Skip to contentSkip to conversation

Front mic not working properly

pulseaudio-discuss Raymond Yau 1 participant 1 message Dec 18, 2012 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): CAN8cciad8ygjn0SOyB1_pQ5BqyQTKXGATeOqCu6WA2Pf3CKjWQ@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I'm totally stuck with a sound problem I fail to debug on my own.

My setup:
Asus P5Q Motherboard with Realtec ALC1200 soundchip. Stereo speakers

plugged in to the rear output and headphone speaker/mic combo plugged in to the front jacks. System: Ubuntu 12.10

Quoted 1 line
Quoted 1 line
Quoted 1 line

Desired behaviour: Sound is played back on headphones AND rear

speaker. Front mic should "just-work"

Asus P5Q specification

Realtek ALC1200, 8-channel High Definition Audio CODEC
- Support Jack-Detection, Multi-streaming, and Front Panel Jack-Retasking

Alt_playback is still not enabled to support multi streaming playback on realtec codecs

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Problem 2:
This is the biggest problem.
As soon as I plug in the front mic, Inside gnome-alsamixer the volume

for master, surround,center,lfe start to jump between on and off. Why is the Front mic jack controlling these values?

Do you mean BIOS did not setup pin default correctly after asus-p5q model was removed?

http://git.kernel.org/?p=linux/kernel/git/tiwai/sound.git;a=commitdiff;h=6fdfa361282a69fc9bfea4dd7d6303adc9e4d6df;hp=4586b2b583e9bb3df8cf5586469c2c19bd6b31d2

Quoted 1 line

How can I debug this behaviour?

Post the output of alsa-info.sh

Quoted 2 lines

I just want them to stay the same, if the mic is plugged in or not.

Quoted 1 line
Quoted 1 line

Inside the gnome volume settings, the output port starts to jump

between "Analog Output" and "Analog Headphones"

Quoted 2 lines
Quoted 2 lines

This look like problem in Jack detection of the headphone and Mic Jack

of front audio panel

Quoted 6 lines
Quoted 6 lines

alsamixer -c0

Does the playback switch change rapidly on and off in alsamixer ?

Do your computer chassis have a hda front audio panel and you connect

them to the front audio connector of the motherboard according to the user manual ?

Quoted 4 lines
Quoted 3 lines

Does it help if you disabled the automute switch ?

Thanks a lot. Your input helped me to at least work around the problem.

My chassis has a HDA and an AC97 connector. The HDA connector was plugged in and correctly configured in BIOS.

Quoted 1 line

I now use the AC97 connector (and changed the BIOS settings) and

everything is working properly.

Checking the front audio panel specification of your computer chassis

Setting front audio panel to AC97 in BIOS of Asus motherboard change the miscellaneous bit of pin default of front HP and Mic Jack (i.e. misc = NO_PRESENCE)

The alsa driver won't enable the unsolicited event on these nodes

Quoted 2 lines

Regarding your questions: Disabling automute didn't help. And yes, the

playback switch toggled rapidly.

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=261c2407401ca26fa17f05667ea68f51e12c5303

Try disable trigger sense by

codec->no_trigger_sense = 1;

Quoted 2 lines

One thing I didn't test: I mistakenly plugged the rear speaker into the

front channel jack (plugging the green connector into a green jack seemed so obvious). I don't know is this is the same channel as the headphone connector on the front panel...

Quoted 2 lines

In AC97 mode it doesn't matter if I use the front channel jack or the

rear channel jack (both at the rear of the computer) to connect my main speakers.
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel