Skip to contentSkip to conversation

video: ld9040: support early fb event of fb_blank()

PATCH New Donghwa Lee 1 participant 1 message Jul 19, 2012 1 message not in the archive

Subsystems (2)
Framebuffer layer Backlight class/subsystem
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Donghwa Lee

author
#1 lore raw

PATCH 1/1 video: ld9040: support early fb event of fb_blank()

This patch supports early fb event of fb_blank().

- In case of lcd power off : call early_set_power() interface and lcd power is off. And then framebuffer is blanked.

- In case of lcd power on : First, framebuffer is unblanked, and then call set_power() interface to turn lcd on.

Signed-off-by Donghwa Lee <[email protected]>
Signed-off-by Inki Dae <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
---
 drivers/video/backlight/ld9040.c |   36 +++++++++++++++++++++++++++++++++++-
 1 files changed, 35 insertions(+), 1 deletions(-)
drivers/video/backlight/ld9040.c +35 -1
index efd352b..221c843 100644
@@ -642,17 +642,50 @@ static int ld9040_power(struct ld9040 *lcd, int power)
 	return ret;
 }
 
+static int ld9040_early_set_power(struct lcd_device *ld, int power)
+{
+	struct ld9040 *lcd = lcd_get_data(ld);
+	int ret = 0;
+
+	if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+		power != FB_BLANK_NORMAL) {
+		dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+
+		return -EINVAL;
+	}
+
+	if (!power_is_on(power) && power_is_on(lcd->power)) {
+		ret = ld9040_power(lcd, power);
+		if (!ret)
+			lcd->power = power;
+	}
+
+	return ret;
+}
+
 static int ld9040_set_power(struct lcd_device *ld, int power)
 {
 	struct ld9040 *lcd = lcd_get_data(ld);
+	struct backlight_device *bd = lcd->bd;
+	int ret = 0;
 
 	if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
 		power != FB_BLANK_NORMAL) {
 		dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+
 		return -EINVAL;
 	}
 
-	return ld9040_power(lcd, power);
+	if (power_is_on(power) && !power_is_on(lcd->power)) {
+		ret = ld9040_power(lcd, power);
+		if (!ret)
+			lcd->power = power;
+
+		ld9040_gamma_ctl(lcd, bd->props.brightness);
+	} else
+		ld9040_early_set_power(ld, power);
+
+	return ret;
 }
 
 static int ld9040_get_power(struct lcd_device *ld)

@@ -689,6 +722,7 @@ static int ld9040_set_brightness(struct backlight_device *bd)
 }
 
 static struct lcd_ops ld9040_lcd_ops = {
+	.early_set_power = ld9040_early_set_power,
 	.set_power = ld9040_set_power,
 	.get_power = ld9040_get_power,
 };
Signature · 1 line
1.7.4.1