Skip to contentSkip to conversation

Raspberry Pi do_fetch failure

DISCUSSION ed nelson 5 participants 19 messages Jan 1, 2013 – Jan 16, 2013 4 messages not in the archive

lore
Share & tools
lore

ed nelson

author
#0 lore raw

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:bf909b267498dbab4d7695c26b0dce903ac8b6b0"
meta-raspberrypi = "master:305c5259e24eaa9fb285ca983dc4f9454743fa0c"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/ed/oe/poky-danny/rasperryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

Thanks

#1 lore raw
Quoted 28 lines · ed nelson

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:**bf909b267498dbab4d7695c26b0dce**903ac8b6b0"
meta-raspberrypi = "master:**305c5259e24eaa9fb285ca983dc4f9**454743fa0c"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL git://github.com/raspberrypi/**
linux.git;protocol=git;branch=**rpi-3.2.27<http://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27>, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/ed/oe/poky-danny/** rasperryPiBuild/downloads/**git2/github.com.raspberrypi.**linux.git'...

Quoted 9 lines

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL: 'git:// github.com/raspberrypi/**linux.git;protocol=git;branch=**rpi-3.2.27<http://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27>'. Unable to fetch URL from any source.

So this error hits again.

It's something related to github. I've seen this on other repos and solved it with a ticket to github - strangely I can't reproduce your issue now on my host. As i recall the clone would fail if "--quiet" was used. Can you confirm? Are you able to clone that repo manually? WIth "--quiet" too?

Andrei

#3 lore raw
In reply to a message not in the archive
Quoted 48 lines · ed nelson

On 01/01/2013 06:50 PM, Andrei Gherzan wrote:

Quoted 28 lines · ed nelson

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:bf909b267498dbab4d7695c26b0dce903ac8b6b0"
meta-raspberrypi = "master:305c5259e24eaa9fb285ca983dc4f9454743fa0c"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL git://
github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/ed/oe/poky-danny/rasperryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 9 lines

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL: 'git:// github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

So this error hits again.

It's something related to github. I've seen this on other repos and
solved it with a ticket to github - strangely I can't reproduce your issue now on my host. As i recall the clone would fail if "--quiet" was used. Can you confirm? Are you able to clone that repo manually? WIth "--quiet" too?

Quoted 7 lines

Andrei

When I manually try:

$ git clone --quiet git://github.com/raspberrypi/linux.git
The process hangs

Wait a while and check if this fails after a while.

Andrei

#5 lore raw
In reply to a message not in the archive

Please submit a bug / contact github with the problem you found. And if you are so kind, please keep me posted.

*Andrei Gherzan*
mobile +40.744.478.414 fax +40.31.816.28.12
Email: [email protected]
Email: [email protected]
Romania

Quoted 85 lines · ed nelson

On 01/02/2013 01:52 AM, Andrei Gherzan wrote:

Quoted 48 lines · ed nelson

On 01/01/2013 06:50 PM, Andrei Gherzan wrote:

Quoted 28 lines · ed nelson

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:bf909b267498dbab4d7695c26b0dce903ac8b6b0"
meta-raspberrypi = "master:305c5259e24eaa9fb285ca983dc4f9454743fa0c"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL git://
github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/ed/oe/poky-danny/rasperryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 9 lines

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL: 'git:// github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

So this error hits again.

It's something related to github. I've seen this on other repos and
solved it with a ticket to github - strangely I can't reproduce your issue now on my host. As i recall the clone would fail if "--quiet" was used. Can you confirm? Are you able to clone that repo manually? WIth "--quiet" too?

Quoted 7 lines

Andrei

When I manually try:

$ git clone --quiet git://github.com/raspberrypi/linux.git
The process hangs

Wait a while and check if this fails after a while.

Andrei

It failed the same as the build.

ed@ed-Aspire-5560:~/temp$ git clone --quiet git://
github.com/raspberrypi/linux.git

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

Any suggestions?

Thanks

#6 lore raw
In reply to ed nelson
Quoted 32 lines · ed nelson

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:bf909b267498dbab4d7695c26b0dce903ac8b6b0"
meta-raspberrypi = "master:305c5259e24eaa9fb285ca983dc4f9454743fa0c"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/ed/oe/poky-danny/rasperryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

Quoted 5 lines

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

Thanks

I'm rebuilding an RPi image from scratch here now for some testing and I see the same issue, which looks to be a GitHub hiccup.

I do have a cached download of the RPi linux GitHub repository from a previous build, which you're welcome to use if it'll help you move forward whilst GitHub has this issue.

I've tarred it up as github.com.raspberrypi.linux.git.tgz. You can extract this into the Yocto downloads directory and I believe it'll be picked up by the build tool, e.g.

cd /path/to/yoctoProject/raspberryPiBuild/downloads tar xzf /path/to/github.com.raspberrypi.linux.git.tgz

You should see it go into a "git2" folder in downloads.

It's currently uploading to a DropBox public link at

https://dl.dropbox.com/u/12130167/rpi/github.com.raspberrypi.linux.git.tgz

(It's around 620MB so it'll be about an hour before it's up. I'll probably leave it up there over the weekend but it may disappear next week!)

Cheers,

Alex

Quoted 5 lines

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#7 lore raw
Quoted 60 lines · Alex J Lennon
Quoted 17 lines · ed nelson

I am getting a do_fetch failure on raspberrypi kernel. Is anyone else having this problem?

Build Configuration:

BB_VERSION        = "1.16.0"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "raspberrypi"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3"
TUNE_FEATURES     = "armv6 vfp"
TARGET_FPU        = "vfp"

meta
meta-yocto
meta-yocto-bsp = "danny:bf909b267498dbab4d7695c26b0dce903ac8b6b0"
meta-raspberrypi = "master:305c5259e24eaa9fb285ca983dc4f9454743fa0c"

Quoted 10 lines

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository

'/home/ed/oe/poky-danny/rasperryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 10 lines

fatal: read error: Connection reset by peer
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

Thanks

I'm rebuilding an RPi image from scratch here now for some testing and I see the same issue, which looks to be a GitHub hiccup.

I do have a cached download of the RPi linux GitHub repository from a previous build, which you're welcome to use if it'll help you move forward whilst GitHub has this issue.

I've tarred it up as github.com.raspberrypi.linux.git.tgz. You can extract this into the Yocto downloads directory and I believe it'll be picked up by the build tool, e.g.

cd /path/to/yoctoProject/raspberryPiBuild/downloads tar xzf /path/to/github.com.raspberrypi.linux.git.tgz

You should see it go into a "git2" folder in downloads.

It's currently uploading to a DropBox public link at

https://dl.dropbox.com/u/12130167/rpi/github.com.raspberrypi.linux.git.tgz

Quoted 9 lines

(It's around 620MB so it'll be about an hour before it's up. I'll probably leave it up there over the weekend but it may disappear next week!)

Cheers,

Alex

Thank you Alex. Hope it will help Nelson.
ag

#9 lore raw
In reply to a message not in the archive
Quoted 6 lines

Alex

Thanks I was able to download and build core-image-sato

Having discussion with github but no real solution yet.

Hi Ed, I'm glad that was useful in moving you forward. I did some googling and this issue with GitHub does seem to pop up intermittently. My gut feeling is there's some kind of resource issue, perhaps related to compression on the server. Some of the comments do seem to suggest that disabling compression helps.

I do wonder if someone from the Yocto project is able to fork the RPi linux repo and mirror either the Git repo itself or an archive of that (and indeed if that's a good idea)?

Cheers,

Alex

#10 lore raw
Quoted 13 lines · Alex J Lennon
Quoted 6 lines

Alex

Thanks I was able to download and build core-image-sato

Having discussion with github but no real solution yet.

Hi Ed, I'm glad that was useful in moving you forward. I did some googling and this issue with GitHub does seem to pop up intermittently. My gut feeling is there's some kind of resource issue, perhaps related to compression on the server. Some of the comments do seem to suggest that disabling compression helps.

Quoted 3 lines

I do wonder if someone from the Yocto project is able to fork the RPi linux repo and mirror either the Git repo itself or an archive of that (and indeed if that's a good idea)?

is there a current diagnosis for this github fetching irritation? i
thought i'd take a shot at building for rpi and, like others, i failed to fetch the kernel from github:

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/rpjday/oe/builds/rpi/downloads/git2/github.com.raspberrypi.linux.git'...

fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'.
Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/rpjday/oe/builds/rpi/tmp-eglibc/work/armv6-vfp-oe-linux-gnueabi/linux-libc-headers-raspberrypi/3.2.27-r0/temp/log.do_fetch.1278
ERROR: Task 62 (/home/rpjday/oe/dist/layers/meta-raspberrypi/recipes-kernel/linux-libc-headers/linux-libc-headers-raspberrypi_3.2.27.bb, do_fetch) failed with exit code '1'

thoughts? i've tried a few times this morning, same result each
time.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#12 lore raw
Quoted 5 lines · Alex J Lennon
Quoted 3 lines · Robert P. J. Day

fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

Quoted 8 lines

fwiw there's a note here which relates to Cygwin:

http://stackoverflow.com/questions/2505644/git-checking-out-problem-fatal-early-eofs

I wonder if it might be worth trying the compression setting to see if that helps (less than ideal I know)

git config --add core.compression -1

i'm just heading out for a bit, i'll give that a shot when i get
home (unless someone else wants to try it first). but FWIW, i've had fetching issues before with kernel source for other builds -- it's not like raspberry pi is the only configuration where i've seen this error.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#14 lore raw
In reply to Robert P. J. Day
Quoted 44 lines · Robert P. J. Day
Quoted 13 lines · Alex J Lennon
Quoted 6 lines

Alex

Thanks I was able to download and build core-image-sato

Having discussion with github but no real solution yet.

Hi Ed, I'm glad that was useful in moving you forward. I did some googling and this issue with GitHub does seem to pop up intermittently. My gut feeling is there's some kind of resource issue, perhaps related to compression on the server. Some of the comments do seem to suggest that disabling compression helps.

Quoted 3 lines

I do wonder if someone from the Yocto project is able to fork the RPi linux repo and mirror either the Git repo itself or an archive of that (and indeed if that's a good idea)?

is there a current diagnosis for this github fetching irritation? i
thought i'd take a shot at building for rpi and, like others, i failed to fetch the kernel from github:

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository

'/home/rpjday/oe/builds/rpi/downloads/git2/github.com.raspberrypi.linux.git'...

fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:

/home/rpjday/oe/builds/rpi/tmp-eglibc/work/armv6-vfp-oe-linux-gnueabi/linux-libc-headers-raspberrypi/3.2.27-r0/temp/log.do_fetch.1278
ERROR: Task 62

Quoted 9 lines

(/home/rpjday/oe/dist/layers/meta-raspberrypi/recipes-kernel/linux-libc-headers/ linux-libc-headers-raspberrypi_3.2.27.bb,
do_fetch) failed with exit code '1'

thoughts? i've tried a few times this morning, same result each
time.

rday

I tested it today too and i ended up using a shared download directory. The problem is at github. Will submit a bug (even if somebody already did). More bugs - many changes to get it fixed soon. Keep you posted.

ag

#13 lore raw
In reply to Robert P. J. Day
Quoted 15 lines · Robert P. J. Day
Quoted 8 lines · Alex J Lennon
Quoted 3 lines · Robert P. J. Day

fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

fwiw there's a note here which relates to Cygwin:

http://stackoverflow.com/questions/2505644/git-checking-out-problem-fatal-early-eofs

Quoted 4 lines

I wonder if it might be worth trying the compression setting to see if that helps (less than ideal I know)

Quoted 8 lines
Quoted 1 line

git config --add core.compression -1

i'm just heading out for a bit, i'll give that a shot when i get
home (unless someone else wants to try it first). but FWIW, i've had fetching issues before with kernel source for other builds -- it's not like raspberry pi is the only configuration where i've seen this error.

As i said. We fixed an identical problem for fsl months ago. Fix? Github support ticket.

ag

#15 lore raw
In reply to Andrei Gherzan
Quoted 4 lines · Andrei Gherzan

I tested it today too and i ended up using a shared download directory. The problem is at github. Will submit a bug (even if somebody already did). More bugs - many changes to get it fixed soon. Keep you posted.

i'm not currently at my dev machine so i can't test this, but i
noticed a while back that even when a bitbake git fetch failed, a normal command-line "git clone" normally worked just fine.

so as a workaround, would it work to simply clone the github repo
somewhere on the dev host, then modify the recipe SRC_URI to use the "file:" protocol, point it at the local clone, do the fetch/build, and configure to create the resulting tarball, at which point you shouldn't need to clone from github again (at least until the kernel version was updated).

make sense? would this require simply changing the fetch protocol in
the kernel recipe's SRC_URI?

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#17 lore raw
In reply to a message not in the archive
Quoted 9 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

We tracked the issue down to an internal network timeout (it only happens when --quiet is used, because git is silent on the network while preparing the clone in that case). We've bumped up the limit, and you should be able to clone now. Please let us know if you have any more trouble.

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

Alex

Quoted 3 lines

Thanks
Ed

#18 lore raw
Quoted 23 lines · Alex J Lennon
Quoted 4 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

Quoted 8 lines

We tracked the issue down to an internal network timeout (it only happens when --quiet is used, because git is silent on the network while preparing the clone in that case). We've bumped up the limit, and you should be able to clone now. Please let us know if you have any more trouble.

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 7 lines

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

github has been particularly annoying with respect to this lately.
my workaround is to simply clone what you need manually, then tweak the recipe thusly to point at your local repo:

SRCREV = "10182a3bc434b27740f81c2b836a1af943060241" SRC_URI =

"git:///home/rpjday/oe/dist/t/linux;protocol=git;branch=rpi-3.2.27 \
          "

yes, it's hacky, but it lets me get back to work. sure be nice when
this silliness is resolved.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#19 lore raw
Quoted 37 lines · Robert P. J. Day
Quoted 22 lines · Alex J Lennon
Quoted 4 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

Quoted 8 lines

We tracked the issue down to an internal network timeout (it only happens when --quiet is used, because git is silent on the network while preparing the clone in that case). We've bumped up the limit, and you should be able to clone now. Please let us know if you have any more trouble.

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 7 lines

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

github has been particularly annoying with respect to this lately.
my workaround is to simply clone what you need manually, then tweak the recipe thusly to point at your local repo:

SRCREV = "10182a3bc434b27740f81c2b836a1af943060241" SRC_URI =

Quoted 8 lines
"git:///home/rpjday/oe/dist/t/linux;protocol=git;branch=rpi-3.2.27 \
           "

yes, it's hacky, but it lets me get back to work. sure be nice when
this silliness is resolved.

rday

Thanks Robert. I've got an archive I can use but wanted to see if it was working yet.

I think the fetcher archives up the retrieved git repo into a .tar.gz doesn't it in the downloads directory? Would it not help if those tarballs were mirrored so the fetcher could fall back on the mirror?

Cheers, Alex

#20 lore raw
Quoted 44 lines · Alex J Lennon
Quoted 43 lines · Robert P. J. Day
Quoted 25 lines · Alex J Lennon
Quoted 12 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

We tracked the issue down to an internal network timeout (it only happens
when --quiet is used, because git is silent on the network while preparing
the clone in that case). We've bumped up the limit, and you should be able
to clone now. Please let us know if you have any more trouble.

Quoted 3 lines

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 7 lines

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

github has been particularly annoying with respect to this lately.
my workaround is to simply clone what you need manually, then tweak the recipe thusly to point at your local repo:

SRCREV = "10182a3bc434b27740f81c2b836a1af943060241" SRC_URI =

"git:///home/rpjday/oe/dist/t/linux;protocol=git;branch=rpi-3.2.27 \
           "
Quoted 8 lines
Quoted 5 lines

yes, it's hacky, but it lets me get back to work. sure be nice when
this silliness is resolved.

rday

Thanks Robert. I've got an archive I can use but wanted to see if it was working yet.

wait a minute, what i wrote above can't be right, i have a wiki page
for this:

http://www.crashcourse.ca/wiki/index.php/Building_basic_RPi_image

which shows my recipe mods to look like:

-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27 \
+SRC_URI = "git:///home/rpjday/oe/dist/t/linux;protocol=file;branch=rpi-3.2.27 \

not sure where i got the earlier stuff i posted.

Quoted 4 lines

I think the fetcher archives up the retrieved git repo into a .tar.gz doesn't it in the downloads directory? Would it not help if those tarballs were mirrored so the fetcher could fall back on the mirror?

my setup always creates tarballs from whatever is fetched so, once
that's done, i always end up using local tarballs. i have a wiki page which explains how to create your own local mirror of tarballs:

http://www.crashcourse.ca/wiki/index.php/OE_Creating_your_%22own_mirror%22

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#21 lore raw
In reply to Alex J Lennon
Quoted 44 lines · Alex J Lennon
Quoted 43 lines · Robert P. J. Day
Quoted 22 lines · Alex J Lennon
Quoted 4 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

Quoted 8 lines

We tracked the issue down to an internal network timeout (it only happens when --quiet is used, because git is silent on the network while preparing the clone in that case). We've bumped up the limit, and you should be able to clone now. Please let us know if you have any more trouble.

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 7 lines

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'. Unable to fetch URL from any source.

github has been particularly annoying with respect to this lately.
my workaround is to simply clone what you need manually, then tweak the recipe thusly to point at your local repo:

SRCREV = "10182a3bc434b27740f81c2b836a1af943060241" SRC_URI =

"git:///home/rpjday/oe/dist/t/linux;protocol=git;branch=rpi-3.2.27 \
           "

yes, it's hacky, but it lets me get back to work. sure be nice when
this silliness is resolved.

Quoted 8 lines
Quoted 2 lines

rday

Thanks Robert. I've got an archive I can use but wanted to see if it was working yet.

I think the fetcher archives up the retrieved git repo into a .tar.gz doesn't it in the downloads directory? Would it not help if those tarballs were mirrored so the fetcher could fall back on the mirror?

Yes, that would work (it's how I use it). However, it's not tiny :-) Here's what the tarball looked like last I touched this:

-rw-rw-r-- 1 996 996 555905690 Sep 5 10:29 /work/misc/Poky/sources/git2_github.com.raspberrypi.linux.git.tar.gz

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#22 lore raw
Quoted 56 lines · Gary Thomas
Quoted 46 lines · Alex J Lennon
Quoted 45 lines · Robert P. J. Day
Quoted 23 lines · Alex J Lennon
Quoted 4 lines · Ed Nelson

I finally got a response back from github ....

Hi Ed,

Quoted 8 lines

We tracked the issue down to an internal network timeout (it only happens when --quiet is used, because git is silent on the network while preparing the clone in that case). We've bumped up the limit, and you should be able to clone now. Please let us know if you have any more trouble.

....

I have not tried it yet but hopefully they fixed the problem

I've just tried it and it is still failing -

WARNING: Failed to fetch URL
git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/data_drive/RPiMonoSmoke/yoctoProject/raspberryPiBuild/downloads/git2/github.com.raspberrypi.linux.git'...

Quoted 8 lines

fatal: read error: Connection timed out
fatal: early EOF
fatal: index-pack failed

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27'.

Unable to fetch URL from any source.

github has been particularly annoying with respect to this lately.
my workaround is to simply clone what you need manually, then tweak the recipe thusly to point at your local repo:

SRCREV = "10182a3bc434b27740f81c2b836a1af943060241" SRC_URI =

"git:///home/rpjday/oe/dist/t/linux;protocol=git;branch=rpi-3.2.27 \
           "

yes, it's hacky, but it lets me get back to work. sure be nice when
this silliness is resolved.

Quoted 8 lines
Quoted 2 lines

rday

Thanks Robert. I've got an archive I can use but wanted to see if it was working yet.

I think the fetcher archives up the retrieved git repo into a .tar.gz doesn't it in the downloads directory? Would it not help if those tarballs were mirrored so the fetcher could fall back on the mirror?

Quoted 6 lines

Yes, that would work (it's how I use it). However, it's not tiny :-) Here's what the tarball looked like last I touched this:

-rw-rw-r-- 1 996 996 555905690 Sep 5 10:29 /work/misc/Poky/sources/git2_github.com.raspberrypi.linux.git.tar.gz

Quite :) I took a look in classes/mirrors.bbclass and I see a Yocto mirror URI in there for git://

http://downloads.yoctoproject.org/mirror/sources/

I see that there are similar sized linux yocto tarballs mirrored at that location. Would it be appropriate to mirror the RPi kernel tarball up there for the time being?

Cheers, Alex