Skip to contentSkip to conversation

arm64: Request to add error code

DISCUSSION André Hentschel 2 participants 3 messages Jan 14, 2013 – Jan 15, 2013 Generic include/asm header files

lore
Share & tools
lore
#0 lore raw

Hi,
i'm new to the list (my first kernel mailing list).
I'd like to request to add a way to distinguish a read from a write pagefault in userspace on arm64(aarch64). (That's e.g. in a SIGSEGV handler attached with sigaction and SA_SIGINFO)
On arm you can use the bit at 0x800 in uc_mcontext.error_code to know which kind it is, but on arm64 i can't find a way. (On most other popular architectures you can get that information, too)
I'd suggest to add a flag to siginfo.si_errno, or to make the esr available to the SIGSEGV handler. Any hints or suggestions?

Signature · 1 line
Best Regards, André Hentschel
#1 lore raw

Hi André,

Quoted 6 lines · André Hentschel

i'm new to the list (my first kernel mailing list).
I'd like to request to add a way to distinguish a read from a write pagefault in userspace on arm64(aarch64). (That's e.g. in a SIGSEGV handler attached with sigaction and SA_SIGINFO)
On arm you can use the bit at 0x800 in uc_mcontext.error_code to know which kind it is, but on arm64 i can't find a way. (On most other popular architectures you can get that information, too)
I'd suggest to add a flag to siginfo.si_errno, or to make the esr available to the SIGSEGV handler.

The problem with exposing ESR directly to user is that it depends on the MMU configuration (e.g. on Cortex-A15 (32-bit) you have different formats based on whether you have LPAE enabled or not, though the 'write' bit happens to be in the same position).

siginfo for SIGSEGV gives the fault address and type information but, as you noticed, doesn't say whether it's a read or write. What do you need this information for?

Signature · 1 line
Catalin
#2 lore raw

Am 15.01.2013 11:47, schrieb Catalin Marinas:

Quoted 10 lines

Hi André,

Quoted 6 lines · André Hentschel

i'm new to the list (my first kernel mailing list).
I'd like to request to add a way to distinguish a read from a write pagefault in userspace on arm64(aarch64). (That's e.g. in a SIGSEGV handler attached with sigaction and SA_SIGINFO)
On arm you can use the bit at 0x800 in uc_mcontext.error_code to know which kind it is, but on arm64 i can't find a way. (On most other popular architectures you can get that information, too)
I'd suggest to add a flag to siginfo.si_errno, or to make the esr available to the SIGSEGV handler.

Quoted 9 lines

The problem with exposing ESR directly to user is that it depends on the MMU configuration (e.g. on Cortex-A15 (32-bit) you have different formats based on whether you have LPAE enabled or not, though the 'write' bit happens to be in the same position).

siginfo for SIGSEGV gives the fault address and type information but, as you noticed, doesn't say whether it's a read or write. What do you need this information for?

Thanks for the answer and the confirmation.
I'm porting Wine to arm64, some winelib applications may rely on the information in case they handle the exception.

Signature · 1 line
Best Regards, André Hentschel