Skip to contentSkip to conversation

gstreamer a2dpSource plugin

DISCUSSION alistair.rodger 2 participants 3 messages Aug 12, 2012 – Aug 15, 2012 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello,

I am looking for some help getting audio out of the bluez stack using gstreamer? Are we still using an alsa source or should we be using the MediaTransport file descriptor.

I am able to generate a sink file descriptor, using the simple-endpoint script, but don't know which gstreamer plugin to use.

I am able stream to a device using the a2dpsink.

Sincerely,
alistair

#1 lore raw

Hi,

Quoted 10 lines · alistair.rodger

Hello,

I am looking for some help getting audio out of the bluez stack using gstreamer? Are we still using an alsa source or should we be using the MediaTransport file descriptor.

I am able to generate a sink file descriptor, using the simple-endpoint script, but don't know which gstreamer plugin to use.

I am able stream to a device using the a2dpsink.

What do you mean by which plugin to use? You are using a2dpsink already, I don't think I got what you want.

I normally test using the following pipeline:

gst-launch -v audiotestsrc ! audio/x-raw-int,channels=2 ! audioconvert ! sbcenc ! a2dpsink transport=/org/bluez/{PID}/hci0/dev_AA_BB_CC_DD_EE_FF/fd0

Signature · 1 line
Luiz Augusto von Dentz
#2 lore raw

I am trying to stream_from_ the device to a local sink. I am therefore looking for something like;

gst-launch alsasrc device=bluetooth ! sbcdec ! ..... or

gst-launch a2dpsource transport=/org/bluez/{PID}/hci0/dev_AA_BB_CC_DD_EE_FF/fd0 ! sbcdec ! ...

preferably the second option as this would use SBC not PCM.

But to clarify, I have been asked to investigate this as part of a product we are developing. So I am trying to understand the approach we should take. As an embedded device we cannot support PulseAudio but instead have been using gstreamer. I can stream_from_ our device using gstreamer but, I understand, the only way to stream to a device, using the higher quality a2dp sbc codec, is using pulse audio.

There are examples on the web using "gst-launch alsasource device=bluetooth ! ..." but I believe this has been deprecated and can only support the SCO headset profile "low" quality audio.

So what I am trying to determine is;

1) Is there a gstreamer source plugin which would take the audio out of the bluetooth stack and pipe it to the "sbcdec" plugin, from which I can pipe it to something like "alsasink"?
2) is it possible to stream the higher quality audio over alsasrc, or is alsa fundamentally only PCM ?
3) Is our only option to create or commission a gstreamer plugin? If so what steps should we take to pursue its creation.

Sincerely,
alistair