Skip to contentSkip to conversation

please pull u-boot-samsung master

U-Boot Minkyu Kang 4 participants 8 messages Jan 11, 2013 – Jan 14, 2013

lore
Share & tools
lore
#0 lore raw

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Signature · 2 lines
Thanks,
Minkyu Kang.
#1 lore raw

Hi Minkyu,

Quoted 106 lines · Minkyu Kang

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
Quoted 12 lines
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Signature · 2 lines
Thanks,
Minkyu Kang.

I'm sorry, but this branch breaks two boards:

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22, which causes the following build errors:

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Both commits are from Rajeshwari Shinde <[email protected]>, respectively with summaries:

"I2C: Driver changes for FDT support"

and

"Sound: Add FDT support to driver".

Rajesh, please fix build of VCMA9 and smdk5250. Minkyu, please integrate fixes then resubmit PR.

Amicalement,

Signature · 1 line
Albert.
#2 lore raw
Quoted 150 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 106 lines · Minkyu Kang

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
Quoted 12 lines
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Signature · 2 lines
Thanks,
Minkyu Kang.

I'm sorry, but this branch breaks two boards:

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22, which causes the following build errors:

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Both commits are from Rajeshwari Shinde <[email protected]>, respectively with summaries:

Quoted 8 lines

"I2C: Driver changes for FDT support"

and

"Sound: Add FDT support to driver".

Rajesh, please fix build of VCMA9 and smdk5250. Minkyu, please integrate fixes then resubmit PR.

... cc:ing Rajesh this time.

Amicalement,

Signature · 1 line
Albert.
#3 lore raw

Hi Albert,

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22,

Quoted 8 lines
Quoted 8 lines

which causes the following build errors:

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

I would resolve these errors sorry for inconvenience

Quoted 11 lines
Quoted 11 lines

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Sorry but I am not getting these errors could you please let me know you your environment settings to get the same.

Signature · 3 lines
Regards,
Rajeshwari Shinde
On Sat, Jan 12, 2013 at 1:31 PM, Albert ARIBAUD
Quoted 170 lines · <[email protected]> wrote:
Quoted 150 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 115 lines · Minkyu Kang

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Quoted 3 lines

--
Thanks,
Minkyu Kang.

I'm sorry, but this branch breaks two boards:

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22, which causes the following build errors:

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Both commits are from Rajeshwari Shinde <[email protected]>, respectively with summaries:

Quoted 8 lines

"I2C: Driver changes for FDT support"

and

"Sound: Add FDT support to driver".

Rajesh, please fix build of VCMA9 and smdk5250. Minkyu, please integrate fixes then resubmit PR.

... cc:ing Rajesh this time.

Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#6 lore raw
In reply to Albert ARIBAUD

Dear Albert,

Quoted 128 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 106 lines · Minkyu Kang

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
Quoted 12 lines
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Signature · 2 lines
Thanks,
Minkyu Kang.

I'm sorry, but this branch breaks two boards:

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22, which causes the following build errors:

Quoted 6 lines

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

checked.

Quoted 4 lines

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

Quoted 8 lines

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

But I could not get this result.
Did you pull all patches for sound?

commit 2b8a0533449c8c868636def683c04282a89a85cb
Sound: Add FDT support to CMD.

commit 6647c7ac8ed6ae8b5bda86df0671aea9ee3bc761
Sound: WM8994: Add FDT support to codec

commit f482310c6def17ba975a041077f89d984be54b68
Sound: Add FDT support to driver

commit 72dbff12a73291fb68d217e534eaed98d69ff5c5
EXYNOS5: FDT: Add compatible strings for sound

commit d1e8d2cad0be2f624d1d39b85c45eec7252017cd
EXYNOS5: FDT: Add sound and codec device node

commit f0b16191184e3ada6bda5b3c74302f815b719592
EXYNOS5: FDT: Add sound device node data

Quoted 6 lines

Both commits are from Rajeshwari Shinde <[email protected]>, respectively with summaries:

"I2C: Driver changes for FDT support"

Quoted 9 lines

and

"Sound: Add FDT support to driver".

Rajesh, please fix build of VCMA9 and smdk5250. Minkyu, please integrate fixes then resubmit PR.

Amicalement,

Thanks.
Minkyu Kang.

#7 lore raw

Hi Minkyu,

Quoted 171 lines · Minkyu Kang

Dear Albert,

Quoted 128 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 106 lines · Minkyu Kang

Dear Albert,

Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:

EXYNOS5: Enable console multiplexing in u-boot (2013-01-11 17:15:04 +0900)

----------------------------------------------------------------
Ajay Kumar (6):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
video: Modify exynos_fimd driver to support LCD console
EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot

Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency

Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board

Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk

Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc

Rajeshwari Shinde (22):
EXYNOS5: FDT: Add I2C device node data EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support

Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller

?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to support FALCON MODE video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards

 arch/arm/cpu/armv7/exynos/clock.c            |  272 +++++++++++++++++++++-
 arch/arm/cpu/armv7/exynos/pinmux.c           |   74 ++++++
 arch/arm/dts/exynos5250.dtsi                 |  154 ++++++++++++
 arch/arm/include/asm/arch-exynos/clk.h       |    1 +
 arch/arm/include/asm/arch-exynos/clock.h     |  276 ++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/cpu.h       |   48 +++-
 arch/arm/include/asm/arch-exynos/dp_info.h   |    2 +
 arch/arm/include/asm/arch-exynos/gpio.h      |   85 +++++++
 arch/arm/include/asm/arch-exynos/mipi_dsim.h |    7 +
 arch/arm/include/asm/arch-exynos/periph.h    |   33 +--
 arch/arm/include/asm/arch-exynos/pinmux.h    |    8 +
 arch/arm/include/asm/arch-exynos/sromc.h     |   18 ++
 board/samsung/dts/exynos5250-smdk5250.dts    |   69 ++++++
 board/samsung/smdk5250/smdk5250.c            |  237 +++++++++++++++----
 board/samsung/trats/trats.c                  |    2 +-
 common/cmd_sound.c                           |    2 +-
 doc/device-tree-bindings/exynos/isp-spi.txt  |   22 ++
 doc/device-tree-bindings/exynos/sound.txt    |   27 +++
 drivers/i2c/s3c24x0_i2c.c                    |   83 ++++++-
 drivers/i2c/s3c24x0_i2c.h                    |    8 +
 drivers/power/pmic/pmic_max77686.c           |   37 ++-
 drivers/sound/sound.c                        |  171 ++++++++------
 drivers/sound/wm8994.c                       |   74 +++++-
 drivers/sound/wm8994.h                       |    6 +-
 drivers/spi/exynos_spi.c                     |   96 +++++++-
 drivers/usb/host/ehci-exynos.c               |   92 +++++++-
 drivers/video/exynos_fb.c                    |    5 +
 drivers/video/exynos_fimd.c                  |   12 +-
 include/configs/exynos5250-dt.h              |  321 ++++++++++++++++++++++++++
 include/configs/smdk5250.h                   |  278 +---------------------
 include/configs/trats.h                      |   45 +++-
 include/fdtdec.h                             |    9 +
 include/i2c.h                                |   26 +++
Quoted 12 lines
 include/sound.h                              |    4 +-
 lib/fdtdec.c                                 |    9 +
 35 files changed, 2167 insertions(+), 446 deletions(-)
 create mode 100644 arch/arm/dts/exynos5250.dtsi
 create mode 100644 board/samsung/dts/exynos5250-smdk5250.dts
 create mode 100644 doc/device-tree-bindings/exynos/isp-spi.txt
 create mode 100644 doc/device-tree-bindings/exynos/sound.txt
 create mode 100644 include/configs/exynos5250-dt.h
Signature · 2 lines
Thanks,
Minkyu Kang.

I'm sorry, but this branch breaks two boards:

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22, which causes the following build errors:

Quoted 6 lines

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

checked.

Quoted 4 lines

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

Quoted 8 lines

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

But I could not get this result.
Did you pull all patches for sound?

commit 2b8a0533449c8c868636def683c04282a89a85cb
Sound: Add FDT support to CMD.

commit 6647c7ac8ed6ae8b5bda86df0671aea9ee3bc761
Sound: WM8994: Add FDT support to codec

commit f482310c6def17ba975a041077f89d984be54b68
Sound: Add FDT support to driver

commit 72dbff12a73291fb68d217e534eaed98d69ff5c5
EXYNOS5: FDT: Add compatible strings for sound

Quoted 6 lines

commit d1e8d2cad0be2f624d1d39b85c45eec7252017cd
EXYNOS5: FDT: Add sound and codec device node

commit f0b16191184e3ada6bda5b3c74302f815b719592
EXYNOS5: FDT: Add sound device node data

All these are in the u-boot-samsung/master branch, so yes, I necessarily pulled them when merging; besides, I tested the samsung branch alone, and the build errors are there.

Quoted 2 lines

Thanks.
Minkyu Kang.

Amicalement,

Signature · 1 line
Albert.
#4 lore raw
In reply to Rajeshwari Birje

Hi Rajeshwari,

Quoted 5 lines · Rajeshwari Birje

Hi Albert,

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22,

Quoted 2 lines
Quoted 2 lines

which causes the following build errors:

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

I would resolve these errors sorry for inconvenience

Thanks.

Quoted 12 lines
Quoted 11 lines
Quoted 11 lines

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Quoted 2 lines

Sorry but I am not getting these errors could you please let me know you your environment settings to get the same.

For some reason -- possibly commits I took in later -- I cannot reproduce the smdk5250 errors above in current u-boot-arm/master. However it still fails with warnings, both in u-boot-samsung/master and when merged into u-boot-arm/master:

exynos_dp.c: In function 'exynos_init_dp':
exynos_dp.c:860:23: warning: variable 'disp_info' set but not used [-Wunused-but-set-variable]
exynos_fb.c: In function 'draw_logo':
exynos_fb.c:74:8: warning: variable 'addr' set but not used [-Wunused-but-set-variable]
exynos_fb.c:73:9: warning: variable 'y' set but not used [-Wunused-but-set-variable]
exynos_fb.c:73:6: warning: variable 'x' set but not used [-Wunused-but-set-variable]

Tested with with both ELDK 5.3: gcc version 4.7.2, and the Linaro ARM GCC from Ubuntu (gcc version 4.7.2: Ubuntu/Linaro 4.7.2-1ubuntu1.

Quoted 2 lines

Regards,
Rajeshwari Shinde

Amicalement,

Signature · 1 line
Albert.
#5 lore raw

Hi Albert,

Quoted 40 lines · Albert ARIBAUD

Hi Rajeshwari,

Quoted 5 lines · Rajeshwari Birje

Hi Albert,

- VCMA9 is broken by commit a9d2ae7014d9e66dde6dd4a344308449508e4a22,

Quoted 2 lines
Quoted 2 lines

which causes the following build errors:

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines

In file included from s3c24x0_i2c.c:40:0:
s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not
in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning:
'i2c_busses' defined but not used [-Wunused-variable]

I would resolve these errors sorry for inconvenience

Thanks.

Quoted 12 lines
Quoted 11 lines
Quoted 11 lines

- smdk5250 is broken by commit f482310c6def17ba975a041077f89d984be54b68 which causes the following build errors:

sound.c: In function 'codec_init':
sound.c:151:4: warning: passing argument 1 of 'wm8994_init' discards 'const' qualifier from pointer target type [enabled by default] In file included from sound.c:33:0: wm8994.h:83:5: note: expected 'struct sound_codec_info *' but argument is of type 'const void *' cmd_sound.c:
In function 'do_init': cmd_sound.c:36:2: error: too few arguments to function 'sound_init' In file included from cmd_sound.c:27:0:
/home/albert/src/u-boot-arm/include/sound.h:52:5: note: declared here

Quoted 2 lines

Sorry but I am not getting these errors could you please let me know you your environment settings to get the same.

For some reason -- possibly commits I took in later -- I cannot reproduce the smdk5250 errors above in current u-boot-arm/master. However it still fails with warnings, both in u-boot-samsung/master and when merged into u-boot-arm/master:

Quoted 10 lines

exynos_dp.c: In function 'exynos_init_dp':
exynos_dp.c:860:23: warning: variable 'disp_info' set but not used [-Wunused-but-set-variable]
exynos_fb.c: In function 'draw_logo':
exynos_fb.c:74:8: warning: variable 'addr' set but not used [-Wunused-but-set-variable]
exynos_fb.c:73:9: warning: variable 'y' set but not used [-Wunused-but-set-variable]
exynos_fb.c:73:6: warning: variable 'x' set but not used [-Wunused-but-set-variable]

Sorry for the warning messages.
I have sent the patches to fix these warnings. Hopefully Minkyu will review and get them merged, soon.

Quoted 6 lines

Tested with with both ELDK 5.3: gcc version 4.7.2, and the Linaro ARM GCC from Ubuntu (gcc version 4.7.2: Ubuntu/Linaro 4.7.2-1ubuntu1.

Quoted 2 lines

Regards,
Rajeshwari Shinde

Quoted 7 lines

Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Regards,
Ajay