How to build the build appliance?
Hi there,
I've seen some work already went into building a Yocto build appliance which runs on VMware [1]. I think that's a great tool to get started. Has the appliance been built by hand or is the process somewhat automated? I couldn't find any references in Poky.
Cheers,
Tino
[1] https://www.yoctoproject.org/documentation/build-appliance-manual
Hello Tino,
Here is what I know on the matter:
1) you need to set MACHINE = "qemux86-64" in local.conf
2) run "bitbake build-appliance-image"
3) check the tmp/deploy/images folder for the output
Regards,
Cornel
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tino Breddin
Sent: Friday, January 25, 2013 1:32 PM
To: yocto
Subject: [yocto] How to build the build appliance?
Hi there,
I've seen some work already went into building a Yocto build appliance which runs on VMware [1]. I think that's a great tool to get started. Has the appliance been built by hand or is the process somewhat automated? I couldn't find any references in Poky.
Cheers,
Tino
[1] https://www.yoctoproject.org/documentation/build-appliance-manual
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
It also work with a qemux86 machine.
Regards,
Cristian
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Stoicescu, CorneliuX
Sent: Friday, January 25, 2013 5:18 PM
To: Tino Breddin; yocto
Subject: Re: [yocto] How to build the build appliance?
Hello Tino,
Here is what I know on the matter:
1) you need to set MACHINE = "qemux86-64" in local.conf
2) run "bitbake build-appliance-image"
3) check the tmp/deploy/images folder for the output
Regards,
Cornel
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tino Breddin
Sent: Friday, January 25, 2013 1:32 PM
To: yocto
Subject: [yocto] How to build the build appliance?
Hi there,
I've seen some work already went into building a Yocto build appliance which runs on VMware [1]. I think that's a great tool to get started. Has the appliance been built by hand or is the process somewhat automated? I couldn't find any references in Poky.
Cheers,
Tino
[1] https://www.yoctoproject.org/documentation/build-appliance-manual
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Great, building and testing it now.
Thanks for the pointer!
Quoted 30 lines · CorneliuX
Hello Tino,
Here is what I know on the matter:
1) you need to set MACHINE = "qemux86-64" in local.conf
2) run "bitbake build-appliance-image"
3) check the tmp/deploy/images folder for the outputRegards,
Cornel-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tino Breddin
Sent: Friday, January 25, 2013 1:32 PM
To: yocto
Subject: [yocto] How to build the build appliance?Hi there,
I've seen some work already went into building a Yocto build appliance which runs on VMware [1]. I think that's a great tool to get started. Has the appliance been built by hand or is the process somewhat automated? I couldn't find any references in Poky.
Cheers,
Tino[1] https://www.yoctoproject.org/documentation/build-appliance-manual
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto