mx6: Remove lowlevel_init.S
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Fabio,
Quoted 15 lines · Fabio Estevam
lowlevel_init.Sis not used on mx6, so remove the file and the associated calls.Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/cpu/armv7/mx6/Makefile | 1 - arch/arm/cpu/armv7/mx6/lowlevel_init.S | 25 ------------------------- arch/arm/cpu/armv7/start.S | 24 ------------------------ 3 files changed, 50 deletions(-)delete mode 100644
arch/arm/cpu/armv7/mx6/lowlevel_init.Sarch/arm/cpu/armv7/mx6/Makefile +0
-0
arch/arm/cpu/armv7/mx6/Makefile include $(TOPDIR)/config.mk · line 33
Quoted 7 lines
arch/arm/cpu/armv7/mx6/Makefile +0
-1@@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS = soc.o clock.o -SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
SOBJS may be removed from above ones.
Quoted 64 lines
arch/arm/cpu/armv7/mx6/lowlevel_init.S deleted +0
-25@@ -1,25 +0,0 @@ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -.section ".text.init", "x" - -#include <linux/linkage.h> - -ENTRY(lowlevel_init) - mov pc, lr -ENDPROC(lowlevel_init)arch/arm/cpu/armv7/start.S +0
-17@@ -152,7 +152,6 @@ reset: /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_cp15 - bl cpu_init_crit #endif /* Set stackpointer in internal RAM to call board_init_f */@@ -353,29 +352,6 @@ ENTRY(cpu_init_cp15) mov pc, lr @ back to my caller ENDPROC(cpu_init_cp15) -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -/************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - *************************************************************************/ -ENTRY(cpu_init_crit) - /* - * Jump to board specific initialization... - * The Mask ROM will have already initialized - * basic memory. Go here to bump up clock rate and handle - * wake up conditions. - */
arch/arm/cpu/armv7/start.S ENTRY(cpu_init_cp15) · line 357
Quoted 10 lines
arch/arm/cpu/armv7/start.S +0
-7- mov ip, lr @ persevere link reg across call - bl lowlevel_init @ go setup pll,mux,memory - mov lr, ip @ restore link - mov pc, lr @ back to my caller -ENDPROC(cpu_init_crit) -#endif - #ifndef CONFIG_SPL_BUILD /* *************************************************************************
Regards,
Ashok