Skip to contentSkip to conversation

2.6.14-rc1[-git1] was Re: [PROBLEM] mtrr's not set, 2.6.13

DISCUSSION Kenneth Parrish 1 participant 1 message Sep 15, 2005

lore
Share & tools
lore
#0 lore raw

-=> In 14 Sep 05 07:50:10 article, Kenneth Parrish wrote to All <=- [..]
KP> Linux fret 2.6.14-rc1 #6 Wed Sep 14 01:05:11 CDT 2005 i686 unknown KP> unknown GNU/Linux

KP> p.s. this 2.6.14-rc1 kernel shows four lines plus one or two pixels KP> of the next line, at the bottom of each text console, filled with KP> what looks like earlier buffer. and it scrolls, with new output. ??

Linux fret 2.6.14-rc1-git1 #1 Thu Sep 15 06:40:15 CDT 2005 i686 unknown unknown GNU/Linux

i have noticed that on tty1 only, once the initial boot-up
messages are cleared from the buffer no new output is looped to the bottom of the screen; but a few tests with a couple of the other five configured tty's has showed new buffer content continually copies to the last few lines (plus a pixel or three).
i commented the vga=290 boot option and the problem remains,
just fewer surprious lines appear.

--