Skip to contentSkip to conversation

mac80211: re-organize the rx rate calculation logic

PATCH New Saravana 1 participant 1 message Nov 28, 2012 mac80211

lore
Share & tools
lore

Saravana

author
#0 lore raw

PATCH 1/1 mac80211: re-organize the rx rate calculation logic

currently the logic to calculate the rx rate is accessible only in the cfg.c.The rx rate calculation might be needed by other files(modules) of mac80211(possibly debugfs).
So grouping the rx rate calculation logic to a separate function which can be accessed from other files. This change will make the rx rate calculation implementation similar to tx rate.

Signed-off-by Saravana <[email protected]>
---
 net/mac80211/cfg.c      |   60 ++++++++++++++++++++++++++--------------------
 net/mac80211/sta_info.h |    2 +
 2 files changed, 36 insertions(+), 26 deletions(-)
net/mac80211/cfg.c +34 -26
index 5d30e5f..3459443 100644
@@ -398,6 +398,39 @@ void sta_set_rate_info_tx(struct sta_info *sta,
 		rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
 }
 
+void sta_set_rate_info_rx(struct sta_info *sta,
+			struct rate_info *rinfo)
+{
+	rinfo->flags = 0;
+	if (sta->last_rx_rate_flag & RX_FLAG_HT) {
+		rinfo->flags |= RATE_INFO_FLAGS_MCS;
+		rinfo->mcs = sta->last_rx_rate_idx;
+	} else if (sta->last_rx_rate_flag & RX_FLAG_VHT) {
+		rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS;
+		rinfo->nss = sta->last_rx_rate_vht_nss;
+		rinfo->mcs = sta->last_rx_rate_idx;
+	} else {
+		struct ieee80211_supported_band *sband;
+
+		sband = sta->local->hw.wiphy->bands[
+				ieee80211_get_sdata_band(sta->sdata)];
+		rinfo->legacy =
+			sband->bitrates[sta->last_rx_rate_idx].bitrate;
+	}
+
+	if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
+		rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+	if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
+		rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
+	if (sta->last_rx_rate_flag & RX_FLAG_80MHZ)
+		rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
+	if (sta->last_rx_rate_flag & RX_FLAG_80P80MHZ)
+		rinfo->flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH;
+	if (sta->last_rx_rate_flag & RX_FLAG_160MHZ)
+		rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
+
+}
+
 static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;

@@ -445,33 +478,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 
 	sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate);
 
-	sinfo->rxrate.flags = 0;
-	if (sta->last_rx_rate_flag & RX_FLAG_HT) {
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_MCS;
-		sinfo->rxrate.mcs = sta->last_rx_rate_idx;
-	} else if (sta->last_rx_rate_flag & RX_FLAG_VHT) {
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_VHT_MCS;
-		sinfo->rxrate.nss = sta->last_rx_rate_vht_nss;
-		sinfo->rxrate.mcs = sta->last_rx_rate_idx;
-	} else {
-		struct ieee80211_supported_band *sband;
-
-		sband = sta->local->hw.wiphy->bands[
-				ieee80211_get_sdata_band(sta->sdata)];
-		sinfo->rxrate.legacy =
-			sband->bitrates[sta->last_rx_rate_idx].bitrate;
-	}
+	sta_set_rate_info_rx(sta, &sinfo->rxrate);
 
-	if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
-	if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
-	if (sta->last_rx_rate_flag & RX_FLAG_80MHZ)
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
-	if (sta->last_rx_rate_flag & RX_FLAG_80P80MHZ)
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH;
-	if (sta->last_rx_rate_flag & RX_FLAG_160MHZ)
-		sinfo->rxrate.flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
 #ifdef CONFIG_MAC80211_MESH
net/mac80211/sta_info.h +2 -0
index 6835cea..fd69419 100644
@@ -552,6 +552,8 @@ int sta_info_flush(struct ieee80211_local *local,
 void sta_set_rate_info_tx(struct sta_info *sta,
 			  const struct ieee80211_tx_rate *rate,
 			  struct rate_info *rinfo);
+void sta_set_rate_info_rx(struct sta_info *sta,
+			struct rate_info *rinfo);
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time);