phy: Generalise "auto-negotiation done" function, move generic PHY code to phy_device.c
Subsystems (6)
PATCH v2 1/1 phy: Generalise "auto-negotiation done" function, move generic PHY code to phy_device.c
From: Alexander Sverdlin <[email protected]>
Generalise "auto-negotiation done" function, move generic PHY code to phy_device.c
Not all devices have "auto-negotiation done" bit at the place, as expected by phy_aneg_done() in phy.c. Example of such device is Marvell 88E61xx Ethernet switch which could be controlled by Linux PHY layer, if struct phy_driver had abstraction for above function. So move hardware-dependent implementation details for "generic" PHY to phy_device.c, and modify all PHY drivers to use new field. Now phy.c contains only high-level state-machine functionality, leaving hardware-layer to different drivers.
V2 is patch against net-next, as one additional PHY driver was added.
--- Documentation/networking/phy.txt | 9 +++++---- drivers/net/phy/amd.c | 1 + drivers/net/phy/bcm63xx.c | 2 ++ drivers/net/phy/bcm87xx.c | 2 ++ drivers/net/phy/broadcom.c | 11 +++++++++++ drivers/net/phy/cicada.c | 2 ++ drivers/net/phy/davicom.c | 3 +++ drivers/net/phy/dp83640.c | 1 + drivers/net/phy/et1011c.c | 1 + drivers/net/phy/icplus.c | 3 +++ drivers/net/phy/lxt.c | 3 +++ drivers/net/phy/marvell.c | 9 +++++++++ drivers/net/phy/micrel.c | 5 +++++ drivers/net/phy/national.c | 1 + drivers/net/phy/phy.c | 22 ++-------------------- drivers/net/phy/phy_device.c | 18 ++++++++++++++++++ drivers/net/phy/qsemi.c | 1 + drivers/net/phy/realtek.c | 1 + drivers/net/phy/smsc.c | 5 +++++ drivers/net/phy/ste10Xp.c | 2 ++ drivers/net/phy/vitesse.c | 2 ++ include/linux/phy.h | 12 ++++++++++-- 22 files changed, 90 insertions(+), 26 deletions(-)
Documentation/networking/phy.txt +5 -4
@@ -1,7 +1,7 @@ ------- PHY Abstraction Layer -(Updated 2008-04-08) +(Updated 2012-09-06) Purpose
@@ -257,15 +257,16 @@ Writing a PHY driver probe: Does any setup needed by the driver suspend/resume: power management config_aneg: Changes the speed/duplex/negotiation settings + aneg_done: Reads current auto-negotiation state read_status: Reads the current speed/duplex/negotiation settings ack_interrupt: Clear a pending interrupt config_intr: Enable or disable interrupts remove: Does any driver take-down - Of these, only config_aneg and read_status are required to be + Of these, only config_aneg, aneg_done and read_status are required to be assigned by the driver code. The rest are optional. Also, it is - preferred to use the generic phy driver's versions of these two - functions if at all possible: genphy_read_status and + preferred to use the generic phy driver's versions of these three + functions if at all possible: genphy_read_status, genphy_aneg_done and genphy_config_aneg. If this is not possible, it is likely that you only need to perform some actions before and after invoking these functions, and so your functions will wrap the generic
drivers/net/phy/amd.c +1 -0
@@ -69,6 +69,7 @@ static struct phy_driver am79c_driver = { .flags = PHY_HAS_INTERRUPT, .config_init = am79c_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = am79c_ack_interrupt, .config_intr = am79c_config_intr,
drivers/net/phy/bcm63xx.c +2 -0
@@ -81,6 +81,7 @@ static struct phy_driver bcm63xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm63xx_ack_interrupt, .config_intr = bcm63xx_config_intr,
@@ -94,6 +95,7 @@ static struct phy_driver bcm63xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm63xx_ack_interrupt, .config_intr = bcm63xx_config_intr,
drivers/net/phy/bcm87xx.c +2 -0
@@ -195,6 +195,7 @@ static struct phy_driver bcm87xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr,
@@ -208,6 +209,7 @@ static struct phy_driver bcm87xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr,
drivers/net/phy/broadcom.c +11 -0
@@ -692,6 +692,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -705,6 +706,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -718,6 +720,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -731,6 +734,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -744,6 +748,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -757,6 +762,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = bcm5482_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -770,6 +776,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -783,6 +790,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -796,6 +804,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr,
@@ -809,6 +818,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = brcm_fet_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = brcm_fet_ack_interrupt, .config_intr = brcm_fet_config_intr,
@@ -822,6 +832,7 @@ static struct phy_driver broadcom_drivers[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = brcm_fet_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = brcm_fet_ack_interrupt, .config_intr = brcm_fet_config_intr,
drivers/net/phy/cicada.c +2 -0
@@ -111,6 +111,7 @@ static struct phy_driver cis820x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &cis820x_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &cis820x_ack_interrupt, .config_intr = &cis820x_config_intr,
@@ -123,6 +124,7 @@ static struct phy_driver cis820x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &cis820x_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &cis820x_ack_interrupt, .config_intr = &cis820x_config_intr,
drivers/net/phy/davicom.c +3 -0
@@ -152,6 +152,7 @@ static struct phy_driver dm91xx_driver[] = { .features = PHY_BASIC_FEATURES, .config_init = dm9161_config_init, .config_aneg = dm9161_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .driver = { .owner = THIS_MODULE,}, }, {
@@ -161,6 +162,7 @@ static struct phy_driver dm91xx_driver[] = { .features = PHY_BASIC_FEATURES, .config_init = dm9161_config_init, .config_aneg = dm9161_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .driver = { .owner = THIS_MODULE,}, }, {
@@ -170,6 +172,7 @@ static struct phy_driver dm91xx_driver[] = { .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = dm9161_ack_interrupt, .config_intr = dm9161_config_intr,
drivers/net/phy/dp83640.c +1 -0
@@ -1257,6 +1257,7 @@ static struct phy_driver dp83640_driver = { .probe = dp83640_probe, .remove = dp83640_remove, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ts_info = dp83640_ts_info, .hwtstamp = dp83640_hwtstamp,
drivers/net/phy/et1011c.c +1 -0
@@ -94,6 +94,7 @@ static struct phy_driver et1011c_driver = { .features = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full), .flags = PHY_POLL, .config_aneg = et1011c_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = et1011c_read_status, .driver = { .owner = THIS_MODULE,}, };
drivers/net/phy/icplus.c +3 -0
@@ -210,6 +210,7 @@ static struct phy_driver icplus_driver[] = { .features = PHY_BASIC_FEATURES, .config_init = &ip175c_config_init, .config_aneg = &ip175c_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &ip175c_read_status, .suspend = genphy_suspend, .resume = genphy_resume,
@@ -222,6 +223,7 @@ static struct phy_driver icplus_driver[] = { SUPPORTED_Asym_Pause, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume,
@@ -236,6 +238,7 @@ static struct phy_driver icplus_driver[] = { .ack_interrupt = ip101a_g_ack_interrupt, .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume,
drivers/net/phy/lxt.c +3 -0
@@ -158,6 +158,7 @@ static struct phy_driver lxt97x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = lxt970_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = lxt970_ack_interrupt, .config_intr = lxt970_config_intr,
@@ -169,6 +170,7 @@ static struct phy_driver lxt97x_driver[] = { .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = lxt971_ack_interrupt, .config_intr = lxt971_config_intr,
@@ -181,6 +183,7 @@ static struct phy_driver lxt97x_driver[] = { .flags = 0, .probe = lxt973_probe, .config_aneg = lxt973_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .driver = { .owner = THIS_MODULE,}, } };
drivers/net/phy/marvell.c +9 -0
@@ -713,6 +713,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &marvell_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -726,6 +727,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -739,6 +741,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -752,6 +755,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1118_config_init, .config_aneg = &m88e1118_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -764,6 +768,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &m88e1121_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -777,6 +782,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &m88e1318_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -791,6 +797,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1145_config_init, .config_aneg = &marvell_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -804,6 +811,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1149_config_init, .config_aneg = &m88e1118_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
@@ -817,6 +825,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
drivers/net/phy/micrel.c +5 -0
@@ -123,6 +123,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ks8737_config_intr,
@@ -136,6 +137,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr,
@@ -149,6 +151,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = ks8051_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr,
@@ -161,6 +164,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr,
@@ -174,6 +178,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ksz9021_config_intr,
drivers/net/phy/national.c +1 -0
@@ -137,6 +137,7 @@ static struct phy_driver dp83865_driver = { .flags = PHY_HAS_INTERRUPT, .config_init = ns_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = ns_ack_interrupt, .config_intr = ns_config_intr,
drivers/net/phy/phy.c +2 -20
@@ -95,24 +95,6 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)return err; } - -/** -* phy_aneg_done - return auto-negotiation status -* @phydev: target phy_device struct -* -* Description: Reads the status register and returns 0 either if -* auto-negotiation is incomplete, or if there was an error. -* Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. -*/ -static inline int phy_aneg_done (struct phy_device *phydev) -{ -int retval; - - retval =phy_read (phydev,MII_BMSR ); - -return (retval <0 ) ? retval : (retval &BMSR_ANEGCOMPLETE ); -} -/* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ struct phy_setting {
@@ -807,7 +789,7 @@ void phy_state_machine(struct work_struct *work)/* Check if negotiation is done. Break * if there's an error */ - err =phy_aneg_done (phydev); + err = phydev->drv->aneg_done (phydev);if (err <0 )break ;
@@ -921,7 +903,7 @@ void phy_state_machine(struct work_struct *work)break ;if (AUTONEG_ENABLE == phydev->autoneg) { - err =phy_aneg_done (phydev); + err = phydev->drv->aneg_done (phydev);if (err <0 )break ;
drivers/net/phy/phy_device.c +18 -0
@@ -785,6 +785,23 @@ int genphy_config_aneg(struct phy_device *phydev)EXPORT_SYMBOL (genphy_config_aneg);/** +* genphy_aneg_done - return auto-negotiation status +* @phydev: target phy_device struct +* +* Description: Reads the status register and returns positive value if +* auto-negotiation is complete, 0 if incomplete and negative on failure. +*/ +int genphy_aneg_done (struct phy_device *phydev) +{ +int retval; + + retval =phy_read (phydev,MII_BMSR ); + +return (retval <0 ) ? retval : (retval &BMSR_ANEGCOMPLETE ); +} +EXPORT_SYMBOL (genphy_aneg_done); + +/** * genphy_update_link - update link status in @phydev * @phydev: target phy_device struct *
@@ -1117,6 +1134,7 @@ static struct phy_driver genphy_driver = { .config_init = genphy_config_init, .features = 0, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume,
drivers/net/phy/qsemi.c +1 -0
@@ -119,6 +119,7 @@ static struct phy_driver qs6612_driver = { .flags = PHY_HAS_INTERRUPT, .config_init = qs6612_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = qs6612_ack_interrupt, .config_intr = qs6612_config_intr,
drivers/net/phy/realtek.c +1 -0
@@ -57,6 +57,7 @@ static struct phy_driver rtl821x_driver = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &rtl821x_ack_interrupt, .config_intr = &rtl821x_config_intr,
drivers/net/phy/smsc.c +5 -0
@@ -73,6 +73,7 @@ static struct phy_driver smsc_phy_driver[] = {/* basic functions */ .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .config_init = smsc_phy_config_init,
@@ -95,6 +96,7 @@ static struct phy_driver smsc_phy_driver[] = {/* basic functions */ .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .config_init = smsc_phy_config_init,
@@ -117,6 +119,7 @@ static struct phy_driver smsc_phy_driver[] = {/* basic functions */ .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .config_init = smsc_phy_config_init,
@@ -139,6 +142,7 @@ static struct phy_driver smsc_phy_driver[] = {/* basic functions */ .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .config_init = lan911x_config_init,
@@ -161,6 +165,7 @@ static struct phy_driver smsc_phy_driver[] = {/* basic functions */ .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .config_init = smsc_phy_config_init,
drivers/net/phy/ste10Xp.c +2 -0
@@ -90,6 +90,7 @@ static struct phy_driver ste10xp_pdriver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = ste10Xp_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = ste10Xp_ack_interrupt, .config_intr = ste10Xp_config_intr,
@@ -104,6 +105,7 @@ static struct phy_driver ste10xp_pdriver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = ste10Xp_config_init, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .ack_interrupt = ste10Xp_ack_interrupt, .config_intr = ste10Xp_config_intr,
drivers/net/phy/vitesse.c +2 -0
@@ -160,6 +160,7 @@ static struct phy_driver vsc82xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &vsc824x_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr,
@@ -173,6 +174,7 @@ static struct phy_driver vsc82xx_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_init = &vsc8221_config_init, .config_aneg = &genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr,
include/linux/phy.h +10 -2
@@ -369,8 +369,8 @@ struct phy_device {* flags: A bitfield defining certain other features this PHY * supports (like interrupts) * -* The drivers must implement config_aneg and read_status. All -* other functions are optional. Note that none of these +* The drivers must implement config_aneg, aneg_done and read_status. +* All other functions are optional. Note that none of these * functions should be called from interrupt time. The goal is * for the bus read/write functions to be able to block when the * bus transaction is happening, and be freed up by an interrupt
@@ -408,6 +408,13 @@ struct phy_driver {*/ int (*config_aneg)(struct phy_device *phydev); +/* +* Reads auto-negotiation status. Returns positive value if +* auto-negotiation is complete, 0 if incomplete and negative +* value on error +*/ +int (*aneg_done)(struct phy_device *phydev); +/* Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev);
@@ -528,6 +535,7 @@ static inline int phy_read_status(struct phy_device *phydev) {int genphy_restart_aneg (struct phy_device *phydev);int genphy_config_aneg (struct phy_device *phydev); +int genphy_aneg_done (struct phy_device *phydev);int genphy_update_link (struct phy_device *phydev);int genphy_read_status (struct phy_device *phydev);int genphy_suspend (struct phy_device *phydev);