Skip to contentSkip to conversation

U-Boot and missing tftp command

DISCUSSION Pedro I. Sanchez 1 participant 2 messages Aug 31, 2012 – Sep 4, 2012 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello,

I just successfully built a Yocto image for a beagleboard-xm card and noticed that the U-Boot image is missing support for the tftp command.

How do I go about recompiling U-Boot to include this command?

Thanks,

Signature · 1 line
Pedro
#2 lore raw
In reply to a message not in the archive
Quoted 9 lines · Markus Hubig

The 2011.06 version of u-boot as it is used from poky denzil does not support networking at all for the omap3_beagle.

See here line 157:

http://git.denx.de/?p=u-boot.git;a=blob;f=include/configs/omap3_beagle.h;h=9fd80ed50b7135d1365799f76333f988f0bce554;hb=b1af6f532e0d348b153d5c148369229d24af361a

But in version 2012.07 of u-boot it seems to be supported. See here, line 167:

Quoted 26 lines

http://git.denx.de/?p=u-boot.git;a=blob;f=include/configs/omap3_beagle.h;h=657780edcffcf74bc6960fdb48bd7fd92fbf1f7f;hb=190649fb4309d1bc0fe7732fd0f951cb6440f935

So you have to use a newer version of u-boot.

Cheers, Markus

Quoted 16 lines · Pedro I. Sanchez

Hello,

I just successfully built a Yocto image for a beagleboard-xm card and noticed that the U-Boot image is missing support for the tftp command.

How do I go about recompiling U-Boot to include this command?

Thanks,

--
Pedro

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Thank you for the update.

I could take the new version and manually do the build for the board. But I wonder, what would be the Yocto way to request this version of U-Boot in my build? I mean, what exactly would I need to include in, say, my local.conf file, to get the new version automatically downloaded and compiled?

Thanks,

Signature · 1 line
Pedro