Skip to contentSkip to conversation

Question: Status of marvell's PATA 88SE6101 controller on intel boards

DISCUSSION Levitsky Maxim 2 participants 5 messages Feb 6, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I am going to buy a intel DG965RYCK motherboard. The board looks ok to me , but I found that it contains marvell's 88SE6101 PATA controller , and I need to use PATA.

I also noticed that 2.6.20 adds experimentally support for that chip. But driver says that it enables it via 'legacy mode'

I will be glad to hear whenever full support is planned or not.

And as last thing I want to ask you whenever current support is usable, that is can I use DMA , can I use DVD as at least reader for CD/DVD , and even better can I burn disks with it ( although I can live without it)

Your truly,
Maxim Levitsky

Maxim Levitsky

____________________________________________________________________________________
Don't get soaked. Take a quick peak at the forecast with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather

#1 lore raw
Quoted 2 lines

I also noticed that 2.6.20 adds experimentally support for that chip. But driver says that it enables it via 'legacy mode'

Yes.

Quoted 1 line

I will be glad to hear whenever full support is planned or not.

At the moment it is not, but it may be a neccessary side effect of full support for the later SATA capable controllers in native SATA mode. In which case you might get it one day.

The legacy mode is itself as good as most typical PATA controllers and better than some.

Quoted 4 lines

And as last thing I want to ask you whenever current support is usable, that is can I use DMA , can I use DVD as at least reader for CD/DVD , and even better can I burn disks with it ( although I can live without it)

The legacy mode has full DMA support. What you don't get is the ability to queue multiple commands so the hardware can fire off a new command as the first completes and to have the hardware do some of the general poking around for us.

Alan

#2 lore raw
Quoted 5 lines · --- Alan
Quoted 2 lines

I also noticed that 2.6.20 adds experimentally support for that chip. But driver says that it enables it via 'legacy mode'

Yes.

Quoted 8 lines
Quoted 1 line

I will be glad to hear whenever full support is planned or not.

At the moment it is not, but it may be a neccessary side effect of full support for the later SATA capable controllers in native SATA mode. In which case you might get it one day.

The legacy mode is itself as good as most typical PATA controllers and better than some.

And I don't need anything better , just normal recording on my PATA DVD writer.
I now have very old system and still DVD recording works fine , so I don't need anything more than that

Quoted 9 lines
Quoted 4 lines

And as last thing I want to ask you whenever current support is usable, that is can I use DMA , can I use DVD as at least reader for CD/DVD , and even better can I burn disks with it ( although I can live without it)

The legacy mode has full DMA support. What you don't get is the ability to queue multiple commands so the hardware can fire off a new command as the first completes and to have the hardware do some of the general poking around for us.

So that means that DVD-writer will work too ?

Quoted 3 lines

Alan

Thank you very much, I didn't expect so quick response.

Thank you, kernel developers for so great kernel.
Maxim Levitsky

____________________________________________________________________________________
Looking for earth-friendly autos?
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
http://autos.yahoo.com/green_center/

#3 lore raw
Quoted 1 line · On Tue, 6 Feb 2007 10:07:50 -0800 (PST) Levitsky Maxim…

So that means that DVD-writer will work too ?

It should do

Alan

#4 lore raw
Quoted 8 lines · --- Alan
Quoted 1 line · On Tue, 6 Feb 2007 10:07:50 -0800 (PST) Levitsky Maxim…

So that means that DVD-writer will work too ?

It should do

Alan

Thank you very much
Maxim Levitsky

____________________________________________________________________________________
Have a burning question?
Go to www.Answers.yahoo.com and get answers from real people who know.