: clarify the file_contexts.subs_dist configuration file usage
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Add a comment at the top of the configuration file file_contexts.subs_dist to clarify that it performs aliasing and not substitutions in the strict sense of the word.
A name change might be considered too, if it proves to lead to further confusion.
There might be pieces of documentation that could benefit from similar considerations.
Also note that a specific manual page is missing.
--- config/file_contexts.subs_dist | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff -pruN refpolicy-08092012/config/file_contexts.subs_dist refpolicy-08092012-file_contexts.subs_dist-comment/config/file_contexts.subs_dist
--- refpolicy-08092012/config/file_contexts.subs_dist 2012-06-21
20:10:29.011803405 +0200
+++
refpolicy-08092012-file_contexts.subs_dist-comment/config/file_contexts.subs_dist
2012-08-10 17:01:36.045451839 +0200
@@ -1,3 +1,13 @@
+# This file can is used to configure base path aliases as in:
+#
+# /aliased_path /original_path_as_configured_in_file_contexts +#
+# where original_path_as_configured_in_file_contexts is a base +# path being used in the main file_contexts configuration file. +#
+# It does not perform substitutions as done by sed(1), for +# example, but aliasing.
+#
/lib32 /lib
/lib64 /lib
/run /var/run
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 24 lines · Guido Trentalancia
Add a comment at the top of the configuration file file_contexts.subs_dist to clarify that it performs aliasing and not substitutions in the strict sense of the word.
A name change might be considered too, if it proves to lead to further confusion.
There might be pieces of documentation that could benefit from similar considerations.
Also note that a specific manual page is missing.
Signed-off-by Guido Trentalancia <[email protected]>--- config/file_contexts.subs_dist | 10 ++++++++++ 1 file changed, 10 insertions(+)diff -pruN refpolicy-08092012/config/file_contexts.subs_dist refpolicy-08092012-file_contexts.subs_dist-comment/config/file_contexts.subs_dist
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +3
-0@@ -1,3 +1,13 @@ +# This file can is used to configure base path aliases as in: +# +# /aliased_path /original_path_as_configured_in_file_contexts
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 line 13
Quoted 10 lines
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +7
-0+# +# where original_path_as_configured_in_file_contexts is a base +# path being used in the main file_contexts configuration file. +# +# It does not perform substitutions as done by sed(1), for +# example, but aliasing. +# /lib32 /lib /lib64 /lib /run /var/run
Merged.
Signature · 3 lines
Chris PeBenito Tresys Technology, LLC www.tresys.com | oss.tresys.com
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 29 lines · Christopher J. PeBenito
Quoted 28 lines · Guido Trentalancia
Add a comment at the top of the configuration file file_contexts.subs_dist to clarify that it performs aliasing and not substitutions in the strict sense of the word.
A name change might be considered too, if it proves to lead to further confusion.
There might be pieces of documentation that could benefit from similar considerations.
Also note that a specific manual page is missing.
Signed-off-by Guido Trentalancia <[email protected]>--- config/file_contexts.subs_dist | 10 ++++++++++ 1 file changed, 10 insertions(+)diff -pruN refpolicy-08092012/config/file_contexts.subs_dist refpolicy-08092012-file_contexts.subs_dist-comment/config/file_contexts.subs_dist
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +7
-0@@ -1,3 +1,13 @@ +# This file can is used to configure base path aliases as in: +# +# /aliased_path /original_path_as_configured_in_file_contexts +# +# where original_path_as_configured_in_file_contexts is a base +# path being used in the main file_contexts configuration file. +#
Quoted 8 lines
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 line 13
Quoted 6 lines
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +3
-0+# It does not perform substitutions as done by sed(1), for +# example, but aliasing. +# /lib32 /lib /lib64 /lib /run /var/runMerged.
This seems to break policycoreutils:
# semanage fcontext -l /usr/sbin/semanage: too many values to unpack (expected 2)
Undoing the comment change fixes things again.
Wkr,
Sven Vermeulen
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 39 lines · Sven Vermeulen
Quoted 29 lines · Christopher J. PeBenito
Quoted 28 lines · Guido Trentalancia
Add a comment at the top of the configuration file file_contexts.subs_dist to clarify that it performs aliasing and not substitutions in the strict sense of the word.
A name change might be considered too, if it proves to lead to further confusion.
There might be pieces of documentation that could benefit from similar considerations.
Also note that a specific manual page is missing.
Signed-off-by Guido Trentalancia <[email protected]>--- config/file_contexts.subs_dist | 10 ++++++++++ 1 file changed, 10 insertions(+)diff -pruN refpolicy-08092012/config/file_contexts.subs_dist refpolicy-08092012-file_contexts.subs_dist-comment/config/file_contexts.subs_dist
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +7
-0@@ -1,3 +1,13 @@ +# This file can is used to configure base path aliases as in: +# +# /aliased_path /original_path_as_configured_in_file_contexts +# +# where original_path_as_configured_in_file_contexts is a base +# path being used in the main file_contexts configuration file. +#Quoted 8 lines
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 line 13
Quoted 6 lines
config/file_contexts.subs_dist 2012-08-10 17:01:36.045451839 +0200 renamed from config/file_contexts.subs_dist 2012-06-21 20:10:29.011803405 +0200 +3
-0+# It does not perform substitutions as done by sed(1), for +# example, but aliasing. +# /lib32 /lib /lib64 /lib /run /var/runMerged.
Quoted 6 lines
This seems to break policycoreutils:
# semanage fcontext -l /usr/sbin/semanage: too many values to unpack (expected 2)Undoing the comment change fixes things again.
Is semanage using the standard library functions to read the file ? Because I had a very quick look through the library and the #-comment skipping code seemed to be there...
Regards,
Guido
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 10 lines · Guido Trentalancia
Quoted 6 lines
This seems to break policycoreutils:
# semanage fcontext -l /usr/sbin/semanage: too many values to unpack (expected 2)Undoing the comment change fixes things again.
Is semanage using the standard library functions to read the file ? Because I had a very quick look through the library and the #-comment skipping code seemed to be there...
fd = open(selinux.selinux_file_context_subs_dist_path(), "r") for i in fd.readlines():
target, substitute = i.split() self.equiv_dist[target] = substitute
fd.close()
Just opens the file, reads lines and assumes there are always two values (target & substitute) on each line. This is from seobject.py.
Wkr,
Sven Vermeulen
PS Sorry for mailing you directly the first time, forgot to update the "To" header...
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Hello Sven.
Quoted 12 lines · Sven Vermeulen
Quoted 10 lines · Guido Trentalancia
Quoted 6 lines
This seems to break policycoreutils:
# semanage fcontext -l /usr/sbin/semanage: too many values to unpack (expected 2)Undoing the comment change fixes things again.
Is semanage using the standard library functions to read the file ? Because I had a very quick look through the library and the #-comment skipping code seemed to be there...
Quoted 8 lines
fd =
open(selinux.selinux_file_context_subs_dist_path(), "r")for i infd.readlines():
target, substitute =i.split()self.equiv_dist[target] = substitute
fd.close()Just opens the file, reads lines and assumes there are always two values (target & substitute) on each line. This is from
seobject.py.
You may have a broken version of the userspace tools.
I have just tested again and the copy of semanage that I have runs fine the above mentioned test.
The version of semanage I am using should be dated June 2012, if that helps...
It's important to keep that note in my opinion, because otherwise it tends to generate confusion due to the somewhat unfortunate name that has been chosen for the file and due to the lack of a specific (userspace) manual page.
I'll be on holidays in a few hours, so don't expect much more from this side anytime soon...
Regards,
Guido
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 5 lines · Guido Trentalancia
You may have a broken version of the userspace tools.
I have just tested again and the copy of semanage that I have runs fine the above mentioned test.
Quoted 7 lines
The version of semanage I am using should be dated June 2012, if that helps...
It's important to keep that note in my opinion, because otherwise it tends to generate confusion due to the somewhat unfortunate name that has been chosen for the file and due to the lack of a specific (userspace) manual page.
The latest release of policycoreutils is from 2012-02-16 (policycoreutils-2.1.10). The one I have is that version, plus a few python-3 supporting fixes. I tried it with Python-2.7 to be sure, but got the same result.
Perhaps your distribution has fixes to it that haven't been made upstream yet (or not in a stable release)?
Wkr,
Sven Vermeulen
PATCH 1/1 : clarify the file_contexts.subs_dist configuration file usage
Quoted 14 lines · Sven Vermeulen
Quoted 5 lines · Guido Trentalancia
You may have a broken version of the userspace tools.
I have just tested again and the copy of semanage that I have runs fine the above mentioned test.
Quoted 7 lines
The version of semanage I am using should be dated June 2012, if that helps...
It's important to keep that note in my opinion, because otherwise it tends to generate confusion due to the somewhat unfortunate name that has been chosen for the file and due to the lack of a specific (userspace) manual page.
Quoted 7 lines
The latest release of policycoreutils is from 2012-02-16 (policycoreutils-2.1.10). The one I have is that version, plus a few python-3 supporting fixes. I tried it with Python-2.7 to be sure, but got the same result.
Perhaps your distribution has fixes to it that haven't been made upstream yet (or not in a stable release)?
I have tested with the SELinux userspace tree dated 4th of June 2012 without any patch applied.
Either it works or it should be made to work as it's just comments and #-comments should be supported in configuration files.
Regards,
Guido