Staging: winbond: Changed c99 comments to c89 comments

diff -uprN a/drivers/staging/winbond/wb35tx_s.h b/drivers/staging/winbond/wb35tx_s.h
@@ -3,36 +3,32 @@
 
 #include "mds_s.h"
 
-//==================
-// IS89C35 Tx related definition
-//==================
-#define TX_INTERFACE			0	// Interface 1
-#define TX_PIPE					3	// endpoint 4
-#define TX_INTERRUPT			1	// endpoint 2
-#define MAX_INTERRUPT_LENGTH	64	// It must be 64 for EP2 hardware
+/* IS89C35 Tx related definition */
+#define TX_INTERFACE			0	/* Interface 1 */
+#define TX_PIPE					3	/* Endpoint 4 */
+#define TX_INTERRUPT			1	/* Endpoint 2 */
+#define MAX_INTERRUPT_LENGTH	64	/* It must be 64 for EP2 hardware */
 
 
 
-//==================
-// Internal variable for module
-//==================
+/* Internal variable for module */
 
 
 struct wb35_tx {
-	// For Tx buffer
+	/* For Tx buffer */
 	u8	TxBuffer[ MAX_USB_TX_BUFFER_NUMBER ][ MAX_USB_TX_BUFFER ];
 
-	// For Interrupt pipe
+	/* For Interrupt pipe */
 	u8	EP2_buf[MAX_INTERRUPT_LENGTH];
 
-	atomic_t	TxResultCount;// For thread control of EP2 931130.4.m
-	atomic_t	TxFireCounter;// For thread control of EP4 931130.4.n
+	atomic_t	TxResultCount; /* For thread control of EP2 931130.4.m */
+	atomic_t	TxFireCounter; /* For thread control of EP4 931130.4.n */
 	u32			ByteTransfer;
 
-	u32	    TxSendIndex;// The next index of Mds array to be sent
-	u32	    EP2vm_state; // for EP2vm state
-	u32	    EP4vm_state; // for EP4vm state
-	u32	    tx_halt; // Stopping VM
+	u32	    TxSendIndex; /* The next index of Mds array to be sent */
+	u32	    EP2vm_state; /* for EP2vm state */
+	u32	    EP4vm_state; /* for EP4vm state */
+	u32	    tx_halt; /* Stopping VM */
 
 	struct urb *				Tx4Urb;
 	struct urb *				Tx2Urb;

@@ -40,8 +36,8 @@ struct wb35_tx {
 	int		EP2VM_status;
 	int		EP4VM_status;
 
-	u32	TxFillCount; // 20060928
-	u32	TxTimer; // 20060928 Add if sending packet is greater than 13
+	u32	TxFillCount; /* 20060928 */
+	u32	TxTimer; /* 20060928 Add if sending packet is greater than 13 */
 };
 
 #endif