post-buil script in chrooted
Hello,
Few ask in finalise target:
1- to do root task, i can only use permission: target in each packages..........
CAN i use a "root script" in chrooted mode? ROOTFS_POST_BUILD_SCRIPT is not executed chrooted in the target.
2-
why rootfs targets are generated 2 times? (in my case: rootfs.tar and
rootfs.ubifs)
Generate 1 time and then generate tar and UBIFS is quicker.....so why?
"Thanks for this nice buildroot tool."
David.
Dear David Bonnin,
Quoted 3 lines · David Bonnin
Few ask in finalise target:
1- to do root task, i can only use permission: target in each packages..........
Not sure I understand this part.
Quoted 2 lines
CAN i use a "root script" in chrooted mode?
ROOTFS_POST_BUILD_SCRIPTis not executed chrooted in the target.
No because it doesn't make sense. Buildroot is used in many cases for cross-compilation, so the development machine is x86 or x86_64 and the target filesystem contain ARM, PowerPC or MIPS binaries. So chrooting into it is not possible (unless we use Qemu or something like that, but it's not the idea of Buildroot, we want to do cross-compilation).
Quoted 4 lines
2-
why rootfs targets are generated 2 times? (in my case: rootfs.tar
and rootfs.ubifs)
Generate 1 time and then generate tar and UBIFS is quicker.....so why?
Well, this is exactly what Buildroot is doing:
1) It generates your root filesystem in output/target
2) At the end of the build it uses the contents of output/target to create the different root filesystem images you requested. So if you requested a tarball image and an UBIFS image, it is going to call tar inside fakeroot to create the tarball image using the contents of output/target, and then mkfs.ubifs inside fakeroot to create the UBIFS image using the contents of output/target.
Hope this helps,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
Hi David,
Quoted 10 lines · Thomas Petazzoni
Dear David Bonnin,
Quoted 3 lines · David Bonnin
Few ask in finalise target:
1- to do root task, i can only use permission: target in each packages..........Not sure I understand this part.
Quoted 8 lines
Quoted 2 lines
CAN i use a "root script" in chrooted mode?
ROOTFS_POST_BUILD_SCRIPTis not executed chrooted in the target.No because it doesn't make sense. Buildroot is used in many cases for cross-compilation, so the development machine is x86 or
x86_64and the target filesystem contain ARM, PowerPC or MIPS binaries. So chrooting into it is not possible (unless we use Qemu or something like that, but it's not the idea of Buildroot, we want to do cross-compilation).
Maybe you can explain why you think chroot would be necessary. What are you trying to accomplish?
If you need to add device nodes for example, there are other ways to do it without needing to be root.
Quoted 29 lines
Quoted 5 lines
2-
why rootfs targets are generated 2 times? (in my case: rootfs.tar
and rootfs.ubifs)
Generate 1 time and then generate tar and UBIFS is quicker.....so why?Well, this is exactly what Buildroot is doing:
1) It generates your root filesystem in output/target
2) At the end of the build it uses the contents of output/target to create the different root filesystem images you requested. So if you requested a tarball image and an UBIFS image, it is going to call tar inside fakeroot to create the tarball image using the contents of output/target, and then mkfs.ubifs inside fakeroot to create the UBIFS image using the contents of output/target.
Hope this helps,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Quoted 20 lines · Thomas De Schampheleire
Quoted 10 lines · Thomas Petazzoni
Quoted 10 lines
Dear David Bonnin,
Quoted 3 lines · David Bonnin
Quoted 3 lines
Few ask in finalise target:
1- to do root task, i can only use permission: target in each packages..........Not sure I understand this part.
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
CAN i use a "root script" in chrooted mode?
ROOTFS_POST_BUILD_SCRIPTis not executed chrooted in the target.No because it doesn't make sense. Buildroot is used in many cases for cross-compilation, so the development machine is x86 or
x86_64and the target filesystem contain ARM, PowerPC or MIPS binaries. So chrooting into it is not possible (unless we use Qemu or something like that, but it's not the idea of Buildroot, we want to do cross-compilation).
Quoted 4 lines
Maybe you can explain why you think chroot would be necessary. What are you trying to accomplish?
If you need to add device nodes for example, there are other ways to do it without needing to be root.
I think he means fakeroot, not chroot...
I can think of some things for which you may want to execute a fakeroot
script:
- to set xattrs or acls (though I'm not sure if libfakeroot supports them);
- to run some other 'filesystem generation' program, e.g. rsync or nfsd (we would create a new rootfs type for that, but Joe R. User may have a hard time doing that).
But most likely, what David needs is covered by BR2_ROOTFS_DEVICE_TABLE.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Hello,
yes, sorry , i mean , i was looking for a post-build script for my board in a fakeroot environnement.
customize package is deprecated.
in board/me/Myproject/rootfs-adds/root/
i want to cp files of root user.
So i need to use custom skeletonfs or use customize package.
Is there a better way to do it?
thanks.
customize package
Le 12/10/2012 20:52, Arnout Vandecappelle a ?crit :
Quoted 47 lines · Thomas De Schampheleire
Quoted 20 lines
Quoted 18 lines · Thomas Petazzoni
Quoted 8 lines
Dear David Bonnin,
Quoted 3 lines · David Bonnin
Quoted 3 lines
Few ask in finalise target:
1- to do root task, i can only use permission: target in each packages..........Quoted 6 lines
Not sure I understand this part.
Quoted 2 lines
Quoted 2 lines
CAN i use a "root script" in chrooted mode?
ROOTFS_POST_BUILD_SCRIPTis not executed chrooted in the target.No because it doesn't make sense. Buildroot is used in many cases
for
Quoted 1 line
cross-compilation, so the development machine is x86 or
x86_64and the
Quoted 1 line
target filesystem contain ARM, PowerPC or MIPS binaries. So
Quoted 8 lines
Quoted 4 lines
chrooting
Quoted 1 line
into it is not possible (unless we use Qemu or something like
that, but
Quoted 1 line
it's not the idea of Buildroot, we want to do cross-compilation).
Maybe you can explain why you think chroot would be necessary. What are you trying to accomplish?
If you need to add device nodes for example, there are other ways to do it without needing to be root.I think he means fakeroot, not chroot...
I can think of some things for which you may want to execute a fakeroot
script:- to set xattrs or acls (though I'm not sure if libfakeroot supports them);
- to run some other 'filesystem generation' program, e.g. rsync or nfsd (we would create a new rootfs type for that, but Joe R. User may have a hard time doing that).But most likely, what David needs is covered by
BR2_ROOTFS_DEVICE_TABLE.Regards,
Arnout
Quoted 8 lines · David Bonnin
Hello,
yes, sorry , i mean , i was looking for a post-build script for my board in a fakeroot environnement. customize package is deprecated.
in board/me/Myproject/rootfs-adds/root/
i want to cp files of root user.
Do you mean, files that are owned by root and are not readable by you?
That won't be possible.
Or do you mean, files that should be owned by root in the target? In that
case, you can just copy them in the post-build script - buildroot will make everything owned by root.
Quoted 1 line
So i need to use custom skeletonfs or use customize package.
Neither of these will do anything that the post-build script cannot do.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Hello,
Exactly, i want to create few users on the target, and copy files for each user, like ftpUser , httpdUser, userMyApp, userMyBackupApp. I doesn't want to copy files only for root.
My apps(2) on the target doesn't run under root privileveges, and have theirs own default files/directory.
Now, i understand BR, i did it statically, with copy files by post-build script and permissions target in customize package ( deprecated). My next step, will be put the default directory/files in root folder, and at target board starting create/copy files for my users, in goal to remove customize package and my own Skeleton.
Thinking of starting, It seemed implicit that we can execute a personnal script in a fakeroot script for modify the target dir before make images.
My project works now, and looking back BR is a good choice(better than TI-SDK, and easy to understand).
Le 17/10/2012 22:32, Arnout Vandecappelle a ?crit :
Quoted 27 lines · David Bonnin
Quoted 9 lines
Hello,
yes, sorry , i mean , i was looking for a post-build script for my board in a fakeroot environnement.
customize package is deprecated.in board/me/Myproject/rootfs-adds/root/
i want to cp files of root user.
Do you mean, files that are owned by root and are not readable by you?
That won't be possible.Or do you mean, files that should be owned by root in the target? In
that
case, you can just copy them in the post-build script - buildroot will make
everything owned by root.Quoted 1 line
So i need to use custom skeletonfs or use customize package.
Neither of these will do anything that the post-build script cannot do.
Regards,
Arnout
Quoted 5 lines · David Bonnin
Exactly, i want to create few users on the target, and copy files for each user, like ftpUser , httpdUser, userMyApp, userMyBackupApp.
I doesn't want to copy files only for root.My apps(2) on the target doesn't run under root privileveges, and have theirs own default files/directory.
If you want to set file owners and permissions on the target, you should use
the device table (BR2_ROOTFS_DEVICE_TABLE). Look at target/generic/device_table.txt for an example.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F