[PATCH] amd iommu: Dump flags of IO page faults

Wei Wang

author

2012-09-05 14:42 UTC #0 lore raw

PATCH 1/1 amd iommu: Dump flags of IO page faults

Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.

Thanks,
Wei

Signed-off-by Wei Wang <[email protected]>

xen/drivers/passthrough/amd/iommu_init.c +6 -3

diff -r 4746414def65 xen/drivers/passthrough/amd/iommu_init.c
@@ -564,7 +564,7 @@ static hw_irq_controller iommu_msi_type 
 
 static void parse_event_log_entry(struct amd_iommu *iommu, u32 entry[])
 {
-    u16 domain_id, device_id, bdf, cword;
+    u16 domain_id, device_id, bdf, cword, flags;
     u32 code;
     u64 *addr;
     int count = 0;

@@ -609,11 +609,14 @@ static void parse_event_log_entry(struct
         domain_id = get_field_from_reg_u32(entry[1],
                                            IOMMU_EVENT_DOMAIN_ID_MASK,
                                            IOMMU_EVENT_DOMAIN_ID_SHIFT);
+        flags = get_field_from_reg_u32(entry[1],
+                                       IOMMU_EVENT_FLAGS_MASK,
+                                       IOMMU_EVENT_FLAGS_SHIFT);
         addr= (u64*) (entry + 2);
         printk(XENLOG_ERR "AMD-Vi: "
                "%s: domain = %d, device id = 0x%04x, "
-               "fault address = 0x%"PRIx64"\n",
-               event_str[code-1], domain_id, device_id, *addr);
+               "fault address = 0x%"PRIx64", flags = 0x%03x\n",
+               event_str[code-1], domain_id, device_id, *addr, flags);
 
         /* Tell the device to stop DMAing; we can't rely on the guest to
          * control it for us. */

xen/include/asm-x86/hvm/svm/amd-iommu-defs.h +2 -0

diff -r 4746414def65 xen/include/asm-x86/hvm/svm/amd-iommu-defs.h
@@ -283,6 +283,8 @@
 #define IOMMU_EVENT_DOMAIN_ID_SHIFT          0
 #define IOMMU_EVENT_DEVICE_ID_MASK           0x0000FFFF
 #define IOMMU_EVENT_DEVICE_ID_SHIFT          0
+#define IOMMU_EVENT_FLAGS_SHIFT              16
+#define IOMMU_EVENT_FLAGS_MASK               0x0FFF0000
 
 /* PPR Log */
 #define IOMMU_PPR_LOG_ENTRY_SIZE                        16

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

Sander Eikelenboom

Applied

2012-09-05 22:59 UTC #1 lore raw

Quoted 8 lines · you

Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang <[email protected]>

I have applied the patch and the flags seem to differ between the faults:

AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020

Complete xl dmesg and lspci -vvvknn attached.

Thx

--
Sander

00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
Subsystem: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Address: 00000000 Data: 0000

00:00.2 Generic system peripheral [0806]: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4151
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9f00000-f9ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4159
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9e00000-f9efffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4161
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9d00000-f9dfffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4169
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9a00000-f9bfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4171
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9900000-f99fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 31.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4179
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:5a20] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9600000-f97fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 14.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4181
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9500000-f95fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4189
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 120
Region 0: I/O ports at 7000 [size=8]
Region 1: I/O ports at 6000 [size=4]
Region 2: I/O ports at 5000 [size=8]
Region 3: I/O ports at 3000 [size=4]
Region 4: I/O ports at 2000 [size=16]
Region 5: Memory at f93ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b9
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:12.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f93fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f93ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f93fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f93ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f93fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:15.0 PCI bridge [0604]: ATI Technologies Inc SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #32, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee3f00c Data: 4191
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:16.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f93fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f93ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback

04:00.0 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f95f8000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pciback

04:00.1 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f95f9000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.2 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f95fa000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.3 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f95fb000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.4 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 42
Region 0: Memory at f95fc000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.5 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 42
Region 0: Memory at f95fd000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.6 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 43
Region 0: Memory at f95fe000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

04:00.7 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 43
Region 0: Memory at f95ff000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX25850 [14f1:8200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f9600000 (64-bit, non-prefetchable) [disabled] [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=1 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Kernel driver in use: pciback

06:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 2: Memory at f99e0000 (64-bit, non-prefetchable) [disabled] [size=64K]
Region 4: I/O ports at b000 [disabled] [size=256]
Expansion ROM at f99c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>

06:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 123
Region 0: Memory at f99fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 412a
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: snd_hda_intel

07:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. Device [14f1:8210]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f9a00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Unknown small resource type 02, will not decode more.
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=1 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Kernel driver in use: pciback

08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9de0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41d9
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
Kernel driver in use: r8169

09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 121
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9ee0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41c9
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 04-00-00-00-68-4c-e0-00
Kernel driver in use: r8169

0a:00.0 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f9ff8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pciback

0a:00.1 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f9ff9000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.2 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.3 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.4 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 30
Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.5 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 30
Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.6 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 31
Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0a:00.7 USB controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 31
Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback

0b:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8266]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at e800 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>

(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 6 CPUs (0 hotplug CPUs)
(XEN) mapped APIC to ffff82c3ffdfe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffdfd000 (fec00000)
(XEN) mapped IOAPIC to ffff82c3ffdfc000 (fec20000)
(XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3200.199 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:

(XEN) AMD-Vi:  Signature IVRS
(XEN) AMD-Vi:  Length 0xf8
(XEN) AMD-Vi:  Revision 0x1
(XEN) AMD-Vi:  CheckSum 0x6e
(XEN) AMD-Vi:  OEM_Id AMD  
(XEN) AMD-Vi:  OEM_Table_Id RD890S
(XEN) AMD-Vi:  OEM_Revision 0x202031
(XEN) AMD-Vi:  Creator_Id AMD 
(XEN) AMD-Vi:  Creator_Revision 0x0
(XEN) AMD-Vi: IVRS Block:
(XEN) AMD-Vi:  Type 0x10
(XEN) AMD-Vi:  Flags 0x3e
(XEN) AMD-Vi:  Length 0xc8
(XEN) AMD-Vi:  Dev_Id 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0x0
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x0 -> 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x10
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xb00
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x18
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0xa00
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0xa00 -> 0xa07
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x28
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x900
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x30
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x800
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x50
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x700
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x58
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0x600
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x600 -> 0x601
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x60
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x500
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x68
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0x400
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x400 -> 0x407
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x88
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0x90
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x90 -> 0x92
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0x98
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x98 -> 0x9a
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa0
(XEN) AMD-Vi:  Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa3
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa4
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x0
(XEN) AMD-Vi:  Dev_Id 0x0
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x43
(XEN) AMD-Vi:  Dev_Id 0x300
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0x300 -> 0x3ff
(XEN) AMD-Vi:  Dev_Id Alias: 0xa4
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa5
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa8
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0xa9
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x2
(XEN) AMD-Vi:  Dev_Id 0x100
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x3
(XEN) AMD-Vi:  Dev_Id 0xb0
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi:  Dev_Id Range: 0xb0 -> 0xb2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x0
(XEN) AMD-Vi:  Dev_Id 0x0
(XEN) AMD-Vi:  Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x48
(XEN) AMD-Vi:  Dev_Id 0x0
(XEN) AMD-Vi:  Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi:  Type 0x48
(XEN) AMD-Vi:  Dev_Id 0x0
(XEN) AMD-Vi:  Flags 0x0

(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) AMD-Vi: Enabling global vector map
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #6 registers: 24.
(XEN) number of IO-APIC #7 registers: 32.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #6......
(XEN) .... register #00: 06000000

(XEN) .......    : physical APIC id: 06
(XEN) .......    : Delivery Type: 0
(XEN) .......    : LTS          : 0
(XEN) .... register #01: 00178021
(XEN) .......     : max redirection entries: 0017
(XEN) .......     : PRQ implemented: 1
(XEN) .......     : IO APIC version: 0021

(XEN) .... register #02: 06000000
(XEN) ....... : arbitration: 06
(XEN) .... register #03: 07000000
(XEN) ....... : Boot DT : 0
(XEN) .... IRQ redirection table:

(XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
(XEN)  00 000 00  1    0    0   0   0    0    0    00
(XEN)  01 001 01  0    0    0   0   0    1    1    30
(XEN)  02 001 01  0    0    0   0   0    1    1    F0
(XEN)  03 001 01  0    0    0   0   0    1    1    38
(XEN)  04 001 01  0    0    0   0   0    1    1    F1
(XEN)  05 001 01  0    0    0   0   0    1    1    40
(XEN)  06 001 01  0    0    0   0   0    1    1    48
(XEN)  07 001 01  0    0    0   0   0    1    1    50
(XEN)  08 001 01  0    0    0   0   0    1    1    58
(XEN)  09 001 01  1    1    0   1   0    1    1    60
(XEN)  0a 001 01  0    0    0   0   0    1    1    68
(XEN)  0b 001 01  0    0    0   0   0    1    1    70
(XEN)  0c 001 01  0    0    0   0   0    1    1    78
(XEN)  0d 001 01  0    0    0   0   0    1    1    88
(XEN)  0e 001 01  0    0    0   0   0    1    1    90
(XEN)  0f 001 01  0    0    0   0   0    1    1    98
(XEN)  10 000 00  1    0    0   0   0    0    0    00
(XEN)  11 000 00  1    0    0   0   0    0    0    00
(XEN)  12 000 00  1    0    0   0   0    0    0    00
(XEN)  13 000 00  1    0    0   0   0    0    0    00
(XEN)  14 000 00  1    0    0   0   0    0    0    00
(XEN)  15 000 00  1    0    0   0   0    0    0    00
(XEN)  16 000 00  1    0    0   0   0    0    0    00
(XEN)  17 000 00  1    0    0   0   0    0    0    00
(XEN) IO APIC #7......
(XEN) .... register #00: 07000000
(XEN) .......    : physical APIC id: 07
(XEN) .......    : Delivery Type: 0
(XEN) .......    : LTS          : 0
(XEN) .... register #01: 001F8021
(XEN) .......     : max redirection entries: 001F
(XEN) .......     : PRQ implemented: 1
(XEN) .......     : IO APIC version: 0021
(XEN) .... register #02: 00000000
(XEN) .......     : arbitration: 00
(XEN) .... IRQ redirection table:
(XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
(XEN)  00 000 00  1    0    0   0   0    0    0    00
(XEN)  01 000 00  1    0    0   0   0    0    0    00
(XEN)  02 000 00  1    0    0   0   0    0    0    00
(XEN)  03 000 00  1    0    0   0   0    0    0    00
(XEN)  04 000 00  1    0    0   0   0    0    0    00
(XEN)  05 000 00  1    0    0   0   0    0    0    00
(XEN)  06 000 00  1    0    0   0   0    0    0    00
(XEN)  07 000 00  1    0    0   0   0    0    0    00
(XEN)  08 000 00  1    0    0   0   0    0    0    00
(XEN)  09 000 00  1    0    0   0   0    0    0    00
(XEN)  0a 000 00  1    0    0   0   0    0    0    00
(XEN)  0b 000 00  1    0    0   0   0    0    0    00
(XEN)  0c 000 00  1    0    0   0   0    0    0    00
(XEN)  0d 000 00  1    0    0   0   0    0    0    00
(XEN)  0e 000 00  1    0    0   0   0    0    0    00
(XEN)  0f 000 00  1    0    0   0   0    0    0    00
(XEN)  10 000 00  1    0    0   0   0    0    0    00
(XEN)  11 000 00  1    0    0   0   0    0    0    00
(XEN)  12 000 00  1    0    0   0   0    0    0    00
(XEN)  13 000 00  1    0    0   0   0    0    0    00
(XEN)  14 000 00  1    0    0   0   0    0    0    00
(XEN)  15 000 00  1    0    0   0   0    0    0    00
(XEN)  16 000 00  1    0    0   0   0    0    0    00
(XEN)  17 000 00  1    0    0   0   0    0    0    00
(XEN)  18 000 00  1    0    0   0   0    0    0    00
(XEN)  19 000 00  1    0    0   0   0    0    0    00
(XEN)  1a 000 00  1    0    0   0   0    0    0    00
(XEN)  1b 000 00  1    0    0   0   0    0    0    00
(XEN)  1c 000 00  1    0    0   0   0    0    0    00
(XEN)  1d 000 00  1    0    0   0   0    0    0    00
(XEN)  1e 000 00  1    0    0   0   0    0    0    00
(XEN)  1f 000 00  1    0    0   0   0    0    0    00

(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ64 -> 0:5
(XEN) IRQ72 -> 0:6
(XEN) IRQ80 -> 0:7
(XEN) IRQ88 -> 0:8
(XEN) IRQ96 -> 0:9
(XEN) IRQ104 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done. (XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3200.1378 MHz.
(XEN) ..... host bus clock speed is 200.0085 MHz. (XEN) ..... bus_scale = 0x0000CCD7
(XEN) [2012-09-05 15:49:09] Platform timer is 14.318MHz HPET (XEN) [2012-09-05 15:49:09] Allocated console ring of 64 KiB. (XEN) [2012-09-05 15:49:09] HVM: ASIDs enabled. (XEN) [2012-09-05 15:49:09] SVM: Supported advanced features:

(XEN) [2012-09-05 15:49:09]  - Nested Page Tables (NPT)
(XEN) [2012-09-05 15:49:09]  - Last Branch Record (LBR) Virtualisation
(XEN) [2012-09-05 15:49:09]  - Next-RIP Saved on #VMEXIT
(XEN) [2012-09-05 15:49:09]  - Pause-Intercept Filter

(XEN) [2012-09-05 15:49:09] HVM: SVM enabled
(XEN) [2012-09-05 15:49:09] HVM: Hardware Assisted Paging (HAP) detected
(XEN) [2012-09-05 15:49:09] HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) [2012-09-05 15:49:08] masked ExtINT on CPU#1
(XEN) [2012-09-05 15:49:09] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-09-05 15:49:08] masked ExtINT on CPU#2
(XEN) [2012-09-05 15:49:09] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-09-05 15:49:08] masked ExtINT on CPU#3
(XEN) [2012-09-05 15:49:09] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-09-05 15:49:08] masked ExtINT on CPU#4
(XEN) [2012-09-05 15:49:09] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-09-05 15:49:08] masked ExtINT on CPU#5
(XEN) [2012-09-05 15:49:09] Brought up 6 CPUs
(XEN) [2012-09-05 15:49:09] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-09-05 15:49:09] HPET's MSI mode hasn't been supported when Interrupt Remapping is enabled. (XEN) [2012-09-05 15:49:09] ACPI sleep modes: S3
(XEN) [2012-09-05 15:49:09] MCA: Use hw thresholding to adjust polling frequency (XEN) [2012-09-05 15:49:09] mcheck_poll: Machine check polling timer started.
(XEN) [2012-09-05 15:49:09] Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff (XEN) [2012-09-05 15:49:09] *** LOADING DOMAIN 0 ***
(XEN) [2012-09-05 15:49:09] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xd6a000 (XEN) [2012-09-05 15:49:09] elf_parse_binary: phdr: paddr=0x1e00000 memsz=0xdb0e8 (XEN) [2012-09-05 15:49:09] elf_parse_binary: phdr: paddr=0x1edc000 memsz=0x13c00 (XEN) [2012-09-05 15:49:09] elf_parse_binary: phdr: paddr=0x1ef0000 memsz=0xde5000 (XEN) [2012-09-05 15:49:09] elf_parse_binary: memory: 0x1000000 -> 0x2cd5000
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: GUEST_OS = "linux"
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: ENTRY = 0xffffffff81ef0210
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 (XEN) [2012-09-05 15:49:09] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) [2012-09-05 15:49:09] elf_xen_parse_note: PAE_MODE = "yes"
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: LOADER = "generic"
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) [2012-09-05 15:49:09] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) [2012-09-05 15:49:09] elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) [2012-09-05 15:49:09] elf_xen_addr_calc_check: addresses:

(XEN) [2012-09-05 15:49:09]     virt_base        = 0xffffffff80000000
(XEN) [2012-09-05 15:49:09]     elf_paddr_offset = 0x0
(XEN) [2012-09-05 15:49:09]     virt_offset      = 0xffffffff80000000
(XEN) [2012-09-05 15:49:09]     virt_kstart      = 0xffffffff81000000
(XEN) [2012-09-05 15:49:09]     virt_kend        = 0xffffffff82cd5000
(XEN) [2012-09-05 15:49:09]     virt_entry       = 0xffffffff81ef0210
(XEN) [2012-09-05 15:49:09]     p2m_base         = 0xffffffffffffffff

(XEN) [2012-09-05 15:49:09] Xen kernel: 64-bit, lsb, compat32
(XEN) [2012-09-05 15:49:09] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2cd5000 (XEN) [2012-09-05 15:49:09] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2012-09-05 15:49:09] Dom0 alloc.: 0000000240000000->0000000244000000 (242428 pages to be allocated)
(XEN) [2012-09-05 15:49:09] Init. ramdisk: 000000024f2fc000->000000024ffff800 (XEN) [2012-09-05 15:49:09] VIRTUAL MEMORY ARRANGEMENT:

(XEN) [2012-09-05 15:49:09]  Loaded kernel: ffffffff81000000->ffffffff82cd5000
(XEN) [2012-09-05 15:49:09]  Init. ramdisk: ffffffff82cd5000->ffffffff839d8800
(XEN) [2012-09-05 15:49:09]  Phys-Mach map: ffffffff839d9000->ffffffff83bd9000
(XEN) [2012-09-05 15:49:09]  Start info:    ffffffff83bd9000->ffffffff83bd94b4
(XEN) [2012-09-05 15:49:09]  Page tables:   ffffffff83bda000->ffffffff83bfd000
(XEN) [2012-09-05 15:49:09]  Boot stack:    ffffffff83bfd000->ffffffff83bfe000
(XEN) [2012-09-05 15:49:09]  TOTAL:         ffffffff80000000->ffffffff84000000
(XEN) [2012-09-05 15:49:09]  ENTRY ADDRESS: ffffffff81ef0210

(XEN) [2012-09-05 15:49:09] Dom0 has maximum 6 VCPUs
(XEN) [2012-09-05 15:49:09] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81d6a000
(XEN) [2012-09-05 15:49:09] elf_load_binary: phdr 1 at 0xffffffff81e00000 -> 0xffffffff81edb0e8
(XEN) [2012-09-05 15:49:09] elf_load_binary: phdr 2 at 0xffffffff81edc000 -> 0xffffffff81eefc00
(XEN) [2012-09-05 15:49:09] elf_load_binary: phdr 3 at 0xffffffff81ef0000 -> 0xffffffff81f89000
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0000, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0002, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0010, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0018, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0028, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0030, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0050, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0058, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0060, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0068, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0088, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0090, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0092, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0098, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x009a, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00a0, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00a3, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00a4, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00a5, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00a8, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00b0, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x00b2, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: No iommu for device 0000:00:18.0
(XEN) [2012-09-05 15:49:10] AMD-Vi: No iommu for device 0000:00:18.1
(XEN) [2012-09-05 15:49:10] AMD-Vi: No iommu for device 0000:00:18.2
(XEN) [2012-09-05 15:49:10] AMD-Vi: No iommu for device 0000:00:18.3
(XEN) [2012-09-05 15:49:10] AMD-Vi: No iommu for device 0000:00:18.4
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0400, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0401, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0402, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0403, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0404, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0405, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0406, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0407, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0500, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0600, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0601, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0700, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0800, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0900, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a00, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a01, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a02, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a03, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a04, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a05, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a06, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0a07, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] AMD-Vi: Setup I/O page table: device id = 0x0b00, root table = 0x24d84b000, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:49:10] Scrubbing Free RAM: ...........................<0>AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 15:49:11] ............................................done.
(XEN) [2012-09-05 15:49:12] Initial low memory virq threshold set at 0x4000 pages.
(XEN) [2012-09-05 15:49:12] Std. Loglevel: All
(XEN) [2012-09-05 15:49:12] Guest Loglevel: All
(XEN) [2012-09-05 15:49:12] Xen is relinquishing VGA console.
(XEN) [2012-09-05 15:49:12] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2012-09-05 15:49:12] Freed 256kB init memory.
(XEN) [2012-09-05 15:49:12] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> IRQ 9 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0010004 from 0x0000eff0bdfb1fce to 0x000000000000abcd.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:12] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000408 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] traps.c:2584:d0 Domain attempted WRMSR 00000000c0000409 from 0xc000000001000000 to 0xc008000001000000.
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:00.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:02.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:03.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:05.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:06.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:0a.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:0b.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:0c.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:0d.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:11.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:12.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:12.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:13.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:13.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:14.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:14.3
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:14.4
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:14.5
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:15.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:16.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:16.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:18.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:18.1
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:18.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:18.3
(XEN) [2012-09-05 15:49:13] PCI add device 0000:00:18.4
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0b:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.1
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.3
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.4
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.5
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.6
(XEN) [2012-09-05 15:49:13] PCI add device 0000:0a:00.7
(XEN) [2012-09-05 15:49:13] PCI add device 0000:09:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:08:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:07:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:06:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:06:00.1
(XEN) [2012-09-05 15:49:13] PCI add device 0000:05:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.0
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.1
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.2
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.3
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.4
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.5
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.6
(XEN) [2012-09-05 15:49:13] PCI add device 0000:04:00.7
(XEN) [2012-09-05 15:49:13] PCI add device 0000:03:06.0
(XEN) [2012-09-05 15:49:13] IOAPIC[0]: Set PCI routing entry (6-8 -> 0x58 -> IRQ 8 Mode:0 Active:0)
(XEN) [2012-09-05 15:49:13] IOAPIC[0]: Set PCI routing entry (6-13 -> 0x88 -> IRQ 13 Mode:0 Active:0)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-28 -> 0xa0 -> IRQ 52 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-29 -> 0xa8 -> IRQ 53 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-30 -> 0xb0 -> IRQ 54 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[0]: Set PCI routing entry (6-16 -> 0xb8 -> IRQ 16 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[0]: Set PCI routing entry (6-18 -> 0xc0 -> IRQ 18 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[0]: Set PCI routing entry (6-17 -> 0xc8 -> IRQ 17 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-4 -> 0xd0 -> IRQ 28 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-5 -> 0xd8 -> IRQ 29 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-6 -> 0x21 -> IRQ 30 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-7 -> 0x29 -> IRQ 31 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-16 -> 0x31 -> IRQ 40 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-17 -> 0x39 -> IRQ 41 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-18 -> 0x41 -> IRQ 42 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:13] IOAPIC[1]: Set PCI routing entry (7-19 -> 0x49 -> IRQ 43 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[0]: Set PCI routing entry (6-22 -> 0x99 -> IRQ 22 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[1]: Set PCI routing entry (7-12 -> 0xa1 -> IRQ 36 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[1]: Set PCI routing entry (7-23 -> 0xa9 -> IRQ 47 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[0]: Set PCI routing entry (6-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[1]: Set PCI routing entry (7-22 -> 0xc1 -> IRQ 46 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:14] IOAPIC[1]: Set PCI routing entry (7-27 -> 0xd1 -> IRQ 51 Mode:1 Active:1)
(XEN) [2012-09-05 15:49:16] IOAPIC[1]: Set PCI routing entry (7-9 -> 0x22 -> IRQ 33 Mode:1 Active:1)
(XEN) [2012-09-05 15:50:19] traps.c:2584:d1 Domain attempted WRMSR 00000000c0010004 from 0x00006fb039de7900 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:25] traps.c:2584:d2 Domain attempted WRMSR 00000000c0010004 from 0x000042345a0da545 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:37] traps.c:2584:d3 Domain attempted WRMSR 00000000c0010004 from 0x00006fb039de7900 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:37] traps.c:2584:d4 Domain attempted WRMSR 00000000c0010004 from 0x00006fb039de7900 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:43] traps.c:2584:d5 Domain attempted WRMSR 00000000c0010004 from 0x000042345a0da545 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:49] traps.c:2584:d6 Domain attempted WRMSR 00000000c0010004 from 0x000042345a0da545 to 0x000000000000abcd.
(XEN) [2012-09-05 15:50:55] traps.c:2584:d7 Domain attempted WRMSR 00000000c0010004 from 0x0000a195c40f618f to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:01] traps.c:2584:d8 Domain attempted WRMSR 00000000c0010004 from 0x00008679c02b4165 to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:07] traps.c:2584:d9 Domain attempted WRMSR 00000000c0010004 from 0x0000a195c40f618f to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:13] traps.c:2584:d10 Domain attempted WRMSR 00000000c0010004 from 0x0000a195c40f618f to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:22] AMD-Vi: Disable: device id = 0x00a4, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:22] AMD-Vi: Setup I/O page table: device id = 0x00a4, root table = 0x18e0a1000, domain = 11, paging mode = 3
(XEN) [2012-09-05 15:51:22] AMD-Vi: Re-assign 0000:03:06.0 from dom0 to dom11
(XEN) [2012-09-05 15:51:22] traps.c:2584:d11 Domain attempted WRMSR 00000000c0010004 from 0x0000a195c40f618f to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:28] traps.c:2584:d12 Domain attempted WRMSR 00000000c0010004 from 0x0000a195c40f618f to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:35] traps.c:2584:d13 Domain attempted WRMSR 00000000c0010004 from 0x000042345a0da545 to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a00, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a00, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.0 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a01, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a01, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.1 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a02, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a02, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.2 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a03, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a03, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.3 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a04, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a04, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.4 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a05, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a05, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.5 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a06, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a06, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.6 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0a07, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0a07, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:0a:00.7 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] AMD-Vi: Disable: device id = 0x0700, domain = 0, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Setup I/O page table: device id = 0x0700, root table = 0x1e1fc0000, domain = 14, paging mode = 3
(XEN) [2012-09-05 15:51:41] AMD-Vi: Re-assign 0000:07:00.0 from dom0 to dom14
(XEN) [2012-09-05 15:51:41] traps.c:2584:d14 Domain attempted WRMSR 00000000c0010004 from 0x000042345a0da545 to 0x000000000000abcd.
(XEN) [2012-09-05 15:51:56] HVM15: HVM Loader
(XEN) [2012-09-05 15:51:56] HVM15: Detected Xen v4.2.0-rc4-pre
(XEN) [2012-09-05 15:51:56] HVM15: Xenbus rings @0xfeffc000, event channel 4
(XEN) [2012-09-05 15:51:56] HVM15: System requested ROMBIOS
(XEN) [2012-09-05 15:51:56] HVM15: CPU speed is 3200 MHz
(XEN) [2012-09-05 15:51:56] irq.c:270: Dom15 PCI link 0 changed 0 -> 5
(XEN) [2012-09-05 15:51:56] HVM15: PCI-ISA link 0 routed to IRQ5
(XEN) [2012-09-05 15:51:56] irq.c:270: Dom15 PCI link 1 changed 0 -> 10
(XEN) [2012-09-05 15:51:56] HVM15: PCI-ISA link 1 routed to IRQ10
(XEN) [2012-09-05 15:51:56] irq.c:270: Dom15 PCI link 2 changed 0 -> 11
(XEN) [2012-09-05 15:51:56] HVM15: PCI-ISA link 2 routed to IRQ11
(XEN) [2012-09-05 15:51:56] irq.c:270: Dom15 PCI link 3 changed 0 -> 5
(XEN) [2012-09-05 15:51:56] HVM15: PCI-ISA link 3 routed to IRQ5
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 01:2 INTD->IRQ5
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 01:3 INTA->IRQ10
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 03:0 INTA->IRQ5
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 04:0 INTA->IRQ5
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 03:0 bar 14 size 01000000: f2000008
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 04:0 bar 10 size 00020000: f3000000
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 02:0 bar 14 size 00001000: f3020000
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 03:0 bar 10 size 00000100: 0000c001
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 04:0 bar 14 size 00000040: 0000c101
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 01:2 bar 20 size 00000020: 0000c141
(XEN) [2012-09-05 15:51:56] HVM15: pci dev 01:1 bar 20 size 00000010: 0000c161
(XEN) [2012-09-05 15:51:56] HVM15: Multiprocessor initialisation:
(XEN) [2012-09-05 15:51:56] HVM15: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) [2012-09-05 15:51:56] HVM15: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) [2012-09-05 15:51:56] HVM15: Testing HVM environment:
(XEN) [2012-09-05 15:51:56] HVM15: - REP INSB across page boundaries ... passed
(XEN) [2012-09-05 15:51:56] HVM15: - GS base MSRs and SWAPGS ... passed
(XEN) [2012-09-05 15:51:56] HVM15: Passed 2 of 2 tests
(XEN) [2012-09-05 15:51:56] HVM15: Writing SMBIOS tables ...
(XEN) [2012-09-05 15:51:56] HVM15: Loading ROMBIOS ...
(XEN) [2012-09-05 15:51:56] HVM15: 9660 bytes of ROMBIOS high-memory extensions:
(XEN) [2012-09-05 15:51:56] HVM15: Relocating to 0xfc001000-0xfc0035bc ... done
(XEN) [2012-09-05 15:51:56] HVM15: Creating MP tables ...
(XEN) [2012-09-05 15:51:56] HVM15: Loading Cirrus VGABIOS ...
(XEN) [2012-09-05 15:51:56] HVM15: Loading PCI Option ROM ...
(XEN) [2012-09-05 15:51:56] HVM15: - Manufacturer: http://ipxe.org
(XEN) [2012-09-05 15:51:56] HVM15: - Product name: iPXE
(XEN) [2012-09-05 15:51:56] HVM15: Option ROMs:
(XEN) [2012-09-05 15:51:56] HVM15: c0000-c8fff: VGA BIOS
(XEN) [2012-09-05 15:51:56] HVM15: c9000-d9fff: Etherboot ROM
(XEN) [2012-09-05 15:51:56] HVM15: Loading ACPI ...
(XEN) [2012-09-05 15:51:56] HVM15: vm86 TSS at fc00f680
(XEN) [2012-09-05 15:51:56] HVM15: BIOS map:
(XEN) [2012-09-05 15:51:56] HVM15: f0000-fffff: Main BIOS
(XEN) [2012-09-05 15:51:56] HVM15: E820 table:

(XEN) [2012-09-05 15:51:56] HVM15:  [00]: 00000000:00000000 - 00000000:0009e000: RAM
(XEN) [2012-09-05 15:51:56] HVM15:  [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED
(XEN) [2012-09-05 15:51:56] HVM15:  HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) [2012-09-05 15:51:56] HVM15:  [02]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) [2012-09-05 15:51:56] HVM15:  [03]: 00000000:00100000 - 00000000:1f800000: RAM
(XEN) [2012-09-05 15:51:56] HVM15:  HOLE: 00000000:1f800000 - 00000000:fc000000
(XEN) [2012-09-05 15:51:56] HVM15:  [04]: 00000000:fc000000 - 00000001:00000000: RESERVED

(XEN) [2012-09-05 15:51:56] HVM15: Invoking ROMBIOS ...
(XEN) [2012-09-05 15:51:56] HVM15: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) [2012-09-05 15:51:57] stdvga.c:147:d15 entering stdvga and caching modes
(XEN) [2012-09-05 15:51:57] HVM15: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) [2012-09-05 15:51:57] HVM15: Bochs BIOS - build: 06/23/99
(XEN) [2012-09-05 15:51:57] HVM15: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) [2012-09-05 15:51:57] HVM15: Options: apmbios pcibios eltorito PMM
(XEN) [2012-09-05 15:51:57] HVM15:
(XEN) [2012-09-05 15:51:57] HVM15: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) [2012-09-05 15:51:57] HVM15: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (57244 MBytes)
(XEN) [2012-09-05 15:51:58] HVM15: IDE time out
(XEN) [2012-09-05 15:51:58] HVM15: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) [2012-09-05 15:52:00] HVM15: IDE time out
(XEN) [2012-09-05 15:52:00] HVM15:
(XEN) [2012-09-05 15:52:00] HVM15:
(XEN) [2012-09-05 15:52:00] HVM15:
(XEN) [2012-09-05 15:52:00] HVM15: Press F12 for boot menu.
(XEN) [2012-09-05 15:52:00] HVM15:
(XEN) [2012-09-05 15:52:00] HVM15: Booting from Hard Disk...
(XEN) [2012-09-05 15:52:00] HVM15: Booting from 0000:7c00
(XEN) [2012-09-05 15:52:04] traps.c:2584:d16 Domain attempted WRMSR 00000000c0010004 from 0x00008679c02b4165 to 0x000000000000abcd. (XEN) [2012-09-05 15:52:27] traps.c:3156: GPF (0060): ffff82c48015c9fe -> ffff82c480224b83
(XEN) [2012-09-05 15:52:27] traps.c:3157: show_execution_state(regs):
(XEN) [2012-09-05 15:52:27] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:52:27] CPU: 2
(XEN) [2012-09-05 15:52:27] RIP: e008:[<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:52:27] RFLAGS: 0000000000010246 CONTEXT: hypervisor

(XEN) [2012-09-05 15:52:27] rax: 0000000000000001   rbx: ffff8300a52d9000   rcx: 0000000000000001
(XEN) [2012-09-05 15:52:27] rdx: 0000000000000063   rsi: 0000000000000001   rdi: 0000000000000171
(XEN) [2012-09-05 15:52:27] rbp: ffff83024d8b7e28   rsp: ffff83024d8b7d88   r8:  0000000000000006
(XEN) [2012-09-05 15:52:27] r9:  ffff8300afd07060   r10: 00000000deadbeef   r11: 0000000000000246
(XEN) [2012-09-05 15:52:27] r12: ffff8300afd07000   r13: 0000000000000002   r14: 0000000000000002
(XEN) [2012-09-05 15:52:27] r15: ffff83024d950048   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:52:27] cr3: 000000006845c000   cr2: 00000000f760c88f
(XEN) [2012-09-05 15:52:27] ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e010   cs: e008
(XEN) [2012-09-05 15:52:27] Xen stack trace from rsp=ffff83024d8b7d88:
(XEN) [2012-09-05 15:52:27]    ffff83024d8b7ef8 ffff82c48010ed7b 0000001e65755078 0000000065b51000
(XEN) [2012-09-05 15:52:27]    ffff830065b51060 ffff83024d950060 ffff83024d8b7e18 ffff82c4801805be
(XEN) [2012-09-05 15:52:27]    00000000000000b4 000000aef74629d0 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:52:27]    0000000000000000 0000000000000000 ffff83024d8b7e28 ffff8300afd07000
(XEN) [2012-09-05 15:52:27]    ffff8300a52d9000 0000002e540e5245 0000000000000002 ffff83024d950048
(XEN) [2012-09-05 15:52:27]    ffff83024d8b7eb8 ffff82c480124a70 00ff83024d8b7e88 ffff83024d950040
(XEN) [2012-09-05 15:52:27]    000000025771aa27 0000002e540e5245 ffff83024d8b7e88 ffffffffffffffc2
(XEN) [2012-09-05 15:52:27]    ffff8300a52d9000 0000000001c9c380 ffff83024d8b7e00 ffff82c4801226ce
(XEN) [2012-09-05 15:52:27]    ffff83024d8b7ef8 ffff82c4802d8100 00000000ffffffff ffff82c4802d8000
(XEN) [2012-09-05 15:52:27]    ffff83024d8b7f18 ffffffffffffffff ffff83024d8b7ef8 ffff82c480125e31
(XEN) [2012-09-05 15:52:27]    0000000000000246 ffff8300afd07000 ffffffff81ece5d8 0000000000000000
(XEN) [2012-09-05 15:52:27]    0000000000000000 0000000000000000 ffff83024d8b7f08 ffff82c480125e68
(XEN) [2012-09-05 15:52:27]    00007cfdb27480c7 ffff82c480222f06 0000000000000000 ffffffff81e13880
(XEN) [2012-09-05 15:52:27]    0000000000000000 ffff88001e0b00d8 ffffffff81e01ce8 ffff88001fc0b100
(XEN) [2012-09-05 15:52:27]    0000000000000202 0000000000000000 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:52:27]    0000000000000000 ffffffff810011aa ffff88001ead30c0 00000000deadbeef
(XEN) [2012-09-05 15:52:27]    00000000deadbeef 0000010000000000 ffffffff810011aa 000000000000e033
(XEN) [2012-09-05 15:52:27]    0000000000000202 ffffffff81e01cb0 000000000000e02b 00005bfd0000beef
(XEN) [2012-09-05 15:52:27]    800000000000beef 740000000000beef 000000000018beef 00005bfe00000002
(XEN) [2012-09-05 15:52:27]    ffff8300a52d9000 0000003dcd64e680 000000000018e0c9
(XEN) [2012-09-05 15:52:27] Xen call trace:
(XEN) [2012-09-05 15:52:27]    [<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:52:27]    [<ffff82c480124a70>] schedule+0x666/0x675
(XEN) [2012-09-05 15:52:27]    [<ffff82c480125e31>] __do_softirq+0xa4/0xb5
(XEN) [2012-09-05 15:52:27]    [<ffff82c480125e68>] do_softirq+0x26/0x28

(XEN) [2012-09-05 15:52:27]
(XEN) [2012-09-05 15:52:27] traps.c:3159: show_execution_state(guest_cpu_user_regs()):
(XEN) [2012-09-05 15:52:27] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:52:27] CPU: 2
(XEN) [2012-09-05 15:52:27] RIP: e033:[<ffffffff810011aa>]
(XEN) [2012-09-05 15:52:27] RFLAGS: 0000000000000202 EM: 1 CONTEXT: pv guest

(XEN) [2012-09-05 15:52:27] rax: 0000000000000000   rbx: ffff88001fc0b100   rcx: ffffffff810011aa
(XEN) [2012-09-05 15:52:27] rdx: ffff88001ead30c0   rsi: 00000000deadbeef   rdi: 00000000deadbeef
(XEN) [2012-09-05 15:52:27] rbp: ffffffff81e01ce8   rsp: ffffffff81e01cb0   r8:  0000000000000000
(XEN) [2012-09-05 15:52:27] r9:  0000000000000000   r10: 0000000000000000   r11: 0000000000000202
(XEN) [2012-09-05 15:52:27] r12: ffff88001e0b00d8   r13: 0000000000000000   r14: ffffffff81e13880
(XEN) [2012-09-05 15:52:27] r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:52:27] cr3: 000000006845c000   cr2: 00000000f760c88f
(XEN) [2012-09-05 15:52:27] ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) [2012-09-05 15:52:27] Guest stack trace from rsp=ffffffff81e01cb0:
(XEN) [2012-09-05 15:52:27]    0000000000000000 0000000000000001 ffffffff81004942 ffffffff81e13420
(XEN) [2012-09-05 15:52:27]    ffff88001ead30c0 0000000000000000 ffffffff81e13880 ffffffff81e01d08
(XEN) [2012-09-05 15:52:27]    ffffffff81003941 ffff88001ead30c0 ffffffff81e13420 ffffffff81e01d68
(XEN) [2012-09-05 15:52:27]    ffffffff8100b850 ffffffff81e13420 0000000000000001 0000000000000063
(XEN) [2012-09-05 15:52:27]    ffff88001fc10a80 ffffffff81e01d78 ffff88001fc12e80 0000000000000000
(XEN) [2012-09-05 15:52:27]    ffff88001ccd6880 0000000000000082 ffffffff810f0040 ffffffff81e13420
(XEN) [2012-09-05 15:52:27]    ffffffff817fa2f5 ffffffff81e01ec8 0000000000000216 ffff88001fc0e698
(XEN) [2012-09-05 15:52:27]    0000000000000001 ffffffff81e13420 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:52:27]    ffffffff81e00010 0000000000012e80 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:52:27]    0000000000012e80 ffff88001ead2080 ffffffff81e13420 ffff88001fc0e8a0
(XEN) [2012-09-05 15:52:27]    0000000000000000 ffffffff81e01e98 ffffffff8108b381 0000000000000001
(XEN) [2012-09-05 15:52:27]    ffffffff810ab221 0000000181e01e28 0000000000000000 0000000081e01e48
(XEN) [2012-09-05 15:52:27]    0000000000000070 000000001fc0e8a0 000000000000e680 0000000000000000
(XEN) [2012-09-05 15:52:27]    ffffffff81e13420 ffffffff810a86fc 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:52:27]    0000000000000000 ffffffff81e01e98 ffffffff810acb78 ffff88001fc0e8a0
(XEN) [2012-09-05 15:52:27]    00000005739d05d9 ffffffff81e01ea8 ffffffff81e00010 ffffffff81ece5d8
(XEN) [2012-09-05 15:52:27]    ffffffff81f420c0 0000000000000000 0000000000000000 ffffffff81e01ed8
(XEN) [2012-09-05 15:52:27]    ffffffff817fa814 ffffffff81e01ef8 ffffffff81016456 0000000000000002
(XEN) [2012-09-05 15:52:27]    ffffffff81f39920 ffffffff81e01f28 ffffffff817d5b8c ffffffff817d5ad0
(XEN) [2012-09-05 15:52:27]    ffff880000001000 ffffffff81e01f28 0000000000000000 ffffffff81e01f78

(XEN) [2012-09-05 15:52:28] irq.c:270: Dom15 PCI link 0 changed 5 -> 0
(XEN) [2012-09-05 15:52:28] irq.c:270: Dom15 PCI link 1 changed 10 -> 0
(XEN) [2012-09-05 15:52:28] irq.c:270: Dom15 PCI link 2 changed 11 -> 0
(XEN) [2012-09-05 15:52:28] irq.c:270: Dom15 PCI link 3 changed 5 -> 0
(XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xde, mfn=0xa4a08 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xde, mfn=0xa4a08 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xde, mfn=0xa4a08 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xde, mfn=0xa4a08 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdc, mfn=0xa4a0a (XEN) [2012-09-05 15:52:28] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xc9, mfn=0xa4a1d (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xcb, mfn=0xa4a1b (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xcd, mfn=0xa4a19 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xcf, mfn=0xa4a17 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd1, mfn=0xa4a15 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd3, mfn=0xa4a13 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639 (XEN) [2012-09-05 15:52:31] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637 (XEN) [2012-09-05 15:58:42] traps.c:3156: GPF (0060): ffff82c48015c9fe -> ffff82c480224b83 (XEN) [2012-09-05 15:58:42] traps.c:3157: show_execution_state(regs):
(XEN) [2012-09-05 15:58:42] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:58:42] CPU: 3
(XEN) [2012-09-05 15:58:42] RIP: e008:[<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:58:42] RFLAGS: 0000000000010246 CONTEXT: hypervisor

(XEN) [2012-09-05 15:58:42] rax: 0000000000000001   rbx: ffff8300a52d9000   rcx: 0000000000000001
(XEN) [2012-09-05 15:58:42] rdx: 0000000000000063   rsi: 0000000000000001   rdi: 000000000000015c
(XEN) [2012-09-05 15:58:42] rbp: ffff83024d8a7e28   rsp: ffff83024d8a7d88   r8:  0000000000000006
(XEN) [2012-09-05 15:58:42] r9:  ffff8300afd07060   r10: 00000000deadbeef   r11: 0000000000000246
(XEN) [2012-09-05 15:58:42] r12: ffff8300afd07000   r13: 0000000000000003   r14: 0000000000000003
(XEN) [2012-09-05 15:58:42] r15: ffff83024d8aa048   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:58:42] cr3: 0000000068144000   cr2: 00000000f76ad934
(XEN) [2012-09-05 15:58:42] ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e010   cs: e008
(XEN) [2012-09-05 15:58:42] Xen stack trace from rsp=ffff83024d8a7d88:
(XEN) [2012-09-05 15:58:42]    ffff83024d8a7dd8 0000000000000282 0000001e772fd6d9 0000000000000282
(XEN) [2012-09-05 15:58:42]    ffff830065b51060 ffff83024d8aa060 ffff83024d8a7e18 ffff82c4801805be
(XEN) [2012-09-05 15:58:42]    000000000000094a 000001c5a9cef942 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:58:42]    0000000000000000 0000000000000000 ffff83024d8a7e28 ffff8300afd07000
(XEN) [2012-09-05 15:58:42]    ffff8300a52d9000 00000085769839f0 0000000000000002 ffff83024d8aa048
(XEN) [2012-09-05 15:58:42]    ffff83024d8a7eb8 ffff82c480124a70 00ff83024d8a7e88 ffff83024d8aa040
(XEN) [2012-09-05 15:58:42]    000000038ca15dc4 00000085769839f0 ffff83024d8a7e88 ffffffffffffffc2
(XEN) [2012-09-05 15:58:42]    ffff8300a52d9000 0000000001c9c380 ffff83024d8a7e00 ffff82c4801226ce
(XEN) [2012-09-05 15:58:42]    ffff83024d8a7ef8 ffff82c4802d8180 00000000ffffffff ffff82c4802d8000
(XEN) [2012-09-05 15:58:42]    ffff83024d8a7f18 ffffffffffffffff ffff83024d8a7ef8 ffff82c480125e31
(XEN) [2012-09-05 15:58:42]    0000000000000246 ffff8300afd07000 ffffffff81ece5d8 0000000000000000
(XEN) [2012-09-05 15:58:42]    0000000000000000 0000000000000000 ffff83024d8a7f08 ffff82c480125e68
(XEN) [2012-09-05 15:58:42]    00007cfdb27580c7 ffff82c480222f06 0000000000000000 ffffffff81e13880
(XEN) [2012-09-05 15:58:42]    0000000000000000 ffff88001d3f00d8 ffffffff81e01ce8 ffff88001fc0b100
(XEN) [2012-09-05 15:58:42]    0000000000000202 0000000000000000 0000000000000001 0000000000000000
(XEN) [2012-09-05 15:58:42]    0000000000000000 ffffffff810011aa ffff88001eb40000 00000000deadbeef
(XEN) [2012-09-05 15:58:42]    00000000deadbeef 0000010000000000 ffffffff810011aa 000000000000e033
(XEN) [2012-09-05 15:58:42]    0000000000000202 ffffffff81e01cb0 000000000000e02b 000053fd0000beef
(XEN) [2012-09-05 15:58:42]    800000000000beef 740000000000beef 000000000018beef 000053fe00000003
(XEN) [2012-09-05 15:58:42]    ffff8300a52d9000 0000003dcd5a8680 000000000018e0c9
(XEN) [2012-09-05 15:58:42] Xen call trace:
(XEN) [2012-09-05 15:58:42]    [<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:58:42]    [<ffff82c480124a70>] schedule+0x666/0x675
(XEN) [2012-09-05 15:58:42]    [<ffff82c480125e31>] __do_softirq+0xa4/0xb5
(XEN) [2012-09-05 15:58:42]    [<ffff82c480125e68>] do_softirq+0x26/0x28

(XEN) [2012-09-05 15:58:42]
(XEN) [2012-09-05 15:58:42] traps.c:3159: show_execution_state(guest_cpu_user_regs()):
(XEN) [2012-09-05 15:58:42] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:58:42] CPU: 3
(XEN) [2012-09-05 15:58:42] RIP: e033:[<ffffffff810011aa>]
(XEN) [2012-09-05 15:58:42] RFLAGS: 0000000000000202 EM: 1 CONTEXT: pv guest

(XEN) [2012-09-05 15:58:42] rax: 0000000000000000   rbx: ffff88001fc0b100   rcx: ffffffff810011aa
(XEN) [2012-09-05 15:58:42] rdx: ffff88001eb40000   rsi: 00000000deadbeef   rdi: 00000000deadbeef
(XEN) [2012-09-05 15:58:42] rbp: ffffffff81e01ce8   rsp: ffffffff81e01cb0   r8:  0000000000000000
(XEN) [2012-09-05 15:58:42] r9:  0000000000000001   r10: 0000000000000000   r11: 0000000000000202
(XEN) [2012-09-05 15:58:42] r12: ffff88001d3f00d8   r13: 0000000000000000   r14: ffffffff81e13880
(XEN) [2012-09-05 15:58:42] r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:58:42] cr3: 0000000068144000   cr2: 00000000f76ad934
(XEN) [2012-09-05 15:58:42] ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) [2012-09-05 15:58:42] Guest stack trace from rsp=ffffffff81e01cb0:
(XEN) [2012-09-05 15:58:42]    0000000000000000 0000000000000001 ffffffff81004942 ffffffff81e13420
(XEN) [2012-09-05 15:58:42]    ffff88001eb40000 0000000000000000 ffffffff81e13880 ffffffff81e01d08
(XEN) [2012-09-05 15:58:42]    ffffffff81003941 ffff88001eb40000 ffffffff81e13420 ffffffff81e01d68
(XEN) [2012-09-05 15:58:42]    ffffffff8100b850 ffffffff81e13420 0000000000000001 0000000000000063
(XEN) [2012-09-05 15:58:42]    ffff88001fc10a80 ffffffff81e01d78 ffff88001fc12e80 0000000000000000
(XEN) [2012-09-05 15:58:42]    ffff88001ccd4900 0000000000000082 ffffffff810f0040 ffffffff81e13420
(XEN) [2012-09-05 15:58:42]    ffffffff817fa2f5 ffffffff81e01ec8 0000000000000216 ffff88001fc0e698
(XEN) [2012-09-05 15:58:42]    0000000000000001 ffffffff81e13420 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:58:42]    ffffffff81e00010 0000000000012e80 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:58:42]    0000000000012e80 ffff88001ead2080 ffffffff81e13420 ffff88001fc0e8a0
(XEN) [2012-09-05 15:58:42]    0000000000000000 ffffffff81e01e98 ffffffff8108b381 0000000000000000
(XEN) [2012-09-05 15:58:42]    ffffffff810ab221 0000000181e01e28 0000000000000000 0000000081e01e48
(XEN) [2012-09-05 15:58:42]    0000000000000070 000000001fc0e8a0 000000000000e680 0000000000000000
(XEN) [2012-09-05 15:58:42]    ffffffff81e13420 ffffffff810a86fc 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:58:42]    0000000000000000 ffffffff81e01e98 ffffffff810acb78 ffff88001fc0e8a0
(XEN) [2012-09-05 15:58:42]    0000005c95a3945e ffffffff81e01ea8 ffffffff81e00010 ffffffff81ece5d8
(XEN) [2012-09-05 15:58:42]    ffffffff81f420c0 0000000000000000 0000000000000000 ffffffff81e01ed8
(XEN) [2012-09-05 15:58:42]    ffffffff817fa814 ffffffff81e01ef8 ffffffff81016456 0000000000000002
(XEN) [2012-09-05 15:58:42]    ffffffff81f39920 ffffffff81e01f28 ffffffff817d5b8c ffffffff817d5ad0
(XEN) [2012-09-05 15:58:42]    ffff880000001000 ffffffff81e01f28 0000000000000000 ffffffff81e01f78

(XEN) [2012-09-05 15:58:55] traps.c:3156: GPF (0060): ffff82c48015c9fe -> ffff82c480224b83 (XEN) [2012-09-05 15:58:55] traps.c:3157: show_execution_state(regs):
(XEN) [2012-09-05 15:58:55] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:58:55] CPU: 3
(XEN) [2012-09-05 15:58:55] RIP: e008:[<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:58:55] RFLAGS: 0000000000210202 CONTEXT: hypervisor

(XEN) [2012-09-05 15:58:55] rax: 0000000000000001   rbx: ffff8300a52d9000   rcx: 0000000000000001
(XEN) [2012-09-05 15:58:55] rdx: 0000000000000063   rsi: 0000000000000001   rdi: 00000000000001ae
(XEN) [2012-09-05 15:58:55] rbp: ffff83024d8a7e28   rsp: ffff83024d8a7d88   r8:  0000000000000006
(XEN) [2012-09-05 15:58:55] r9:  ffff83024d8aa060   r10: ffff8300afd1b060   r11: 0000008883a9e835
(XEN) [2012-09-05 15:58:55] r12: ffff8300a5a72000   r13: 0000000000000003   r14: 0000000000000003
(XEN) [2012-09-05 15:58:55] r15: ffff83024d8aa048   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:58:55] cr3: 0000000080957000   cr2: 00000000b7381000
(XEN) [2012-09-05 15:58:55] ds: 0000   es: 0000   fs: 0000   gs: 0063   ss: 0000   cs: e008
(XEN) [2012-09-05 15:58:55] Xen stack trace from rsp=ffff83024d8a7d88:
(XEN) [2012-09-05 15:58:55]    00000000000000ab ffff82f600cb6a20 0000001ea5694000 0000000000000000
(XEN) [2012-09-05 15:58:55]    ffff830065b51060 ffff83024d8aa060 ffff83024d8a7e18 ffff82c4801805be
(XEN) [2012-09-05 15:58:55]    00000000000009aa 000001cf59c67a7a 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:58:55]    0000000000000000 0000000000000000 ffff83024d8a7e28 ffff8300a5a72000
(XEN) [2012-09-05 15:58:55]    ffff8300a52d9000 000000888381bf56 0000000000000003 ffff83024d8aa048
(XEN) [2012-09-05 15:58:55]    ffff83024d8a7eb8 ffff82c480124a70 00ff83024d8a7e68 ffff83024d8aa040
(XEN) [2012-09-05 15:58:55]    000000034d8a7e68 000000888381bf56 ffff83024d8a7e78 ffff82c4801be388
(XEN) [2012-09-05 15:58:55]    ffff8300a52d9000 0000000001c9c380 ffff83024d8a7e00 ffff82c4801b870d
(XEN) [2012-09-05 15:58:55]    ffff8300a5a72000 ffff82c4802d8180 00000000ffffffff ffff82c4802d8000
(XEN) [2012-09-05 15:58:55]    ffff83024d8a7f18 ffffffffffffffff ffff83024d8a7ef8 ffff82c480125e31
(XEN) [2012-09-05 15:58:55]    ffff83024d8a7ed8 ffff8300a5a72000 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:58:55]    0000000000000000 0000000000000000 ffff83024d8a7f08 ffff82c480125e68
(XEN) [2012-09-05 15:58:55]    00000000de0a1f8a ffff82c4801cb5d2 0000000000000000 ffffffff81e13880
(XEN) [2012-09-05 15:58:55]    0000000000000000 ffff88000b9c00d8 ffffffff81e01ce8 ffff88001fc0b100
(XEN) [2012-09-05 15:58:55]    0000000000200202 0000000000000000 0000000000000001 0000000000000000
(XEN) [2012-09-05 15:58:55]    0000000000000000 ffffffff810011aa ffff88001eb41040 00000000deadbeef
(XEN) [2012-09-05 15:58:55]    00000000deadbeef 0000010000000000 ffffffff810011aa 000000000000e033
(XEN) [2012-09-05 15:58:55]    0000000000200202 ffffffff81e01cb0 000000000000e02b 000053fd0000beef
(XEN) [2012-09-05 15:58:55]    800000000000beef 740000000000beef 000000000018beef 000053fe00000003
(XEN) [2012-09-05 15:58:55]    ffff8300a52d9000 0000003dcd5a8680 000000000018e0c9
(XEN) [2012-09-05 15:58:55] Xen call trace:
(XEN) [2012-09-05 15:58:55]    [<ffff82c48015c9fe>] context_switch+0x394/0xeeb
(XEN) [2012-09-05 15:58:55]    [<ffff82c480124a70>] schedule+0x666/0x675
(XEN) [2012-09-05 15:58:55]    [<ffff82c480125e31>] __do_softirq+0xa4/0xb5
(XEN) [2012-09-05 15:58:55]    [<ffff82c480125e68>] do_softirq+0x26/0x28

(XEN) [2012-09-05 15:58:55]
(XEN) [2012-09-05 15:58:55] traps.c:3159: show_execution_state(guest_cpu_user_regs()):
(XEN) [2012-09-05 15:58:55] ----[ Xen-4.2.0-rc4-pre x86_64 debug=y Not tainted ]----
(XEN) [2012-09-05 15:58:55] CPU: 3
(XEN) [2012-09-05 15:58:55] RIP: e033:[<ffffffff810011aa>]
(XEN) [2012-09-05 15:58:55] RFLAGS: 0000000000200202 EM: 1 CONTEXT: pv guest

(XEN) [2012-09-05 15:58:55] rax: 0000000000000000   rbx: ffff88001fc0b100   rcx: ffffffff810011aa
(XEN) [2012-09-05 15:58:55] rdx: ffff88001eb41040   rsi: 00000000deadbeef   rdi: 00000000deadbeef
(XEN) [2012-09-05 15:58:55] rbp: ffffffff81e01ce8   rsp: ffffffff81e01cb0   r8:  0000000000000000
(XEN) [2012-09-05 15:58:55] r9:  0000000000000001   r10: 0000000000000000   r11: 0000000000200202
(XEN) [2012-09-05 15:58:55] r12: ffff88000b9c00d8   r13: 0000000000000000   r14: ffffffff81e13880
(XEN) [2012-09-05 15:58:55] r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) [2012-09-05 15:58:55] cr3: 0000000080957000   cr2: 000000000c26c02c
(XEN) [2012-09-05 15:58:55] ds: 0000   es: 0000   fs: 0000   gs: 0063   ss: e02b   cs: e033
(XEN) [2012-09-05 15:58:55] Guest stack trace from rsp=ffffffff81e01cb0:
(XEN) [2012-09-05 15:58:55]    0000000000000000 0000000000000001 ffffffff81004942 ffffffff81e13420
(XEN) [2012-09-05 15:58:55]    ffff88001eb41040 0000000000000000 ffffffff81e13880 ffffffff81e01d08
(XEN) [2012-09-05 15:58:55]    ffffffff81003941 ffff88001eb41040 ffffffff81e13420 ffffffff81e01d68
(XEN) [2012-09-05 15:58:55]    ffffffff8100b850 ffffffff81e13420 0000000000000001 0000000000000063
(XEN) [2012-09-05 15:58:55]    ffff88001fc10a80 ffffffff81e01d78 ffff88001fc12e80 0000000000000000
(XEN) [2012-09-05 15:58:55]    ffff88001ccd5f80 0000000000000082 ffffffff810f0040 ffffffff81e13420
(XEN) [2012-09-05 15:58:55]    ffffffff817fa2f5 ffffffff81e01ec8 0000000000000216 ffff88001fc0e698
(XEN) [2012-09-05 15:58:55]    0000000000000001 ffffffff81e13420 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:58:55]    ffffffff81e00010 0000000000012e80 0000000000012e80 ffffffff81e01fd8
(XEN) [2012-09-05 15:58:55]    0000000000012e80 ffff88001ead2080 ffffffff81e13420 ffff88001fc0e8a0
(XEN) [2012-09-05 15:58:55]    0000000000000000 ffffffff81e01e98 ffffffff8108b381 0000000000000001
(XEN) [2012-09-05 15:58:55]    ffffffff810ab221 0000000181e01e28 0000000000000000 0000000081e01e48
(XEN) [2012-09-05 15:58:55]    0000000000000070 000000001fc0e8a0 000000000000e680 0000000000000000
(XEN) [2012-09-05 15:58:55]    ffffffff81e13420 ffffffff810a86fc 0000000000000000 0000000000000000
(XEN) [2012-09-05 15:58:55]    0000000000000000 ffffffff81e01e98 ffffffff810acb78 ffff88001fc0e8a0
(XEN) [2012-09-05 15:58:55]    0000005fa4a00876 ffffffff81e01ea8 ffffffff81e00010 ffffffff81ece5d8
(XEN) [2012-09-05 15:58:55]    ffffffff81f420c0 0000000000000000 0000000000000000 ffffffff81e01ed8
(XEN) [2012-09-05 15:58:55]    ffffffff817fa814 ffffffff81e01ef8 ffffffff81016456 0000000000000002
(XEN) [2012-09-05 15:58:55]    ffffffff81f39920 ffffffff81e01f28 ffffffff817d5b8c ffffffff817d5ad0
(XEN) [2012-09-05 15:58:55]    ffff880000001000 ffffffff81e01f28 0000000000000000 ffffffff81e01f78

(XEN) [2012-09-05 19:11:36] grant_table.c:254:d0 Increased maptrack size to 2 frames
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

Wei Wang

author

2012-09-06 13:32 UTC #2 lore raw

Quoted 13 lines · Sander Eikelenboom

Quoted 8 lines · you
Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang<[email protected]>

Quoted 6 lines

I have applied the patch and the flags seem to differ between the faults:
AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020

OK, so they are not interrupt requests. I guess further information from your system would be helpful to debug this issue:
1) xl info
2) xl list
3) lscpi -vvv (NOTE: not in dom0 but in your guest)
4) cat /proc/iomem (in both dom0 and your hvm guest)

* I would also like to know the symptoms of device 0x0700 when IO_PF happened. Did it stop working?

(BTW: I copied a few options from your boot cmd line and it worked with my RD890 system

dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,no-sharept

* so, what OEM board you have?)

Also from your log, these lines looks very strange:

(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639 (XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637 (XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0 (XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8300 (XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8340 (XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8380 (XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f83c0

* they are just followed by the IO PAGE fault. Do you know where are they from? Your video card driver maybe?

Thanks,
Wei

Quoted 6 lines

Complete xl dmesg and lspci -vvvknn attached.
Thx
--
Sander

Sander Eikelenboom

2012-09-06 13:50 UTC #3 lore raw

Quoted 21 lines · you

Quoted 13 lines · Sander Eikelenboom
Quoted 8 lines · you
Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang<[email protected]>
Quoted 6 lines
I have applied the patch and the flags seem to differ between the faults:
AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020

Quoted 6 lines

OK, so they are not interrupt requests. I guess further information from your system would be helpful to debug this issue:
1) xl info
2) xl list
3) lscpi -vvv (NOTE: not in dom0 but in your guest)
4) cat /proc/iomem (in both dom0 and your hvm guest)

dom14 is not a HVM guest,it's a PV guest.

I will try to make a complete package, and try with one pv domain only where the devices are being passed through just to simplify the setup.

Quoted 2 lines

* I would also like to know the symptoms of device 0x0700 when IO_PF happened. Did it stop working?

Yes it stops working, the video capture just freezes, but the driver doesn't bail out. For the USB controller (0x0a06) it starts to give errors for usbdev_open in the guest.

Quoted 8 lines

(BTW: I copied a few options from your boot cmd line and it worked with my RD890 system
dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,no-sharept
* so, what OEM board you have?)

MSI 890FXA-GD70

Quoted 57 lines

Also from your log, these lines looks very strange:
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8300
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8340
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8380
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f83c0
* they are just followed by the IO PAGE fault. Do you know where are they from? Your video card driver maybe?
From a HVM domain with a old (3.0.3) kernel, but the faults also occur without this domain being started.
Thanks,
Wei
Quoted 6 lines
Complete xl dmesg and lspci -vvvknn attached.
Thx
--
Sander

Wei Wang

author

2012-09-06 15:03 UTC #4 lore raw

Quoted 24 lines · Sander Eikelenboom

Quoted 20 lines · you
Quoted 19 lines · Sander Eikelenboom
Quoted 8 lines · you
Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang<[email protected]>
I have applied the patch and the flags seem to differ between the faults:
AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020

Quoted 8 lines

Quoted 6 lines
OK, so they are not interrupt requests. I guess further information from your system would be helpful to debug this issue:
1) xl info
2) xl list
3) lscpi -vvv (NOTE: not in dom0 but in your guest)
4) cat /proc/iomem (in both dom0 and your hvm guest)
dom14 is not a HVM guest,it's a PV guest.

Ah, I see. PV guest is quite different than hvm, it does use p2m tables as io page tables. So no-sharept option does not work in this case. PV guests always use separated io page tables. There might be some incorrect mappings on the page tables. I will check this on my side.

Thanks,
Wei

Quoted 82 lines

I will try to make a complete package, and try with one pv domain only where the devices are being passed through just to simplify the setup.
Quoted 2 lines
* I would also like to know the symptoms of device 0x0700 when IO_PF happened. Did it stop working?
Yes it stops working, the video capture just freezes, but the driver doesn't bail out. For the USB controller (0x0a06) it starts to give errors for usbdev_open in the guest.
Quoted 8 lines
(BTW: I copied a few options from your boot cmd line and it worked with my RD890 system
dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,no-sharept
* so, what OEM board you have?)
MSI 890FXA-GD70
Quoted 41 lines
Also from your log, these lines looks very strange:
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8300
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8340
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8380
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f83c0
Quoted 2 lines
* they are just followed by the IO PAGE fault. Do you know where are they from? Your video card driver maybe?
From a HVM domain with a old (3.0.3) kernel, but the faults also occur without this domain being started.
Quoted 10 lines
Thanks,
Wei
Quoted 6 lines
Complete xl dmesg and lspci -vvvknn attached.
Thx
--
Sander

Sander Eikelenboom

2012-09-06 15:08 UTC #5 lore raw

Quoted 34 lines · you

Quoted 24 lines · Sander Eikelenboom
Quoted 20 lines · you
Quoted 19 lines · Sander Eikelenboom
Quoted 8 lines · you
Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang<[email protected]>
I have applied the patch and the flags seem to differ between the faults:
AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020
Quoted 8 lines
Quoted 6 lines
OK, so they are not interrupt requests. I guess further information from your system would be helpful to debug this issue:
1) xl info
2) xl list
3) lscpi -vvv (NOTE: not in dom0 but in your guest)
4) cat /proc/iomem (in both dom0 and your hvm guest)
dom14 is not a HVM guest,it's a PV guest.

Quoted 7 lines

Ah, I see. PV guest is quite different than hvm, it does use p2m tables as io page tables. So no-sharept option does not work in this case. PV guests always use separated io page tables. There might be some incorrect mappings on the page tables. I will check this on my side.
Thanks,
Wei

In that case it's perhaps mysteriously semi related to a p2m bug in kernels > 3.4 which freezes guests on my intel box. Though guests start fine on the amd box with kernels > 3.4, perhaps it does give issues for iommu if those are tied somehow.

Quoted 82 lines

Quoted 82 lines
I will try to make a complete package, and try with one pv domain only where the devices are being passed through just to simplify the setup.
Quoted 2 lines
* I would also like to know the symptoms of device 0x0700 when IO_PF happened. Did it stop working?
Yes it stops working, the video capture just freezes, but the driver doesn't bail out. For the USB controller (0x0a06) it starts to give errors for usbdev_open in the guest.
Quoted 8 lines
(BTW: I copied a few options from your boot cmd line and it worked with my RD890 system
dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,no-sharept
* so, what OEM board you have?)
MSI 890FXA-GD70
Quoted 41 lines
Also from your log, these lines looks very strange:
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8300
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8340
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8380
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f83c0
Quoted 2 lines
* they are just followed by the IO PAGE fault. Do you know where are they from? Your video card driver maybe?
From a HVM domain with a old (3.0.3) kernel, but the faults also occur without this domain being started.
Quoted 10 lines
Thanks,
Wei
Quoted 6 lines
Complete xl dmesg and lspci -vvvknn attached.
Thx
--
Sander

Sander Eikelenboom

2012-09-07 07:32 UTC #6 lore raw

In reply to Wei Wang

Quoted 32 lines · you

Quoted 31 lines · Sander Eikelenboom
Quoted 27 lines · you
Quoted 13 lines · Sander Eikelenboom
Quoted 8 lines · you
Hi Jan,
Attached patch dumps io page fault flags. The flags show the reason of the fault and tell us if this is an unmapped interrupt fault or a DMA fault.
Thanks,
Wei
Signed-off-by Wei Wang<[email protected]>
Quoted 6 lines
I have applied the patch and the flags seem to differ between the faults:
AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000
(XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0, flags = 0x000 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d339e0, flags = 0x020 (XEN) [2012-09-05 20:54:16] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa8d33a40, flags = 0x020
OK, so they are not interrupt requests. I guess further information from your system would be helpful to debug this issue:
1) xl info
2) xl list
3) lscpi -vvv (NOTE: not in dom0 but in your guest)
4) cat /proc/iomem (in both dom0 and your hvm guest)

Quoted 6 lines

Quoted 1 line
dom14 is not a HVM guest,it's a PV guest.
Ah, I see. PV guest is quite different than hvm, it does use p2m tables as io page tables. So no-sharept option does not work in this case. PV guests always use separated io page tables. There might be some incorrect mappings on the page tables. I will check this on my side.

I have reverted the machine to xen-4.1.4-pre (changeset 23353) and kept everything else the same. I haven't seen any IO PAGE FAULTS after that.

I did spot some differences in the output from lspci between xen 4.1 and 4.2, related to MSI enabled or not for the IOMMU device. Have attached the xl/xm dmesg and lspci from booting with both versions.

lspci:

00:00.2 Generic system peripheral [0806]: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Capabilities: [40] Secure device <?>
4.1: Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit+
4.2: Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

Although it seems enabled, shouldn't the IRQ number used be much higher than 10 for MSI interrupts ?

There is another difference in the bridge device that's in front of the 0a:00.6 device that faults before the kernel is even booted.

00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
4.1: Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
4.2: Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9f00000-f9ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
4.1: Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
4.2: Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+

serveerstertje:~# lspci -t
-[0000:00]-+-00.0
           +-00.2
           +-02.0-[0b]----00.0
           +-03.0-[0a]--+-00.0
           |            +-00.1
           |            +-00.2
           |            +-00.3
           |            +-00.4
           |            +-00.5
           |            +-00.6
           |            \-00.7
           +-05.0-[09]----00.0
           +-06.0-[08]----00.0
           +-0a.0-[07]----00.0
           +-0b.0-[06]--+-00.0
           |            \-00.1
           +-0c.0-[05]----00.0
           +-0d.0-[04]--+-00.0
           |            +-00.1
           |            +-00.2
           |            +-00.3
           |            +-00.4
           |            +-00.5
           |            +-00.6
           |            \-00.7
           +-11.0
           +-12.0
           +-12.2
           +-13.0
           +-13.2
           +-14.0
           +-14.3
           +-14.4-[03]----06.0
           +-14.5
           +-15.0-[02]--
           +-16.0
           +-16.2
           +-18.0
           +-18.1
           +-18.2
           +-18.3
           \-18.4

Quoted 85 lines

Thanks,
Wei
Quoted 82 lines
I will try to make a complete package, and try with one pv domain only where the devices are being passed through just to simplify the setup.
Quoted 2 lines
* I would also like to know the symptoms of device 0x0700 when IO_PF happened. Did it stop working?
Yes it stops working, the video capture just freezes, but the driver doesn't bail out. For the USB controller (0x0a06) it starts to give errors for usbdev_open in the guest.
Quoted 8 lines
(BTW: I copied a few options from your boot cmd line and it worked with my RD890 system
dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,no-sharept
* so, what OEM board you have?)
MSI 890FXA-GD70
Quoted 41 lines
Also from your log, these lines looks very strange:
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd5, mfn=0xa4a11
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd7, mfn=0xa4a0f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xd9, mfn=0xa4a0d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdb, mfn=0xa4a0b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdd, mfn=0xa4a09
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xdf, mfn=0xa4a07
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe1, mfn=0xa4a05
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe3, mfn=0xa4a03
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe5, mfn=0xa4a01
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe7, mfn=0xa463f
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xe9, mfn=0xa463d
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xeb, mfn=0xa463b
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xed, mfn=0xa4639
(XEN) [2012-09-04 15:54:35] hvm.c:2435:d15 guest attempted write to read-only memory page. gfn=0xef, mfn=0xa4637
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0a06, fault address = 0xc2c2c2c0
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8300
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8340
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f8380
(XEN) [2012-09-04 16:13:56] AMD-Vi: IO_PAGE_FAULT: domain = 14, device id = 0x0700, fault address = 0xa90f83c0
Quoted 2 lines
* they are just followed by the IO PAGE fault. Do you know where are they from? Your video card driver maybe?
From a HVM domain with a old (3.0.3) kernel, but the faults also occur without this domain being started.
Quoted 10 lines
Thanks,
Wei
Quoted 6 lines
Complete xl dmesg and lspci -vvvknn attached.
Thx
--
Sander

00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
Subsystem: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Address: 00000000 Data: 0000

00:00.2 Generic system peripheral [0806]: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: ATI Technologies Inc RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4151
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9f00000-f9ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4159
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9e00000-f9efffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4161
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9d00000-f9dfffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4169
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9a00000-f9bfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4171
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9900000-f99fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 31.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4179
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:5a20] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9600000-f97fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 14.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4181
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9500000-f95fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4189
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 120
Region 0: I/O ports at 7000 [size=8]
Region 1: I/O ports at 6000 [size=4]
Region 2: I/O ports at 5000 [size=8]
Region 3: I/O ports at 3000 [size=4]
Region 4: I/O ports at 2000 [size=16]
Region 5: Memory at f93ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0200c Data: 41b9
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ahci

00:12.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f93fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f93ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f93fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f93ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 00 [Normal decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-