ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node
PATCH 1/1 ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node
Remove a useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP.
This will not change the functionality but will reflect the reality more accurately.
---
Hi Tony
This is a minor cleanup done since Santosh's series is introducing some more MPU devices that does not belong to the TI main OCP interconnect. It makes sense for consistency / accuracy to move GIC to the same location.
Regards,
Benoit
arch/arm/boot/dts/omap4.dtsi | 40 ++++++++-------------------------------- 1 files changed, 8 insertions(+), 32 deletions(-)
arch/arm/boot/dts/omap4.dtsi +8 -32
@@ -38,6 +38,14 @@ }; }; + gic: interrupt-controller at 48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + L2: l2-cache-controller at 48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>;
@@ -76,30 +84,6 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy.
@@ -111,14 +95,6 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller at 48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; - }; - gpio1: gpio at 4a310000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1";
Signature · 1 line
1.7.0.4
PATCH 1/1 ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node
Quoted 9 lines · Benoit Cousson
Remove a useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP.
This will not change the functionality but will reflect the reality more accurately.Signed-off-by Benoit Cousson <[email protected]>---
Make sense.
PATCH 1/1 ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP node
Quoted 7 lines · Santosh
Quoted 6 lines · Benoit Cousson
Remove a useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP.
This will not change the functionality but will reflect the reality more accurately.
Quoted 6 lines
Quoted 3 lines
Signed-off-by Benoit Cousson <[email protected]>---
Make sense.
Thanks Santosh,
I'll update the patch with your ack are will add it after your series for Tony to pull.
Thanks,
Benoit