Linux 2.4.2 DMA Interrupt poblem?
Hi,
I have a linux raid 5 running with primise ultra dma ata/100 cards running IBM ata/100 drives with the proper cables. A lot of people have been submitting reports that have the similar error in the syslog. I myself have two identical systems running that are giving a lot of errors, this one however seems to be unique. Since these drives are brand new, I dont think that could cause a failure. Maybe somebody with a little more knowledge could comment on this? The drive was rough backonline and it seems to be functioning properly.
Jasmeet
<-- syslog -->
Feb 24 14:00:52 bertha kernel: hdi: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Feb 24 14:00:52 bertha kernel: hdi: dma_intr: error=0x40 { UncorrectableError }, LBAsect=42484802, sector=42484720
Feb 24 14:00:52 bertha kernel: end_request: I/O error, dev 38:01 (hdi), sector 42484720
Feb 24 14:00:52 bertha kernel: raid5: Disk failure on hdi1, disabling device. Operation continuing on 7 devices
Feb 24 14:00:52 bertha kernel: md: recovery thread got woken up ...
Feb 24 14:00:52 bertha kernel: md0: resyncing spare disk hdc1 to replace failed disk
Feb 24 14:00:52 bertha kernel: RAID5 conf printout:
Feb 24 14:00:52 bertha kernel: --- rd:8 wd:7 fd:1
Feb 24 14:00:52 bertha kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1
Feb 24 14:00:52 bertha kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1
Feb 24 14:00:52 bertha kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:hdi1
Feb 24 14:00:52 bertha kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdk1
Feb 24 14:00:52 bertha kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdm1
Feb 24 14:00:52 bertha kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdo1
Feb 24 14:00:52 bertha kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdq1
Feb 24 14:00:52 bertha kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hds1
Feb 24 14:00:52 bertha kernel: RAID5 conf printout:
Feb 24 14:00:52 bertha kernel: --- rd:8 wd:7 fd:1
Feb 24 14:00:52 bertha kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1
Feb 24 14:00:52 bertha kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1
Feb 24 14:00:52 bertha kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:hdi1
Feb 24 14:00:52 bertha kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdk1
Feb 24 14:00:52 bertha kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdm1
Feb 24 14:00:52 bertha kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdo1
Feb 24 14:00:52 bertha kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdq1
Feb 24 14:00:52 bertha kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hds1
Feb 24 14:00:52 bertha kernel: md: syncing RAID array md0
Feb 24 14:00:52 bertha kernel: md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
Feb 24 14:00:52 bertha kernel: md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction.
Feb 24 14:00:52 bertha kernel: md: using 124k window, over a total of 75068160 blocks.
Feb 24 14:00:52 bertha kernel: md: updating md0 RAID superblock on device
Feb 24 14:00:52 bertha kernel: hds1 [events: 00000016](write) hds1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hdq1 [events: 00000016](write) hdq1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hdo1 [events: 00000016](write) hdo1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hdm1 [events: 00000016](write) hdm1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hdk1 [events: 00000016](write) hdk1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: (skipping faulty hdi1 )
Feb 24 14:00:52 bertha kernel: hdg1 [events: 00000016](write) hdg1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hde1 [events: 00000016](write) hde1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: hdc1 [events: 00000016](write) hdc1's sb offset: 75068160
Feb 24 14:00:52 bertha kernel: .
Feb 24 16:50:32 bertha kernel: md: md0: sync done.
Feb 24 16:50:32 bertha kernel: RAID5 conf printout:
Feb 24 16:50:32 bertha kernel: --- rd:8 wd:7 fd:1
Feb 24 16:50:32 bertha kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1
Feb 24 16:50:32 bertha kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1
Feb 24 16:50:32 bertha kernel: disk 2, s:0, o:0, n:2 rd:2 us:1 dev:hdi1
Feb 24 16:50:32 bertha kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdk1
Feb 24 16:50:32 bertha kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdm1
Feb 24 16:50:32 bertha kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdo1
Feb 24 16:50:32 bertha kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdq1
Feb 24 16:50:32 bertha kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hds1
Feb 24 16:50:32 bertha kernel: RAID5 conf printout:
Feb 24 16:50:32 bertha kernel: --- rd:8 wd:8 fd:0
Feb 24 16:50:32 bertha kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1
Feb 24 16:50:32 bertha kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdg1
Feb 24 16:50:32 bertha kernel: disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdc1
Feb 24 16:50:32 bertha kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdk1
Feb 24 16:50:32 bertha kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:hdm1
Feb 24 16:50:32 bertha kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:hdo1
Feb 24 16:50:32 bertha kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:hdq1
Feb 24 16:50:32 bertha kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:hds1
Feb 24 16:50:32 bertha kernel: md: updating md0 RAID superblock on deviceQuoted 4 lines
Feb 24 14:00:52 bertha kernel: hdi: dma_intr: status=0x51 { DriveReady SeekComplete Error } Feb 24 14:00:52 bertha kernel: hdi: dma_intr: error=0x40 {UncorrectableError }, LBAsect=42484802, sector=42484720
Uncorrectable generally implies a hardware failure such as a bad block on the disk