Skip to contentSkip to conversation

Qemu refusing to build

DISCUSSION Jack Mitchell 2 participants 5 messages Aug 2, 2012

lore
Share & tools
lore

Jack Mitchell

author
#0 lore raw

I am having an issue trying to build qemu for the qemuarm machine. It's just a standard core-image-minimal with a vanilla copy of poky master. The error log is as follows:

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062
---------------------------------------------------------------------------
DEBUG: Executing python function sysroot_cleansstate
DEBUG: Python function sysroot_cleansstate finished
DEBUG: Executing shell function do_configure /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/run.do_configure.1062:
line 86:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1/configure:
No such file or directory
ERROR: Function failed: do_configure (see /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062 for further information)

That is all I get, and the build just fails. I'm not sure where to even start debugging this...

Regards,

Signature · 5 lines
  Jack Mitchell ([email protected])
  Embedded Systems Engineer
  http://www.embed.me.uk

--
#1 lore raw
Quoted 18 lines · Jack Mitchell

I am having an issue trying to build qemu for the qemuarm machine. It's just a standard core-image-minimal with a vanilla copy of poky master. The error log is as follows:

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062
---------------------------------------------------------------------------
DEBUG: Executing python function sysroot_cleansstate
DEBUG: Python function sysroot_cleansstate finished
DEBUG: Executing shell function do_configure /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/run.do_configure.1062:
line 86:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1/configure:
No such file or directory
ERROR: Function failed: do_configure (see /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062 for further information)

Quoted 2 lines

That is all I get, and the build just fails. I'm not sure where to even start debugging this...

Does the file:

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1/configure

exist? Can you execute it? Does
running /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/run.do_configure.1062 give the same error? You can try and pin this down to a specific command failing, it could be something in the configure script itself that is erroring, its hard to tell from just the above.

Cheers,

Richard

author
#2 lore raw
Quoted 19 lines · Richard Purdie
Quoted 18 lines · Jack Mitchell

I am having an issue trying to build qemu for the qemuarm machine. It's just a standard core-image-minimal with a vanilla copy of poky master. The error log is as follows:

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062
---------------------------------------------------------------------------
DEBUG: Executing python function sysroot_cleansstate
DEBUG: Python function sysroot_cleansstate finished
DEBUG: Executing shell function do_configure /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/run.do_configure.1062:
line 86:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1/configure:
No such file or directory
ERROR: Function failed: do_configure (see /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/log.do_configure.1062 for further information)

Quoted 8 lines
Quoted 2 lines

That is all I get, and the build just fails. I'm not sure where to even start debugging this...

Does the file:

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1/configure

exist?

Does not exist.

Quoted 1 line

Can you execute it?

No

Quoted 2 lines

Does
running /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/temp/run.do_configure.1062 give the same error?

Exactly the same error.

Quoted 1 line

You can try and pin this down to a specific command failing, it could be something in the configure script itself that is erroring, its hard to tell from just the above.

How would I manually attempt to configure? There are no files what so ever in the /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1 directory.

Quoted 8 lines

Cheers,

Richard

Regards,

Signature · 5 lines
  Jack Mitchell ([email protected])
  Embedded Systems Engineer
  http://www.embed.me.uk

--
#3 lore raw
Quoted 4 lines · Jack Mitchell

How would I manually attempt to configure? There are no files what so
ever in the /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1 directory.

Well, that is a big help to know. It sounds like something has wiped the work directory and its then trying to rebuild it. Are you using rm_work of some kind? It sounds like some kind of malfunction has occurred with it...

Cheers,

Richard.

author
#4 lore raw
Quoted 6 lines · Richard Purdie
Quoted 4 lines · Jack Mitchell

How would I manually attempt to configure? There are no files what so
ever in the /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r10/qemu-0.15.1 directory.

Quoted 9 lines

Well, that is a big help to know. It sounds like something has wiped the work directory and its then trying to rebuild it. Are you using rm_work of some kind? It sounds like some kind of malfunction has occurred with it...

Cheers,

Richard.

It could very well be related to the fact that I am building over NFS and the other problems that have come with it. I'm building with the bog standard vanilla poky with quemu arm uncommented. In this situation I would normally -c cleansstate and try again, but that function is also broken for me (again possibly NFS related).

I changed my NFS mount settings to force sync which makes it act like a more traditional hard drive but it doesn't seem to have done me any good.

I'm not back in work till Monday so I'll see if I can do anything more with it then. If anyone could confirm that they build on an NFS mount then that would be a massive help.

Cheers,