Make the "which C state line" logic better
Arjan van de Ven
PATCH 2/4 Make the "which C state line" logic better
Quoted 1 line
From
2e88a61859db0592707d1a0a35e33408a0327951Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan(a)linux.intel.com>
Date: Sun, 5 Aug 2012 09:57:49 -0700
Subject: [PATCH 2/4] Make the "which C state line" logic better
the ARM guys complained that their human-readable C state names didn't have numbers in them, and that as a result, the output is all messed up. Using the "linux_name" instead is only a partial solution; it messes up the x86 side of the logic.
This patch fixes the logic to make the code use the human readable logic first, but if there's no numbers there, fall back to the Linux name.
In addition, the patch allows callers to specify the line directly, overriding both sets of logic.
--- src/cpu/abstract_cpu.cpp | 21 ++++++++++++++++++--- src/cpu/cpu.h | 4 ++-- 2 files changed, 20 insertions(+), 5 deletions(-)
src/cpu/abstract_cpu.cpp +18 -3
@@ -130,7 +130,7 @@ void abstract_cpu::measurement_end(void) } } -void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count) +void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level) { struct idle_state *state; const char *c;
@@ -147,6 +147,8 @@ void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, strcpy(state->linux_name, linux_name); strcpy(state->human_name, human_name); + state->line_level = -1; + c = human_name; while (*c) { if (strcmp(linux_name, "active")==0) {
@@ -160,6 +162,19 @@ void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, c++; } + /* some architectures (ARM) don't have good numbers in thier human name.. fall back to the linux name for those */ + c = linux_name; + while (*c && state->line_level < 0) { + if (*c >= '0' && *c <='9') { + state->line_level = strtoull(c, NULL, 10); + break; + } + c++; + } + + if (level >= 0) + state->line_level = level; + state->usage_before = usage; state->duration_before = duration; state->before_count = count;
@@ -187,7 +202,7 @@ void abstract_cpu::finalize_cstate(const char *linux_name, uint64_t usage, uint6 state->after_count += count; } -void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count) +void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level) { unsigned int i; struct idle_state *state = NULL;
@@ -200,7 +215,7 @@ void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, } if (!state) { - insert_cstate(linux_name, human_name, usage, duration, count); + insert_cstate(linux_name, human_name, usage, duration, count, level); return; }
src/cpu/cpu.h +2 -2
@@ -111,8 +111,8 @@ public:/* C state related methods */ -void insert_cstate (const char *linux_name,const char *human_name,uint64_t usage,uint64_t duration,int count); -void update_cstate (const char *linux_name,const char *human_name,uint64_t usage,uint64_t duration,int count); + void insert_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level = -1); + void update_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level = -1);void finalize_cstate (const char *linux_name,uint64_t usage,uint64_t duration,int count); virtual int has_cstate_level(int level);
Signature · 1 line
1.7.7.6
Rajagopal Venkat
Quoted 5 lines · Arjan van de Ven
From
2e88a61859db0592707d1a0a35e33408a0327951Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan(a)linux.intel.com>
Date: Sun, 5 Aug 2012 09:57:49 -0700
Subject: [PATCH 2/4] Make the "which C state line" logic better
Quoted 7 lines
the ARM guys complained that their human-readable C state names didn't have numbers in them, and that as a result, the output is all messed up. Using the "
linux_name" instead is only a partial solution; it messes up the x86
side of the logic.
I fail to understand how using "linux_name" for parsing C states would mess up
x86 logic. Each supported C state will have corresponding 'stateX' directory (linux_name) which contain numbers in them. Also there are few hard coded states in intel_cpus.cpp file, in which linux_name contains numbers in them as well. In both the cases linux_name contains numbers and hence safe to parse. Please let me know if I am missing something here.
Thanks.
Quoted 107 lines
This patch fixes the logic to make the code use the human readable logic first,
but if there's no numbers there, fall back to the Linux name.In addition, the patch allows callers to specify the line directly, overriding
both sets of logic.--- src/cpu/abstract_cpu.cpp | 21 ++++++++++++++++++--- src/cpu/cpu.h | 4 ++-- 2 files changed, 20 insertions(+), 5 deletions(-)src/cpu/abstract_cpu.cpp +1
-1@@ -130,7 +130,7 @@ void abstract_cpu::measurement_end(void) } } -void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count) +void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level) {struct idle_state *state; const char *c;src/cpu/abstract_cpu.cpp +2
-0@@ -147,6 +147,8 @@ void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, strcpy(state->linux_name, linux_name); strcpy(state->human_name, human_name); + state->line_level = -1; + c = human_name; while (*c) {if (strcmp(linux_name, "active")==0) {src/cpu/abstract_cpu.cpp +1
-0@@ -160,6 +162,19 @@ void abstract_cpu::insert_cstate(const char *linux_name, const char *human_name, c++; } + /* some architectures (ARM) don't have good numbers in thier humanname.. fall back to the linux name for those */
src/cpu/abstract_cpu.cpp +13
-1+ c = linux_name; + while (*c && state->line_level < 0) { + if (*c >= '0' && *c <='9') { + state->line_level = strtoull(c, NULL, 10); + break; + } + c++; + } + + if (level >= 0) + state->line_level = level; + state->usage_before = usage; state->duration_before = duration; state->before_count = count;@@ -187,7 +202,7 @@ void abstract_cpu::finalize_cstate(const char *linux_name, uint64_t usage, uint6 state->after_count += count; } -void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count) +void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, uint64_t usage, uint64_t duration, int count, int level){ unsigned int i; struct idle_state *state = NULL;src/cpu/abstract_cpu.cpp +1
-1@@ -200,7 +215,7 @@ void abstract_cpu::update_cstate(const char *linux_name, const char *human_name, } if (!state) { - insert_cstate(linux_name, human_name, usage, duration, count); + insert_cstate(linux_name, human_name, usage, duration, count, level);return; }src/cpu/cpu.h +2
-2@@ -111,8 +111,8 @@ public:/* C state related methods */ -void insert_cstate (const char *linux_name,const char *human_name, uint64_t usage, uint64_t duration, int count); -void update_cstate (const char *linux_name,const char *human_name, uint64_t usage, uint64_t duration, int count); +void insert_cstate (const char *linux_name,const char *human_name, uint64_t usage, uint64_t duration, int count, int level = -1); + void update_cstate(const char *linux_name, const char
*human_name,uint64_tusage,uint64_tduration, int count, int level = -1);
void finalize_cstate(const char*linux_name,uint64_t
usage,uint64_tduration, int count);virtual int has_cstate_level(int level);--
1.7.7.6
Signature · 2 lines
Regards, Rajagopal
Arjan van de Ven
Quoted 14 lines · Rajagopal Venkat
On 5 August 2012 22:43, Arjan van de Ven <arjan(a)linux.intel.com <mailto:arjan(a)linux.intel.com>> wrote:
From
2e88a61859db0592707d1a0a35e33408a0327951Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan(a)linux.intel.com <mailto:arjan(a)linux.intel.com>>
Date: Sun, 5 Aug 2012 09:57:49 -0700
Subject: [PATCH 2/4] Make the "which C state line" logic betterthe ARM guys complained that their human-readable C state names didn't have numbers in them, and that as a result, the output is all messed up. Using the "
linux_name" instead is only a partial solution; it messes up the x86 side of the logic.
Quoted 6 lines
I fail to understand how using "
linux_name" for parsing C states would mess up x86 logic. Each supported C state will have corresponding 'stateX' directory (linux_name) which contain numbers in them. Also there are few hard coded states in intel_cpus.cpp file, in whichlinux_namecontains numbers in them as well. In both the caseslinux_namecontains numbers and hence safe to parse. Please let me know if I am missing something here.
it contains numbers, but not the right ones
so on x86, the package, core and cpu states do not line up properly if I only use linux_name. (e.g. package C6 and core C6 are on a different line than CPU C6)
with this patch that is kept correctly, while hopefully also fixing your issue.
Rajagopal Venkat
Quoted 30 lines · Arjan van de Ven
Quoted 2 lines · Rajagopal Venkat
On 5 August 2012 22:43, Arjan van de Ven <arjan(a)linux.intel.com <mailto:
Quoted 2 lines · arjan(a)linux.intel.com>> wrote:
From 2e88a61859db0592707d1a0a35e33408a0327951 Mon Sep 17 00:00:002001
Quoted 1 line
From: Arjan van de Ven <arjan(a)linux.intel.com <mailto:
arjan(a)linux.intel.com>>
Quoted 4 lines
Date: Sun, 5 Aug 2012 09:57:49 -0700
Subject: [PATCH 2/4] Make the "which C state line" logic betterthe ARM guys complained that their human-readable C state names
didn't have
Quoted 2 lines
numbers in them, and that as a result, the output is all messed up. Using the "
linux_name" instead is only a partial solution; it messesup the x86
Quoted 4 lines
side of the logic.
I fail to understand how using "
linux_name" for parsing C states wouldmess up
Quoted 1 line
x86 logic. Each supported C state will have corresponding 'stateX'
directory
Quoted 2 lines
(
linux_name) which contain numbers in them. Also there are few hard coded states in intel_cpus.cpp file, in whichlinux_namecontains numbers inthem
Quoted 2 lines
as well. In both the cases
linux_namecontains numbers and hence safe to parse. Please let me know if I am missing something here.
Quoted 8 lines
it contains numbers, but not the right ones
so on x86, the package, core and cpu states do not line up properly if I only uselinux_name.
(e.g. package C6 and core C6 are on a different line than CPU C6) with this patch that is kept correctly, while hopefully also fixing your issue.
Ok. Thanks for the clarification. Yes, this patch fixes my problem as well.
Signature · 2 lines
Regards, Rajagopal