pulseaudio madness
I have a multi-media application/system (built with Poky/Yocto of course) that is currently using ALSA for the sound. This works great but now I'd like to be able to share some of the sound resources, in particular the audio output (speakers). To satisfy this, I looked at pulseaudio, but I'm overwhelmed by the package choices (there are 120 packages), not to mention what to do about configuration.
I don't see any examples (images, etc) that use pulseaudio.
Does anyone have any recommendations on what I might need to install, how to configure it, etc, to take over from my simple ALSA setup?
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Hi Gary,
Quoted 11 lines · Gary Thomas
I have a multi-media application/system (built with Poky/Yocto of course) that is currently using ALSA for the sound. This works great but now I'd like to be able to share some of the sound resources, in particular the audio output (speakers). To satisfy this, I looked at pulseaudio, but I'm overwhelmed by the package choices (there are 120 packages), not to mention what to do about configuration.
I don't see any examples (images, etc) that use pulseaudio.
Does anyone have any recommendations on what I might need to install, how to configure it, etc, to take over from my simple ALSA setup?
The top tip is the PulseAudio documentation on the web site, that lists all the plugins and what they do. The pulseaudio-server package depends on all of the important plugins, so that gives you a working PA setup once you've started it.
You might want to have a look at Guacamayo's use of PA, that uses it and will automatically switch output when new speakers are plugged in
too. https://github.com/Guacamayo
Ross
Quoted 15 lines · Ross
Hi Gary,
Quoted 11 lines · Gary Thomas
I have a multi-media application/system (built with Poky/Yocto of course) that is currently using ALSA for the sound. This works great but now I'd like to be able to share some of the sound resources, in particular the audio output (speakers). To satisfy this, I looked at pulseaudio, but I'm overwhelmed by the package choices (there are 120 packages), not to mention what to do about configuration.
I don't see any examples (images, etc) that use pulseaudio.
Does anyone have any recommendations on what I might need to install, how to configure it, etc, to take over from my simple ALSA setup?
Quoted 8 lines
The top tip is the PulseAudio documentation on the web site, that lists all the plugins and what they do. The pulseaudio-server package depends on all of the important plugins, so that gives you a working PA setup once you've started it.
You might want to have a look at Guacamayo's use of PA, that uses it and will automatically switch output when new speakers are plugged in
too. https://github.com/Guacamayo
Thanks, that helped. I've built Guacamayo for my RaspberryPi and can see how it's set up.
One thing I'm missing is how the pulseaudio server gets started?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 22 lines · Gary Thomas
Quoted 21 lines · Ross
Hi Gary,
Quoted 8 lines · Gary Thomas
I have a multi-media application/system (built with Poky/Yocto of course)
that is currently using ALSA for the sound. This works great but now I'd like to be able to share some of the sound resources, in particular the audio output (speakers). To satisfy this, I looked at pulseaudio, but I'm overwhelmed by the package choices (there are 120 packages), not to mention what to do about configuration.Quoted 4 lines
I don't see any examples (images, etc) that use pulseaudio.
Does anyone have any recommendations on what I might need to install, how to configure it, etc, to take over from my simple ALSA setup?
The top tip is the PulseAudio documentation on the web site, that lists all the plugins and what they do. The pulseaudio-server package depends on all of the important plugins, so that gives you a working PA setup once you've started it.
Quoted 8 lines
Quoted 3 lines
You might want to have a look at Guacamayo's use of PA, that uses it and will automatically switch output when new speakers are plugged in
too. https://github.com/GuacamayoThanks, that helped. I've built Guacamayo for my RaspberryPi and can see how it's set up.
One thing I'm missing is how the pulseaudio server gets started?
Depends on the image type, either from /eta/xdg/autostart, or for the audiplayer image from the /etc/init.d/guacamayo-session-* script.
Tomas
Quoted 21 lines · Gary Thomas
Quoted 20 lines · Ross
Hi Gary,
Quoted 11 lines · Gary Thomas
I have a multi-media application/system (built with Poky/Yocto of course) that is currently using ALSA for the sound. This works great but now I'd like to be able to share some of the sound resources, in particular the audio output (speakers). To satisfy this, I looked at pulseaudio, but I'm overwhelmed by the package choices (there are 120 packages), not to mention what to do about configuration.
I don't see any examples (images, etc) that use pulseaudio.
Does anyone have any recommendations on what I might need to install, how to configure it, etc, to take over from my simple ALSA setup?
The top tip is the PulseAudio documentation on the web site, that lists all the plugins and what they do. The pulseaudio-server package depends on all of the important plugins, so that gives you a working PA setup once you've started it.
Quoted 6 lines
Quoted 3 lines
You might want to have a look at Guacamayo's use of PA, that uses it and will automatically switch output when new speakers are plugged in
too. https://github.com/GuacamayoThanks, that helped. I've built Guacamayo for my RaspberryPi and can see how it's set up.
That said, I've not had much luck actually getting anything out of the audio :-( I tried the guacamayo-image-mex-raspberrypi.rpi-sdimg which came up and gave me a nice display but it wasn't obvious how to import media and/or make it play. I tried copying some files manually to the SD card, but they wouldn't play either.
Then I tried guacamayo-image-audioplayer-raspberrypi.rpi-sdimg and it was even less intuitive.
Can you give me some guidance? All I'd like to do is play a simple (.wav) file on y RaspberryPi using pulseaudio.
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 4 lines · Gary Thomas
Quoted 4 lines
Quoted 3 lines
You might want to have a look at Guacamayo's use of PA, that uses it and will automatically switch output when new speakers are plugged in
too. https://github.com/Guacamayo
Quoted 8 lines
Quoted 2 lines
Thanks, that helped. I've built Guacamayo for my RaspberryPi and can see how it's set up.
That said, I've not had much luck actually getting anything out of the audio :-( I tried the guacamayo-image-mex-raspberrypi.rpi-sdimg which came up and gave me a nice display but it wasn't obvious how to import media and/or make it play. I tried copying some files manually to the SD card, but they wouldn't play either.
Both the guacamayo mex and audioplayer images are for UPnP appliances, i.e., they generally expect to find content on the network, provided by UPnP media servers (i.e., a NAS).
The mex image is not really much use on the RPi, the HW is too underpowered to run a non-trivial GL application. But you can put the audio files into the xuser's Music directory (or with the demo files into /usr/share/demos/audio) and they should appear in the Music column of MEX.
Quoted 2 lines
Then I tried guacamayo-image-audioplayer-raspberrypi.rpi-sdimg and it was even less intuitive.
You need a UPnP media controller to interact with the audioplayer. BubbleUPnP for Android works very well.
Quoted 2 lines
Can you give me some guidance? All I'd like to do is play a simple (.wav) file on y RaspberryPi using pulseaudio.
gst-launch playbin2 uri=file:///... should do that for you.
Tomas
Signature · 1 line
http://sleepfive.com