] [drm:i915_driver_open], [ 3.305911] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 3.305913] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 3.305917] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.305919] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 3.305922] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 3.305924] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.305925] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 3.305928] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.305929] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 3.305931] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 3.305932] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.305934] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 3.305936] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 3.305937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 3.317122] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 3.317124] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 3.317126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 3.328396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 3.328399] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.328401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 3.328907] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.333988] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.341974] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.349464] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.349472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 3.349480] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.349484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 3.349992] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.357965] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.365961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.373451] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.373458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 3.373472] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.373476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 3.384673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 3.384676] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.384677] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 3.395880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 3.395883] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 3.395884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 3.514627] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 3.633324] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 3.633326] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 3.633327] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 3.633330] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 3.633331] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 3.633333] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.633335] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.633337] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3.633340] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 3.634652] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 3.634654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 3.635161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.641781] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.649772] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.657265] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.657272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 3.657281] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 3.657284] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 3.657791] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.665764] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.673760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.681250] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.681257] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 3.681268] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 3.681272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 3.681779] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.689754] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.697746] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.705237] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.705244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 3.705252] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 3.705256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 3.705763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.713735] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.721730] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.729222] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.729228] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 3.729400] [drm:drm_crtc_helper_set_config], [ 3.729401] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0) [ 3.729405] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 3.766159] scsi 10:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.766212] scsi: killing requests for dead queue [ 3.788611] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 3.809332] scsi: killing requests for dead queue [ 3.837279] scsi: killing requests for dead queue [ 3.869280] scsi: killing requests for dead queue [ 3.933285] scsi: killing requests for dead queue [ 4.013167] scsi: killing requests for dead queue [ 4.077131] scsi: killing requests for dead queue [ 4.137085] scsi: killing requests for dead queue [ 4.205066] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 4.899397] sd 10:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 4.900140] sd 10:0:0:0: [sdd] Write Protect is off [ 4.900169] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00 [ 4.900893] sd 10:0:0:0: [sdd] No Caching mode page present [ 4.900924] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 4.903763] sd 10:0:0:0: [sdd] No Caching mode page present [ 4.903794] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 4.916281] sdd: sdd1 [ 4.918880] sd 10:0:0:0: [sdd] No Caching mode page present [ 4.918913] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 4.918946] sd 10:0:0:0: [sdd] Attached SCSI removable disk [ 12.931259] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 12.931266] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.931270] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2 [ 12.942431] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2 [ 12.942937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 12.947743] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 12.955738] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 12.963227] [drm:ironlake_dp_detect], DPCD: 0000 [ 12.963233] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2 [ 12.974381] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2 [ 13.092620] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 13.092622] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] status updated from 1 to 1 [ 13.093128] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.099644] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.107639] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.115130] [drm:ironlake_dp_detect], DPCD: 0000 [ 13.115136] [drm:output_poll_execute], [CONNECTOR:17:DP-2] status updated from 2 to 2 [ 13.115645] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.123628] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.131623] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.139114] [drm:ironlake_dp_detect], DPCD: 0000 [ 13.139120] [drm:output_poll_execute], [CONNECTOR:19:DP-3] status updated from 2 to 2 [ 15.186996] udevd[407]: starting version 173 [ 15.212380] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 15.212661] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 15.212668] mei 0000:00:16.0: setting latency timer to 64 [ 15.213261] lp: driver loaded but no devices found [ 15.242605] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.242610] hda_intel: position_fix set to 1 for device 1043:8410 [ 15.242662] HDA Intel 0000:00:1b.0: irq 68 for MSI/MSI-X [ 15.242688] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.256768] asus_wmi: ASUS WMI generic driver loaded [ 15.257096] asus_wmi: Initialization: 0x0 [ 15.257120] asus_wmi: BIOS WMI version: 0.9 [ 15.257163] asus_wmi: SFUN value: 0x0 [ 15.257369] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7 [ 15.257582] asus_wmi: Backlight controlled by ACPI video driver [ 15.279507] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 15.383280] Adding 10485756k swap on /dev/sdb5. Priority:-1 extents:1 across:10485756k [ 15.431223] type=1400 audit(1326834002.132:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=553 comm="apparmor_parser" [ 15.431321] type=1400 audit(1326834002.132:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=616 comm="apparmor_parser" [ 15.431328] type=1400 audit(1326834002.132:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=454 comm="apparmor_parser" [ 15.431449] type=1400 audit(1326834002.132:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser" [ 15.431594] type=1400 audit(1326834002.132:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser" [ 15.431702] type=1400 audit(1326834002.132:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=616 comm="apparmor_parser" [ 15.431707] type=1400 audit(1326834002.132:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=454 comm="apparmor_parser" [ 15.431943] type=1400 audit(1326834002.132:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=616 comm="apparmor_parser" [ 15.431949] type=1400 audit(1326834002.132:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=454 comm="apparmor_parser" [ 15.432710] type=1400 audit(1326834002.132:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=915 comm="apparmor_parser" [ 15.498792] WARNING: You are using an experimental version of the media stack. [ 15.498793] As the driver is backported to an older kernel, it doesn't offer [ 15.498794] enough quality for its usage in production. [ 15.498795] Use it with care. [ 15.498795] Latest git patches (needed if you report a bug to [email protected]): [ 15.498796] 1e73fa5d56333230854ae9460579eb2fcee8af02 [media] stb6100: Properly retrieve symbol rate [ 15.498797] e97a5d893fdf45c20799b72a1c11dca3b282c89c [media] fs/compat_ioctl: it needs to see the DVBv3 compat stuff [ 15.498798] 53c91373bdd74f7e11d2726046a90b986c1ed650 [media] dvb: remove the extra parameter on get_frontend [ 15.585693] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [ 15.632912] usbcore: registered new interface driver ath3k [ 15.641557] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [ 15.641987] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.642166] 8139too 0000:09:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 15.667786] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH [ 15.667825] DDBridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.667834] DDBridge driver detected: Digital Devices Octopus DVB adapter [ 15.667865] HW 00010004 REG 00010001 [ 15.667904] DDBridge 0000:02:00.0: irq 69 for MSI/MSI-X [ 15.668795] Port 0 (TAB 1): DUAL DVB-C/T [ 15.669392] Port 1 (TAB 2): NO MODULE [ 15.669988] Port 2 (TAB 3): NO MODULE [ 15.670584] Port 3 (TAB 4): NO MODULE [ 15.670787] DVB: registering new adapter (DDBridge) [ 15.670788] DVB: registering new adapter (DDBridge) [ 15.787383] hda_codec: ALC892: BIOS auto-probing. [ 15.794286] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 15.794308] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 15.794350] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 15.800156] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 15.800238] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 15.802243] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz [ 15.802917] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 15.803045] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.851351] usb 2-1.7: USB disconnect, device number 5 [ 16.321959] DRXK driver version 0.9.4300 [ 16.677399] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro [ 16.954756] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 17.072721] usb 2-1.7: new full speed USB device number 6 using ehci_hcd [ 17.119512] init: Failed to spawn network-manager main process: unable to execute: No such file or directory [ 17.119933] init: modemmanager main process (1393) killed by TERM signal [ 17.169404] Bluetooth: Core ver 2.16 [ 17.169417] NET: Registered protocol family 31 [ 17.169418] Bluetooth: HCI device and connection manager initialized [ 17.169419] Bluetooth: HCI socket layer initialized [ 17.169420] Bluetooth: L2CAP socket layer initialized [ 17.169608] Bluetooth: SCO socket layer initialized [ 17.169786] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.169885] usbcore: registered new interface driver btusb [ 17.387797] init: failsafe main process (1344) killed by TERM signal [ 17.388082] init: apport pre-start process (1459) terminated with status 1 [ 17.391624] init: apport post-stop process (1492) terminated with status 1 [ 17.393657] init: lightdm main process (1468) killed by TERM signal [ 17.495743] [drm:i915_driver_open], [ 17.495770] [drm:i915_driver_open], [ 17.495899] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 17.495902] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 17.495918] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 17.495920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 17.495923] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 17.495925] [drm:intel_crt_detect], CRT not detected via hotplug [ 17.495928] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 17.495930] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 17.495931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 17.495934] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 17.495935] [drm:intel_crt_detect], CRT not detected via hotplug [ 17.495936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 17.495951] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 17.495953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 17.507108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 17.507112] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 17.507114] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 17.518275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 17.518303] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 17.518306] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 17.518818] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.524806] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.532801] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.540293] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.540298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 17.540306] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 17.540309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 17.540816] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.548830] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.556781] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.564279] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.564286] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 17.564336] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 17.564340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 17.575453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 17.575456] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 17.575457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 17.586577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 17.586590] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 17.586592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 17.704894] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 17.822952] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 17.822956] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 17.822957] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 17.822959] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 17.822961] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 17.822963] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 17.822966] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 17.822968] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 17.822975] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 17.823005] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 17.823007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 17.823514] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.828611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.829038] init: alsa-restore main process (1465) terminated with status 99 [ 17.836619] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.844105] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.844112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 17.844120] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 17.844123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 17.844630] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.852608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.860604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.868097] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.868106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 17.868157] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 17.868161] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 17.868668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.876593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.884588] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.892077] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.892084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 17.892092] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 17.892096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 17.892604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.900572] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.908572] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.916066] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.916075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 17.916152] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 17.916154] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 17.916158] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 17.916160] [drm:intel_crt_detect], CRT not detected via hotplug [ 17.916162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 17.916164] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 17.916166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 17.916168] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 17.916169] [drm:intel_crt_detect], CRT not detected via hotplug [ 17.916171] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 17.916185] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 17.916187] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 17.927306] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 17.927309] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 17.927310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 17.938445] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 17.938462] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 17.938463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 17.938969] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.944538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.952535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.960027] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.960031] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 17.960038] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 17.960041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 17.960547] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.968529] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.976518] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 17.984007] [drm:ironlake_dp_detect], DPCD: 0000 [ 17.984011] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 17.984057] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 17.984059] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 17.995251] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 17.995254] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 17.995256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 18.006400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 18.006417] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 18.006419] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 18.124926] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 18.242858] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 18.242861] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 18.242863] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 18.242865] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 18.242867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 18.242869] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.242871] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.242874] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 18.242881] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 18.243295] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 18.243297] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 18.243803] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.248349] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.256345] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.263839] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.263846] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 18.263854] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 18.263858] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 18.264365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.272345] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.280340] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.287831] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.287838] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 18.287882] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 18.287887] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 18.288394] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.296328] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.304319] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.311817] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.311823] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 18.311832] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 18.311835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 18.312342] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.320314] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.328310] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.335803] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.335812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 18.336990] [drm:drm_mode_addfb], [FB:27] [ 18.337030] [drm:drm_mode_setcrtc], [CRTC:3] [ 18.337032] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3] [ 18.337033] [drm:drm_crtc_helper_set_config], [ 18.337034] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 18.337038] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 18.339124] [drm:intel_pipe_set_base_atomic], Writing base 00363000 00000000 0 0 4096 [ 18.339127] [drm:intel_update_fbc], [ 18.344181] DVB: registering adapter 0 frontend 0 (DRXK DVB-C)... [ 18.344270] DVB: registering adapter 0 frontend 0 (DRXK DVB-T)... [ 18.352150] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 18.352803] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz [ 18.391762] [drm:intel_wait_for_vblank], vblank wait timed out [ 18.396430] [drm:i915_getparam], Unknown parameter 16 [ 18.410390] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.410393] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.410397] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 18.410398] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.410400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.410403] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.410404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.410406] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 18.410408] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.410409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.410412] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.410414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 18.421533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 18.421536] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.421537] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 18.432667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 18.432673] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 18.432675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 18.433180] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.440227] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.448221] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.455717] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.455724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 18.455736] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 18.455739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 18.456245] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.464216] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.472205] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.479708] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.479715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 18.479736] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 18.479741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 18.490870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 18.490874] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 18.490876] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 18.501978] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 18.501985] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 18.501986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 18.620167] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 18.738075] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 18.738078] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 18.738080] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 18.738082] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 18.738084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 18.738086] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.738088] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.738090] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 18.738100] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 18.738260] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 18.738262] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 18.738768] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.744039] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.752041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.759532] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.759539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 18.759554] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 18.759558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 18.760064] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.768031] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.768327] DRXK driver version 0.9.4300 [ 18.776018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.783508] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.783513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 18.783531] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 18.783535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 18.784041] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.792006] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.800001] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.807504] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.807511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 18.807526] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 18.807530] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 18.808037] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.816005] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.823999] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 18.831492] [drm:ironlake_dp_detect], DPCD: 0000 [ 18.831498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 18.834292] [drm:intel_crtc_cursor_set], [ 19.172645] Bluetooth: RFCOMM TTY layer initialized [ 19.172648] Bluetooth: RFCOMM socket layer initialized [ 19.172650] Bluetooth: RFCOMM ver 1.11 [ 19.173798] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.173800] Bluetooth: BNEP filters: protocol multicast [ 19.439916] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 19.439920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 19.439923] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 19.439925] [drm:intel_crt_detect], CRT not detected via hotplug [ 19.439927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 19.439930] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 19.439931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 19.439934] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 19.439935] [drm:intel_crt_detect], CRT not detected via hotplug [ 19.439936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 19.439941] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 19.439943] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 19.451128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 19.451133] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 19.451135] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 19.462276] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 19.462287] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 19.462289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 19.462795] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.467585] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.475593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.483079] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.483085] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 19.483101] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 19.483105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 19.483613] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.491571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.499577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.507070] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.507077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 19.507099] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 19.507103] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 19.518267] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 19.518270] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 19.518271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 19.529558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 19.529565] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 19.529566] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 19.647496] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 19.764950] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 19.764953] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 19.764954] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 19.764956] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 19.764958] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 19.764960] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 19.764962] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 19.764964] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 19.764970] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 19.765142] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 19.765144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 19.765649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.771398] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.779397] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.786891] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.786897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 19.786912] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 19.786916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 19.787423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.795389] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.803383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.810875] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.810882] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 19.810902] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 19.810906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 19.811413] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.819372] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.827367] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.834861] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.834867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 19.834882] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 19.834886] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 19.835392] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.843358] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.851363] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.858844] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.858851] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 19.887955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.899310] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.907316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.914808] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.915384] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.923304] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.931325] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.938796] [drm:ironlake_dp_detect], DPCD: 0000 [ 19.939389] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.947296] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.955295] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 19.962781] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.103119] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 20.103169] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 20.103171] [drm:intel_crt_detect], CRT not detected via hotplug [ 20.317759] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 20.317763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 20.317766] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 20.317768] [drm:intel_crt_detect], CRT not detected via hotplug [ 20.317770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 20.317773] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 20.317774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 20.317776] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 20.317778] [drm:intel_crt_detect], CRT not detected via hotplug [ 20.317779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 20.317783] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 20.317785] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 20.328984] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 20.328987] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 20.328989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 20.340150] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 20.340159] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 20.340161] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 20.340667] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.347039] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.355036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.362526] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.362532] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 20.362547] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 20.362551] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 20.363058] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.371027] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.379019] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.386515] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.386521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 20.386541] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 20.386545] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 20.397687] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 20.397690] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 20.397692] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 20.408887] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 20.408898] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 20.408900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 20.526934] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 20.644934] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 20.644937] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 20.644939] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 20.644941] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 20.644943] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 20.644945] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 20.644947] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 20.644949] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 20.644959] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 20.645126] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 20.645128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 20.645633] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.650853] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.658840] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.666339] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.666346] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 20.666361] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 20.666365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 20.666872] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.674833] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.682830] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.690320] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.690327] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 20.690347] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 20.690351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 20.690857] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.698814] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.706812] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.714306] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.714312] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 20.714327] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 20.714331] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 20.714839] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.722803] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.730798] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 20.738295] [drm:ironlake_dp_detect], DPCD: 0000 [ 20.738301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 20.866530] DVB: registering adapter 1 frontend 0 (DRXK DVB-C)... [ 20.866611] DVB: registering adapter 1 frontend 0 (DRXK DVB-T)... [ 20.883962] [drm:i915_driver_open], [ 20.884231] [drm:i915_getparam], Unknown parameter 16 [ 20.985912] ppdev: user-space parallel port driver [ 20.989591] audit_printk_skb: 51 callbacks suppressed [ 20.989593] type=1400 audit(1326834007.692:29): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2077 comm="apparmor_parser" [ 20.989864] type=1400 audit(1326834007.692:30): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2077 comm="apparmor_parser" [ 22.460009] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0 [ 22.729477] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 22.729481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 22.729484] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 22.729485] [drm:intel_crt_detect], CRT not detected via hotplug [ 22.729488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 22.729491] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 22.729492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 22.729494] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 22.729495] [drm:intel_crt_detect], CRT not detected via hotplug [ 22.729496] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 22.729501] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 22.729502] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 22.740636] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 22.740639] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 22.740640] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 22.751792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 22.751801] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 22.751802] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 22.752307] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.757522] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.765516] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.773003] [drm:ironlake_dp_detect], DPCD: 0000 [ 22.773007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 22.773017] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 22.773021] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 22.773526] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.781505] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.789501] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 22.796986] [drm:ironlake_dp_detect], DPCD: 0000 [ 22.796989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 22.797017] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 22.797020] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 22.808133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 22.808136] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 22.808137] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 22.819252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 22.819259] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 22.819261] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 22.936847] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 23.031629] EXT4-fs (sdb1): re-mounted. Opts: commit=0 [ 23.054616] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 23.054619] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 23.054620] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 23.054622] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 23.054624] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 23.054626] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 23.054628] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 23.054630] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 23.054637] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 23.054803] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 23.054805] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 23.055309] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.061339] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.069336] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.076828] [drm:ironlake_dp_detect], DPCD: 0000 [ 23.076835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 23.076850] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 23.076854] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 23.077362] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.085325] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.093322] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.100812] [drm:ironlake_dp_detect], DPCD: 0000 [ 23.100818] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 23.100838] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 23.100843] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 23.101351] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.109312] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.117303] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.124798] [drm:ironlake_dp_detect], DPCD: 0000 [ 23.124806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 23.124820] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 23.124824] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 23.125330] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.133291] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.141290] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 23.148781] [drm:ironlake_dp_detect], DPCD: 0000 [ 23.148787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 23.424770] init: plymouth-stop pre-start process (2131) terminated with status 1 [ 25.659192] eth0: no IPv6 routers present [ 27.514044] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 27.514051] [drm:intel_crt_detect], CRT not detected via hotplug [ 27.514055] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2 [ 27.525149] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2 [ 27.525655] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.530528] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.538525] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.546017] [drm:ironlake_dp_detect], DPCD: 0000 [ 27.546024] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2 [ 27.557150] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2 [ 27.674842] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 27.674843] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] status updated from 1 to 1 [ 27.675348] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.682436] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.690429] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.697924] [drm:ironlake_dp_detect], DPCD: 0000 [ 27.697930] [drm:output_poll_execute], [CONNECTOR:17:DP-2] status updated from 2 to 2 [ 27.698439] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.706423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.714415] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 27.721905] [drm:ironlake_dp_detect], DPCD: 0000 [ 27.721911] [drm:output_poll_execute], [CONNECTOR:19:DP-3] status updated from 2 to 2 [ 28.667104] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 28.667108] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 28.667471] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 38.714996] eth1: no IPv6 routers present [ 381.283935] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 381.283942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 381.283948] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 381.283952] [drm:intel_crt_detect], CRT not detected via hotplug [ 381.283957] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 381.283963] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 381.283966] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 381.283970] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 381.283973] [drm:intel_crt_detect], CRT not detected via hotplug [ 381.283976] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 381.283986] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 381.283989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 381.295257] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 381.295265] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 381.295268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 381.306436] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 381.306443] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 381.306444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 381.306950] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.311735] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.319732] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.327211] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.327217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 381.327232] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 381.327236] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 381.327744] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.335707] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.343722] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.351189] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.351195] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 381.351215] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 381.351220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 381.362479] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 381.362485] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 381.362489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 381.373801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 381.373810] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 381.373812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 381.492280] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 381.611485] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 381.611493] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 381.611496] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 381.611501] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 381.611506] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 381.611510] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 381.611515] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 381.611520] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 381.611535] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 381.611731] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 381.611733] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 381.612237] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.619462] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.627448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.634934] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.634940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 381.634955] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 381.634959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 381.635467] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.643442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.651423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.658912] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.658919] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 381.658938] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 381.658942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 381.659450] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.667416] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.675403] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.682891] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.682897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 381.682912] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 381.682916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 381.683423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.691395] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.699381] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.706869] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.706876] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 381.857114] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 381.857119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 381.857122] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 381.857124] [drm:intel_crt_detect], CRT not detected via hotplug [ 381.857127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 381.857130] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 381.857131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 381.857133] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 381.857134] [drm:intel_crt_detect], CRT not detected via hotplug [ 381.857136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 381.857141] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 381.857142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 381.868351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 381.868355] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 381.868357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 381.879500] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 381.879506] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 381.879508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 381.880015] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.887214] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.895229] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.902696] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.902702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 381.902717] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 381.902721] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 381.903228] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.911193] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.919191] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 381.926777] [drm:ironlake_dp_detect], DPCD: 0000 [ 381.926792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 381.926801] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 381.926803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 381.938111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 381.938120] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 381.938123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 381.949283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 381.949287] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 381.949289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 382.067991] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 382.186643] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 382.186650] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 382.186654] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 382.186659] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 382.186663] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 382.186667] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 382.186672] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 382.186678] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 382.186700] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 382.187054] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 382.187058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 382.187567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.194962] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.202933] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.210420] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.210426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 382.210441] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 382.210445] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 382.210953] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.218925] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.226909] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.234400] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.234406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 382.234425] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 382.234430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 382.234937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.242904] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.250888] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.258377] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.258384] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 382.258398] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 382.258402] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 382.258909] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.266883] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.274868] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.282358] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.282364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 382.765971] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 382.765975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 382.765979] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 382.765981] [drm:intel_crt_detect], CRT not detected via hotplug [ 382.765983] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 382.765986] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 382.765988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 382.765990] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 382.765991] [drm:intel_crt_detect], CRT not detected via hotplug [ 382.765992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 382.765997] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 382.765999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 382.777251] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 382.777260] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 382.777263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 382.788503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 382.788522] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 382.788525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 382.789030] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.794403] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.802384] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.809871] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.809874] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 382.809894] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 382.809906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 382.810412] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.818403] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.826376] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 382.833868] [drm:ironlake_dp_detect], DPCD: 0000 [ 382.833875] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 382.833896] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 382.833900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 382.845148] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 382.845154] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 382.845157] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 382.856445] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 382.856460] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 382.856464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 382.974510] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 383.093160] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 383.093168] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 383.093172] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 383.093177] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 383.093181] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 383.093185] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 383.093190] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 383.093195] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 383.093213] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 383.093398] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 383.093400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 383.093906] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.102118] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.110121] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.117623] [drm:ironlake_dp_detect], DPCD: 0000 [ 383.117632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 383.117649] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 383.117653] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 383.118162] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.126105] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.134098] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.141598] [drm:ironlake_dp_detect], DPCD: 0000 [ 383.141605] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 383.141625] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 383.141629] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 383.142136] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.150084] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.158080] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.165593] [drm:ironlake_dp_detect], DPCD: 0000 [ 383.165603] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 383.165618] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 383.165621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 383.166129] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.174064] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.182058] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 383.189554] [drm:ironlake_dp_detect], DPCD: 0000 [ 383.189561] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 391.290376] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 391.290383] [drm:intel_crt_detect], CRT not detected via hotplug [ 391.290387] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2 [ 391.301663] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2 [ 391.302172] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.306839] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.314833] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.322323] [drm:ironlake_dp_detect], DPCD: 0000 [ 391.322329] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2 [ 391.333565] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2 [ 391.452792] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 391.452795] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-3] status updated from 1 to 1 [ 391.453304] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.458705] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.466701] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.474192] [drm:ironlake_dp_detect], DPCD: 0000 [ 391.474198] [drm:output_poll_execute], [CONNECTOR:17:DP-2] status updated from 2 to 2 [ 391.474707] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.482685] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.490678] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 391.498171] [drm:ironlake_dp_detect], DPCD: 0000 [ 391.498177] [drm:output_poll_execute], [CONNECTOR:19:DP-3] status updated from 2 to 2 [ 441.665593] [drm:intel_crtc_cursor_set], [ 441.665598] [drm:intel_crtc_cursor_set], cursor off [ 441.665654] [drm:intel_crtc_cursor_set], [ 456.517025] [drm:intel_crtc_cursor_set], [ 456.517031] [drm:intel_crtc_cursor_set], cursor off [ 458.534074] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 458.534081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 458.534087] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 458.534091] [drm:intel_crt_detect], CRT not detected via hotplug [ 458.534095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 458.534101] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 458.534104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 458.534108] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 458.534111] [drm:intel_crt_detect], CRT not detected via hotplug [ 458.534113] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 458.534122] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 458.534125] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 458.545437] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 458.545440] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 458.545442] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 458.556529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 458.556537] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 458.556538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 458.557044] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.565235] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.573232] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.580731] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.580739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 458.580754] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 458.580758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 458.581267] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.589220] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.597211] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.604723] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.604730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 458.604751] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 458.604755] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 458.616028] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 458.616038] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 458.616041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 458.627208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 458.627212] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 458.627214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 458.745557] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 458.864855] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 458.864863] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 458.864866] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 458.864872] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 458.864876] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 458.864879] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 458.864885] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 458.864890] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 458.864905] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 458.865264] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 458.865268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 458.865776] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.872986] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.880980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.888469] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.888476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 458.888490] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 458.888494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 458.889003] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.896967] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.904966] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.912448] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.912455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 458.912478] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 458.912485] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 458.912999] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.920946] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.928942] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.936428] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.936434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 458.936449] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 458.936453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 458.936961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.944927] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.952923] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 458.960410] [drm:ironlake_dp_detect], DPCD: 0000 [ 458.960417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 458.969815] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 458.969821] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 458.969826] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 458.969830] [drm:intel_crt_detect], CRT not detected via hotplug [ 458.969833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 458.969838] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 458.969841] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 458.969845] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 458.969848] [drm:intel_crt_detect], CRT not detected via hotplug [ 458.969851] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 458.969858] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 458.969861] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 458.981128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 458.981136] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 458.981139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 458.992381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 458.992409] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 458.992412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 458.992918] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.004886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.012886] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.020362] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.020369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.020384] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 459.020387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 459.020896] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.028858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.036878] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.044342] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.044348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.044368] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.044372] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.055630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.055642] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.055645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.066820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.066824] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 459.066825] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 459.184407] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 459.302858] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 459.302875] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 459.302879] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 459.302884] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 459.302888] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 459.302892] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 459.302897] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 459.302902] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 459.302919] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 459.303268] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 459.303272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 459.303779] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.308625] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.316619] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.324115] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.324121] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 459.324136] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 459.324140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 459.324647] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.332604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.340599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.348094] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.348101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 459.348120] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 459.348124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 459.348631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.356583] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.364578] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.372075] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.372081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 459.372096] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 459.372100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 459.372607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.380566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.388559] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.396054] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.396061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 459.410330] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 459.410337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 459.410343] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 459.410346] [drm:intel_crt_detect], CRT not detected via hotplug [ 459.410350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 459.410356] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 459.410359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 459.410363] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 459.410366] [drm:intel_crt_detect], CRT not detected via hotplug [ 459.410369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 459.410376] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 459.410380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 459.421648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 459.421651] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 459.421653] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 459.432787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 459.432793] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 459.432795] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 459.433301] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.444520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.452503] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.459994] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.460000] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.460015] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 459.460019] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 459.460527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.468499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.476487] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.483974] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.483981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.484000] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.484005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.495269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.495279] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.495282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.506528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.506537] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 459.506541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 459.624286] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 459.742734] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 459.742741] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 459.742744] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 459.742749] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 459.742754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 459.742757] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 459.742762] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 459.742767] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 459.742781] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 459.742958] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 459.742960] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 459.743464] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.748261] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.756260] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.763742] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.763749] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 459.763763] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 459.763767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 459.764276] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.772239] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.780240] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.787722] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.787729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 459.787749] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 459.787753] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 459.788261] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.796218] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.804219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.811703] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.811709] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 459.811724] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 459.811728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 459.812236] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.820200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.828201] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.835683] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.835689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 459.843315] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 459.843322] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 459.843327] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 459.843331] [drm:intel_crt_detect], CRT not detected via hotplug [ 459.843334] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 459.843339] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 459.843342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 459.843346] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 459.843349] [drm:intel_crt_detect], CRT not detected via hotplug [ 459.843352] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 459.843359] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 459.843362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 459.854640] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 459.854649] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 459.854652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 459.865881] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 459.865888] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 459.865889] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 459.866395] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.872153] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.880151] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.887654] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.887661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.887677] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 459.887681] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 459.888189] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.896139] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.904127] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 459.911640] [drm:ironlake_dp_detect], DPCD: 0000 [ 459.911646] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 459.911666] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.911670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.922901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.922906] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 459.922909] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 459.934073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 459.934078] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 459.934079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 460.051738] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 460.171005] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 460.171012] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 460.171015] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 460.171020] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 460.171024] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 460.171028] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 460.171033] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 460.171038] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 460.171051] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 460.171361] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 460.171365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 460.171873] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.179897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.187898] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.195380] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.195386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 460.195401] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 460.195405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 460.195912] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.203872] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.211877] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.219360] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.219367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 460.219387] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 460.219391] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 460.219897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.227857] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.235860] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.243344] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.243351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 460.243365] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 460.243369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 460.243876] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.251841] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.259842] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.267324] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.267330] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 460.272869] [drm:drm_mode_addfb], [FB:29] [ 460.272914] [drm:drm_mode_setcrtc], [CRTC:3] [ 460.272918] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3] [ 460.272921] [drm:drm_crtc_helper_set_config], [ 460.272924] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:29] #connectors=1 (x y) (0 0) [ 460.272932] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 460.283576] [drm:intel_pipe_set_base_atomic], Writing base 030C4000 00000000 0 0 7680 [ 460.283583] [drm:intel_update_fbc], [ 460.295816] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 460.339266] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.342380] [drm:drm_mode_setcrtc], [CRTC:3] [ 460.342390] [drm:drm_mode_setcrtc], [CONNECTOR:16:HDMI-A-3] [ 460.342394] [drm:drm_crtc_helper_set_config], [ 460.342397] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:29] #connectors=1 (x y) (0 0) [ 460.342408] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 460.342413] [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 460.342420] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x0 0x15 [ 460.342429] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] to [CRTC:3] [ 460.342434] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 460.342437] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x0 0x15 [ 460.342446] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 460.395227] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.419614] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 460.419621] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 460.419625] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 460.419629] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 460.419633] [drm:intel_update_fbc], [ 460.419870] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 460.419873] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x0 0x15 [ 460.475160] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.475167] [drm:intel_pipe_set_base_atomic], Writing base 030C4000 00000000 0 0 7680 [ 460.475172] [drm:intel_update_fbc], [ 460.531108] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.531114] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 460.531118] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 460.531122] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 460.531126] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 460.531131] [drm:drm_crtc_helper_set_mode], [ENCODER:15:TMDS-15] set [MODE:27:] [ 460.531137] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 460.531141] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 460.531145] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6 [ 460.531148] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6 [ 460.587068] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.643021] [drm:intel_wait_for_vblank], vblank wait timed out [ 460.643826] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 460.643830] [drm:gen6_fdi_link_train], FDI train 1 done. [ 460.644481] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 460.644484] [drm:gen6_fdi_link_train], FDI train 2 done. [ 460.644486] [drm:gen6_fdi_link_train], FDI train done. [ 460.645695] [drm:intel_update_fbc], [ 460.645704] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 460.645708] [drm:drm_crtc_helper_set_config], [CONNECTOR:16:HDMI-A-3] set DPMS on [ 460.665661] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 460.714427] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 460.714435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 460.714441] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 460.714446] [drm:intel_crt_detect], CRT not detected via hotplug [ 460.714451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 460.714458] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 460.714462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 460.714467] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 460.714471] [drm:intel_crt_detect], CRT not detected via hotplug [ 460.714475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 460.714485] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 460.714489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 460.725779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 460.725790] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 460.725796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 460.736998] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 460.737013] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 460.737016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 460.737522] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.743419] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.751443] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.758921] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.758935] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 460.758959] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 460.758962] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 460.759467] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.767423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.775440] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 460.782908] [drm:ironlake_dp_detect], DPCD: 0000 [ 460.782912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 460.782931] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 460.782933] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 460.794051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 460.794054] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 460.794055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 460.805192] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 460.805199] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 460.805201] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 460.923533] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 461.042056] [drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 461.042064] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 461.042067] [drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 461.042072] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 461.042077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 461.042081] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 461.042086] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 461.042091] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 461.042114] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 461.042470] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 461.042474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 461.042984] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.051182] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.059167] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.066657] [drm:ironlake_dp_detect], DPCD: 0000 [ 461.066664] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 461.066678] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 461.066682] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 461.067190] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.075157] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.083149] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.090637] [drm:ironlake_dp_detect], DPCD: 0000 [ 461.090643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 461.090663] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 461.090667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 461.091174] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.099144] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.107136] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.114621] [drm:ironlake_dp_detect], DPCD: 0000 [ 461.114627] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 461.114642] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 461.114646] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 461.115154] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.123126] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.131111] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 461.138600] [drm:ironlake_dp_detect], DPCD: 0000 [ 461.138607] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 464.170721] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 464.170728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 464.170734] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 464.170738] [drm:intel_crt_detect], CRT not detected via hotplug [ 464.170742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 464.170748] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 464.170751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 464.170755] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 464.170758] [drm:intel_crt_detect], CRT not detected via hotplug [ 464.170761] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 464.170770] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 464.170773] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 464.182030] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 464.182035] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 464.182038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 464.193271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 464.193276] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 464.193278] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 464.193784] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.200567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.208562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.216058] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.216064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 464.216079] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 464.216083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] [ 464.216591] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.224549] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.232545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.240035] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.240041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected [ 464.240061] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 464.240066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 464.251311] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 464.251320] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 464.251324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 464.262442] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 464.262447] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 464.262449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] [ 464.380731] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 464.500123] [drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 464.500131] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 464.500134] [drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15 [ 464.500139] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7 [ 464.500144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-3] probed modes : [ 464.500147] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 464.500153] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 464.500158] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 464.500173] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 464.500504] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 464.500508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 464.501015] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.508315] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.516319] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.523797] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.523803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 464.523818] [drm:drm_mode_getconnector], [CONNECTOR:17:?] [ 464.523823] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] [ 464.524330] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.532295] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.540296] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.547777] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.547784] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected [ 464.547804] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 464.547808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 464.548317] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.556273] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.564277] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.571757] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.571764] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected [ 464.571778] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 464.571782] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] [ 464.572289] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.580255] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.588256] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 464.595738] [drm:ironlake_dp_detect], DPCD: 0000 [ 464.595745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-3] disconnected
Quoted 10,668 lines
-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: 17 January 2012 21:26
To: Alfonso Fiore
Cc: Angela Schmid; [email protected]; Rodrigo Vivi
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not workingQuoted 7 lines · Daniel Vetter
Hi all,
To debug modeset issues we usually need a full dmesg with drm.debug=0xe added to the kernel command line. Can you please attach that?
Also, Rodrigo is trying to improve our hdmi/tv support, maybe he's got an idea, cc'ed.
Meh, forgotten to put him actually on cc ;-)
Quoted 10,645 lines
Yours, Daniel
Quoted 10,636 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
thank you,
alfonsoQuoted 10,600 lines · Angela Schmid
Hello****
** **
I have a Philips 37pf9830 television (at 1920x1080 only interlace possible) over Sandy Bridge HDMI. Changing to 1920x1080i is not working.** **
Nvidia noveau with GTX275 (using yellow
DVI->HDMIAdapter) , grub2 (vesa?), Windows 7 over HDMI and a Windows 7 laptop with AMD graphics with HDMI all work fine.****** **
xorg.conf is empty and use the following command:****
** **
xrandr --newmode "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync****
xrandr --addmode HDMI3 "1920x1080i"****
xrandr --output HDMI3 --mode "1920x1080i"****
** **
The desktop is half and moved to the left. The television is flickering.** **
I tried several other modelines, which work for the noveau driver, but not for the intel driver.****
The highest resolution possible is "1280x720@50hz" 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync****** **
When using only HDMI grub2 will start in 1080i but xorg is not visible afterwards. ****
For booting I have to add a DVI display to start grub2 in a lower resolution. Either disconnect as soon as possible or I use xrandr –output VGA1 –off****
** **
Is interlace working with the intel driver ? Any help appreciated.****
Will there be soon support (otherwise I have to buy a NV adapter) ?****
** **
Cheers****
Angela****
** **
System environment:
-- chipset: Sandy Bridge (2600k)
-- system architecture: 64-bit
-- xf86-video-intel: ppa/xorg-edgers: xserver-xorg-video-intel 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric****-- xserver: 1.11.2.902 (1.11.3 RC2)(10 December 2011...) -- mesa: 3.0 Mesa 8.0-devel****
libegl1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libegl1-mesa-drivers/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-dri/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libgl1-mesa-glx/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglapi-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libglu1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
libopenvg1-mesa/oneiric uptodate 8.0.0~git20120110.5a7c3433-0ubuntu0sarvatt~oneiric****
mesa-utils/oneiric uptodate 8.0.1+git20110129+d8f7d6b-0ubuntu2 -- libdrm:****
libdrm-intel1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-nouveau1a/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm-radeon1/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric****
libdrm2/oneiric uptodate 2.4.30+git20120110.66518ab5-0ubuntu0sarvatt~oneiric -- kernel: 3.0.0-14-generic
-- Linux distribution: Ubuntu
-- Machine or mobo model: Asus P8Z68-V PRO -- Display connector: HDMIReproducing steps:
Additional info:****
Intel****
Xrandr****
dmesg****
Xorg.0.log****
Noveau****
Xrandr****
Xorg.0.log****
** **
** **
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192****
VGA1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x41**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: ****HDMI1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x42**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP1 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x43**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off auto on ****HDMI2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x44**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
HDMI3 connected 1920x1080+0+0 (
0xb8) normal (normal left inverted right x axis y axis) 640mm x 360mm****Identifier: 0x45**** Timestamp: 102654**** Subpixel: unknown**** Gamma: 1.0:1.0:1.0**** Brightness: 1.0**** Clones: **** CRTC: 0**** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** EDID:**** 00ffffffffffff00410c000001010101**** 00000103804024780ae692a3544a9926**** 0f4a4c21080001010101010101010101**** 010101010101011d80d0721c1620102c**** 258080682100009e011d8018711c1620**** 582c250080682100009e000000fc0050**** 68696c697073204654560a20000000fd**** 00303e0f3209000a20202020202001e3**** 020324f04b0103040506071213141516**** 29091f07150750190786830100006503**** 0c002000011d00bc52d01e20b8285540**** 80682100001e011d007251d01e206e28**** 550080682100001e8c0ad09020403120**** 0c4055008068210000188c0ad08a20e0**** 2d10103e960080682100001800000000**** 0000000000000000000000000000002a**** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
1024x768 (
0x48) 65.0MHz -HSync -VSync****h: width 1024 start 1048 end 1184 total 1344 skew 0 clock48.4KHz****
v: height 768 start 771 end 777 total 806 clock
60.0Hz****800x600 (
0x49) 40.0MHz +HSync +VSync****h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz****v: height 600 start 601 end 605 total 628 clock
60.3Hz****640x480 (
0x4a) 25.2MHz -HSync -VSync****h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz****v: height 480 start 490 end 492 total 525 clock
60.0Hz****194144_1920x1080ix0.0 (
0xb8) 74.2MHz +HSync +VSync Interlace *current*
***h: width 1920 start 2448 end 2492 total 2640 skew 0 clock28.1KHz****
v: height 1080 start 1084 end 1094 total 1125 clock25.0Hz****
DP2 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x46**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
DP3 disconnected (normal left inverted right x axis y axis)****
Identifier: 0x47**** Timestamp: 102654**** Subpixel: unknown**** Clones: **** CRTCs: 0 1**** Transform: 1.000000 0.000000 0.000000**** 0.000000 1.000000 0.000000**** 0.000000 0.000000 1.000000**** filter: **** Broadcast RGB: Full**** supported: Full Limited 16:2**** audio: auto**** supported: off autoon ****
** **
** **
[ 0.000000] Initializing cgroup subsys cpuset****[ 0.000000] Initializing cgroup subsys cpu****[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gccversion 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)****
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] KERNEL supported cpus:****[ 0.000000] Intel GenuineIntel****[ 0.000000] AMD AuthenticAMD****[ 0.000000] Centaur CentaurHauls****[ 0.000000] BIOS-provided physical RAM map:****[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)****
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)****
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)****
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)****
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)****
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)****
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000be5cc000 (usable)****
[ 0.000000] BIOS-e820: 00000000be5cc000 - 00000000be628000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000be628000 - 00000000beb36000 (reserved)****
[ 0.000000] BIOS-e820: 00000000beb36000 - 00000000beb39000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beb39000 - 00000000bed9f000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bed9f000 - 00000000bedb0000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedb0000 - 00000000bedc7000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedc7000 - 00000000bedc9000 (usable)****
[ 0.000000] BIOS-e820: 00000000bedc9000 - 00000000bedca000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bedca000 - 00000000bedd2000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bedd2000 - 00000000beddc000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000beddc000 - 00000000bee38000 (reserved)****
[ 0.000000] BIOS-e820: 00000000bee38000 - 00000000bee7b000 (ACPI NVS)****
[ 0.000000] BIOS-e820: 00000000bee7b000 - 00000000bf000000 (usable)****
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000cfa00000 (reserved)****
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)****
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)****
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)****
[ 0.000000] NX (Execute Disable) protection: active****[ 0.000000] DMI 2.6 present.****[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO,BIOS 1101 11/23/2011****
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000(usable) ==> (reserved)****
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000(usable)****
[ 0.000000] No AGP bridge found****[ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000****[ 0.000000] MTRR default type: uncachable****[ 0.000000] MTRR fixed ranges enabled:****[ 0.000000] 00000-9FFFF write-back****[ 0.000000] A0000-BFFFF uncachable****[ 0.000000] C0000-D3FFF write-protect****[ 0.000000] D4000-E7FFF uncachable****[ 0.000000] E8000-FFFFF write-protect****[ 0.000000] MTRR variable ranges enabled:****[ 0.000000] 0 base 000000000 mask E00000000 write-back****[ 0.000000] 1 base 200000000 mask FC0000000 write-back****[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable****[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable****[ 0.000000] 4 base 22FE00000 mask FFFE00000 uncachable****[ 0.000000] 5 base 230000000 mask FF0000000 uncachable****[ 0.000000] 6 disabled****[ 0.000000] 7 disabled****[ 0.000000] 8 disabled****[ 0.000000] 9 disabled****[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new0x7010600070106****
[ 0.000000] original variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB****[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 3GB, range: 1GB, type UC****[ 0.000000] reg 4, base: 8958MB, range: 2MB, type UC****[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC****[ 0.000000] total RAM covered: 7926M****[ 0.000000] Found optimal setting for mtrr clean up****[ 0.000000] gran_size: 64K chunk_size: 16M
num_reg: 7 lose cover RAM: 0G****[ 0.000000] New variable MTRRs****[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB****[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB****[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC****[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB****[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB****[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB****[ 0.000000] reg 6, base: 8958MB, range: 2MB, type UC****[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000(usable) ==> (reserved)****
[ 0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000****[ 0.000000] found SMP MP-table at [ffff8800000fcf10] fcf10****[ 0.000000] initial memory mapped : 0 - 20000000****[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size20480****
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf000000****[ 0.000000] 0000000000 - 00bf000000 page 2M****[ 0.000000] kernel direct mapping tables up to bf000000 @1fffc000-20000000****
[ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000****[ 0.000000] 0100000000 - 022fe00000 page 2M****[ 0.000000] kernel direct mapping tables up to 22fe00000 @beff6000-bf000000****
[ 0.000000] RAMDISK: 358ee000 - 36c6f000****[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)****[ 0.000000] ACPI: XSDT 00000000be61d068 0004C (v01 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: FACP 00000000be627250 000F4 (v04 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: DSDT 00000000be61d140 0A10B (v02 ALASKA A M I00000000 INTL 20051117)****
[ 0.000000] ACPI: FACS 00000000bedd3f80 00040****[ 0.000000] ACPI: APIC 00000000be627348 00092 (v03 ALASKA A M I01072009 AMI 00010013)****
[ 0.000000] ACPI: SSDT 00000000be6273e0 001D6 (v01 AMICPU PROC00000001 MSFT 03000001)****
[ 0.000000] ACPI: MCFG 00000000be6275b8 0003C (v01 ALASKA A M I01072009 MSFT 00000097)****
[ 0.000000] ACPI: HPET 00000000be6275f8 00038 (v01 ALASKA A M I01072009 AMI. 00000004)****
[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] No NUMA configuration found****[ 0.000000] Faking a node at 0000000000000000-000000022fe00000****[ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000****[ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff]****[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->[ffff880227800000-ffff88022e5fffff] on node 0****
[ 0.000000] Zone PFN ranges:****[ 0.000000] DMA 0x00000010 -> 0x00001000****[ 0.000000] DMA32 0x00001000 -> 0x00100000****[ 0.000000] Normal 0x00100000 -> 0x0022fe00****[ 0.000000] Movable zone start PFN for each node****[ 0.000000] early_node_map[7] active PFN ranges****[ 0.000000] 0: 0x00000010 -> 0x0000009b****[ 0.000000] 0: 0x00000100 -> 0x00020000****[ 0.000000] 0: 0x00020200 -> 0x00040000****[ 0.000000] 0: 0x00040200 -> 0x000be5cc****[ 0.000000] 0: 0x000bedc7 -> 0x000bedc9****[ 0.000000] 0: 0x000bee7b -> 0x000bf000****[ 0.000000] 0: 0x00100000 -> 0x0022fe00****[ 0.000000] On node 0 totalpages: 2023646****[ 0.000000] DMA zone: 56 pages used for memmap****[ 0.000000] DMA zone: 5 pages reserved****[ 0.000000] DMA zone: 3918 pages, LIFO batch:0****[ 0.000000] DMA32 zone: 14280 pages used for memmap****[ 0.000000] DMA32 zone: 760715 pages, LIFO batch:31****[ 0.000000] Normal zone: 17017 pages used for memmap****[ 0.000000] Normal zone: 1227655 pages, LIFO batch:31****[ 0.000000] ACPI: PM-Timer IO Port: 0x408****[ 0.000000] ACPI: Local APIC address 0xfee00000****[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)****[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)****[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])****[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])****[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI0-23****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)****
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)****
[ 0.000000] ACPI: IRQ0 used by override.****[ 0.000000] ACPI: IRQ2 used by override.****[ 0.000000] ACPI: IRQ9 used by override.****[ 0.000000] Using ACPI (MADT) for SMP configuration information****[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000****[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs****[ 0.000000] nr_irqs_gsi: 40****[ 0.000000] PM: Registered nosave memory: 000000000009b000 -000000000009c000****
[ 0.000000] PM: Registered nosave memory: 000000000009c000 -00000000000a0000****
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -00000000000e0000****
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -0000000000100000****
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -0000000020200000****
[ 0.000000] PM: Registered nosave memory: 0000000040000000 -0000000040200000****
[ 0.000000] PM: Registered nosave memory: 00000000be5cc000 -00000000be628000****
[ 0.000000] PM: Registered nosave memory: 00000000be628000 -00000000beb36000****
[ 0.000000] PM: Registered nosave memory: 00000000beb36000 -00000000beb39000****
[ 0.000000] PM: Registered nosave memory: 00000000beb39000 -00000000bed9f000****
[ 0.000000] PM: Registered nosave memory: 00000000bed9f000 -00000000bedb0000****
[ 0.000000] PM: Registered nosave memory: 00000000bedb0000 -00000000bedc7000****
[ 0.000000] PM: Registered nosave memory: 00000000bedc9000 -00000000bedca000****
[ 0.000000] PM: Registered nosave memory: 00000000bedca000 -00000000bedd2000****
[ 0.000000] PM: Registered nosave memory: 00000000bedd2000 -00000000beddc000****
[ 0.000000] PM: Registered nosave memory: 00000000beddc000 -00000000bee38000****
[ 0.000000] PM: Registered nosave memory: 00000000bee38000 -00000000bee7b000****
[ 0.000000] PM: Registered nosave memory: 00000000bf000000 -00000000bf800000****
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 -00000000cfa00000****
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 -00000000fed1c000****
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -00000000fed20000****
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -00000000ff000000****
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -0000000100000000****
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap:cfa00000:2f31c000)****
[ 0.000000] Booting paravirtualized kernel on bare hardware****[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8nr_node_ids:1****
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79616r8192 d22784 u262144****
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152****[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 ****[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 1992288****
[ 0.000000] Policy zone: Normal****[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-14-genericroot=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro drm.debug=0x06****
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)****[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340****[ 0.000000] Checking aperture...****[ 0.000000] No AGP bridge found****[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area****[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -bailing!****
[ 0.000000] Memory: 7881468k/9172992k available (6109k kernel code,1078408k absent, 213116k reserved, 4876k data, 984k init)****
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,CPUs=8, Nodes=1****
[ 0.000000] Hierarchical RCU implementation.****[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.****
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16****[ 0.000000] Extended CMOS year: 2000****[ 0.000000] Console: colour dummy device 80x25****[ 0.000000] console [tty0] enabled****[ 0.000000] allocated 65011712 bytes of page_cgroup****[ 0.000000] please try 'cgroup_disable=memory' option if you don't wantmemory cgroups****
[ 0.000000] hpet clockevent registered****[ 0.000000] Fast TSC calibration using PIT****[ 0.004000] Detected 3410.641 MHz processor.****[ 0.000002] Calibrating delay loop (skipped), value calculated usingtimer frequency.. 6821.28 BogoMIPS (lpj=13642564)****
[ 0.000006] pid_max: default: 32768 minimum: 301****[ 0.000023] Security Framework initialized****[ 0.000032] AppArmor: AppArmor initialized****[ 0.000034] Yama: becoming mindful.****[ 0.000562] Dentry cache hash table entries: 1048576 (order: 11,8388608 bytes)****
[ 0.001795] Inode-cache hash table entries: 524288 (order: 10, 4194304bytes)****
[ 0.002278] Mount-cache hash table entries: 256****[ 0.002349] Initializing cgroup subsys cpuacct****[ 0.002353] Initializing cgroup subsys memory****[ 0.002358] Initializing cgroup subsys devices****[ 0.002360] Initializing cgroup subsys freezer****[ 0.002362] Initializing cgroup subsys net_cls****[ 0.002364] Initializing cgroup subsys blkio****[ 0.002369] Initializing cgroup subsys perf_event****[ 0.002387] CPU: Physical Processor ID: 0****[ 0.002389] CPU: Processor Core ID: 0****[ 0.002394] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'****[ 0.002394] ENERGY_PERF_BIAS: View and update withx86_energy_perf_policy(8)****
[ 0.002399] mce: CPU supports 9 MCE banks****[ 0.002409] CPU0: Thermal monitoring enabled (TM1)****[ 0.002417] using mwait in idle threads.****[ 0.004052] ACPI: Core revision 20110413****[ 0.219039] ftrace: allocating 25647 entries in 101 pages****[ 0.225855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1****[ 0.265509] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07****
[ 0.372139] Performance Events: PEBS fmt1+, SandyBridge events, IntelPMU driver.****
[ 0.372145] ... version: 3****[ 0.372146] ... bit width: 48****[ 0.372148] ... generic registers: 4****[ 0.372149] ... value mask: 0000ffffffffffff****[ 0.372151] ... max period: 000000007fffffff****[ 0.372153] ... fixed-purpose events: 3****[ 0.372154] ... event mask: 000000070000000f****[ 0.372410] Booting Node 0, Processors #1****[ 0.372412] smpboot cpu 1: start_ip = 96000****[ 0.480208] #2****[ 0.480211] smpboot cpu 2: start_ip = 96000****[ 0.588103] #3****[ 0.588106] smpboot cpu 3: start_ip = 96000****[ 0.696095] #4****[ 0.696098] smpboot cpu 4: start_ip = 96000****[ 0.803954] #5****[ 0.803957] smpboot cpu 5: start_ip = 96000****[ 0.911949] #6****[ 0.911951] smpboot cpu 6: start_ip = 96000****[ 1.019844] #7 Ok.****[ 1.019848] smpboot cpu 7: start_ip = 96000****[ 1.127692] Brought up 8 CPUs****[ 1.127696] Total of 8 processors activated (54575.83 BogoMIPS).****[ 1.132439] devtmpfs: initialized****[ 1.132522] PM: Registering ACPI NVS region at be5cc000 (376832 bytes)****
[ 1.132528] PM: Registering ACPI NVS region at beb36000 (12288 bytes)****
[ 1.132531] PM: Registering ACPI NVS region at bed9f000 (69632 bytes)****
[ 1.132533] PM: Registering ACPI NVS region at bedc9000 (4096 bytes)****
[ 1.132535] PM: Registering ACPI NVS region at bedd2000 (40960 bytes)****
[ 1.132538] PM: Registering ACPI NVS region at bee38000 (274432 bytes)****
[ 1.133403] print_constraints: dummy: ****[ 1.133428] Time: 18:40:04 Date: 01/17/12****[ 1.133450] NET: Registered protocol family 16****[ 1.133513] Trying to unpack rootfs image as initramfs...****[ 1.133517] ACPI: bus type pci registered****[ 1.133553] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.133557] PCI: not using MMCONFIG****[ 1.133558] PCI: Using configuration type 1 for base access****[ 1.133982] bio: create slab <bio-0> at 0****[ 1.134828] ACPI: EC: Look up EC in DSDT****[ 1.135589] ACPI: Executed 1 blocks of module-level executable AML code****
[ 1.137110] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND(20110413/psargs-359)****
[ 1.137116] ACPI Exception: AE_NOT_FOUND, Could not execute argumentsfor [RAMW] (Region) (20110413/nsinit-349)****
[ 1.137292] ACPI: SSDT 00000000bedd2818 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137570] ACPI: Dynamic OEM Table Load:****[ 1.137573] ACPI: SSDT (null) 0079C (v01 AMI IST00000001 MSFT 03000001)****
[ 1.137601] ACPI: SSDT 00000000bedd9a18 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.137820] ACPI: Dynamic OEM Table Load:****[ 1.137822] ACPI: SSDT (null) 0021C (v01 AMI CST00000001 MSFT 03000001)****
[ 1.138317] ACPI: Interpreter enabled****[ 1.138320] ACPI: (supports S0 S1 S3 S4 S5)****[ 1.138333] ACPI: Using IOAPIC for interrupt routing****[ 1.138348] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000)****
[ 1.138384] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved inACPI motherboard resources****
[ 1.149715] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored****[ 1.152841] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =0x62****
[ 1.152951] ACPI: No dock devices found.****[ 1.152954] HEST: Table not found.****[ 1.152956] PCI: Using host bridge windows from ACPI; if necessary, use"pci=nocrs" and report a bug****
[ 1.153066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])****[ 1.153184] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]****
[ 1.153187] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]****
[ 1.153189] pci_root PNP0A08:00: host bridge window [mem0x000a0000-0x000bffff]****
[ 1.153192] pci_root PNP0A08:00: host bridge window [mem0x000c8000-0x000dffff]****
[ 1.153195] pci_root PNP0A08:00: host bridge window [mem0xcfa00000-0xffffffff]****
[ 1.153199] pci_root PNP0A08:00: address space collision: host bridgewindow [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]****
[ 1.153208] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600****[ 1.153232] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604****[ 1.153249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold****[ 1.153251] pci 0000:00:01.0: PME# disabled****[ 1.153265] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300****[ 1.153272] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]****
[ 1.153276] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bitpref]****
[ 1.153280] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]****[ 1.153320] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780****[ 1.153341] pci 0000:00:16.0: reg 10: [mem 0xfbd29000-0xfbd2900f 64bit]****
[ 1.153398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold****[ 1.153401] pci 0000:00:16.0: PME# disabled****[ 1.153428] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200****[ 1.153444] pci 0000:00:19.0: reg 10: [mem 0xfbd00000-0xfbd1ffff]****[ 1.153452] pci 0000:00:19.0: reg 14: [mem 0xfbd28000-0xfbd28fff]****[ 1.153460] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]****[ 1.153505] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold****[ 1.153508] pci 0000:00:19.0: PME# disabled****[ 1.153530] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03****[ 1.153549] pci 0000:00:1a.0: reg 10: [mem 0xfbd27000-0xfbd273ff]****[ 1.153617] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold****[ 1.153621] pci 0000:00:1a.0: PME# disabled****[ 1.153641] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403****[ 1.153655] pci 0000:00:1b.0: reg 10: [mem 0xfbd20000-0xfbd23fff 64bit]****
[ 1.153704] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold****[ 1.153707] pci 0000:00:1b.0: PME# disabled****[ 1.153726] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604****[ 1.153784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold****[ 1.153787] pci 0000:00:1c.0: PME# disabled****[ 1.153807] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604****[ 1.153865] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold****[ 1.153869] pci 0000:00:1c.1: PME# disabled****[ 1.153889] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604****[ 1.153946] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold****[ 1.153950] pci 0000:00:1c.2: PME# disabled****[ 1.153970] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604****[ 1.154027] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold****[ 1.154031] pci 0000:00:1c.3: PME# disabled****[ 1.154051] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604****[ 1.154108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold****[ 1.154111] pci 0000:00:1c.4: PME# disabled****[ 1.154132] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604****[ 1.154189] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold****[ 1.154193] pci 0000:00:1c.6: PME# disabled****[ 1.154213] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604****[ 1.154270] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold****[ 1.154274] pci 0000:00:1c.7: PME# disabled****[ 1.154298] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03****[ 1.154318] pci 0000:00:1d.0: reg 10: [mem 0xfbd26000-0xfbd263ff]****[ 1.154385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold****[ 1.154389] pci 0000:00:1d.0: PME# disabled****[ 1.154412] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601****[ 1.154519] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106****[ 1.154535] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]****[ 1.154542] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]****[ 1.154549] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]****[ 1.154556] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]****[ 1.154563] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]****[ 1.154570] pci 0000:00:1f.2: reg 24: [mem 0xfbd25000-0xfbd257ff]****[ 1.154600] pci 0000:00:1f.2: PME# supported from D3hot****[ 1.154603] pci 0000:00:1f.2: PME# disabled****[ 1.154618] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05****[ 1.154631] pci 0000:00:1f.3: reg 10: [mem 0xfbd24000-0xfbd240ff 64bit]****
[ 1.154651] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]****[ 1.154687] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.154690] pci 0000:00:01.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154693] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154695] pci 0000:00:01.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154736] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.154740] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000](disabled)****
[ 1.154744] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.154750] pci 0000:00:1c.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.154816] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.154844] pci 0000:03:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]****
[ 1.154964] pci 0000:03:00.0: PME# supported from D3hot D3cold****[ 1.154970] pci 0000:03:00.0: PME# disabled****[ 1.159621] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.159625] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159629] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.159635] pci 0000:00:1c.1: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159676] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.159680] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000](disabled)****
[ 1.159684] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff] (disabled)****
[ 1.159690] pci 0000:00:1c.2: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.159750] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101****[ 1.159783] pci 0000:05:00.0: reg 10: [io 0xe040-0xe047]****[ 1.159799] pci 0000:05:00.0: reg 14: [io 0xe030-0xe033]****[ 1.159815] pci 0000:05:00.0: reg 18: [io 0xe020-0xe027]****[ 1.159830] pci 0000:05:00.0: reg 1c: [io 0xe010-0xe013]****[ 1.159846] pci 0000:05:00.0: reg 20: [io 0xe000-0xe00f]****[ 1.159861] pci 0000:05:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]****[ 1.159877] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]****
[ 1.159914] pci 0000:05:00.0: PME# supported from D3hot****[ 1.159919] pci 0000:05:00.0: PME# disabled****[ 1.167614] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.167618] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.167622] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.167627] pci 0000:00:1c.3: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.167695] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03****[ 1.167723] pci 0000:06:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]****
[ 1.167844] pci 0000:06:00.0: PME# supported from D3hot D3cold****[ 1.167850] pci 0000:06:00.0: PME# disabled****[ 1.175609] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.175615] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000](disabled)****
[ 1.175619] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.175625] pci 0000:00:1c.4: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175682] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604****[ 1.175785] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractivedecode)****
[ 1.175790] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.175794] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.175799] pci 0000:00:1c.6: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.175801] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.175802] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.175804] pci 0000:00:1c.6: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.175805] pci 0000:00:1c.6: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.175864] pci 0000:08:01.0: [10ec:8139] type 0 class 0x000200****[ 1.175895] pci 0000:08:01.0: reg 10: [io 0xd000-0xd0ff]****[ 1.175912] pci 0000:08:01.0: reg 14: [mem 0xfb901000-0xfb9010ff]****[ 1.176022] pci 0000:08:01.0: supports D1 D2****[ 1.176023] pci 0000:08:01.0: PME# supported from D1 D2 D3hot D3cold****
[ 1.176029] pci 0000:08:01.0: PME# disabled****[ 1.176058] pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00****[ 1.176089] pci 0000:08:02.0: reg 10: [mem 0xfb900000-0xfb9007ff]****[ 1.176106] pci 0000:08:02.0: reg 14: [io 0xd100-0xd17f]****[ 1.176218] pci 0000:08:02.0: supports D2****[ 1.176219] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold****[ 1.176225] pci 0000:08:02.0: PME# disabled****[ 1.176300] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractivedecode)****
[ 1.176311] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.176316] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.176326] pci 0000:07:00.0: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.176327] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff](subtractive decode)****
[ 1.176328] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff] (subtractive decode)****
[ 1.176330] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176331] pci 0000:07:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)****[ 1.176333] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7](subtractive decode)****
[ 1.176334] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff](subtractive decode)****
[ 1.176336] pci 0000:07:00.0: bridge window [mem0x000a0000-0x000bffff] (subtractive decode)****
[ 1.176337] pci 0000:07:00.0: bridge window [mem0xcfa00000-0xffffffff] (subtractive decode)****
[ 1.176408] pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106****[ 1.176425] pci 0000:09:00.0: reg 10: [io 0xc040-0xc047]****[ 1.176437] pci 0000:09:00.0: reg 14: [io 0xc030-0xc033]****[ 1.176450] pci 0000:09:00.0: reg 18: [io 0xc020-0xc027]****[ 1.176462] pci 0000:09:00.0: reg 1c: [io 0xc010-0xc013]****[ 1.176474] pci 0000:09:00.0: reg 20: [io 0xc000-0xc00f]****[ 1.176486] pci 0000:09:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]****[ 1.176499] pci 0000:09:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]****
[ 1.176533] pci 0000:09:00.0: PME# supported from D3hot****[ 1.176538] pci 0000:09:00.0: PME# disabled****[ 1.183602] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.183607] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.183611] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.183616] pci 0000:00:1c.7: bridge window [mem0xfff00000-0x000fffff pref] (disabled)****
[ 1.183652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]****[ 1.183726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]****
[ 1.183744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]****
[ 1.183759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]****
[ 1.183774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]****
[ 1.183788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]****
[ 1.183814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]****
[ 1.183829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]****
[ 1.183845] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX6.BR24._PRT]****
[ 1.183873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]****
[ 1.183948] pci0000:00: Requesting ACPI _OSC control (0x1d)****[ 1.184064] pci0000:00: ACPI _OSC control (0x1c) granted****[ 1.186647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 1214 15)****
[ 1.186678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 1214 15)****
[ 1.186707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 1415)****
[ 1.186735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 1415)****
[ 1.186762] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 1415)****
[ 1.186789] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 1214 15)****
[ 1.186817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 1214 15)****
[ 1.186845] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 1214 15)****
[ 1.186901] vgaarb: device added:PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none****
[ 1.186908] vgaarb: loaded****[ 1.186909] vgaarb: bridge control possible 0000:00:02.0****[ 1.187004] SCSI subsystem initialized****[ 1.187042] libata version 3.00 loaded.****[ 1.187066] usbcore: registered new interface driver usbfs****[ 1.187073] usbcore: registered new interface driver hub****[ 1.187088] usbcore: registered new device driver usb****[ 1.187132] PCI: Using ACPI for IRQ routing****[ 1.188450] PCI: pci_cache_line_size set to 64 bytes****[ 1.188541] reserve RAM buffer: 000000000009b400 - 000000000009ffff ****
[ 1.188543] reserve RAM buffer: 00000000be5cc000 - 00000000bfffffff ****
[ 1.188545] reserve RAM buffer: 00000000bedc9000 - 00000000bfffffff ****
[ 1.188547] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff ****
[ 1.188548] reserve RAM buffer: 000000022fe00000 - 000000022fffffff ****
[ 1.188604] NetLabel: Initializing****[ 1.188606] NetLabel: domain hash size = 128****[ 1.188607] NetLabel: protocols = UNLABELED CIPSOv4****[ 1.188614] NetLabel: unlabeled traffic allowed by default****[ 1.188641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0****[ 1.188646] hpet0: 8 comparators, 64-bit 14.318180 MHz counter****[ 1.190658] Switching to clocksource hpet****[ 1.191590] Switched to NOHz mode on CPU #0****[ 1.191647] Switched to NOHz mode on CPU #4****[ 1.191650] Switched to NOHz mode on CPU #7****[ 1.191652] Switched to NOHz mode on CPU #2****[ 1.191679] Switched to NOHz mode on CPU #1****[ 1.191682] Switched to NOHz mode on CPU #6****[ 1.191714] Switched to NOHz mode on CPU #5****[ 1.191717] Switched to NOHz mode on CPU #3****[ 1.193951] AppArmor: AppArmor Filesystem Enabled****[ 1.193965] pnp: PnP ACPI init****[ 1.193973] ACPI: bus type pnp registered****[ 1.194061] pnp 00:00: [bus 00-ff]****[ 1.194063] pnp 00:00: [io 0x0cf8-0x0cff]****[ 1.194064] pnp 00:00: [io 0x0000-0x0cf7 window]****[ 1.194065] pnp 00:00: [io 0x0d00-0xffff window]****[ 1.194066] pnp 00:00: [mem 0x000a0000-0x000bffff window]****[ 1.194068] pnp 00:00: [mem 0x000c8000-0x000dffff window]****[ 1.194069] pnp 00:00: [mem 0xcfa00000-0xffffffff window]****[ 1.194070] pnp 00:00: [mem 0x00000000 window]****[ 1.194109] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03(active)****
[ 1.194141] pnp 00:01: [mem 0xfed10000-0xfed19fff]****[ 1.194142] pnp 00:01: [mem 0xe0000000-0xe3ffffff]****[ 1.194143] pnp 00:01: [mem 0xfed90000-0xfed93fff]****[ 1.194144] pnp 00:01: [mem 0xfed20000-0xfed3ffff]****[ 1.194145] pnp 00:01: [mem 0xfee00000-0xfee0ffff]****[ 1.194170] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved****
[ 1.194173] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved****
[ 1.194176] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved****
[ 1.194178] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved****
[ 1.194181] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved****
[ 1.194184] system 00:01: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194220] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194221] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194222] pnp 00:02: [io 0x0290-0x029f]****[ 1.194223] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194244] system 00:02: [io 0x0290-0x029f] has been reserved****[ 1.194247] system 00:02: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194254] pnp 00:03: [dma 4]****[ 1.194255] pnp 00:03: [io 0x0000-0x000f]****[ 1.194256] pnp 00:03: [io 0x0081-0x0083]****[ 1.194257] pnp 00:03: [io 0x0087]****[ 1.194258] pnp 00:03: [io 0x0089-0x008b]****[ 1.194259] pnp 00:03: [io 0x008f]****[ 1.194260] pnp 00:03: [io 0x00c0-0x00df]****[ 1.194273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)****
[ 1.194278] pnp 00:04: [io 0x0070-0x0071]****[ 1.194286] pnp 00:04: [irq 8]****[ 1.194298] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)****
[ 1.194302] pnp 00:05: [io 0x0061]****[ 1.194314] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)****
[ 1.194323] pnp 00:06: [io 0x0010-0x001f]****[ 1.194324] pnp 00:06: [io 0x0022-0x003f]****[ 1.194325] pnp 00:06: [io 0x0044-0x005f]****[ 1.194326] pnp 00:06: [io 0x0063]****[ 1.194327] pnp 00:06: [io 0x0065]****[ 1.194328] pnp 00:06: [io 0x0067-0x006f]****[ 1.194328] pnp 00:06: [io 0x0072-0x007f]****[ 1.194329] pnp 00:06: [io 0x0080]****[ 1.194331] pnp 00:06: [io 0x0084-0x0086]****[ 1.194332] pnp 00:06: [io 0x0088]****[ 1.194333] pnp 00:06: [io 0x008c-0x008e]****[ 1.194334] pnp 00:06: [io 0x0090-0x009f]****[ 1.194335] pnp 00:06: [io 0x00a2-0x00bf]****[ 1.194336] pnp 00:06: [io 0x00e0-0x00ef]****[ 1.194337] pnp 00:06: [io 0x04d0-0x04d1]****[ 1.194362] system 00:06: [io 0x04d0-0x04d1] has been reserved****[ 1.194365] system 00:06: Plug and Play ACPI device, IDs PNP0c02(active)****
[ 1.194369] pnp 00:07: [io 0x00f0-0x00ff]****[ 1.194373] pnp 00:07: [irq 13]****[ 1.194384] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)****
[ 1.194544] pnp 00:08: [io 0x0400-0x0453]****[ 1.194545] pnp 00:08: [io 0x0458-0x047f]****[ 1.194546] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]****[ 1.194547] pnp 00:08: [io 0x0500-0x057f]****[ 1.194548] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]****[ 1.194549] pnp 00:08: [mem 0xfec00000-0xfecfffff]****[ 1.194550] pnp 00:08: [mem 0xfed08000-0xfed08fff]****[ 1.194552] pnp 00:08: [mem 0xff000000-0xffffffff]****[ 1.194575] system 00:08: [io 0x0400-0x0453] has been reserved****[ 1.194577] system 00:08: [io 0x0458-0x047f] has been reserved****[ 1.194580] system 00:08: [io 0x0500-0x057f] has been reserved****[ 1.194582] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved****
[ 1.194585] system 00:08: [mem 0xfec00000-0xfecfffff] could not bereserved****
[ 1.194587] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved****
[ 1.194590] system 00:08: [mem 0xff000000-0xffffffff] has been reserved****
[ 1.194593] system 00:08: Plug and Play ACPI device, IDs PNP0c01(active)****
[ 1.194612] pnp 00:09: [io 0x0454-0x0457]****[ 1.194633] system 00:09: [io 0x0454-0x0457] has been reserved****[ 1.194636] system 00:09: Plug and Play ACPI device, IDs INT3f0dPNP0c02 (active)****
[ 1.194707] pnp 00:0a: [mem 0xfed00000-0xfed003ff]****[ 1.194749] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)****
[ 1.194840] pnp: PnP ACPI: found 11 devices****[ 1.194842] ACPI: ACPI bus type pnp unregistered****[ 1.200033] PCI: max bus depth: 2 pci_try_num: 3****[ 1.200099] pci 0000:00:1c.3: BAR 15: assigned [mem0xcfa00000-0xcfafffff pref]****
[ 1.200102] pci 0000:00:01.0: PCI bridge to [bus 01-01]****[ 1.200104] pci 0000:00:01.0: bridge window [io disabled]****[ 1.200107] pci 0000:00:01.0: bridge window [mem disabled]****[ 1.200110] pci 0000:00:01.0: bridge window [mem pref disabled]****[ 1.200113] pci 0000:00:1c.0: PCI bridge to [bus 02-02]****[ 1.200115] pci 0000:00:1c.0: bridge window [io disabled]****[ 1.200120] pci 0000:00:1c.0: bridge window [mem disabled]****[ 1.200124] pci 0000:00:1c.0: bridge window [mem pref disabled]****[ 1.200131] pci 0000:00:1c.1: PCI bridge to [bus 03-03]****[ 1.200133] pci 0000:00:1c.1: bridge window [io disabled]****[ 1.200138] pci 0000:00:1c.1: bridge window [mem0xfbc00000-0xfbcfffff]****
[ 1.200143] pci 0000:00:1c.1: bridge window [mem pref disabled]****[ 1.200149] pci 0000:00:1c.2: PCI bridge to [bus 04-04]****[ 1.200151] pci 0000:00:1c.2: bridge window [io disabled]****[ 1.200156] pci 0000:00:1c.2: bridge window [mem disabled]****[ 1.200160] pci 0000:00:1c.2: bridge window [mem pref disabled]****[ 1.200167] pci 0000:05:00.0: BAR 6: assigned [mem0xcfa00000-0xcfa0ffff pref]****
[ 1.200170] pci 0000:00:1c.3: PCI bridge to [bus 05-05]****[ 1.200173] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]****[ 1.200179] pci 0000:00:1c.3: bridge window [mem0xfbb00000-0xfbbfffff]****
[ 1.200184] pci 0000:00:1c.3: bridge window [mem0xcfa00000-0xcfafffff pref]****
[ 1.200190] pci 0000:00:1c.4: PCI bridge to [bus 06-06]****[ 1.200192] pci 0000:00:1c.4: bridge window [io disabled]****[ 1.200198] pci 0000:00:1c.4: bridge window [mem0xfba00000-0xfbafffff]****
[ 1.200202] pci 0000:00:1c.4: bridge window [mem pref disabled]****[ 1.200208] pci 0000:07:00.0: PCI bridge to [bus 08-08]****[ 1.200213] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]****[ 1.200221] pci 0000:07:00.0: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200227] pci 0000:07:00.0: bridge window [mem pref disabled]****[ 1.200238] pci 0000:00:1c.6: PCI bridge to [bus 07-08]****[ 1.200241] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]****[ 1.200246] pci 0000:00:1c.6: bridge window [mem0xfb900000-0xfb9fffff]****
[ 1.200251] pci 0000:00:1c.6: bridge window [mem pref disabled]****[ 1.200258] pci 0000:00:1c.7: PCI bridge to [bus 09-09]****[ 1.200261] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]****[ 1.200266] pci 0000:00:1c.7: bridge window [mem0xfb800000-0xfb8fffff]****
[ 1.200271] pci 0000:00:1c.7: bridge window [mem pref disabled]****[ 1.200284] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16****
[ 1.200288] pci 0000:00:01.0: setting latency timer to 64****[ 1.200295] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17****
[ 1.200299] pci 0000:00:1c.0: setting latency timer to 64****[ 1.200305] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16****
[ 1.200309] pci 0000:00:1c.1: setting latency timer to 64****[ 1.200317] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 185,368 lines not shown · raw message
Quoted 10 lines
6 lines not shown · raw message
Quoted 4 lines
4 lines not shown · raw message
Quoted 4 lines
4 lines not shown · raw message
Quoted 4 lines
4 lines not shown · raw message
4 lines not shown · raw message
Part of this message is not shown here. View the raw message.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 12 lines · Angela Schmid
Hello
Thanks for helping. I added the dmesg with drm.debug=0x0e below.
I tried last month with get-edid in DOS, with the same unhappy result, see below for actual linux.Quoted 2 lines
Could you try with the following two patches which just came to this list this week?
http://comments.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/8006I have this version from xorg-edgers
xserver-xorg-video-intel/oneiric uptodate 2:2.17.0+git20120115.8652bf7a-0ubuntu0sarvatt~oneiric Is it included ?
Quoted 6 lines
I cannot find the repository to look for the log:
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/
Is this link correct ? where is src/drivers ?http://intellinuxgraphics.org/download.html
Need to look for "1) X.org 2D driver", correct ?
dmesg indicates the same issue (not suprising given that it's the same TV).
You need to compile a new kernel, the output handling part of the graphics driver is there. Best is to try the latest drm-intel-fixes tree available at:
https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=shortlog;h=refs/heads/drm-intel-fixes
Yours, Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 12 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
Quoted 9 lines
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
Could you try with the following two patches which just came to this list this week?
http://comments.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/8006
Don't know if they will fix the problem, but they could help perhaps.
Signature · 2 lines
Eugeni Dodonov <http://eugeni.dodonov.net/>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 21 lines · Eugeni Dodonov
Quoted 19 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
Quoted 10 lines
Quoted 2 lines
I'd love to know if you get the same error.
Could you try with the following two patches which just came to this list this week?
http://comments.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/8006Don't know if they will fix the problem, but they could help perhaps.
Hi Eugeni,
and thank you.
I'm just an end-user. I have the willingness to try, but I need a bit more guidance... I've never compiled X. If you can point me to some page that explains the process I'll be more than happy to try.
cheers,
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): 20120118135526.GA16113@9ba4542ee290bef7a68a5eff03328b0e
A message that is not in the archive (sent off-list or not yet received): CAO=xpBFUpu7vRL+1-1=vd9wDgm25+3Fk-iZSZGNe5L-SZY5gMQ@mail.gmail.com
Hello Alfonso
The patches are not yet merged
I also don't see them at the repository I received from Daniel
https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=history;f=drivers/gpu/drm/i915
When will the patches be commited or merged ?
Angela
From: Alfonso Fiore [mailto:[email protected]]
Sent: 18 January 2012 15:28
To: Peter Ross
Cc: Angela Schmid
Subject: Re: [Intel-gfx] Sandy Bridge Desktop - 1920x1080i interlace not working
Hi Peter!
Thank you, fantastic news! :)
Quoted 3 lines
Version 2 of the patch set will work on a broader range of chipsets including Sandy Bridge. I have just posted this to the list. It is also available here:
<http://lists.freedesktop.org/archives/intel-gfx/2012-January/014504.html>
thank you!
Quoted 3 lines
To test you will need to recompile your kernel. In my case there was no need to recompile Xorg, as the problem is confined to the kernel drm driver. If you are running Debian or Ubuntu I can walk you through it.
I absolutely accept your help. Thank you!
As far as I understand I need to compile kernel from git.
I use Ubuntu Oneiric 11.10.
I found this article. Maybe you can have a look and tell me if these are the right steps to follow:
https://wiki.ubuntu.com/KernelTeam/GitKernelBuild
Basically what I don't know is at which step and how apply your patch.
Just to confirm with you, I run Xorg 1.10.4 (xorg-edgers crashes after a few mins for me).
I will have time to try tomorrow evening and over the weekend.
Awesome! :)
regards,
alfonso
On Wed, Jan 18, 2012 at 2:55 PM, Peter Ross <[email protected]> wrote:
Quoted 9 lines · Alfonso Fiore
Quoted 7 lines · Eugeni Dodonov
Quoted 5 lines · Alfonso Fiore
Hi Angela,
I have a very similar problem!
Hi Angela and Alfonso,
You may be in luck. I encountered the same interlace problem last weekend with my 1080i television and G35 chipset, and wrote a patch. While my chipset is not a Sandy Bridge chipset, they apparently share the same interlace logic.
Quoted 17 lines
Quoted 17 lines
Quoted 16 lines
I have Sandy Bridge (i3 2130) and a Philips 32pf9731d (coincidence?). With my previous i3 550 I didn't have any problem.
I tried all possible resolutions over HDMI and all the time the screen is split in two (twice the top half) and flickering. I also can't manage to use VGA (TV has VGA input).
I also tried with the latest kernel and latest X.
Can you try to run this tool? http://polypux.org/projects/read-edid/
I'm absolutely not an expert, but the output I get (Your EDID is probably invalid.) is not encouraging.
I'd love to know if you get the same error.
Quoted 6 lines
Quoted 6 lines
Could you try with the following two patches which just came to this list this week?
http://comments.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/8006Don't know if they will fix the problem, but they could help perhaps.
Nb: The initial version of the patch set (given above) enables interlacing only on generation 4 chipsets, such as G35 and Q45.
Version 2 of the patch set will work on a broader range of chipsets including Sandy Bridge. I have just posted this to the list. It is also available here:
<http://lists.freedesktop.org/archives/intel-gfx/2012-January/014504.html>
Quoted 3 lines
I'm just an end-user. I have the willingness to try, but I need a bit more guidance... I've never compiled X. If you can point me to some page that explains the process I'll be more than happy to try.
To test you will need to recompile your kernel. In my case there was no need to recompile Xorg, as the problem is confined to the kernel drm driver. If you are running Debian or Ubuntu I can walk you through it.
-- Peter
(A907 E02F A6E5 0CD2 34CD 20D2 6760 79C5 AC40 DD6B)
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Angela Schmid
Hello Alfonso
The patches are not yet merged
Quoted 7 lines
I also don't see them at the repository I received from Daniel
https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=history;f=drivers/gpu/drm/i915
When will the patches be commited or merged ?
As soon as I'm satisfied with the review and testing they've gotten. Atm testing is still missing, if you can try them that would be awesome. You also need one of the above kernels for the CEA stuff, so can you pick up the 3 patches from Peter and apply them on top?
If it's too much fuss I could smash everything you need into a git tree somewhere for you to try out.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 19 lines · Daniel Vetter
Quoted 10 lines · Angela Schmid
Hello Alfonso
The patches are not yet merged
Quoted 7 lines
I also don't see them at the repository I received from Daniel
https://git.kernel.org/?p=linux/kernel/git/keithp/linux.git;a=history;f=drivers/gpu/drm/i915
When will the patches be commited or merged ?
Quoted 7 lines
As soon as I'm satisfied with the review and testing they've gotten. Atm testing is still missing, if you can try them that would be awesome. You also need one of the above kernels for the CEA stuff, so can you pick up the 3 patches from Peter and apply them on top?
If it's too much fuss I could smash everything you need into a git tree somewhere for you to try out.
I'll try either tomorrow evening or during the weekend. I got some instructions from Peter off the list that should help me.
I'll cry for help in case I'm stuck.
thanks,
alfonso
Quoted 5 lines
-Daniel
--
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48