Skip to contentSkip to conversation

kvm: i8254: Cache kernel clock offset in KVMPITState

PATCH Applied Jan Kiszka 2 participants 3 messages Aug 14, 2012 KVM

lore
Share & tools
lore

Jan Kiszka

author
#0 lore raw

PATCH 1/2 kvm: i8254: Cache kernel clock offset in KVMPITState

To prepare the final fix for clock calibration issues with the in-kernel PIT, we want to cache the offset between vmclock and the clock used by the in-kernel PIT. So far, we only need to update it when the VM state changes between running and stopped because we only read the in-kernel PIT state while the VM is running.

---
 hw/kvm/i8254.c |   38 ++++++++++++++++++++++++--------------
 1 files changed, 24 insertions(+), 14 deletions(-)
hw/kvm/i8254.c +24 -14
index c5d3711..c235d80 100644
@@ -35,7 +35,8 @@
 typedef struct KVMPITState {
     PITCommonState pit;
     LostTickPolicy lost_tick_policy;
-    bool state_valid;
+    bool vm_stopped;
+    int64_t kernel_clock_offset;
 } KVMPITState;
 
 static int64_t abs64(int64_t v)
@@ -43,19 +44,11 @@ static int64_t abs64(int64_t v)
     return v < 0 ? -v : v;
 }
 
-static void kvm_pit_get(PITCommonState *pit)
+static void kvm_pit_update_clock_offset(KVMPITState *s)
 {
-    KVMPITState *s = DO_UPCAST(KVMPITState, pit, pit);
-    struct kvm_pit_state2 kpit;
-    struct kvm_pit_channel_state *kchan;
-    struct PITChannelState *sc;
     int64_t offset, clock_offset;
     struct timespec ts;
-    int i, ret;
-
-    if (s->state_valid) {
-        return;
-    }
+    int i;
 
     /*
      * Measure the delta between CLOCK_MONOTONIC, the base used for
@@ -72,6 +65,21 @@ static void kvm_pit_get(PITCommonState *pit)
             clock_offset = offset;
         }
     }
+    s->kernel_clock_offset = clock_offset;
+}
+
+static void kvm_pit_get(PITCommonState *pit)
+{
+    KVMPITState *s = DO_UPCAST(KVMPITState, pit, pit);
+    struct kvm_pit_state2 kpit;
+    struct kvm_pit_channel_state *kchan;
+    struct PITChannelState *sc;
+    int i, ret;
+
+    /* No need to re-read the state if VM is stopped. */
+    if (s->vm_stopped) {
+        return;
+    }
 
     if (kvm_has_pit_state2()) {
         ret = kvm_vm_ioctl(kvm_state, KVM_GET_PIT2, &kpit);
@@ -106,7 +114,7 @@ static void kvm_pit_get(PITCommonState *pit)
         sc->mode = kchan->mode;
         sc->bcd = kchan->bcd;
         sc->gate = kchan->gate;
-        sc->count_load_time = kchan->count_load_time + clock_offset;
+        sc->count_load_time = kchan->count_load_time + s->kernel_clock_offset;
     }
 
     sc = &pit->channels[0];
@@ -211,10 +219,12 @@ static void kvm_pit_vm_state_change(void *opaque, int running,
     KVMPITState *s = opaque;
 
     if (running) {
-        s->state_valid = false;
+        kvm_pit_update_clock_offset(s);
+        s->vm_stopped = false;
     } else {
+        kvm_pit_update_clock_offset(s);
         kvm_pit_get(&s->pit);
-        s->state_valid = true;
+        s->vm_stopped = true;
     }
 }
 
Signature · 1 line
1.7.3.4
author
#1 lore raw

PATCH 2/2 kvm: i8254: Finish time conversion fix

0cdd3d1444 fixed reading back the counter load time from the kernel while assuming the kernel would always update its load time on writing the state. That is only true for channel 1, and so pit_get_channel_info returned wrong output pin states for high counter values.

Fix this by applying the offset also on kvm_pit_put. Now we also need to update the offset when we write the state while the VM is stopped as it keeps on changing in that state.

---
 hw/kvm/i8254.c |   14 ++++++++++----
 1 files changed, 10 insertions(+), 4 deletions(-)
hw/kvm/i8254.c +10 -4
index c235d80..53d13e3 100644
@@ -122,17 +122,23 @@ static void kvm_pit_get(PITCommonState *pit)
         pit_get_next_transition_time(sc, sc->count_load_time);
 }
 
-static void kvm_pit_put(PITCommonState *s)
+static void kvm_pit_put(PITCommonState *pit)
 {
+    KVMPITState *s = DO_UPCAST(KVMPITState, pit, pit);
     struct kvm_pit_state2 kpit;
     struct kvm_pit_channel_state *kchan;
     struct PITChannelState *sc;
     int i, ret;
 
-    kpit.flags = s->channels[0].irq_disabled ? KVM_PIT_FLAGS_HPET_LEGACY : 0;
+    /* The offset keeps changing as long as the VM is stopped. */
+    if (s->vm_stopped) {
+        kvm_pit_update_clock_offset(s);
+    }
+
+    kpit.flags = pit->channels[0].irq_disabled ? KVM_PIT_FLAGS_HPET_LEGACY : 0;
     for (i = 0; i < 3; i++) {
         kchan = &kpit.channels[i];
-        sc = &s->channels[i];
+        sc = &pit->channels[i];
         kchan->count = sc->count;
         kchan->latched_count = sc->latched_count;
         kchan->count_latched = sc->count_latched;
@@ -145,7 +151,7 @@ static void kvm_pit_put(PITCommonState *s)
         kchan->mode = sc->mode;
         kchan->bcd = sc->bcd;
         kchan->gate = sc->gate;
-        kchan->count_load_time = sc->count_load_time;
+        kchan->count_load_time = sc->count_load_time - s->kernel_clock_offset;
     }
 
     ret = kvm_vm_ioctl(kvm_state,
Signature · 1 line
1.7.3.4
#2 lore raw
In reply to Jan Kiszka
Quoted 7 lines · Jan Kiszka

To prepare the final fix for clock calibration issues with the in-kernel PIT, we want to cache the offset between vmclock and the clock used by the in-kernel PIT. So far, we only need to update it when the VM state changes between running and stopped because we only read the in-kernel PIT state while the VM is running.

Applied, thanks.