I2C dummy, regmap, irq domain issue

I have an interesting issue with the combination of i2c dummy devices, regmap-irq and domains.

I have been adding device tree support to the palmas mfd driver.

The palmas device has 3 i2c addresses it responds to so it has one normal i2c device and 2 dummy devices to claim the 2nd/3rd addresses (this is pretty normal).

The registers for the IRQ handling on the chip happen to be in the 2nd slave address. This means that when I am calling the regmap_add_irq_chip call it is using a regmap based on the dummy i2c device.

regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip, &palmas->irq_data);

This works however when probing the child devices from the device tree because I have used a dummy I2C device it fails to find the IRQ domain created by regmap-irq.

of_platform_populate(node, NULL, NULL, &i2c->dev);

While debugging this issue I changed the regmap_add_irq_chip as per the diff at end of the email. Is there a cleaner way to solve this within the DT system?

Graeme

@@ -194,7 +194,7 @@ static struct irq_domain_ops regmap_domain_ops = {
* register cache. The chip driver is responsible for restoring the
* register values used by the IRQ controller over suspend and resume. */
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, +int regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, int irq_flags,
int irq_base, struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data)
{
@@ -269,11 +269,11 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,

     }
 
     if (irq_base)
-        d->domain = irq_domain_add_legacy(map->dev->of_node,
+        d->domain = irq_domain_add_legacy(dev->of_node,
                           chip->num_irqs, irq_base, 0,
                           &regmap_domain_ops, d);
     else
-        d->domain = irq_domain_add_linear(map->dev->of_node,
+        d->domain = irq_domain_add_linear(dev->of_node,
                           chip->num_irqs,
                           &regmap_domain_ops, d);
     if (!d->domain) {