: Please pull u-boot-imx

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 34275d70fec6cc369a931090ebb686bc213bb80d:

arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)

are available in the git repository at:

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1d4fd0dc3b45de7b7a706285845ef5b527422014:

mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
+0100)

----------------------------------------------------------------
Beno?t Th?baudeau (16):
mx31: Move EHCI definitions to ehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: Fix OC_DIS usage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missing OC_DIS for i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Make board_ehci_hcd_init() optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Mark lowlevel_init board-specific code

Fabio Estevam (13):
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi: mxc_spi: Fix handling of chip select
spi: mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: Configure CONFIG_BOOTDELAY to one second
mx53loco: Configure CONFIG_BOOTDELAY to one second
mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
mx51evk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Configure CONFIG_BOOTDELAY to one second
mx31pdk: Configure CONFIG_BOOTDELAY to one second
mx35pdk: Configure CONFIG_BOOTDELAY to one second

Marek Vasut (2):
mx28: Fix typo in POWER_MINPWR_VBG_OFF
mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET

 arch/arm/cpu/armv7/mx5/clock.c             |    4 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S     |    2 +-
 arch/arm/cpu/armv7/mx6/clock.c             |    2 +
 arch/arm/include/asm/arch-mx25/imx-regs.h  |    1 +
 arch/arm/include/asm/arch-mx31/imx-regs.h  |   27 +---
 arch/arm/include/asm/arch-mx35/imx-regs.h  |    2 +
 arch/arm/include/asm/arch-mx5/mx5x_pins.h  |    6 +-
 arch/arm/include/asm/arch-mxs/regs-power.h |    4 +-
 board/freescale/mx35pdk/lowlevel_init.S    |    4 +
 board/freescale/mx35pdk/mx35pdk.c          |   21 +++
 doc/README.imx5                            |    5 +
 drivers/spi/mxc_spi.c                      |    9 +-
 drivers/usb/host/ehci-mx5.c                |  146 ++++++++++++++----
 drivers/usb/host/ehci-mx6.c                |    5 +
 drivers/usb/host/ehci-mxc.c                |  225
+++++++++++++++++++++-------
 include/configs/mx25pdk.h                  |    2 +-
 include/configs/mx28evk.h                  |    2 +-
 include/configs/mx31pdk.h                  |    2 +-
 include/configs/mx35pdk.h                  |   16 +-
 include/configs/mx51_efikamx.h             |    1 +
 include/configs/mx51evk.h                  |    3 +-
 include/configs/mx53loco.h                 |    2 +-
 include/configs/mx6qsabre_common.h         |    2 +-
 include/configs/mx6qsabrelite.h            |    2 +-
 include/configs/vision2.h                  |    1 +
 include/configs/zmx25.h                    |    6 +-
 include/usb/ehci-fsl.h                     |   28 +++-
 27 files changed, 401 insertions(+), 129 deletions(-)

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Hi Stefano,

Applied to u-boot-arm/master, thanks!

Amicalement,

Albert.