Skip to contentSkip to conversation

Can't connect to MIDI output of Edirol UA-1000

DISCUSSION Colin Fletcher 3 participants 8 messages Sep 18, 2012 – Nov 15, 2012

lore
Share & tools
lore
#0 lore raw

Hello all,

I hope this is the right place to report this and ask for help: if not, I'd be glad of a pointers to any more appropriate forum.

I've just recently noticed that connections to the MIDI output of my Edirol UA-1000 fail when using the snd_ua101 driver in recent kernels.

Although the port is listed, connections to it fail from all the software I've tried: qjackctl, a2jmidid and aconnect all fail to connect.

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create: snd_seq_connect_to() for 20:0 failed with error -5"; and qjackctl reports no error but refuses to make the connection.

I've observed the problem in stable kernels 3.0.39 and 3.4.11; it works as expected when booted into a 2.6.32 kernel, where the snd_usb_audio driver is used for the UA-1000. Other USB MIDI devices appear to work fine with the newer kernels.

Incidentally, I also noticed that the 'Control' MIDI in & out of the UA-1000 no longer appear when using snd_ua101, but I don't think this is related, since changing the values of midi_ep.out_cables and midi_ep.in_cables to 3 in the ua101_probe() function in sound/usb/misc/ua101.c brings the control in & out back, but I'm still unable to connect the outputs.

Any help, suggestions, patches or requests for more details gratefully received!

Thank you,

Colin Fletcher.

#1 lore raw
Quoted 6 lines · Colin Fletcher

I've just recently noticed that connections to the MIDI output of my Edirol UA-1000 fail when using the snd_ua101 driver in recent kernels.

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create: snd_seq_connect_to() for 20:0 failed with error -5"

Are there any error messages in the system log?

Regards,
Clemens

#2 lore raw
Quoted 11 lines · Clemens Ladisch
Quoted 7 lines · Colin Fletcher

I've just recently noticed that connections to the MIDI output of my Edirol UA-1000 fail when using the snd_ua101 driver in recent kernels.

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create:
snd_seq_connect_to() for 20:0 failed with error -5"

Are there any error messages in the system log?

Hi Clemens,

Not a squeak in/var/log/syslog or /var/log/messages when I try to connect using aconnect, no. Can you think of anywhere else I might look?

Colin.

#3 lore raw
Quoted 13 lines · Colin Fletcher
Quoted 11 lines · Clemens Ladisch
Quoted 7 lines · Colin Fletcher

I've just recently noticed that connections to the MIDI output of my Edirol UA-1000 fail when using the snd_ua101 driver in recent kernels.

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create:
snd_seq_connect_to() for 20:0 failed with error -5"

Are there any error messages in the system log?

Quoted 7 lines

Hi Clemens,

Not a squeak in/var/log/syslog or /var/log/messages when I try to connect using aconnect, no. Can you think of anywhere else I might look?

Colin.

Just a little more info: 'strace aconnect 20:0 20:0' shows that the SNDRV_SEQ_IOCTL_SUBSCRIBE_PORT ioctl on "/dev/snd/seq" is the thing which is giving the EIO error.

Colin.

#7 lore raw
In reply to Colin Fletcher
Quoted 4 lines · Colin Fletcher <colin.m.fletcher <at> googlemail.com> writes:

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create: snd_seq_connect_to() for 20:0 failed with error -5"; and qjackctl reports no error but refuses to make the connection.

I just want to note that the problem is exactly the same with the Edirol UA-101 (uses the same driver) and linux-3.5.3

#4 lore raw
In reply to Colin Fletcher
Quoted 20 lines · Colin Fletcher
Quoted 19 lines · Colin Fletcher
Quoted 11 lines · Clemens Ladisch
Quoted 7 lines · Colin Fletcher

I've just recently noticed that connections to the MIDI output of my Edirol UA-1000 fail when using the snd_ua101 driver in recent kernels.

aconnect simply reports "Connection failed (Input/output error)"; a2jmidid -e says "ERROR: a2j_port_create:
snd_seq_connect_to() for 20:0 failed with error -5"

Are there any error messages in the system log?

Hi Clemens,

Not a squeak in/var/log/syslog or /var/log/messages when I try to connect using aconnect, no. Can you think of anywhere else I might look?

Quoted 6 lines
Quoted 1 line

Colin.

Just a little more info: 'strace aconnect 20:0 20:0' shows that the SNDRV_SEQ_IOCTL_SUBSCRIBE_PORT ioctl on "/dev/snd/seq" is the thing which is giving the EIO error.

Hello Clemens,

I wondered whether what you said about a problem with the US-122 MIDI out [1] was the same problem as mine. with the UA-1000, so I tried kernels 2.6.38.8 and 2.6.39.

With kernel 2.6.38.8, aconnect can connect to the MIDI out of my UA-1000; with 2.6.39, it fails, so it seems likely that it is the same bug.

Would a bisection between these kernels be useful, or do you have an idea already of what might have caused this regression?

Colin Fletcher.

[1] http://www.spinics.net/linux/fedora/alsa-user/msg11499.html

#5 lore raw
Quoted 3 lines · Colin Fletcher

With kernel 2.6.38.8, aconnect can connect to the MIDI out of my UA-1000; with 2.6.39, it fails, so it seems likely that it is the same bug.

It's the same bug, caused by this patch: http://git.kernel.org/linus/88a8516a2128

Fix coming soon.

Regards,
Clemens

#6 lore raw
Quoted 8 lines · Clemens Ladisch
Quoted 3 lines · Colin Fletcher

With kernel 2.6.38.8, aconnect can connect to the MIDI out of my UA-1000; with 2.6.39, it fails, so it seems likely that it is the same bug.

It's the same bug, caused by this patch: http://git.kernel.org/linus/88a8516a2128

Fix coming soon.

It's great to hear you know the cause of this. Thank you very much!

Armed with that information, I've found that replacing '#ifdef CONFIG_PM' with '#if 0' and commenting out calls to usb_autopm_{get|put}_interface() inside sound/usb/ gets me a working MIDI out on kernel 3.4.18 for now, which makes me happy.

If there's a proper patch I can usefully test, I'd be very glad to know about it.

Thank you.

Colin.