Skip to contentSkip to conversation

extcon for v3.9

GIT PULL Chanwoo Choi 2 participants 3 messages Jan 16, 2013

lore
Share & tools
lore
#0 lore raw

Hi Greg,

This is the extcon pull request for v3.9.

I don't send separate pull request of extcon about bugfixes patch. I'd like to apply this patch-set to your next branch for v3.9.

Please pull extcon with following updates.

Update to max77693/max8997 extcon driver:
- Using MHL_TA cable for charging.
- Support JIG cable.
- Support Dock-Audio device for playing music and button of device.
- Support Dock-Smart device for desktop mode with mouse/keyboard.
- Set default UART/USB path on probe().
- Check the state/type of cable after completing initialization.
- Code clean to remove duplicate code and bug fix related to sequence of interrupt.
- Fix irq_flag of max8997/max77693 driver.

Update to arizona extcon driver:
- Headphone measurements.
- Alternative detection mechanism for non-default system designs.
- Microphone clamp integration.
- Support for additional detection pin.
- MICBIAS rise time configuration.

Best regards,
Chanwoo Choi

The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-for-3.9

for you to fetch changes up to 689557d3c7045320958d5bc4141088f7b4dff7ba:

mfd: wm5102: Add microphone clamp control registers (2013-01-15 15:42:18 +0900)

----------------------------------------------------------------
Chanwoo Choi (9):
extcon: max77693: Remove duplicate code by making function
extcon: max77693: Add support MHL_TA cable for charging battery
extcon: max77693: Add support jig cable
extcon: max77693: Add support dock device and buttons
extcon: max77693: Check the state/type of cable after boot completed
extcon: max8997/max77693: Support IRQF_NO_SUSPEND flag for interrupt
extcon: max77693: Set default uart/usb path by using platform data
extcon: max77693: Fix bug when detecting MHL/Dock-Audio with USB/TA cable
extcon: max77693: Add support Dock-Smart device for desktop mode

Mark Brown (11):
extcon: arizona: Convert to devm_input_allocate_device()
extcon: arizona: Remove duplicate mic ramp configuration
extcon: arizona: Only set GPIO if it has been requested
extcon: arizona: Allow configuration of MICBIAS rise time
extcon: arizona: Use microphone clamp function if available
extcon: arizona: Support use of GPIO5 as an input to jack detection
extcon: arizona: Enable basic headphone identification
extcon: Simple code motion supporting future work.
extcon: arizona: Support HPDET based accessory identification
extcon: arizona: Support direct microphone measurement via HPDET
mfd: wm5102: Add microphone clamp control registers

 drivers/extcon/extcon-arizona.c       | 634 +++++++++++++++++++++--
 drivers/extcon/extcon-max77693.c      | 920 +++++++++++++++++++++++++---------
 drivers/extcon/extcon-max8997.c       |   6 +-
 drivers/mfd/wm5102-tables.c           |  10 +
 include/linux/mfd/arizona/core.h      |   4 +-
 include/linux/mfd/arizona/pdata.h     |  12 +
 include/linux/mfd/arizona/registers.h |  48 ++
 include/linux/mfd/max77693-private.h  |  86 ++++
 include/linux/mfd/max77693.h          |   9 +
 9 files changed, 1439 insertions(+), 290 deletions(-)
#1 lore raw
Quoted 29 lines · Chanwoo Choi

Hi Greg,

This is the extcon pull request for v3.9.

I don't send separate pull request of extcon about bugfixes patch. I'd like to apply this patch-set to your next branch for v3.9.

Please pull extcon with following updates.

Update to max77693/max8997 extcon driver:
- Using MHL_TA cable for charging.
- Support JIG cable.
- Support Dock-Audio device for playing music and button of device.
- Support Dock-Smart device for desktop mode with mouse/keyboard.
- Set default UART/USB path on probe().
- Check the state/type of cable after completing initialization.
- Code clean to remove duplicate code and bug fix related to sequence of interrupt.
- Fix irq_flag of max8997/max77693 driver.

Update to arizona extcon driver:
- Headphone measurements.
- Alternative detection mechanism for non-default system designs.
- Microphone clamp integration.
- Support for additional detection pin.
- MICBIAS rise time configuration.

Best regards,
Chanwoo Choi

Quoted 7 lines

The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-for-3.9

Pulled and pushed out, thanks.

greg k-h

#2 lore raw
Quoted 32 lines · Greg KH
Quoted 31 lines · Chanwoo Choi

Hi Greg,

This is the extcon pull request for v3.9.

I don't send separate pull request of extcon about bugfixes patch. I'd like to apply this patch-set to your next branch for v3.9.

Please pull extcon with following updates.

Update to max77693/max8997 extcon driver:
- Using MHL_TA cable for charging.
- Support JIG cable.
- Support Dock-Audio device for playing music and button of device.
- Support Dock-Smart device for desktop mode with mouse/keyboard.
- Set default UART/USB path on probe().
- Check the state/type of cable after completing initialization.
- Code clean to remove duplicate code and bug fix related to sequence of interrupt.
- Fix irq_flag of max8997/max77693 driver.

Update to arizona extcon driver:
- Headphone measurements.
- Alternative detection mechanism for non-default system designs.
- Microphone clamp integration.
- Support for additional detection pin.
- MICBIAS rise time configuration.

Best regards,
Chanwoo Choi

The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

Quoted 8 lines
Quoted 5 lines

Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-for-3.9

Pulled and pushed out, thanks.

Thank you for pulling and comment.

Best Regards,
Chanwoo Choi