Skip to contentSkip to conversation

anyone know of a bug which causes dev->qdisc to be noop_qdisc for a working interface?

DISCUSSION Chris Friesen 1 participant 1 message Jul 26, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi all,

I've been asked to help debug an issue we've had in the field where after a month or so of uptime for a server the router it was connected to was rebooted and one of the eth links stopped transmitting packets. Downing and upping the link doesn't fix it. An ethtool offline selftest doesn't fix it. Only known fix is a reboot of the server.

The server is running 2.6.14, which makes things interesting.

Luckily we had kprobes enabled and I tracked down the source code, and I've been able to isolate the source of the problem. It seems that for the problematic eth device (which is up and is receiving packets) dev->qdisc is set to noop_qdisc, which ends up silently dropping all outgoing packets on the floor. dev->qdisc_sleeping is pfifo_fast as expected.

Does anyone have any ideas how this might have happened? Does anyone remember a bug in this area from that long ago?

Thanks,
Chris

Signature · 6 lines
Chris Friesen
Software Designer

3500 Carling Avenue
Ottawa, Ontario K2H 8E9
www.genband.com