TIPC handling of ethernet mac address change
Subsystems (2)
Hi,
I'm pretty new to tipc so pardon me if I use the wrong terminology. :)
I'm using TIPC 1.7.7 and bonding. I'm seeing some strange behaviour when the bond MAC address changes--the tipc LINK_CONFIG messages still contain the old MAC address embedded in them. This causes the other end to send back to us on the wrong MAC and the packets get dropped.
I see recv_notification() has a case for NETDEV_CHANGEADDR so it looks like MAC address change was intended to be handled, but I'm not entirely clear on where the MAC address is supposed to be changed.
Any assistance on debugging/patching this would be appreciated.
Chris
Signature · 6 lines
Chris Friesen Software Designer 3500 Carling Avenue Ottawa, Ontario K2H 8E9 www.genband.com
Hi Chris,
You are right.
Currently TIPC does not handle the change of mac address. So I will submit a related patch to fix the issue to net-next tree.
Thanks for your report.
Regards,
Ying
Quoted 13 lines · Chris Friesen
Hi,
I'm pretty new to tipc so pardon me if I use the wrong terminology. :)
I'm using TIPC 1.7.7 and bonding. I'm seeing some strange behaviour when the bond MAC address changes--the tipc
LINK_CONFIGmessages still contain the old MAC address embedded in them. This causes the other end to send back to us on the wrong MAC and the packets get dropped.I see
recv_notification()has a case forNETDEV_CHANGEADDRso it looks like MAC address change was intended to be handled, but I'm not entirely clear on where the MAC address is supposed to be changed.Any assistance on debugging/patching this would be appreciated.
Chris