Skip to contentSkip to conversation

megaraid_sas: problem with specific hardware only with kernel 3.2.5 and above

DISCUSSION Matthias Prager 1 participant 1 message Dec 19, 2012 SCSI

lore
Share & tools
lore
#0 lore raw

Hello everyone, hello Michal,

I can confirm and reproduce this issue on a different set of hardware:

Intel S1200BTLR Mainboard
LSI MegaRAID 9266-4i Raid-Controller

I haven't tried using a kernel older than 3.2.5 so far, but with kernels 3.2.24 and 3.5.0 I get the following dmesg output:

[    2.621164] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
[    2.621179] megasas: 0x1000:0x005b:0x1000:0x9269: bus 1:slot 0:func 0
[    2.621599] megasas: Waiting for FW to come to ready state
[    2.621601] megasas: FW in FAULT state!!

As a result I can't access any drives connected to the controller.

Tested Controller firmwares: 23.7.0-0031, 23.7.0-0035 and 23.9.0-0015 Tested Mainboard BIOSes: R0037 (BMC 1.14, FRUSDR 1.14)

I contacted Intel and LSI support a while ago. Intel shot me down by telling me this wasn't their problem. LSI at least tried to resolve the issue but thus far failed to do so.

Unfortunately I don't have access to the system on a day-to-day basis, but I will test eventual fixes as soon as I get the chance.

---
Matthias Prager