11s mesh mode on openwrt + batman-adv
hello friends
come again disturb the lords
- I have a network with openrando opewrt customized by me, here in Brazil as jah reported in other emails, but this network is growing and am having some difficulties that I can not solve it alone ...
my ath9k driver operates today with 802.11s (mesh) on a virtual interface and another interface with 802.11g + n for wifi connections ..
but I'm from the beginning in 2011 fighting with routing in the network ..
AP: (config)
Attached ...
eg not know where I really run batman-adv or even whether he really works well with HWMP ...
help me ...
Quoted 7 lines · On Friday 09 November 2012 10:41:36 Flavio Leonel wrote:
hello friends
come again disturb the lords- I have a network with openrando opewrt customized by me, here in Brazil as jah reported in other emails, but this network is growing and am having some difficulties that I can not solve it alone ...
Quoted 7 lines
my ath9k driver operates today with 802.11s (mesh) on a virtual interface and another interface with 802.11g + n for wifi connections ..
but I'm from the beginning in 2011 fighting with routing in the network ..
AP: (config)
Attached ...
There is nothing attached.
Quoted 2 lines
eg not know where I really run batman-adv or even whether he really works well with HWMP ...
First: IEEE 802.11s (HWMP) and batman-adv are complete different things. Please don't use batman-adv over HWMP links. And you can check whether you are using batman-adv on an interface by checking the output of "batctl if". It should show you all interfaces which are attached at (and therefore known by) batman-adv (at least for bat0).
Kind regards,
Sven